Search

Regulating electronic structure of active centres to improve the performance of catalysts has always been a notable research topic, in which many challenges still need to be solved urgently. Herein, we report a PtFe3 intermetallic catalyst anchored on N-doped carbon spheres (PtFe3/CN) with electron-rich isolated Pt active sites. The electron-rich nature of isolated Pt sites is attributed to the coordination of low electronegativity iron atoms. The PtFe3/CN catalyst showed a catalytic performance for the hydrosilylation of alkene superior to traditional single-atom Pt catalyst (coordinate with N etc. atoms) loading on N-doped graphene carbon (Pt1/CN) with electron-deficient isolated Pt sites and Pt nanoparticles supported N-doped carbon spheres (Pt NPs/CN) catalysts with the contiguous Pt sites. More importantly, turnover number (TON) of alkene hydrosilylation can reach a striking ca. 740,000 and no Pt leaching was detected. The opinion has been substantiated by both experimental and theoretical results that the PtFe3/CN catalyst can completely catalyze conversion of alkene and exhibit a high selectivity for anti-Markovnikov addition under environmentally friendly and mild conditions.

The rechargeable Zn-air batteries as an environmentally friendly sustainable energy technology have been extensively studied. However, it is still a challenge to develop non-noble metal bifunctional catalysts with high oxygen reduction as well as oxygen evolution reaction (ORR and OER) activity and superior durability, which limit the large-scale application of rechargeable Zn-air batteries. Herein, we synthesized an ultrastable FeCo bifunctional oxygen electrocatalyst on Se-doped CNTs (FeCo/Se-CNT) via a gravity guided chemical vapor deposition (CVD) strategy. The catalyst exhibits excellent ORR (E1/2 = 0.9 V) and OER (overpotential at 10 mA cm-2 = 340 mV) properties simultaneously, surpassing commercial Pt/C and RuO2/C catalysts. More importantly, the catalyst shows an unordinary stability, that is, is no obvious decrease after 30K cycles accelerated durability test for ORR and OER processes. The small potential gap (0.75 V) represents superior bifunctional ORR and OER activities of the FeCo/Se-CNT catalyst. The FeCo/Se-CNT catalyst possesses outstanding electrochemical performance for the rechargeable liquid and flexible all-solid-state Zn-air batteries, for example, a high open circuit voltage (OCV) and peak power density of 1.543 and 1.405 V and 173.4 and 37.5 mW cm-2, respectively.

The development of the synthesis methods of single-atom catalysts (SACs) is of great significance for the study of the specificity of SACs. Herein, we report a strategy to immobilize Ru atom using ...

The oxidation of hydrocarbons to produce high value-added compounds (ketones or alcohols) using oxygen in air as the only oxidant is an efficient synthetic strategy from both environmental and economic views. Herein, we successfully synthesized cobalt single atom site catalysts (Co SACs) with high metal loading of 23.58 wt.% supported on carbon nitride (CN), which showed excellent catalytic properties for oxidation of ethylbenzene in air. Moreover, Co SACs show a much higher turn-over frequency (19.6 h−1) than other reported non-noble catalysts under the same condition. Comparatively, the as-obtained nanosized or homogenous Co catalysts are inert to this reaction. Co SACs also exhibit high selectivity (97%) and stability (unchanged after five runs) in this reaction. DFT calculations reveal that Co SACs show a low energy barrier in the first elementary step and a high resistance to water, which result in the robust catalytic performance for this reaction.

Developing a highly efficient, easy-to-fabricate and non-noble metal electrocatalyst is vital for the oxygen reduction reaction (ORR). Herein, we fabricate a single Fe site catalyst Fe1/d-CN by developing a double-layer MOF strategy. The Fe1/d-CN catalyst shows an excellent ORR activity in the pH-universal range, especially in alkaline electrolytes with a record-level half-wave potential of 0.950 V, exceeding those of almost all the reported non-noble electrocatalysts and the commercial Pt/C catalyst (0.863 V). Besides its exceptional ORR activity in alkaline electrolytes, it also exhibits comparable ORR activity to the commercial Pt/C catalyst in acidic and neutral electrolytes. We speculate that the sources of the excellent pH-universal ORR performance can be attributed to the regulation of the electronic structure of Fe centres and the excellent electron/proton transport capability that comes from the rich defects and hierarchical porous features of the Fe1/d-CN catalyst. More excitingly, the catalyst possesses remarkable durability, and exhibits a negligible decrease after 30k accelerated durability test (ADT) cycles in pH-universal media. The flexible quasi-solid-state alkaline rechargeable Zn–air batteries with the Fe1/d-CN catalyst as the cathode show superior performance such as a high OCV of 1.50 V and peak power density of 78.0 mW cm−2. Furthermore, the flexible quasi-solid-state neutral rechargeable Zn–air batteries also exhibited remarkable performance.

