Search

This study investigated converting abundant paper mill waste, de‐inked paper sludge (DPS), into value‐added medium‐density fiberboard (MDF) panels. The objective was to repurpose this solid waste into a valuable material that aligns with the principles of a circular economy. Previous research has examined the addition of paper sludge to wood composites, but there is limited information on the specific incorporation of DPS into MDF production. This investigation offers new insights into this application. MDF panels were manufactured using hardwood fibers, with varying levels of urea‐formaldehyde resin (10% and 12% by weight) and different loadings of DPS (ranging from 0% to 50% by weight). X‐ray diffraction analysis revealed the presence of defective DPS fiber crystals. Contact angle measurements confirmed that DPS had poor wettability, corresponding to increased water absorption. As more DPS was incorporated, the mechanical properties of the panels progressively weakened due to defective fibers and poor adhesion between the fibers and the matrix. This was evident in scanning electron microscopy micrographs, which showed an escalation in interfacial flaws. Increasing the resin dosage noticeably improved the internal bond strength and reduced moisture uptake across all levels of DPS. However, at a DPS loading of 50%, the properties of the panels deteriorated by 36%–57% compared to the control MDF. Additionally, thickness swelling and water absorption increased significantly with higher DPS content, primarily due to the hydrophilic nature of the fibers. Based on optimization, it was determined that a DPS loading of 20% with a resin content of 12% provided the best balance between performance, waste utilization, cost, and moisture resistance. The reuse of abundant paper sludge supports the goals of a circular economy. However, strategies are required to tailor the processing methods and enable higher levels of recycled material without excessively compromising the key attributes of the product. Further research should focus on enhancing the quality of DPS and its compatibility with wood fibers and resin to enhance the performance of the composite material. Highlights: DPS from recycled paper mill assessed for MDF production with wood fibers and resinIncreasing DPS loading caused reductions in strength and adhesion of panelsWater absorption and thickness swelling markedly rose with more DPS additionIt was attributed to hydrophilic fibers and disrupted fiber‐matrix bondingOptimal formulation was 20% DPS loading and 12% resin content, balancing performance, waste utilization, and cost. [ABSTRACT FROM AUTHOR]

Objectives: Endoscopic ultrasound‐guided tissue acquisition (EUS‐TA) is used for pathological diagnosis and obtaining samples for molecular testing, facilitating the initiation of targeted therapies in patients with pancreatic cancer. However, samples obtained via EUS‐TA are often insufficient, requiring more efforts to improve sampling adequacy for molecular testing. Therefore, this study investigated the use of oil blotting paper for formalin fixation of samples obtained via EUS‐TA. Methods: This prospective study enrolled 42 patients who underwent EUS‐TA for pancreatic cancer between September 2020 and February 2022 at the Osaka International Cancer Institute. After a portion of each sample obtained via EUS‐TA was separated for routine histological evaluation, the residual samples were divided into filter paper and oil blotting paper groups for analysis. Accordingly, filter paper and oil blotting paper were used for the formalin fixation process. The total tissue, nuclear, and cytoplasm areas of each sample were quantitatively evaluated using virtual slides, and the specimen volume and histological diagnosis of each sample were evaluated by an expert pathologist. Results: All cases were cytologically diagnosed as adenocarcinoma. The area ratios of the total tissue, nuclear, and cytoplasmic portions were significantly larger in the oil blotting paper group than in the filter paper group. The frequency of cases with large amount of tumor cells was significantly higher in the oil blotting paper group (33.3%) than in the filter paper group (11.9%) (p = 0.035). Conclusions: Oil blotting paper can increase the sample volume obtained via EUS‐TA on glass slides and improve sampling adequacy for molecular testing. [ABSTRACT FROM AUTHOR]

Carbon paper is commonly used for catalytic electrode preparation because of its high conductivity, corrosion resistance, and stability. However, traditional electrode preparation methods are inappropriate for highly hydrophobic carbon paper. In this paper, a high‐activity carbon paper catalytic electrode was prepared using multistrategies cold plasma modification to create atomic structural defects, dope N and Cu elements, and introduce oxygen‐containing functional groups. Analyses show that the bombardment of high‐energy particles caused atomic structural defects. Nitrogen and copper entered the carbon paper through plasma‐induced chemical recombination and physical adsorption, reaching 5.26% and 3.83%, respectively. Ethanol‐based plasma introduced oxygen‐containing functional groups to improve hydrophilicity. Finally, the plasma‐prepared electrode exhibited a reduction efficiency of 87.69% in an electrocatalytic nitrate reduction reaction. [ABSTRACT FROM AUTHOR]

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial‐catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces‐based technologies for use in the textile and pulp‐milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment. [ABSTRACT FROM AUTHOR]

Aims: Information on breastfeeding and safety of biologics in infants is lacking due to difficulties in case collection. We evaluated methods for determining the concentration of biologics in breast milk using a dry filter method that can simplify the collection, storage and transport of breast milk. Methods: To generate dried filter paper (DFP) samples, approximately 30 μL of breast milk was placed onto a Whatman 903 card and punched out. After extraction, the supernatant was measured using an enzyme‐linked immunosorbent assay. Three concentrations of each drug were prepared in liquid breast milk (LBM) and DFP samples to determine their stability up to 28 days after storage at 2–8°C or −20°C for LBM and 25 ± 5°C for DFP. LBM and DFP samples were also provided by nursing mothers using biologics during lactation, and drug concentrations in both samples were compared. The agreement between the two measurement methods was confirmed by Bland–Altman analysis. Results: Breast milk was provided by 12 mothers who used biologics (tocilizumab, abatacept, etanercept, golimumab, sarilumab and belimumab). The coefficients of variation for within‐run and between‐run precision for the six drugs were within 15% for both LBM and DFP, and accuracy was within 90%–110% of the quality controls. After 28 days, concentrations remained at more than 90%. The difference between the values obtained by each method was within the acceptable range of error (−12.1 to +16.6 ng/mL). Conclusions: A method for determining the concentration of biologics using DFP is expected to help improve pharmacotherapy for lactating women. [ABSTRACT FROM AUTHOR]

