Search

The urgent need for real-time and noninvasive monitoring of health-associated biochemical parameters has motivated the development of wearable sweat sensors. Existing electrochemical sensors show promise in real-time analysis of various chemical biomarkers. These sensors often rely on labels and redox probes to generate and amplify the signals for the detection and quantification of analytes with limited sensitivity. In this study, we introduce a molecularly imprinted polymer (MIP)-based biochemical sensor to quantify a molecular biomarker in sweat using electrochemical impedance spectroscopy, which eliminates the need for labels or redox probes. The molecularly imprinted biosensor can achieve sensitive and specific detection of cortisol at concentrations as low as 1 pM, 1000-fold lower than previously reported MIP cortisol sensors. We integrated multimodal electrochemical sensors with an iontophoresis sweat extraction module and paper microfluidics for real-time sweat analysis. Several parameters can be simultaneously quantified, including sweat volume, secretion rate, sodium ion, and cortisol concentration. Paper microfluidic modules not only quantify sweat volume and secretion rate but also facilitate continuous sweat analysis without user intervention. While we focus on cortisol sensing as a proof-of-concept, the molecularly imprinted wearable sensors can be extended to real-time detection of other biochemicals, such as protein biomarkers and therapeutic drugs.

Captopril (CP) is commonly used as an active enzyme inhibitor for the treatment of coronary heart disease, hypertension and angina pectoris. The development of sensitive and efficient method for CP analysis is of great importance in biomedical research. Herein, we fabricated a sensitive and robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH 2 @ZIF-8 and Co, N-doped carbon nanozymes with oxidase-mimicking activity for accurate monitoring of captopril. The hydrogel-assisted paper-based sensor appeared a visible pink signal due to the catalytic oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) to oxDPD by Co, N-doped carbon-based nanozymes, and resulted in the fluorescence quenching of UiO-66-NH 2 @ZIF-8. In the presence of captopril, the oxidation of chromogenic substrate DPD by Co, N-doped nanozymes in the hydrogel-assisted paper-based sensor was hindered and accompanied by a change in the visible color, leading to recovery of the fluorescence of UiO-66-NH 2 @ZIF-8, and the change in the fluorescence color could also be observed. Therefore, the quantitative detection of captopril is achieved by taking a smartphone photograph and converting the image parameters into data information using ImageJ software. The portable hydrogel-assisted paper sensor provided sensitive detection of captopril in two modes based on visible color change as well as fluorescence color change with limits of detection of 0.45 μM and 0.47 μM, respectively. This hydrogel-assisted paper-based sensor has been successfully applied to the accurate monitoring of captopril in human serum, providing a potential avenue for in situ detection of captopril., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

This work reports the development of low-cost and rapid multiplexed colorimetric assay of antioxidants (total phenolics, antioxidant capacity, flavonoids and anthocyanins) in wines at daisy-shaped fluidic paper-based analytical devices (PADs). The desired fluidic patterns were formed on paper by pen drawing and colorimetric reagents were immobilized at the 6 peripheral test zones. The sample was added at the central sample zone, migrated to the test zones and reacted with the immobilized reagents producing characteristic colors that were captured and analyzed. The paper-based approach was applied to the analysis of several wine samples and the results were statistically correlated to standard solution-based colorimetric assays, indicating that it could be reliably used for ranking wines according to their antioxidants content. In addition, the paper-based analytical methodology is simple, instrument-free, portable, cost-effective, rapid and environment friendly., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study evaluated the fate of food delivery boxes when subjected to biological treatments, reproducing at the lab-scale the conditions of full-scale plants. Four paper-based boxes were composted: two made of paper only, one coupled with polylactic acid (PLA), and one with a barrier coating. One paper only box and the box with PLA were also investigated for their anaerobic degradability with biochemical methane potential (BMP) and semi-continuous tests. During composting, the boxes were not recognisable inside the compost after four (paper only boxes), eight (box with PLA), and twelve (box with barrier coating) weeks. In BMP tests, the paper only box showed a degradability