Electrocatalysis of four-electron oxygen reduction reaction (ORR) provides a promising approach for energy transfer, storage and oxygen monitoring. However, it is always accompanied by the reductio...

Recognizing and controlling the structure-activity relationships of single-atom catalysts (SACs) is vital for manipulating their catalytic properties for various practical applications. Herein, Fe SACs supported on nitrogen-doped carbon (SA-Fe/CN) are reported, which show high catalytic reactivity (97% degradation of bisphenol A in only 5 min), high stability (80% of reactivity maintained after five runs), and wide pH suitability (working pH range 3-11) toward Fenton-like reactions. The roles of different N species in these reactions are further explored, both experimentally and theoretically. It is discovered that graphitic N is an adsorptive site for the target molecule, pyrrolic N coordinates with Fe(III) and plays a dominant role in the reaction, and pyridinic N, coordinated with Fe(II), is only a minor contributor to the reactivity of SA-Fe/CN. Density functional theory (DFT) calculations reveal that a lower d-band center location of pyrrolic-type Fe sites leads to the easy generation of Fe-oxo intermediates, and thus, excellent catalytic properties.

Metal-gas batteries draw a lot of attention due to their superiorities in high energy density and stable performance. However, the sluggish electrochemical reactions and associated side reactions in metal-gas batteries require suitable catalysts, which possess high catalytic activity and selectivity. Although precious metal catalysts show a higher catalytic activity, high cost of the precious metal catalysts hinders their commercial applications. In contrast, nonprecious metal catalysts complement the weakness of cost, and the gap in activity can be made up by increasing the amount of the nonprecious metal active centers. Herein, recent work on carbon-based nonprecious metal catalysts for metal-gas batteries is summarized. This review starts with introducing the advantages of carbon-based nonprecious metal catalysts, followed by a discussion of the synthetic strategy of carbon-based nonprecious metal catalysts and classification of active sites, and finally a summary of present metal-gas batteries with the carbon-based nonprecious metal catalysts is presented. The challenges and opportunities for carbon-based nonprecious metal catalysts in metal-gas batteries are also explored.

In cooperative catalysis, the combination of chemo- and biocatalysts to perform one-pot reactions is a powerful tool for the improvement of chemical synthesis. Herein, UiO-66-NH2 was employed to stepwise immobilize Pd nanoparticles (NPs) and Candida antarctica lipase B (CalB) for the fabrication of biohybrid catalysts for cascade reactions. Distinct from traditional materials, UiO-66-NH2 has a robust but tunable structure that can be utilized with a ligand exchange approach to adjust its hydrophobicity, resulting in excellent catalyst dispersity in diverse reaction media. These attractive properties contribute to the formation of MOF-based biohybrid catalysts with high activity and selectivity in the synthesis of benzyl hexanoate from benzaldehyde and ethyl hexanoate. With this proof-of-concept, we reasonably expect that future tailor-made MOFs can combine other catalysts, ranging from chemical to biological catalysts for applications in industry.