Industrial waste locks are used as raw materials to reduce harmful effects on the environment and improve environmental performance. Marble clay powder can be used as a filling aid and can fill voids in concrete structures. This article will show you how to use a maximum natural sand alternative in concrete with marble powder and quarry dust. The challenge of the 21st century is to change to a new form that can support the natural system. This necessitates a radical rethinking of how to give the community infrastructure and housing. Making a concerted effort to develop novel, innovative, and alternative construction materials may be necessary. Jungles of concrete around cause's impact on the Environment and it would result in climate change. Mankind must avoid the use of things that are detrimental to the environment. So in this paper, it is decided to address the issue by adopting the use of the green concrete concept which is environmentally friendly. Green concrete is concrete made up using industrial wastes such as marble powder, quarry dust, wood ash, paper pulp, etc. Green concrete, which is capable of sustainable development, helps to reduce the consumption of natural resources, energy use, and environmental pollution. Green concrete is more cost‐effective than ordinary concrete and reduces the cost of resultant concrete by 14%–20%. It is also observed that the alkali‐aggregate reaction and sulfate attack resistance of concrete are both significantly improved. Green concrete is a useful tool for lowering environmental pollution and enhancing concrete's resistance to harsh conditions. All stages of infrastructure construction and rehabilitation will follow this trend of using new cement and techniques. Green concrete's adaptability and its performance derivatives will meet a variety of future needs. [ABSTRACT FROM AUTHOR]

Objective: To determine the accuracy of high‐risk human papillomavirus (HPV) DNA samples on filter paper in comparison to specimen transport medium (STM). Methods: This was a cross‐sectional diagnostic study of 42 consecutive women who were prospectively recruited. Each had self‐collected vaginal samples on filter paper, physician‐collected cervical samples on filter paper, and physician‐collected cervical samples in STM. HPV DNA testing was performed with a Hybrid Capture 2 system (Qiagen). Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and agreement of filter paper methods with the standard procedure were calculated. Results: The overall prevalence of HPV in STM was 67.5%. Detection of HPV DNA in the physician‐collected cervical samples on filter paper had a sensitivity of 77.8%, a specificity of 100%, a PPV of 100%, and an NPV of 68.4%. The patient's self‐sampling on filter paper had a sensitivity of 66.7%, a specificity of 100%, a PPV of 100%, and an NPV of 59.1%. The agreement between STM method and physician‐collected sample on filter paper was substantial, (κ = 0.695, P < 0.001), while the agreement between STM and self‐collected samples on filter paper was moderate (κ = 0.565, P < 0.001). Most patients reported that self‐collection was acceptable (100%), painless (95%), and not embarrassing (95%). Conclusion: Filter paper, with dried self‐collected vaginal samples, can be used to detect high‐risk HPV with acceptable accuracy. Synopsis: Self‐collected vaginal samples on filter paper, to detect high‐risk human papillomavirus, is better for women, easier to transport to central laboratories, and has acceptable accuracy. [ABSTRACT FROM AUTHOR]

This study attempts to detect papers originating from the Russia‐based paper mill 'International Publisher' LLC. A total of 1,063 offers to purchase co‐authorship on a fraudulent papers published from 2019 to mid‐2022 on the 123mi.ru website were analysed. This study identifies at least 451 papers that are potentially linked to the paper mill, including one preprint, a duplication paper and 16 republications of papers erroneously published in hijacked journals. Evidence of suspicious provenance from the paper mill is provided: matches in title, number of co‐authorship slots, year of publication, country of the journal, country of a co‐authors and similarities of abstracts. These problematic papers are co‐authored by scholars from at least 39 countries and are submitted to both predatory and reputable journals. This study also demonstrates collaboration anomalies in questionable papers and examines indicators of the Russia‐based paper mill. The value of co‐authorship slots offered by 'International Publisher' LLC from 2019 to 2021 is estimated at $6.5 million. Since this study only analysed a single paper mill, it is likely that the number of papers with forged authorship is much higher. [ABSTRACT FROM AUTHOR]

In recent years, paper‐based functional materials have received extensive attention in the field of energy storage due to their advantages of rich and adjustable porous network structure and good flexibility. As an important energy storage device, paper‐based supercapacitors have important application prospects in many fields and have also received extensive attention from researchers in recent years. At present, researchers have modified and regulated paper‐based materials by different means such as structural design and material composition to enhance their electrochemical storage capacity. The development of paper‐based supercapacitors provides an important direction for the development of green and sustainable energy. Therefore, it is of great significance to summarize the relevant work of paper‐based supercapacitors for their rapid development and application. In this review, the recent research progress of paper‐based supercapacitors based on cellulose was summarized in terms of various cellulose‐based composites, preparation skills, and electrochemical performance. Finally, some opinions on the problems in the development of this field and the future development trend were proposed. It is hoped that this review can provide valuable references and ideas for the rapid development of paper‐based energy storage devices. [ABSTRACT FROM AUTHOR]

Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost‐effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS‐based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non‐conductive sections are used as support to form free‐standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper‐based electrode has 202 S cm−1 and is capable of handling electric current up to 0.7 A, which can be used for high‐power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg−1, specific power of 4615 W kg−1 at 0.06 A g−1, and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper‐based composites for supercapacitors, wearable electronics, or sensors for smart packaging. [ABSTRACT FROM AUTHOR]

This paper analyses the conference papers published by double first‐class universities from mainland China between 2006 and 2019. The main findings are as follows: first, the number of conference papers from different double first‐class universities varied greatly, with the annual numbers of papers in the China Proceedings of Conferences Full‐text Database (CPCD) and in the Conference Proceedings Citation Index (CPCI) fluctuating during this period. Second, most of the top 10 disciplines of the papers in the CPCD and CPCI were in the natural sciences, with only two in the social sciences. The CPCD papers and CPCI papers had some overlap in their disciplinary distributions. Third, the CPCD and CPCI papers differed little in total number, with the number of CPCI papers being slightly higher than the number of CPCD papers. With the introduction of new regulations from the Ministry of Science and Technology (MST), there will likely be an increase in the number of Chinese‐language conference papers in the future. [ABSTRACT FROM AUTHOR]

Composites are pivotal in Europe's evolving packaging sector, which is undergoing changes due to circular and bioeconomy initiatives, which prioritize eco‐friendly packaging. Despite paper's high recycling rates, dynamic markets challenge recycling and circularity. Innovative paper‐based composites demand flexible recyclability assessments, which impacts product development. Recyclability methods are evolving as they struggle to match the dynamic changes occurring in the packaging sector. This article outlines paper recycling and compares global lab recyclability evaluation methods. [ABSTRACT FROM AUTHOR]

Direct air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC. [ABSTRACT FROM AUTHOR]