similar to that of food waste (92 %), while the box with PLA degraded only at 76 %. Furthermore, undigested pieces of PLA were found in semi-continuous tests. Accordingly, paper resulted suitable for biological treatments, while the presence of PLA or other barrier coatings can be critical., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Non-targeted analysis and suspect screening of per- and polyfluoroalkyl substances (PFAS) in various matrices have gained traction with advancements in accurate mass analytical instruments. This study employed ultra-high performance liquid chromatography coupled to quadrupole orbitrap high-resolution mass spectrometry for PFAS suspect screening of paper grades used in the paper recycling chain. The samples were prepared using two extraction techniques; selective accelerated solvent extraction with weak anionic exchange solid-phase extraction and non-selective ultrasonic-assisted extraction. A suspect screening protocol was established to tentatively identify suspected PFAS against spectral databases using a systematic approach of peak filtering and study-specific thresholds for reporting, linked to a confidence level. The possible prevalence of previously unreported PFAS in several paper materials across the various collection sites in the paper recycling chain was inferred by the common detection of short-chain polyfluoroalkyl ketones and diketones in the paper recycling chain. The suspect screening tentatively identified 41 unique PFAS, with 3 common to both pre-treatment techniques. The detection of unique PFAS by the two sample pre-treatment techniques highlighted the significance of both selective and non-selective extraction in PFAS screening endeavours. Further, it showed the importance of understanding the acquisition mechanisms employed in mass spectrometry where data-dependent acquisition triggered fragmentation in certain identified compounds, and not in others. The tentatively identified PFAS indicated that there were several previously unreported PFAS in the paper recycling chain and that additional studies were required to investigate their abundance, possible persistence, bioaccumulation and toxicity, in relation to their functional groups and carbon chains., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Nondumiso Mofokeng reports funding was provided by Mpact Operations Pty (Ltd). All other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

A colorimetric sensing method based on a paper-based vapor-test kit was successfully developed for the selective and sensitive real-time monitoring of formalin in food samples. The device was specifically designed to efficiently extract and detect formalin simultaneously. A microcentrifuge tube was used as the sample solution container, with the inner cap serving as the reaction and detection zone. Formalin was converted into gaseous formaldehyde through controlled heating, which was then extracted and collected on a filter paper coated with Nash's reagent. The color change on paper was used for formalin quantification using a smartphone for detection and image analysis. Under optimal conditions, our method provided a linear range of 0.5-75 mg L -1 with a detection limit of 0.11 mg L -1 . This method effectively determined formalin in fresh food and vegetable samples, with recoveries ranging from 92 to 111%, demonstrating comparable accuracy to the standard method for practical food quality control and safety., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Laboratory-based nucleic acid amplification tests (NAATs) are highly sensitive and specific, but they require the transportation of samples to centralized testing facilities and have long turnaround times. During the Coronavirus Disease 2019 (COVID-19) pandemic, substantial advancement has been achieved with the development of paper-based point-of-care (POC) NAATs, offering features such as low cost, being easy to use, and providing rapid sample-to-answer times. Although most of the POC NAATs innovations are towards clinical settings, we have developed a portable, paper-based loop-mediated isothermal amplification (LAMP) testing platform for on-farm applications, capable of detecting Bacteroidales as a fecal contamination biomarker. Our integrated platform includes a drop generator, a heating and imaging unit, and paper-based biosensors, providing sensitive results (limit of detection 3 copies of Bacteroidales per cm 2 ) within an hour of sample collection. We evaluated this integrated platform on a commercial lettuce farm with a concordance of 100% when compared to lab-based tests. Our integrated paper-based LAMP testing platform holds great promise as a reliable and convenient tool for on-site NAATs. We expect that this innovation will encourage the fresh produce industry to adopt NAATs as a complementary tool for decision-making in growing and harvesting. We also hope that