Search

// Qing-Bo Lv 1 , Xiang Gao 1 , Xiang Liu 1 , Zhen-Xuan Shao 1 , Qian-Hui Xu 1 , Li Tang 1 , Yong-Long Chi 1 and Ai-Min Wu 1 1 Department of Orthopedics, Bone Research Institute, The Second Affiliated Hospital and Yuying Children’s Hospital of Wenzhou Medical University, Second Medical School of Wenzhou Medical University, Wenzhou, Zhejiang, China Correspondence to: Ai-Min Wu, email: // Keywords : serum 25-hydroxyvitamin D, hip fracture, meta-analysis, dose-response Received : December 14. 2016 Accepted : February 13, 2017 Published : March 17, 2017 Abstract Hip fracture has increasingly become a social and economic burden. The relationship between serum 25-hydroxyvitamin D levels and the risk of hip fracture reported by previous studies remains controversial. We searched Pubmed and Embase to identify studies reporting the relationship between serum 25-hydroxyvitamin D levels and risk of hip fracture. Fifteen prospective cohort studies with a total of 51239 participants and 3386 hip fracture cases were included. By pooling the Relative Risk of the lowest vs. the highest categories indicated that lower levels of serum 25-hydroxyvitamin D were more likely to be a risk factor for hip fracture with adjusted Relative Risk (95%Confidence Interval) of 1.58 (1.41, 1.77). Subgroup meta-analysis examining the stability of the primary results achieved the same results. A dose-response meta-analysis showed that the risk of hip fracture was a descending curve below the line of RR=1. The descending trend was obvious when serum 25-hydroxyvitamin D levels were less than 60 nmol/L and was flat when serum 25-hydroxyvitamin D levels were more than 60 nmol/L. We found that individuals with low levels of serum 25-hydroxyvitamin D have an increased risk of hip fracture, and this effect was evident when the serum 25-hydroxyvitamin D levels were less than 60 nmol/L.

Purpose. To investigate the evidence of minimally invasive (MI) versus open (OP) posterior lumbar fusion in treatment of lumbar spondylolisthesis from current prospective literatures.Methods. The electronic literature database of Pubmed, Embase, and Cochrane library was searched at April 2016. The data of operative time, estimated blood loss and length of hospital stay, visual analog scale (VAS) of both lower back pain and leg pain, Oswestry disability index (ODI), SF-36 PCS (physical component scores) and SF-36 MCS (mental component scores), complications, fusion rate, and secondary surgery were extracted and analyzed by STATA 12.0 software.Results. Five nonrandom prospective comparative studies were included in this meta-analysis. The meta-analysis showed that the MI group had a significantly longer operative time than OP group, less blood loss, and shorter hospital stay. No significant difference was found in back pain, leg pain, ODI, SF-36 PCS, SF-36 MCS, complications, fusion rate, and secondary surgery between MI and OP groups.Conclusion. The prospective evidence suggested that MI posterior fusion for spondylolisthesis had less EBL and hospital stay than OP fusion; however it took more operative time. Both MI and OP fusion had similar results in pain and functional outcomes, complication, fusion rate, and secondary surgery.

STUDY DESIGN A prospective study of anterior transarticular screw (ATS) fixation patients. OBJECTIVE To develop a method to determine screw tip position through plain radiography after percutaneous ATS fixation to prevent occipitocervical joint (OCJ) violation. SUMMARY OF BACKGROUND DATA No studies using plain radiography to prevent OCJ violation during percutaneous ATS fixation have been performed. METHODS In total, 34 subjects (with 68 screws) who had undergone percutaneous ATS fixation were enrolled. To evaluate the screw tip location in relation to the C1 lateral mass (LM), the screw tip positions were graded 1, 2, or 3 on anteroposterior (AP) radiographs, and I, II, or III on lateral radiographs. OCJ violation was analyzed by postoperative computed tomography (CT). RESULTS Screws with tips located lower (tip I) in the LM did not result in OCJ violation. Only one tip in the tip 3 position showed OCJ perforation, and this screw was also located in tip III. Screw perforation rates of tip 1-tip II, tip 1-tip III, and tip 2-tip III were the highest (100%), followed by tip 2-tip II (10.5%) and tip3-tip III (10%). CONCLUSION This study provides insights into OCJ violation during percutaneous ATS fixation. According to AP radiography, a percutaneous ATS with the screw tip located in the lateral part of the LM resulted in a lower rate of OCJ perforation, whereas screws located in the medial LM resulted in the highest rate of perforation. Percutaneous ATS with the screw tip located in the neutral part of the LM should ensure that the screw tip is below the upper part of the LM, preventing OCJ violation. These findings may help surgeons assess screw positioning both during and after the operation. LEVEL OF EVIDENCE 3.