To compare the urine Congo‐red dot paper test (CRD) with dipstick urinalysis to screen preeclampsia (PE). A total of 409 paired spot urine samples were obtained prospectively from women with suspected pre‐eclampsia attending for routine hospital visits. Congo‐red dot paper test and dipstick urinalysis were examined and compared to screen pre‐eclampsia. The agreement between the two urinary test is modest (kappa coefficient = 0.28, 95% CI 0.14–0.42). The specificity of CRD was higher than urinalysis (97.4% vs. 90.4%, p <.001). Urinalysis performed better in sensitivity (77.3% vs. 40.9%, p =.04) and the area under the receiver operating characteristic curves (AUC) (0.84 [95% CI 0.74–0.94] vs. 0.69 [95% CI 0.55–0.83], p =.04) than CRD, respectively. The sensitivity, specificity, AUC of the parallel test of them is 86.4% (64.0%–96.4%), 89.1% (85.5%–92.0%), and 0.88 (95% CI 0.79–0.96). And the serial test is 31.8% (14.7%–54.9%), 98.7% (96.8%–99.5%), 0.65 (95% CI 0.51–0.79), accordingly. The urinalysis is a better diagnosing test for preeclampsia. CRD could aid in the diagnosis of patients with preeclampsia. Combined the two tests in suspected patients may further improve the performance in the diagnosis of preeclampsia. Further study need to be made for its potential clinical practice. [ABSTRACT FROM AUTHOR]

Carbon paper has been synthesized by paper making process followed by composite formation, and further chemically oxidized by immersing into a mixture of sulphuric acid and potassium dichromate to be used as an electrode for supercapacitor applications. XRD and Raman spectra were used to analyze the structure, and the defects in the samples respectively, in due course of oxidation. FESEM images revealed the morphology of oxidized samples to be rougher, which contributes towards increased active sites for reaction. The sample (COCP‐60) optimized via electrochemical studies, was further tested in various electrolytes to study the electrode/electrolyte interaction. It delivered a highest areal capacitance of 6.02 F/cm2 (231.5 F/g) in acidic electrolyte at a current density of 5 mA/cm2 (0.19 A/g). This findings were further corroborated by surface and diffusion contribution studies wherein it was found that diffusion is more profound with acidic electrolyte. The supercapacitor device fabricated with COCP‐60 electrode delivered an energy density of 0.41 Wh/cm2 at 2.83 W/cm2 power density with coulombic efficiency of 98 %, and cyclic stability of ∼90 % for over 5000 cycles. [ABSTRACT FROM AUTHOR]

The acidic soils of western Newfoundland require liming for successful production of most crops. Locally sourced paper mill waste wood ash (WA) and paper sludge (SL) have potential as cheaper alternatives to limestone (LIME). Two greenhouse experiments evaluated WA and SL as liming and soil conditioning amendments for annual ryegrass (Lolium multiflorum) production. At 55 days after seeding, soil pH in WA (6.2 and 6.3) and wood ash and paper sludge (WASL) (6.0 and 6.3) were not different from that in LIME (6.0 and 6.5) for Experiments 1 and 2, respectively. However, pH in SL was 0.4 and 0.3 points lower than in LIME. Compared to LIME, WA, SL, and WASL produced 31%–52% and 57%–74% greater biomass yield in Experiments 1 and 2, respectively. N uptake was greater in WA (60 and 129 kg N ha−1) and WASL (51 and 97 kg N ha−1) compared to LIME (40 and 85 kg N ha−1), in Experiments 1 and 2, respectively. SL did not differ from LIME in Experiment 1, but reduced N uptake by 57% in Experiment 2. The results show significant potential of WA as an alternative amendment for liming and yield improvement of annual ryegrass grown in NL podzolic soils. However, SL has limited potential due to the risk of increasing N immobilization and residual soil mineral N when growing conditions are limiting. Combining SL with WA or biochar seemed to alleviate these risks. Overall, the adoption of these amendments for field production systems warrants serious consideration, following supplemental field studies to determine optimal application rates and timing. Core Ideas: The podzolic soils of Newfoundland have low pH and fertility, hence require liming.Locally sourced wastes, such as paper mill wood ash (WA) and sludge (SL), could be used as liming and nutrient sources.WA was equivalent to limestone (LIME) in improving and sustaining optimal soil pH.WA produced 52% and 74% greater annual ryegrass yield than conventional LIME application in podzolic soils. [ABSTRACT FROM AUTHOR]

Background: Computerised neuropsychological assessments (CNAs) are proposed as more accessible and culturally appropriate alternatives to traditional pencil‐and‐paper neuropsychological assessments (PnPAs) for diagnosing dementia in diverse populations. Whilst some PnPAs have demonstrated cultural and linguistic bias, research investigating the suitability of CNAs for culturally and linguistically diverse (CALD) individuals is limited, especially outside of the United States. Method: This study compared cognitive performance in a heterogenous sample of older Australian CALD English‐speakers and an L1 English‐speaking background (ESB) sample. Cross‐sectional data were drawn from the ongoing CogSCAN Study. Participants were 212 community‐dwelling individuals aged 60‐95 years without a dementia diagnosis (159 ESB/53 CALD). Participants completed a PnPA and/or CNAs, sessions were counterbalanced accordingly. CNA sessions involved two of four commercially‐available CNAs in a randomised order. Differences in the level and pattern of cognitive performance between groups on two CNAs (CANTAB/Cogstate) and a comprehensive PnPA in English, controlling for sociodemographic and health factors, are reported here. Selection of key variables for examination were based on previous findings (PnPA) and test developer recommendations (CNAs). Result: Sample characteristics are summarised in Table 1. CALD participants' cognitive performance on individual tests (Figure 1) was largely comparable to ESB participants on PnPA and each CNA. Significant differences between groups, after Bonferroni correction for multiple comparisons, were observed for the Boston Naming Test (PnPA; a language test widely criticised for use with CALD populations due to culturally biased stimuli) and Rapid Visual Information Processing (CANTAB; a test of attention/processing speed). Among participants who completed PnPA and Cogstate, a significant interaction between group and assessment type on global cognitive performance was observed; ESB participants outperformed CALD participants on PnPA, but not on Cogstate (Figure 2). No significant main effects or interaction were observed in PnPA versus CANTAB. Conclusion: These results showed fewer and smaller discrepancies across groups and assessment types than has been found in previous literature with other CALD samples, perhaps reflecting higher levels of English proficiency, acculturation, and education in English than previous cohorts. Work in progress is investigating the influence of linguistic and acculturation factors on cognitive performance in a larger and more diverse sample. [ABSTRACT FROM AUTHOR]