our work can stimulate further research in the development of on-farm diagnostic tools for other agricultural applications, leading to improved food safety and technology innovation., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Mohit S. Verma reports financial support was provided by Center For Produce Safety. Mohit S. Verma reports financial support was provided by California Department of Food and Agriculture. Mohit S. Verma reports financial support was provided by Agricultural Marketing Service. Mohit S. Verma reports a relationship with Krishi, Inc. that includes: board membership, equity or stocks, and funding grants. Mohit S. Verma has patent pending to Purdue Research Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

The success of polymerase chain reaction (PCR) depends on the quality of deoxyribonucleic acid (DNA) templates. This study developed a cost-effective and eco-friendly DNA extraction system utilizing poly(3,4-dihydroxyphenylalanine)-modified cellulose paper (polyDOPA@paper). PolyDOPA@paper was prepared by oxidatively self-polymerizing DOPA under weak alkaline conditions and utilizing the adhesive property of polyDOPA on different materials. Compared to the uncoated cellulose paper, polyDOPA coating significantly enhances DNA adsorption owing to its abundant amino, carboxyl, and hydroxyl moieties. The DNA extraction mechanism using polyDOPA@paper was discussed. The maximum adsorption capacity of polyDOPA@paper for DNA was 20.7 μg cm -2 . Moreover, an automated extraction system was designed and fabricated using 3D printing technology. The device simplifies the operation and ensures the reproducibility and consistency of the results. More importantly, it eliminates the need for specialized training of operators. The feasibility of the polyDOPA@paper-based automated extraction system was evaluated by quantitatively detecting Escherichia coli in spiked milk samples via a real-time PCR. The detection limit was 10 2 cfu mL -1 . The results suggest that the system would have significant potential in detecting pathogens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Exhaled breath electrochemical sensing is a promising biomedical technology owing to its portability, painlessness, cost-effectiveness, and user-friendliness. Here, we present a novel approach for target analysis in exhaled breath by integrating a comfortable paper-based collector into an N95 face mask, providing a universal solution for analyzing several biomarkers. As a model analyte, we detected SARS-CoV-2 spike protein from the exhaled breath by sampling the target analyte into the collector, followed by its detection out of the N95 face mask using a magnetic bead-based electrochemical immunosensor. This approach was designed to avoid any contact between humans and the chemicals. To simulate human exhaled breath, untreated saliva samples were nebulized on the paper collector, revealing a detection limit of 1 ng/mL and a wide linear range of 3.7-10,000 ng/mL. Additionally, the developed immunosensor exhibited high selectivity toward the SARS-CoV-2 spike protein, compared to other airborne microorganisms, and the SARS-CoV-2 nucleocapsid protein. Accuracy assessments were conducted by analyzing the simulated breath samples spiked with varying concentrations of SARS-CoV-2 spike protein, resulting in satisfactory recovery values (ranging from 97 ± 4 to 118 ± 1%). Finally, the paper-based hybrid immunosensor was successfully applied for the detection of SARS-CoV-2 in real human exhaled breath samples. The position of the collector in the N95 mask was evaluated as well as the ability of this paper-based analytical tool to identify the positive patient.

Nitric oxide (NO) in human tears regulates numerous ocular surface processes, such as tear generation, corneal wound healing, conjunctival vascular tone, and so forth. Any deviation from its normal concentration is linked to various ocular syndromes, including microbial keratitis, conjunctivitis, pterygium, dry eye, retinitis, glaucoma, and so forth. Therefore, precise monitoring of NO in tears can be considered as a potential biomarker for ocular diseases. Here, we report a highly sensitive and selective electrochemical NO sensor using carbon ink-based electrodes. Counter, working (WE), and reference electrodes have been designed and painted on a butter paper by using carbon ink. To improve the sensing performance, the WE has been modified with a gold nanoparticle (Au NP)-deposited carbon cloth (CC). Such a paper-based sensor demonstrated high sensitivity of ∼0.34 μA μM -1 cm -2 , ultralow detection limit of ∼2.35 nM, wide linear range of 10 nM-0.4 mM, and fast response time (0.35 s). The sensor also showed excellent stability and selectivity toward the interfering agents in human body fluids. Such a low-cost, flexible paper-based sensor was employed for the detection of NO in artificial tears.