To describe the technique and clinical results of percutaneous atlantoaxial anterior transarticular fixation combined with limited exposure posterior C1/2 arthrodesis in patients with a high-riding vertebral artery.Zhejiang Spine Center, China.Five patients with a high-riding vertebral artery and an upper cervical fracture.Percutaneous atlantoaxial anterior transarticular screw fixation combined with limited exposure posterior C1/2 wire fusion.Computed tomography scans were used to assess the high-riding vertebral artery and feasibility of anterior transarticular screw fixation preoperatively. A Philadelphia collar was used to immobilize the neck postoperatively. Anteroposterior (open-mouth) and lateral views were obtained at pre/postoperation and at the follow-up.The operation was performed successfully on all of the patients, and no intraoperative operation-related complications such as nerve injury, vertebral artery, and soft tissue complications occurred. The mean follow-up period was 33.8 months (range: 24 to 58 months). No screw breakage, loosening, pullout, or cutout was observed. Bone union was achieved in all patients at the last follow-up.Our small case series results suggested that percutaneous anterior transarticular screw fixation combined with mini-open posterior C1/2 wire fusion is a technically minimally invasive, safe, feasible, and useful method to treat patients with a high-riding vertebral artery.

We did a clinical trial to determine whether olfactory mucosa lamina propria (OLP) transplants promote regeneration and functional recovery in chronic human spinal cord injury (SCI). The trial randomized 12 subjects to OLP transplants ( n = 8) or control sham surgery ( n=4). The subjects received magnetic resonance imaging (MRI), electromyography (EMG), urodynamic study (UDS), American Spinal Injury Association impairment scale (AIS), and other functional assessments. OLP-transplanted subjects recovered more motor, sensory, and bladder function compared to sham-operated subjects. At 3 years after OLP transplant, one patient improved from AIS A to C and another recovered from AIS A to B, two recovered more than three segmental sensory levels, two had less spasticity, two had altered H-reflexes and SSEP, two regained bladder and anorectal sensation and had improved bladder compliance on UDS. OLP-treated patients had partial or complete tissue bridges at the injury site compared to cavitary gaps in sham-operated patients. The limited recovery suggests that OLP transplants alone do not have significant benefits but may provide a rationale for larger randomized trials or combination therapies.

To evaluate the relationship between height ratio of the iliac crest to L4 (HR), width ratio of the iliac crest to L4 (WR) and L5–S1 disc degeneration. On T2-weighted sagittal images of the 50 randomly selected patients, two observers graded L5–S1 discs and some other parameters were measured. Then, relative signal intensity (RSI) of the L5–S1 nucleus pulposus was calculated. On anteroposterior and lateral radiographs of the same 50 patients’ lumbar spine, the parameters such as the height of the iliac crest were measured and then HR and WR were calculated. Finally, HR, WR and the percentage of the sROM of L5–S1 in L1–S1 segments of the other 51 randomly selected patients were calculated. Positive correlations were found between HR, WR and RSI of the L5–S1 disc. Negative correlations were found between HR, WR and modified Pfirrmann scores of L5–S1 nucleus pulposus. A statistically significant negative correlation was found between HR and the percentage of sROM of L5–S1 in L1–S1 segments. Low HR and (or) WR were the risk factors for L5–S1 disc degeneration. High HR could reduce the percentage of sROM of L5–S1 in L1–S1 segments and high HR and (or) WR could reduce the incidence of L5–S1 disc degeneration.

To design and investigate a novel technique of percutaneous posterior transdiscal oblique screw fixation with lateral interbody fusion. CT scans of 45 patients were collected and imported into Mimics software for three-dimensional (3D) reconstruction. Cylinders were drawn to simulate the trajectory of the oblique screw. Six measurements were obtained for each unit to design a right size cage: a the distance between the intersection of the simulated trajectory of the screw with the inferior border of the upper vertebra and its anteroinferior corner; b the distance between the intersection of the simulated trajectory of the screw with the superior border of the inferior vertebra and its anterosuperior corner; h the height of the intervertebral space; θ the angle between simulated trajectory of screw and the upper endplate of inferior vertebra; uw: the width of the inferior endplate of upper vertebra; iw: the width of upper endplate of inferior vertebra. Three intact adult fresh-frozen cadaveric specimens were obtained, percutaneous posterior transdiscal oblique screw fixation was performed under X-ray apparatus, and interbody cage was implanted by assistance with special self-retaining retractor system and endoscope. According to the results of data measured from 3D images, trapezoid shape interbody cages with suitable size were designed. Percutaneous posterior oblique screw fixation with lateral interbody fusion was performed on three cadaveric specimens successfully. Using specially designed trapezoid shape interbody cages, assisted by intra-operative image intensification and endoscope, it is feasible to perform percutaneous posterior transdiscal oblique screw fixation with lateral interbody fusion technique.