Electronic paper (e‐paper) is a reflective display technology with unique advantages, such as bistability, low‐power consumption, and high ambient contrast ratio. These features make e‐paper a promising candidate for future Internet of Things applications. Among different technologies of e‐paper, electrophoretic display (EPD) is the most successful one for commercialization. However, the edge ghosting (also known as the fringing effect) still limits the performance of EPD. Herein, we established a model of particle dynamics of electrophoresis, simulated the edge ghosting of microcapsule EPD, analyzed the edge ghosting effect, and revealed the relationship between thicknesses, dielectric constants of the back binder layer, and the edge ghosting. Two EPD panels with different thicknesses of back binder layer were demonstrated, which verifies the accuracy of this simulation model. With the proposed model, many device mechanisms and product issues can be analyzed and illustrated, which is supposed to guide the researchers in optimizing the device structure design of EPD. [ABSTRACT FROM AUTHOR]

Background: Regulatory aspects of transfusion medicine add complexity in blinded transfusion trials when considering various electronic record keeping software and blood administration processes. The aim of this study is to explore strategies when blinding transfusion components and products in paper and electronic medical records. Methods: Surveys were collected and interviews were conducted for 18 sites across various jurisdictions in North America to determine solutions applied in previous transfusion randomized control trials. Results: Sixteen responses were collected of which 11 had previously participated in a transfusion randomized control trial. Various solutions were reported which were specific to the laboratory information system (LIS) and electronic medical record (EMR) combinations although solutions could be grouped into four categories which included the creation of a study product code in the LIS, preventing the transmission of data from the LIS to the EMR, utilizing specialized stickers and labels to conceal product containers and documents in the paper records, and modified bedside procedures and documentation. Discussion: LIS and EMR combinations varied across sites, so it was not possible to determine combination‐specific solutions. The study was able to highlight solutions that may be emphasized in future iterations of LIS and EMR software as well as procedural changes that may minimize the risk of unblinding. [ABSTRACT FROM AUTHOR]

The electronic paper (E‐paper) has the advantages of low power consumption, flexibility, small form factor, and eye‐friendliness. However, most E‐paper substrates are made by indium tin oxide (ITO) glasses or plastic substrates, which are hard to degrade in the natural environment. Our previous work introduced a self‐powered E‐paper (SPEP) integrated with triboelectric nanogenerator (TENG). Here, a paper‐based SPEP was further demonstrated, driven by a TENG module without any other power module. By combining the self‐powered driving mode and paper substrates, this work showed novel possibilities for E‐paper devices, which provided great potential in future Internet of things (IoT) displays. [ABSTRACT FROM AUTHOR]

We developed a simple, paper‐based device that enables sensitive detection by mass spectrometry (MS) without solid phase extraction or other sample preparation. Using glass fiber filter papers within a 3D printed holder, the device employs electrokinetic manipulations to stack, separate, and desalt charged molecules on paper prior to spray into the MS. Due to counter‐balanced electroosmotic flow and electrophoresis, charged analytes stack on the paper and desalting occurs in minutes. One end of the paper strip was cut into a sharp point and positioned near the inlet of a MS. The stacked analyte bands move toward the paper tip with the EOF where they are ionized by paper spray. The device was applied to analysis of PFAS in tap water with sub part‐per‐trillion detection limits in less than ten minutes with no sample pretreatment. Analysis of opioids in urine also occurs in minutes. The crucial parameters to enable stacking, separation, and MS ionization of both positively and negatively charged analytes were determined and optimized. Experimental and computational modeling studies confirm the electrokinetic stacking and analyte transport mechanisms. On‐paper separations were carried out by stacking analyte bands at different locations depending on their electrophoretic mobility, achieving baseline separation in some cases. [ABSTRACT FROM AUTHOR]

The erratic, intermittent, and unpredictable nature of sweat production, resulting from physiological or psychological fluctuations, poses intricacies to consistently and accurately sample and evaluate sweat biomarkers. Skin‐interfaced microfluidic devices that rely on colorimetric mechanisms for semi‐quantitative detection are particularly susceptible to these inaccuracies due to variations in sweat secretion rate or instantaneous volume. This work introduces a skin‐interfaced colorimetric bifluidic sweat device with two synchronous channels to quantify sweat rate and biomarkers in real‐time, even during uncertain sweat activities. In the proposed bifluidic‐distance metric approach, with one channel to measure sweat rate and quantify collected sweat volume, the other channel can provide an accurate analysis of the biomarkers based on the collected sweat volume. The closed channel design also reduces evaporation and resists contamination from the external environment. The feasibility of the device is highlighted in a proof‐of‐the‐concept demonstration to analyze sweat chloride for evaluating hydration status and sweat glucose for assessing glucose levels. The low‐cost yet highly accurate device provides opportunities for clinical sweat analysis and disease screening in remote and low‐resource settings. The developed device platform can be facilely adapted for the other biomarkers when corresponding colorimetric reagents are exploited. [ABSTRACT FROM AUTHOR]

Three‐dimensional paper‐based microfluidic devices have shown great potential in various applications, including point‐of‐care diagnostics, environmental monitoring, and tissue engineering. However, their fabrication is still limited to stacking and origami methods. Inspired by the art of bamboo braiding in China, we developed a novel fabrication technique based on the braiding concept to create three‐dimensional paper‐based microfluidic devices with PDMS‐impregnated paper substrate as the building units. The resulting three‐dimensional paper device brings unique advantages, including compactness, facile disassembly, and real‐time flow visualization. The multiplexed glucose analysis with a braided device integrated with 16‐switchable valves for flow control was further fabricated to demonstrate the device's applicability. We envision braiding‐based fabrication technology opening new possibilities and bringing broad applications for three‐dimensional paper microfluidic devices. [ABSTRACT FROM AUTHOR]