Background: Human sweat can be collected non-invasively with low infectivity; however, its application as a determination method has been challenged due to the presence of trace amounts of chiral metabolites. Moreover, its application as a biological fluid for disease diagnosis has not been previously reported. In this study, the human dried sweat spot paper (DSSP) method was proposed for the derivatization of a novel mass spectrometric chiral probe, N-[1-Oxo-5-(triphenylphosphonium) pentyl]-(S)-3-aminopyrrolidine (OTPA), determination and resolution of DL-lactic acid (DL-LA) enantiomers in human elbow sweat., Results: The methodological validation revealed the resolution (Rs) as 1.78, the limit of detection (S/N = 3) as 20.83 fmol, good linearity (R 2  ≥ 0.9996), and the intra-day and intra-day stability with RSD ranging from 0.53 to 10.85 %, while the average recovery rate of D-LA and L-LA were 104.00 % ± 4.68 % and 107.41 % ± 8.34 %, respectively, with high accuracy. In addition, the method was applied for the determination of DL-LA in the sweat on elbow of 10 healthy volunteers and 30 diabetic patients. The results demonstrated that the D/L ratio and L/D ratio were significantly different (p < 0.0001). In addition, a moderate positive linear correlation between the D/L-LA ratio in human sweat and fasting blood glucose level (r = 0.7744, p < 0.0001) was observed, thereby suggesting that the D/L ratio of lactate in human sweat correlate the glucose level in human fasting blood., Significance and Novelty: The D/L lactate ratio in human sweat could be used as a potential biomarker for diabetes screening. The method can be used to screen for diabetes by providing a dry sweat paper to test equipment and has the potential to be a non-invasive early-warning diagnostic tool for diabetes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The detections of H 2 O 2 and catalase play an important role in daily life. This study introduces a paper-based flow sensor that is specifically designed to detect H 2 O 2 and catalase. The sensor utilizes a hydrogel composed of cross-linked 4-carboxyphenylboronic acid and polyvinyl alcohol. When H 2 O 2 is in contact with the hydrogel, the B-C bonds of the hydrogel undergo a reactive process, causing decomposition of the hydrogel. The pH indicator strip enables the visual monitoring of the viscosity change that occurs during the gel-sol transition. The quantification of H 2 O 2 is accomplished by assessing the proportion of water coverage on the pH indicator strip. The sensor shows a detection limit of 0.077 wt% and is applicable for the quantitative measurement of H 2 O 2 in routinely used disinfectants. Furthermore, the presence of catalase is effectively identified and the detection of catalase in milk is successfully fulfilled. In summary, this work proposes a simple, user-friendly, label-free, and cost-effective method for constructing a paper-based flow sensor using borate cross-linked polyvinyl alcohol hydrogel, showing great potential for detecting H 2 O 2 and catalase in various practical scenarios., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, a sustainable 3D carbon aerogel (AO-WPC) is prepared from waste paper (WP), and used for efficient antibiotics removal from water. The AO-WPC aerogel shows good mechanical property and can recover after 100th of 30 % compression strain. The specific surface area of AO-WPC aerogel is up to 654.58 m 2 /g. More importantly, this aerogel reveals proper pore size distribution, including micro sized macropores between carbon fibers and intrinsic nano scale mesopores (11.86 nm), which is conducive to remove antibiotics from water. Taking tetracycline (Tc) as an example, the maximum adsorption capacity and adsorption rate of AO-WPC for Tc are as high as 384.6 mg/g and 0.510 g/(mg‧min), respectively, which exhibits significant advantages over most of the recent absorbents, and the adsorption toward Tc reveals good resistance to various environmental factors, including pH, various ions, and dissolved organic matter (DOM). Moreover, good thermal stability enables the AO-WPC aerogel to be regenerated through simple burning, and the adsorption capacity of Tc only decreases by 10.4 % after 10 cycles. Mechanism research shows that hydrogen bonding and π-π electron-donor-acceptor (EDA) interaction play the important role in the adsorption. The excellent mechanical property and adsorption performance imply good practical prospect of the AO-WPC aerogel., Competing Interests: Declaration of Competing Interest We declare no conflict of interest. This manuscript has not been published or presented elsewhere in part or in entirety, and is not under consideration by another journal. There are no conflicts of interest to declare. All authors have contributed to, read, and approved this submitted manuscript in its current form., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Timely and rapid detection of antibiotic residues in the environment is conducive to safeguarding human health and promoting an ecological virtuous cycle. A foldable paper-based photoelectrochemical (PEC) sensor was successfully developed for the detection of ampicillin (AMP) based on glutathione/zirconium dioxide hollow nanorods/aptamer (GSH@ZrO 2 HS@apt) modified cellulose paper as a reactive zone with laser direct-writing lead sulfide/cadmium sulfide/graphene (PbS/CdS/LIG) as