The oxidation of intracellular biomolecules by reactive oxygen species (ROS) forms the basis for ROS-based tumor therapy. However, the current therapeutic modalities cannot catalyze H2 O2 and O2 concurrently for ROS generation, thereby leading to unsatisfactory therapeutic efficacy. Herein, it is reported a bioinspired hollow N-doped carbon sphere doped with a single-atom copper species (Cu-HNCS) that can directly catalyze the decomposition of both oxygen and hydrogen peroxide to ROS, namely superoxide ion (O2 •- ) and the hydroxyl radical (•OH), respectively, in an acidic tumor microenvironment for the oxidation of intracellular biomolecules without external energy input, thus resulting in an enhanced tumor growth inhibitory effect. Notably, the Fenton reaction turnover frequency of Cu species in Cu-HNCS is ≈5000 times higher than that of Fe in commercial Fe3 O4 nanoparticles. Experimental results and density functional theory calculations reveal that the high catalytic activity of Cu-HNCS originates from the single-atom copper, and the calculation predicts a next-generation Fenton catalyst. This work provides an effective paradigm of tumor parallel catalytic therapy for considerably enhanced therapeutic efficacy.

Metal nanoparticles occupy an important position in electrocatalysis. Unfortunately, by using conventional synthetic methodology, it is a great challenge to realize the monodisperse composition/structure of metal nanoparticles at the atomic level, and to establish correlations between the catalytic properties and the structure of individual catalyst particles. For the study of well-defined nanocatalysts, great advances have been made for the successful synthesis of nanoparticles with atomic precision, notably ligand-passivated metal nanoclusters. Such well-defined metal nanoclusters have become a type of model catalyst and have shown great potential in catalysis research. In this review, the authors summarize the advances in the utilization of atomically precise metal nanoclusters for electrocatalysis. In particular, the factors (e.g., size, metal doping/alloying, ligand engineering, support materials as well as charge state of clusters) affecting selectivity and activity of catalysts are highlighted. The authors aim to provide insightful guidelines for the rational design of electrocatalysts with high performance and perspectives on potential challenges and opportunities in this emerging field.

Development of noble-metal single atomic site catalysts with high metal loading is highly required for many important chemical reactions but proves to be very challenging. Herein, we report a Na2CO3 salt-assisted one-pot pyrolysis strategy from EDTA–Pt complex to N-doped graphene with isolated Pt single atomic sites (Pt-ISA/NG) with Pt loading up to 5.3 wt %. The X-ray absorption fine structure analysis and spherical aberration-correction electron microscopy demonstrate an atomic dispersion of single Pt species on graphene support and stabilized by nitrogen in Pt–N4 structure. The Pt-ISA/NG catalyst exhibits high catalytic activity and reusability for anti-Markovnikov hydrosilylation of various terminal alkenes with industrially relevant tertiary silanes under mild conditions. In hydrosilylation of 1-octene, the Pt-ISA/NG catalyst delivers an overall turnover frequency of 180 h–1, which is a 4-fold enhancement compared with commercial Pt/C.

Flexible Zn-air batteries (ZABs) draw much attention due to the merits of high energy density, stability, and safety, and show potential applications for wearable devices. However, the development of flexible ZABs with great energy density, high round-trip efficiency, and long cycle life for practical applications is highly restricted by the lack of highly active oxygen catalysts, high ion-conducting solid-state electrolytes, appropriate Zn anodes, and advanced battery configuration. Promising oxygen catalysts should possess both, superior oxygen reduction reaction and oxygen evolution reaction performance and can be directly used as self-supporting cathodes without loading catalysts on support materials such as carbon cloth. In addition, electrolytes play an important role in ZABs; a good electrolyte should be in all-solid state with high ion conductivity. Moreover, for an excellent Zn anode, it is required to stably contact the electrolyte interface during the bending process. Therefore, in this review, recent advances in ZABs are summarized, including: i) the powder and 3D self-supporting oxygen catalysts, ii) the species of solid-state electrolytes, and iii) the rational design of Zn anodes. Finally, the challenges and opportunities of this promising field are presented.