In rhinitis and asthma, several mHealth apps have been developed but only a few have been validated. However, these apps have a high potential for improving person-centred care (PCC), especially in allergen immunotherapy (AIT). They can provide support in AIT initiation by selecting the appropriate patient and allergen shared decision-making. They can also help in (i) the evaluation of (early) efficacy, (ii) early and late stopping rules and (iii) the evaluation of (carried-over) efficacy after cessation of the treatment course. Future perspectives have been formulated in the first report of a joint task force (TF)-Allergic Rhinitis and Its Impact on Asthma (ARIA) and the European Academy of Allergy and Clinical Immunology (EAACI)-on digital biomarkers. The TF on AIT now aims to (i) outline the potential of the clinical applications of mHealth solutions, (ii) express their current limitations, (iii) make proposals regarding further developments for both clinical practice and scientific purpose and (iv) suggest which of the tools might best comply with the purpose of digitally-enabled PCC in AIT., (© 2024 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

The accumulation of senescent cells drives inflammaging and increases morbidity of chronic inflammatory lung diseases. Immune responses are built upon dynamic changes in cell metabolism that supply energy and substrates for cell proliferation, differentiation, and activation. Metabolic changes imposed by environmental stress and inflammation on immune cells and tissue microenvironment are thus chiefly involved in the pathophysiology of allergic and other immune-driven diseases. Altered cell metabolism is also a hallmark of cell senescence, a condition characterized by loss of proliferative activity in cells that remain metabolically active. Accelerated senescence can be triggered by acute or chronic stress and inflammatory responses. In contrast, replicative senescence occurs as part of the physiological aging process and has protective roles in cancer surveillance and wound healing. Importantly, cell senescence can also change or hamper response to diverse therapeutic treatments. Understanding the metabolic pathways of senescence in immune and structural cells is therefore critical to detect, prevent, or revert detrimental aspects of senescence-related immunopathology, by developing specific diagnostics and targeted therapies. In this paper, we review the main changes and metabolic alterations occurring in senescent immune cells (macrophages, B cells, T cells). Subsequently, we present the metabolic footprints described in translational studies in patients with chronic asthma and chronic obstructive pulmonary disease (COPD), and review the ongoing preclinical studies and clinical trials of therapeutic approaches aiming at targeting metabolic pathways to antagonize pathological senescence. Because this is a recently emerging field in allergy and clinical immunology, a better understanding of the metabolic profile of the complex landscape of cell senescence is needed. The progress achieved so far is already providing opportunities for new therapies, as well as for strategies aimed at disease prevention and supporting healthy aging., (© 2023 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

Efficacious, effective and efficient communication between healthcare professionals (HCP) and patients is essential to achieve a successful therapeutic alliance. Telemedicine (TM) has been used for decades but during the COVID-19 pandemic its use has become widespread. This position paper aims to describe the terminology and most important forms of TM among HCP and patients and review the existing studies on the uses of TM for asthma and allergy. Besides, the advantages and risks of TM are discussed, concluding that TM application reduces costs and time for both, HCP and patients, but cannot completely replace face-to-face visits for physical examinations and certain tests that are critical in asthma and allergy. From an ethical point of view, it is important to identify those involved in the TM process, ensure confidentiality and use communication channels that fully guarantee the security of the information. Unmet needs and directions for the future regarding implementation, data protection, privacy regulations, methodology and efficacy are described., (© 2023 European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

In drug hypersensitivity, drug provocation testing (DPT), also called drug challenge, is the gold standard for investigation. In recent years, risk stratification has become an important tool for adjusting the diagnostic strategy to the perceived risk, whilst still maintaining a high level of safety for the patient. Skin tests are recommended before DPT but may be omitted in low-risk patients. The task force suggests a strict definition of such low-risk patients in children and adults. Based on experience and evidence from studies of allergy to beta-lactam antibiotics, an algorithm on how to adjust DPT to the risk, and when to omit skin tests before DPT, is presented. For other antibiotics, non-steroidal anti-inflammatory drugs and other drugs, skin tests are poorly validated and DPT is frequently necessary. We recommend performing DPT with chemotherapeutics and biologicals to avoid unnecessary desensitization procedures and DPT with skin tests negative contrast media. We suggest DPT with anesthetics only in highly specialized centers. Specifics of DPT to proton pump inhibitors, anticonvulsants and corticosteroids are discussed. This position paper provides general recommendations and guidance on optimizing use of DPT, whilst balancing benefits with patient safety and optimizing the use of the limited available resources., (© 2023 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

Diagnosing immediate drug hypersensitivity reactions (IDHRs) can pose a significant challenge and there is an urgent need for safe and reliable tests. Evidence has emerged that the basophil activation test (BAT), an in vitro assay that mirrors the in vivo response, can be a complementary test for many drugs. In this position paper, members of Task Force (TF) "Basophil activation test in the evaluation of Drug Hypersensitivity Reactions" from the European Academy of Allergy and Clinical Immunology (EAACI) present the data from a survey about the use and utility of BAT in IDHRs in Europe. The survey results indicate that there is a great interest for using BAT especially for diagnosing IDHRs. However, there are still main needs, mainly in the standardization of the protocols. Subsequently consensus-based recommendations were formulated for: (i) Technical aspects of BAT in IDHRs including type of sample, management of drugs, flow cytometry protocols, interpretation of the results; and (ii) Drug-specific aspects that should be taken into account when performing BAT in relation to betalactams, neuromuscular blocking agents, fluoroquinolones, chlorhexidine, opioids, radio contrast media, chemotherapeutics, biological agents, nonsteroidal anti-inflammatory drugs, COVID vaccine, and excipients. Moreover, aspects in the evaluation of pediatric population have also been considered. All this indicates that BAT offers the clinician and laboratory a complementary tool for a safe diagnostic for IDHRs, although its place in the diagnostic algorithm depends on the drug class and patient population (phenotype, geography, and age). The standardization of BAT is important for generalizing this method beyond the individual laboratory., (© 2023 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

Paper‐based materials are widely used in various fields due to their advantages, such as environmental friendliness and sustainability. However, the highly hydrophilic nature of the cellulose that makes up paper‐based materials limits their use. In this paper, micron/nano‐graphite/polydimethylsiloxane (PDMS) coatings with excellent superhydrophobic and conductive properties were prepared on the surface of filter paper by a simple spraying method. A mixture of micro‐graphite and nano‐graphite was used to form a multistage rough structure on the surface of the filter paper by spraying, and the low surface energy PDMS enhanced the adhesion of the micro‐graphite and nano‐graphite on the surface of the filter paper. The results showed that the samples possessed the best superhydrophobic properties when the ratio of micro‐graphite to nano‐graphite was 1:1, at which time the contact and rolling angles of the samples were 165.4° and 3.2°, respectively. The prepared superhydrophobic samples have good bounce and self‐cleaning properties, while the samples have good mechanical stability and chemical resistance. Additionally, due to the conductivity of micro–nano‐graphite, both particle sizes closely contact the sample surface, creating a conductive network. With a 1:1 ratio of micro‐ and nano‐graphite, the coating exhibits minimal resistance at 1.89 KΩ, and the sample maintains stable conductivity even underwater. The above properties greatly extend the application range of paper‐based superhydrophobic materials. [ABSTRACT FROM AUTHOR]