photoelectrode and cobalt hydroxide (CoOOH) as a photoresist material. Initially, AMP was introduced into the paper-based reaction zone as a biogate aptamer, which specifically recognized the target and then left the ZrO 2 HS surface, releasing glutathione (GSH) encapsulated inside. Subsequently, the introduction of GSH into the reaction region and etching of CoOOH nanosheets to expose the PbS/CdS/LIG photosensitive material increased photocurrent. Under optimal conditions, the paper-based PEC biosensor showed a linear response to AMP in the range of 5.0 - 2 × 10 4 pM with a detection limit of 1.36 pM (S/N = 3). In addition, the constructed PEC sensing platform has excellent selectivity, high stability and favorable reproducibility, and can be used to assess AMP residue levels in various real water samples (milk, tap water, river water), indicating its promising application in environmental antibiotic detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The monitoring of foodborne bacterial contamination requires simple and convenient biosensors. This work describes a novel paper-based colorimetric biosensor for the rapid and sensitive bacteria detection. The biosensor was constructed via the encapsulation of D-alanyl-D-alanine capped gold nanoparticles (DADA-AuNPs) in a modified paper that was fabricated by the freeze-drying of TEMPO-oxidized cellulose nanofibers/cationic guar gum composite hydrogel-modified filter paper. The results indicated that the size of DADA-AuNPs largely determined the color of their aqueous system and they exhibited light red to dark red as their size increased from around 6 to 36 nm. All these different sized DADA-AuNPs turned into colorless when encountered with either S. aureus or E. coli. In particular, the smaller the DADA-AuNPs size, the faster the discoloration. The encapsulation of DADA-AuNPs into modified paper negligibly changed their responsiveness towards bacteria. In comparison to the original filter paper and oven-dried hydrogel-modified filter paper, the freeze-dried hydrogel-modified paper was demonstrated to be a better substrate for the encapsulation of DADA-AuNPs since they could be loaded with a larger amount of DADA-AuNPs in a faster way and showed a better perceivable color. This work demonstrated a promising paper-based colorimetric biosensor for the facile and rapid detection of bacteria., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

We report the development and initial validation of a paper-based nucleic acid testing platform that integrates Loop-mediated isothermal amplification (LAMP) with clustered regularly interspaced short palindromic repeats (CRISPR) technology, referred to as PLACID (Paper-based LAMP-CRISPR Integrated Diagnostics). LAMP eliminates the need for thermal cycling, resulting in simplified instrumentation, and the CRISPR-associated protein (Cas 12a) system eliminates false positive signals from LAMP products, resulting in highly selective and sensitive assays. We optimized the assay to perform both amplification and detection entirely on paper, eliminating the need for complex fluid handling steps and lateral flow assay transfers. Additionally, we engineered a smartphone-operated system that includes a low-powered, non-contact IR heating chamber to actuate paper-based LAMP and CRISPR reactions and enable the detection of fluorescent signals from the paper. The platform demonstrates high specificity and sensitivity in detecting nucleic acid targets with a limit of detection of 50 copies/μL. We integrate an equipment-free sample preparation separation technology designed to streamline the preparation of crude samples prior to nucleic acid testing. The practical utility of our platform is demonstrated by the successful detection of spiked SARS-CoV-2 RNA fragments in saliva, E. Coli in soil, and pathogenic E. Coli in clinically fecal samples of infected patients. Furthermore, we demonstrate that the paper-based LAMP CRISPR chips employed in our assays possess a shelf life of several weeks, establishing them as viable candidates for on-site diagnostics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The aging of paper seriously threatens the service life of cultural heritage documents. Bacterial cellulose (BC), which has a good fiber aspect ratio and is rich in hydroxyl groups, is suitable for strengthening aged paper. However, a single BC added was not ideal for paper restoration, since only strengthening was not able to resist the persistent acidification of ancient book. In this work, BC was functionalized by 3-aminopropyltriethoxysilane (APTES) to develop the interface bonding with aged paper. Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR) and elemental analysis identified the successful amino-silanization of BC. The modification parameters were optimized as the concentration of APTES of 5 wt%, the reaction time of 4 h, and the reaction temperature of 80 °C based on a considerable improvement in the strength properties without obvious appearance impact on reinforced papers. Moreover, the pH value of the repaired paper was achieved at 8.03, ensuring the stability of the anti-aging effect. The results confirmed that APTES-BC had great potential applications in ancient books conservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. All the authors listed have approved the manuscript enclosed., (Copyright © 2024. Published by Elsevier B.V.)