Noble metals play a momentous role in heterogeneous catalysis but still face a huge challenge in selectivity control. Herein, we report isolating contiguous Pt atoms and forming Pt-Zn intermetallic nanoparticles as an effective strategy to optimize the selectivity of Pt catalysts. Contiguous Pt atoms are isolated into single atoms and Pt-Zn intermetallic nanoparticles are formed which are supported on hollow nitrogen-doped carbon nanotubes (PtZn/HNCNT), as confirmed by aberration-corrected high-resolution transmission electron microscopy and X-ray absorption spectrometry measurements. Interestingly, this PtZn/HNCNT catalyst promotes the hydrogenation of 4-nitrophenylacetylene to 4-aminophenylacetylene with a much higher conversion ( > 99%) and selectivity (99%) than the comparison samples with Pt isolated-single-atomic-sites (Pt/HNCNT) and Pt nanoparticles (Pt/CN). Further density functional theory (DFT) calculations disclose that the positive Zn atoms assist the adsorption of nitro group and Pt-Zn intermetallic nanoparticles facilitate the hydrogenation on nitro group kinetically., Noble metals play a momentous role in heterogeneous catalysis but still face a huge challenge in selectivity control. Herein, the authors demonstrate that isolating contiguous Pt atoms and forming Pt-Zn intermetallic nanoparticles is an effective strategy to optimize the selectivity of Pt catalysts.

Single-atom catalysts (SACs) have been explored widely as potential substitutes for homogeneous catalysts. Isolated cobalt single-atom sites were stabilized on an ordered porous nitrogen-doped carbon matrix (ISAS-Co/OPNC). ISAS-Co/OPNC is a highly efficient catalyst for acceptorless dehydrogenation of N-heterocycles to release H2 . ISAS-Co/OPNC also exhibits excellent catalytic activity for the reverse transfer hydrogenation (or hydrogenation) of N-heterocycles to store H2 , using formic acid or external hydrogen as a hydrogen source. The catalytic performance of ISAS-Co/OPNC in both reactions surpasses previously reported homogeneous and heterogeneous precious-metal catalysts. The reaction mechanisms are systematically investigated using first-principles calculations and it is suggested that the Eley-Rideal mechanism is dominant.

We successfully prepared Fe and Co isolated single atoms on metal-organic framework derived nitrogen-doped carbon (FeCo-ISAs/CN) by an adsorption-calcination strategy. The obtained FeCo-ISAs/CN exhibited top-level catalytic reactivity for the alkaline oxygen reduction reaction (ORR) with a half-wave potential of 0.920 V, which was 70 mV more positive than that of commercial Pt/C. Moreover, the catalyst was durable and showed negligible activity decay in the alkaline ORR during 5000 voltage cycles.

The search for a low-cost, ultrastable, and highly efficient non-precious metal catalyst substitute for Pt in the oxygen reduction reaction (ORR) is extremely urgent, especially in acidic media. Herein, we develop a template-assisted pyrolysis (TAP) method to obtain a unique Co catalyst with isolated single atomic sites anchored on hollow N-doped carbon spheres (ISAS-Co/HNCS). Both the single sites and the hollow substrate endow the catalyst with excellent ORR performance. The half-wave potential in acidic media approaches that of Pt/C. Experiments and density functional theory have verified that isolated Co sites are the source for the high ORR activity because they significantly increase the hydrogenation of OH* species. This TAP method is also demonstrated to be effective in preparing a series of ISAS-M/HNCS, which provides opportunities for discovering new catalysts.

A novel polymer encapsulation strategy to synthesize metal isolated-single-atomic-site (ISAS) catalysts supported by porous nitrogen-doped carbon nanospheres is reported. First, metal precursors are encapsulated in situ by polymers through polymerization; then, metal ISASs are created within the polymer-derived p-CN nanospheres by controlled pyrolysis at high temperature (200-900 °C). Transmission electron microscopy and N2 sorption results reveal this material to exhibit a nanospheric morphology, a high surface area (≈380 m2 g-1 ), and a porous structure (with micropores and mesopores). Characterization by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure confirms the metal to be present as metal ISASs. This methodology is applicable to both noble and nonprecious metals (M-ISAS/p-CN, M = Co, Ni, Cu, Mn, Pd, etc.). In particular, the Co-ISAS/p-CN nanospheres obtained using this method show comparable (E1/2 = 0.838 V) electrochemical oxygen reduction activity to commercial Pt/C with 20 wt% Pt loading (E1/2 = 0.834 V) in alkaline media, superior methanol tolerance, and outstanding stability, even after 5000 cycles.

Correction for ‘Isolated Fe and Co dual active sites on nitrogen-doped carbon for a highly efficient oxygen reduction reaction’ by Diyang Zhang et al., Chem. Commun., 2018, DOI: 10.1039/c8cc00988k.