Key points: Academia is already witnessing the abuse of authorship in papers with text generated by large language models (LLMs) such as ChatGPT.LLM‐generated text is testing the limits of publishing ethics as we traditionally know it.We alert the community to imminent risks of LLM technologies, like ChatGPT, for amplifying the predatory publishing 'industry'.The abuse of ChatGPT for the paper mill industry cannot be over‐emphasized.Detection of LLM‐generated text is the responsibility of editors and journals/publishers. [ABSTRACT FROM AUTHOR]

Photoreversible color‐switching materials, which can reversibly change color in response to external light stimuli, have attracted increasing attention for their applications in time‐sensitive information storage and optical data storage fields. But most of the related materials are dyes or redox compounds with ultraviolet as the light source, dramatically limiting the cycling stability during discoloration processes. To address this problem, a near‐infrared (NIR)‐responsive rewritable paper via doping layered Co‐metal–organic frameworks (MOFs) into the stable polyvinylidene fluoride matrix is reported for the first time. Layered Co‐MOF shows a rapid color‐switching characteristic between orange and black blue upon NIR illumination on/off because of the interlayer spacing changes. Benefiting from the soft network structures of the matrix, Co‐MOF can be homogeneously distributed to deliver an outstanding reversibility performance, including rapid response, coloration in a short period, and decoloration within about 3 min in ambient air. The fabrication of new photoreversible color switching system holds great potential in communication security, which offers a viable pathway to achieve ink‐free photoreversible printing. [ABSTRACT FROM AUTHOR]

A special‐purpose Committee on DNA Sequences as Types was established at the XIX International Botanical Congress (IBC) in Shenzhen, China, in 2017, with a mandate to report to the XX IBC in Madrid in 2024 with recommendations on a preferred course of action with respect to potential amendments of the International Code of Nomenclature for algae, fungi, and plants to allow DNA sequences as types. This is the first in an expected series of papers from the Special‐purpose Committee on this issue. We set out the background to the establishment of the Committee, explore key issues around typification that are pertinent to the question of DNA sequences as types, enumerate pros and cons of allowing DNA sequences as types, and foreshadow options for future discussion and potential recommendations. [ABSTRACT FROM AUTHOR]

Information coding, recording, encryption, and decryption are of great importance in the field of anti‐counterfeiting, especially in the current AI information era. Herein, a paper‐like hydrogel composed of solely H‐bonded poly(vinyl alcohol) (PVA) and poly(n‐vinylcaprolactam) (PNVCL), namely VAPN, is developed for multiple ways of encryption and decryption based on chemical‐induced phase separation. It not only exhibits excellent ability of ink absorption and retention by the noncovalent H‐bonds and n−π* interactions and good mechanical strength but also maintains a negligible volume change during the phase separation that is crucial for the information fidelity. Given that the noncovalent interactions are the driving force to trigger the phase separation in the hydrogel, available chemical inks are numerous ranging from small molecules to polymers. Furthermore, together with thermally induced phase separation, the different dynamic processes of the association and dissociation between ink molecules and the hydrogel endow the latter with reversible information recording and self‐erasing, temporary or permanent, and customized encryption and decryption. [ABSTRACT FROM AUTHOR]

Paper‐based cultural relics are of great value and have been facing irreversible damage caused by multiple factors, among which acid hydrolysis and ultraviolet photodegradation are the main processes leading to paper deterioration. Paper protection highly relies on a limited range of materials with single functions, and the design of new materials that ensure long‐term safety and efficiency by simultaneously addressing the issues of acidification and UV degradation in paper is highly desired. In this study, the introduction of carbon dots (CDs)‐enhanced layered double hydroxides (LDH) 0D/2D nanohybrids (CDs/Mg‐Al LDH)  is proposed as novel dual‐functional materials for paper protection against UV degradation and acidification. Through a CDs‐assisted in situ growth strategy, CDs/Mg‐Al LDH with ultrathin thickness (≈9.1 nm) and CDs‐intercalated structure are achieved. The CDs/Mg‐Al LDH nanohybrids demonstrate high dispersibility, strong UV absorption, and remarkable photostability, resulting in protected‐paper with decelerated acidification, oxidation, and yellowing degradation processes under both accelerated UV‐aging and dry‐heat conditions. Additionally, the protected‐paper can emit uniform blue light under 365 nm UV excitation allows for easy identification of the distributed CDs/Mg‐Al LDH within the paper, marking a unique and practical feature. This research paces a new direction for the protection of paper‐based relics with emerging carbon dots‐based 0D/2D nanomaterials. [ABSTRACT FROM AUTHOR]

Personalized healthcare management is an emerging field that requires the development of environment‐friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper‐based biosensors (IFP−Multi) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT–bioelectronic interface, these biosensors offer ultrahigh areal‐specific capacitance (74633 mF cm−2), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP−Multi devices have the potential to simulate deaf‐mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP−Multi devices demonstrate self‐powered handwriting sensing and moisture power generation for sweat‐sensing applications. As a proof‐of‐concept, a GPT 3.5 model‐based fine‐tuning and prediction pipeline that utilizes recorded physiological signals through IFP−Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper‐based electrochemical multimodal devices, paving the way for a new era of healthcare advancements. [ABSTRACT FROM AUTHOR]

Owing to their high porosity and tunability, porous solids such as metal–organic frameworks (MOFs), zeolites, or activated carbons (ACs) are of great interest in the fields of air purification, gas separation, and catalysis, among others. Nonetheless, these materials are usually synthetized as powders and need to be shaped in a more practical way that does not modify their intrinsic property (i.e., porosity). Elaborating porous, freestanding and flexible sheets is a relevant shaping strategy. However, when high loadings (>70 wt.%) are achieved the mechanical properties are challenged. A new straightforward and green method involving the combination softwood bleached kraft pulp fibers (S) and nano‐fibrillated cellulose (NFC) is reported, where S provides flexibility while NFC acts as a micro‐structuring and mechanical reinforcement agent to form high loadings porous solids paper sheets (>70 wt.%). The composite has unobstructed porosity and good mechanical strength. The sheets prepared with various fillers (MOFs, ACs, and zeolites) can be rolled, handled, and adapted to different uses, such as air purification. As an example of potential application, a MOF paper composite has been considered for the capture of polar volatile organic compounds exhibiting better performance than beads and granules. [ABSTRACT FROM AUTHOR]