Developing portable and sensitive biosensors for bacteria detection is highly demanded due to their association with environmental and food safety. Paper-based microfluidic chip is the suitable candidate for constructing pump-free biosensor since paper is hydrophilic, low-cost and easy to use. However, the contradiction between sensitivity and small sample volume seriously affects the application of paper-based chip for bacteria detection. Here, a new microfluidic biosensor, combining large PDMS reservoir for sample storage, hydrophilic paper substrate for pump-free water transport, coated microspheres for bacteria capture and super absorbent resin for water absorption, is designed for the detection of bacteria in aqueous samples. Once the sample solution is introduced in the reservoir, water will automatically flow through the gaps between microspheres and the target bacteria will be captured by the aptamer coated on the surface. To facilitate PDMS reservoir bonding and ensure water transport, the upper side of paper substrate is coated with Polyethylenimine modified PDMS and the bottom side is kept unchanged. After all the solution is filtrated, fluorescent dye strained bacteria are enriched on the microspheres. The fluorescent intensity representing the number of bacteria captured is then measured using a portable instrument. Through the designed microfluidic biosensor, the bacteria detection can be achieved with 2 mL sample solution in less than 15 min for water or 20 min for diluted milk. A linear range from 10 CFU/mL to 1000 CFU/mL is obtained. The paper-based 3D biosensor has the merits of low-cost, simple operation, pump-free and high sensitivity and it can be applied to the simultaneous detection of multiple bacteria via integrating different aptamers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Total antioxidants play a crucial role in human health, and detection of the total antioxidant capacity (TAC) has broad application prospects in fields such as food safety, environmental assessment, and disease diagnosis. However, a long detection time, cumbersome steps, high cost, reliance on professional equipment, and nonportability still remain significant challenges. In this work, an efficient strategy of point-of-care testing (POCT) of the TAC in body fluids by nanozyme-catalyzed colorimetric paper-based microfluidic sensors is proposed. The paper-based microfluidic sensors coupled with a smartphone can reduce testing costs and provide portability. The nanozyme prepared by the solvothermal method presents Michaelis constants of 0.11 and 0.129 mM for H 2 O 2 and TMB, respectively. A method for immobilizing nanozymes and chromogenic agents on a paper-based microfluidic chip is established. Based on smartphone photography and image grayscale extraction, the TAC can be qualitatively detected with a detection limit and linear range of 33.4 and 50-700 μM, respectively. Furthermore, the proposed sensor can realize the one-step quantitative analysis of the TAC in body fluids (blood, saliva, and sweat) within 15 min. The proposed nanozyme-catalyzed colorimetric paper-based microfluidic sensors presented in this study exhibit promising application prospects in the fields of biochemical analysis and POCT.