Functional paper‐based microdevices have been receiving wide attention in the research areas of microfluidic chips, soft actuators, etc. This work introduces the design and fabrication of a Janus‐type paper in which one side of the paper remains hydrophilic and the other side is hydrophobic. Such Janus‐type paper is prepared by directly spraying hydrophobic Glaco solutions and following air plasma treatment. The former treatment can cover the paper fibers with numerous hydrophobic SiO2 nanoparticles. Through optimizing the fabrication parameters of the air plasma, it can penetrate the filter paper in a controllable depth, resulting in effectively regulating the hydrophobic particles into hydrophilic ones. Thereafter, the antirotation and interfacial stability of the Janus paper are investigated. Finally, a liquid storage and contamination‐free analysis devices are demonstrated on the Janus‐type paper platform. Noting that the commercially nonfluoride coating (Glaco) and mature plasma instrument together make the fabrication method simple, rapid, users/environmental‐friendly, and mass‐produced. The method provides a new route to fabricate Janus‐type paper for potential multifunctional applications in microfluidic chips and smart actuators, and may open up new avenue to prepare Janus films in a simple/rapid way. [ABSTRACT FROM AUTHOR]

Lithium is perceived as an ideal anode for next generation batteries with high‐energy density. However, the critical issue of the intractable growth of Li dendrites, which leads to a poor cycling life, still remains. Herein, a hierarchical surface is designed and constructed on carbon fiber (CF) using binders in fabricated CF paper (CFP). The lightweight CF with high mechanical properties is facilitated to establish a 3D network structure as an alternative to Cu foil. The binders are transformed into oxygen‐containing amorphous carbon and sodium carbonate (Na2CO3) using a low‐temperature carbonization process, leading to uniform Li nucleation and a stable solid electrolyte interphase layer with inorganic components. In the electrochemical test, the CFP with amorphous carbon and Na2CO3 (ANCFP) shows a low Li nucleation overpotential and smooth dendrite‐free Li plating. Furthermore, the ANCFP electrode exhibits good cycling stability in half and symmetrical cells. A full‐cell assembled using a LiFePO4 cathode with high loading (≈13 mg cm−2) achieves a high‐energy density of 428 Wh kg−1 (at 0.1 C) and an excellent capacity retention of 85% at 1 C after 300 cycles. This strategy is expected to help realize highly stable Li metal anodes for practical application by suppressing Li dendrite growth. [ABSTRACT FROM AUTHOR]

Microfluidic based sensors are one of the emerging alternatives for bringing solutions studies on paper platforms. Microfluidic paper assisted platform was developed over here through a simple, easy, cost effective and instrument free process. The self‐same method of waxing through crayoning, was estimated thoroughly on different paper platforms. Varied parameter including type of crayoning, way of patterning, color effect, wicking rate and channel optimization was performed on paper milieus. Optimized time of baking for obtaining controlled penetration ranges from 2 min to 8 min depending on the type of paper used. Wax crayoning was preferred over oil pasteling for making hydrophobic barriers uniformly, solid as well fully penetrated within paper inner layers. Fabrication through this easy cost‐effective route allows a formation of hydrophilic reaction or sensing zone of 0.25 cm2 with sufficient reactive area. Further sensing of dopamine on paper platform was carried using paper chip adsorbed with fluorescent modified graphene quantum dots as sensing material. The patterned paper showed advantage as only few microliter (5 μl to 10 μl) range of sample volume was required for testing. Fluorescence quenching with increase of concentration was witnessed where around 25–75 μM dopamine concentration was positively tested through naked eye; which for the first time was demonstrated here via robust wax crayoning method for developing paper based biosensor. [ABSTRACT FROM AUTHOR]

Chronic pruritus (CP) is frequent in general medicine and the most common complaint in general dermatology. The prevalence of CP is expected to rise in the future due to the ageing population. The clinical presentation, underlying aetiology and treatment strategy of CP are heterogeneous. Also, individual treatment aims and physical, psychic and economic burdens of patients might vary. Chronic prurigo (CPG) is the most severe disease in the chronic pruritus spectrum, being associated with long-standing scratch-induced skin lesions and a therapy refractory itch-scratch-cycle. It is thus important to raise disease awareness for CP and CPG in the general public and among decision-makers in the health system. Further, there is a need to support a rational clinical framework to optimize both diagnostics and therapeutics. Currently, there is still a shortcoming regarding approved therapies and understanding CP/CPG as severe medical conditions. Therefore, the EADV Task Force Pruritus decided to publish this white paper based on several consensus meetings. The group consented on the following goals: (a) ensure that CP is recognized as a serious condition, (b) increase public awareness and understanding of CP and CPG as chronic and burdensome diseases that can greatly affect a person's quality of life, (c) clarify that in most cases CP and CPG are non-communicable and not caused by a psychiatric disease, (d) improve the support and treatment given to patients with CP to help them manage their disease and (e) publicize existing therapies including current guidelines. We aim to point to necessary improvements in access and quality of care directed to decision-makers in health policy, among payers and administrations as well as in practical care., (© 2024 The Authors. Journal of the European Academy of Dermatology and Venereology published by John Wiley & Sons Ltd on behalf of European Academy of Dermatology and Venereology.)

Proton pump inhibitors (PPIs) are invaluable therapeutic options in a variety of dyspeptic diseases. In addition to their well-known risk profile, PPI consumption is related to food and environmental allergies, dysbiosis, osteoporosis, as well as immediate and delayed hypersensitivity reactions (HSRs). The latter, although a rare event, around 1%-3%, due to the extraordinarily high rate of prescription and consumption of PPIs are related to a substantial risk. In this Position Paper, we provide clinicians with practical evidence-based recommendations for the diagnosis and management of HSRs to PPIs. Furthermore, the unmet needs proposed in the document aim to stimulate more in-depth investigations in the topic., (© 2023 The Authors. Allergy published by European Academy of Allergy and Clinical Immunology and John Wiley & Sons Ltd.)