Background: Okadaic acid (OA), as a diarrhetic shellfish poisoning, can increase the risk of acute carcinogenic or teratogenic effects for the ingestion of OA contaminated shellfish. At present, much effort has been made to graft immunoassay onto a paper substrate to make paper-based sensors for rapid and simple detection of shellfish toxin. However, the complicated washing steps and low protein fixation efficiency on the paper substrate need to be further addressed., Results: A novel paper-tip immunosensor for detecting OA was developed combined with smartphone and naked eye readout. The trapezoid paper tip was consisted of quantitative and qualitative detection zones. To improve the OA antigen immobilization efficiency on the paper substrate, graphene oxide (GO)-assisted protein immobilization method was introduced. Meanwhile, Au nanoparticles composite probe combined with the lateral flow washing was developed to simplify the washing step. The OA antigen-immobilized zone, as the detection zone Ⅰ, was used for quantitative assay by smartphone imaging. The paper-tip front, as the detection zone Ⅱ, which could qualitatively differentiate OA pollution level within 45 min using the naked eye. The competitive immunoassay on the paper tip exhibited a wide linear range for detecting OA (0.02-50 ng∙mL -1 ) with low detection limit of 0.02 ng∙mL -1 . The recovery of OA in spiked shellfish samples was in the range of 90.3 %-113.%., Significance: These results demonstrated that the proposed paper-tip immunosensor could provide a simple, low-cost and high-sensitivity test for OA detection without the need for additional large-scale equipment or expertise. We anticipate that this paper-tip immunosensor will be a flexible and versatile tool for on-site detecting the pollution of marine products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study presents a portable, low-cost, point-of-care (POC) system for the simultaneous detection of blood glucose and hematocrit. The system consists of a disposable origami microfluidic paper-based analytical device (μPAD) for plasma separation, filtration, and reaction functions and a 3D-printed cassette for hematocrit and blood glucose detection using a smartphone. The origami μPAD is patterned using a cost-effective label printing technique instead of the conventional wax printing method. The 3D-printed cassette incorporates an array of LED lights, which mitigates the effects of intensity variations in the ambient light and hence improves the accuracy of the blood glucose and hematocrit concentration measurements. The hematocrit concentration is determined quantitatively by measuring the distance of plasma wicking along the upper layer of the origami μPAD, which is pretreated with sodium chloride and Tween 20 to induce dehydration and aggregation of the red blood cells. The filtered plasma also penetrates to the lower layer of the origami μPAD, where it reacts with embedded colorimetric assay reagents to produce a yellowish-brown complex. A color image of the reaction complex is captured using a smartphone inserted into the 3D-printed cassette. The image is analyzed using self-written RGB software to quantify the blood glucose concentration. The calibration results indicate that the proposed detection platform provides an accurate assessment of the blood glucose level over the range of 45-630 mg/dL (R 2 = 0.9958). The practical feasibility of the proposed platform is demonstrated by measuring the blood glucose and hematocrit concentrations in 13 human whole blood samples. Taking the measurements obtained from commercial glucose and hematocrit meters as a benchmark, the proposed system has a differential of no more than 6.4% for blood glucose detection and 9.1% for hematocrit detection. Overall, the results confirm that the proposed μPAD is a promising solution for cost-effective and reliable POC health monitoring.

Hyperuricemia (HUA) has gradually become a public health burden as an independent risk factor for a variety of chronic diseases. Herein, a user-friendly point-of-care (POC) detection system (namely "Smart-HUA-Monitor") based on smartphone-assisted paper-based microfluidic is proposed for colorimetric quantification of HUA urinary markers, including uric acid (UA), creatinine (CR) and pH. The detection limits of UA and CR were 0.0178 and 0.5983 mM, respectively, and the sensitivity of pH were 0.1. The method was successfully validated in artificial urine samples and 100 clinical samples. Bland-Altman plots showed a high consistency between μPAD and the testing instruments (HITACHI 7600 Automatic Analyzer, URIT-500B Urine Analyzer and AU5800B automatic biochemical analyzer) in hospital. Smart-HUA-Monitor provides an accurate quantitative, rapid, low-cost and reliable tool for the monitoring and early diagnosis of HUA urine indicators., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cellulose-based packaging has received great attention due to its characteristics of biodegradability, sustainability, and recyclability. Natural polymer coatings are usually applied to the paper surface to enhance the barriers to water vapour and improve the mechanical properties. A chitosan-based coating for paper packaging was developed in this work to store specialty roasted coffee beans, evaluating two samples of chitosan (Sigma® and molasses chitosan), and following the physico-chemical and microbiological characteristics of coffee beans along a period of 60 days. Sensory tests (Ranking Descriptive Analysis and Preference Test) were applied to the beverage prepared with the roasted and ground coffee beans stored in each packaging. Thin chitosan films provided good coverage and adhesion on the paper. Improved mechanical properties and lower water permeability were observed in the chitosan-coated papers. The physicochemical and microbiological characteristics of the coffee beans were not influenced by the packaging along 60 days of storage. The molasses chitosan coating resulted in slightly darker roasted beans. In sensory evaluation, there is a clear difference between the chitosan samples, so that molasses chitosan-coated packaging had higher scores compared to Sigma® chitosan treatment for flavor and global impression in the preference analysis of the beverage. The molasses chitosan-coated packaging had three to four more consumers attributing the highest scores for the beverage prepared with the roasted beans stored in this type of packaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A paper electrochemical immunosensor for the combined binding and quantification of the heart failure (HF) biomarker Galectin-3 has been developed. The simple design of the new sensor is comprised of paper material that is decorated with gold nanostructures, to maximize its electroactive surface area, and functionalized with target-specific recognition molecules to selectively bind the protein from aqueous solutions. The binding of the protein caused the blockage of the electron flow to the sensor electroactive surface, thus causing its oxidation potential to shift and the corresponding current to reduce quantitatively with the increase in the protein concentration within the working range of 0.5ng/mL-8ng/mL (LOQ-0.5 ng/mL). This novel sensor was able to quantify Galectin-3 concentration in saliva samples from HF patients and healthy controls within 20 min with good reproducibility (RSD = 3.64%), without the need for complex sample processing steps. The electrochemical measurements of the patient samples were cross validated by ELISA where the percent agreement between the two methods was found to be 92.7% (RSD = 7.20%). Therefore, the new paper immunosensor sensor has a strong potential for rapid and cost-effective screening of the Galectin 3 biomarker at points of care, thus supporting the timely diagnosis of heart failure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Paper-based test film material is widely used in a variety of test instruments for different applications. The enzyme activity test paper sheet is one of the most popularly used test papers. Here we present a novel fabrication of paper-based enzyme activity test paper without cationic resin added in. The chemical pulping fibers were first beaten to different degrees (from 14.6 to 41.5°SR) with a PFI beater. After that, the fibers were modified with a cationic agent (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) under the system of alkali and water solution. Finally, the test papers were made with the modified fiber by a regular paper former in lab. The results showed that beating is beneficial for the improvement of the cationization reaction which is indicated by the Zeta potential, FTIR and EDS. The main mechanisms involved are the destruction of crystalline zone, increase of free hydroxyl group and defibrillation. This hypothesis was supported by the SEM, XRD and fiber analyzer. Beating under the optimized condition, the wet strength and liquid absorbability of test paper can meet the application requirement, and the test results of enzyme activity are quite close to those of commercial test papers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEI M -KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI 1800 -KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper., Competing Interests: Declaration of competing interest The authors declare that they have no known competing interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2023. Published by Elsevier Inc.)

Today, diabetes mellitus is one of the most common diseases that affects the population on a worldwide scale. Patients suffering from this disease are required to control their blood-glucose levels several times a day through invasive methods such as piercing their fingers. Our NaGdF 4 : 5% Er 3+ , 3% Nd 3+ nanoparticles demonstrate a remarkable ability to detect D-glucose levels by analysing alterations in their red-to-green ratio, since this sensitivity arises from the interaction between the nanoparticles and the OH groups present in the D-glucose molecules, resulting in discernible changes in the emission of the green and red bands. These luminescent sensors were implemented and tested on paper substrates, offering a portable, low-cost and enzyme-free solution for D-glucose detection in aqueous solutions with a limit of detection of 22 mg/dL. With this, our study contributes to the development of non-invasive D-glucose sensors, holding promising implications for managing diabetes and improving overall patient well-being with possible future applications in D-glucose sensing through tear fluid., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)