Paper, an inexpensive material with natural biocompatibility, non‐toxicity, and biodegradability, allows for affordable and cost‐effective substrates for unconventional advanced electronics, often called papertronics. On the other hand, polymeric elastomers have shown to be an excellent success for substrates of soft bioelectronics, providing stretchability in skin wearable technology for continuous sensing applications. Although both materials hold their unique advantageous characteristics, merging both material properties into a single electronic substrate reimagines paper‐based bioelectronics for wearable and patchable applications in biosensing, energy generation and storage, soft actuators, and more. Here, a breathable, light‐weighted, biocompatible engineered stretchable paper is reported via coaxial nonwoven microfibers for unconventional bioelectronic substrates. The stretchable papers allow intimate bioconformability without adhesive through coaxial electrospinning of a cellulose acetate polymer (sheath) and a silicone elastomer (core). The fabricated cellulose‐silicone fibers exhibit a greater percent strain than commercially available paper while retaining hydrophilicity, biocompatibility, combustibility, disposable, and other natural characteristics of paper. Moreover, the nonwoven stretchable cellulose‐silicone fibrous mat can adapt conventional printing and fabrication process for paper‐based electronics, an essential aspect of advanced bioelectronic manufacturing. [ABSTRACT FROM AUTHOR]

The purpose of this study is to investigate whether there are differences in handwritten Chinese signatures on different media including paper and electronic devices. Participants were asked to sign specified names on various types of media and the signatures were scanned or saved digitally for subsequent analysis. In this study, using convolutional neural networks and Siamese neural networks as classifiers and comparators, the performance plunge is revealed and thus considerable dissimilarity between the signatures on different media is implied. To further explore this, cubic Bézier curves are fitted to the signatures using the least square method for quantitative statistical analysis. By analyzing the visual changes in the morphology of strokes, several features of signatures are selected and computed, and the paired t‐test and the Wilcoxon signed‐rank test are implemented, which provides a deeper substantiation and explanation of the findings. [ABSTRACT FROM AUTHOR]

Since the introduction of OpenAI's ChatGPT‐3 in late 2022, conversational chatbots have gained significant popularity. These chatbots are designed to offer a user‐friendly interface for individuals to engage with technology using natural language in their daily interactions. However, these interactions raise user privacy concerns due to the data shared and the potential for misuse in these conversational information exchanges. Furthermore, there are no overarching laws and regulations governing such conversational interfaces in the United States. Thus, there is a need to investigate the user privacy concerns. To understand these concerns in the existing literature, this paper presents a literature review and analysis of 38 papers out of 894 retrieved papers that focus on user privacy concerns arising from interactions with text‐based conversational chatbots through the lens of social informatics. The review indicates that the primary user privacy concern that has consistently been addressed is self‐disclosure. This review contributes to the broader understanding of privacy concerns regarding chatbots the need for further exploration in this domain. As these chatbots continue to evolve, this paper acts as a foundation for future research endeavors and informs potential regulatory frameworks to safeguard user privacy in an increasingly digitized world. [ABSTRACT FROM AUTHOR]

This document provides abstracts of papers presented at the Society of Dairy Technology 80th Anniversary Conference, covering a range of topics in the dairy industry. One paper examines the impact of process conditions on water evaporation and energy usage in spray drying, while another explores the use of near-infrared spectroscopy to analyze the composition of raw milk. Other papers discuss the development of high-protein soft cheese alternatives, plant-based cheese analogues, and sustainable cleaning strategies in dairy facilities. The document also mentions a project focused on characterizing the milk metabolome and developing biomarkers for milk processability and methane production. Additionally, the document highlights a study that modified sediment quantification tests for dairy powders to improve image analysis capabilities, with promising results. Further research is planned to investigate the effects of robotic agitation and test additional powders. [Extracted from the article]

Background Methods Results Conclusions Shared reading is an important opportunity for parents and children to connect and learn, which can support later independent reading skills. Much of the research to date has examined shared reading as parents read physical print books with their children. This research has demonstrated that parents tend to engage in more activities that emphasise the meaning of the stories over the code (i.e., print). Here, we examine the focus of shared reading when parents are reading with their children on paper versus on a digital device and whether this differs across the preschool years.A total of 253 parents of children aged 0–5 years completed an online self‐report questionnaire. Parents reported on the frequency of engaging in meaning‐ versus code‐related activities during shared book reading on paper and on screen with their youngest child. We conducted a linear regression analysis contrasting code‐ versus meaning‐related activities on paper versus screen modality with age as a continuous variable.Key to our objectives, parents reported engaging in meaning‐related activities more frequently during shared reading on paper versus on screens and in code‐related activities more frequently during shared reading on screens than on paper. These effects did not differ across age, although overall, parents reported engaging slightly more frequently in shared reading activities in general when their child was older.The findings show that parents are engaging with their children differently as they read together on paper versus screens. Consistent with prior research, we found that activities emphasising the meaning of stories dominate shared paper book reading experiences in the preschool years. Critically shared reading on screens tips this balance, with parents reporting more code‐related activities. These patterns identify the learning opportunities enabled by the affordances of shared reading on screens. [ABSTRACT FROM AUTHOR]

This work demonstrates our effort to develop stimuli responsive cellulose films for the detection of dimethyl amines, a biogenic amine, released during food decomposition. Herein, we demonstrate that thin layer deposition of polydiacetylene‐zinc oxide nanosheets (PDA‐ZnO) on cellulose (CE) paper yields a stimuli responsive strip exhibiting strong thermochromism and solvatochromism against dimethyl amine. The incorporation of Zn nanoclusters within the composite plays an essential role in achieving reversible thermochromism while strong intermolecular interactions promote adsorption of PDA‐ZnO on cellulose paper. X‐ray diffraction and infrared spectroscopy reveal that the Zn2+ ions intercalate with PDA bilayer and strongly interact with the carboxylate headgroup of PDA. Furthermore, the reversible thermochromism persist when the nanosheets are deposited on cellulose (CE) paper when assembling PDA‐ZnO−CE paper. In addition, PDA‐ZnO−CE displayed selective solvatochromism allowing the utilization of the paper in the detection of dimethyl amine as it displayed a distinct and remarkable purple to orange colour transition. In particular, the response of the PDA‐ZnO−CE paper in several other organic solvents was poor as no transitions were observed hence its selectivity towards dimethylamine. In conclusion, the incorporation of PDA‐ZnO on cellulose paper is a step forward towards designing of a stimuli responsive packaging material that can detect biogenic amines released during food decomposition thereby preventing food poisoning. [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]