Osteoporotic fracture is a significant cause of morbidity and mortality and is a challenging global health problem. Previous reports of the relation between vitamin A intake or blood retinol and risk of fracture were inconsistent. We searched Medline and Embase to assess the effects of vitamin A (or retinol or beta-carotene but not vitamin A metabolites) on risk of hip and total fracture. Only prospective studies were included. We pooled data with a random effects meta-analysis with adjusted relative risk (adj.RR) and 95% confidence interval (CI). We used Q statistic and I2 statistic to assess heterogeneity and Egger's test to assess publication bias. Eight vitamin A (or retinol or beta-carotene) intake studies (283,930 participants) and four blood retinol level prospective studies (8725 participants) were included. High intake of vitamin A and retinol were shown to increase risk of hip fracture (adj.RR [95% CI] = 1.29 [1.07, 1.57] and 1.40 [1.03, 1.91], respectively), whereas beta-carotene intake was not found to increase the risk of hip fracture (adj.RR [95% CI] = 0.82 [0.59, 1.14]). Both high or low level of blood retinol was shown to increase the risk of hip fracture (adj.RR [95% CI] = 1.87 [1.31, 2.65] and 1.56 [1.09, 2.22], respectively). The risk of total fracture does not differ significantly by level of vitamin A (or retinol) intake or by blood retinol level. Dose-response meta-analysis shows a U-shaped relationship between serum retinol level and hip fracture risk. Our meta-analysis suggests that blood retinol level is a double-edged sword for risk of hip fracture. To avoid the risk of hip fracture caused by too low or too high a level of retinol concentration, we suggest that intake of beta-carotene (a provitamin A), which should be converted to retinol in blood, may be better than intake of retinol from meat, which is directly absorbed into blood after intake. © 2014 American Society for Bone and Mineral Research.

Imaging study.X-ray and computed tomography (CT) sagittal reconstruction images are used to evaluate the stability of the spine. However, we did not know the extent of difference between them.The aim of the study was to compare the differences seen in thoracolumbar burst fractures on lateral radiographs and CT sagittal reconstruction images and investigate their clinical relevance.Lateral radiographs and CT sagittal reconstruction images of 45 patients with thoracolumbar burst fractures were used to record the following measurements: the compressed area of the fractured vertebrae, from lateral radiographs, and the sagittal compressed area, bony fragment area, and total fracture-involved area, from CT sagittal reconstruction images.The percentage of compressed area of fractured vertebrae was 29.32±13.80% on lateral radiographs and 27.93±12.21% on CT sagittal reconstruction images; there was no significant difference between them (P0.05). The percentage of total fracture-involved area was 53.20±20.64% on CT sagittal reconstruction images, higher than the compressed area measured on lateral radiographs (P0.01) and CT sagittal reconstruction images (P0.01). The percentage of bony fragment area was 25.27±15.18% on CT sagittal reconstruction images; there was no significant relationship between bony fragment area and the compressed area (r=0.1258, P0.05).The compressed area of fractured vertebrae on lateral radiographs could not represent the fracture-involved area and underestimated the total fracture-involved area. We suggested that the above 3 parameters could be easily obtained on CT sagittal reconstruction images, which might be better for assessing the potential instability of the thoracolumbar burst fracture and could become a valuable and indispensable examination for therapeutic decision making.

Study design A retrospective comparative study. Objective The purpose of this study is to assess radiologic features of intravertebral cleft (IVC) in nonacute osteoporotic vertebral compression fractures (OVCFs) patients, and analyze the existence of IVC impact on outcomes of percutaneous kyphoplasty (PKP). Summary of background data The IVC sign is regarded as vertebral instability and the cause of persisting pain. It is more likely to happen at nonacute OVCFs patients. Patients with IVC sign have different outcomes from these without IVC treated by percutaneous vertebroplasty. There were rare reports about the outcomes of patients with IVC sign treated by PKP. Materials and methods We divided 92 nonacute OVCFs patients (total of 113 vertebrae) into 2 groups according to the existence of IVC. Preoperative and postoperative Visual Analogue Scales, Oswestry Disability Index, kyphotic angulation (KA), and anterior vertebral height were recorded; the incidence and radiologic features of IVC were analyzed. Results The diagnostic sensitivity of IVC on plain radiograph, computed tomography, and magnetic resonance imaging were 35.4%, 89.3%, and 83.3%, respectively. The IVC group had an average correction KA of 9.14 degrees and reduction of ratio of compression of 20.09%, and the non-IVC group was 8.76 degrees and 20.23%, respectively. Cleft pattern of cement accounted for 64.6% in IVC group and 27.7% in non-IVC group. Five/7 of cement leakage in IVC group was intradiscal leakage, whereas 7/9 of cement leakage in non-IVC group was perivertebral leakage. Conclusions Computed tomography and magnetic resonance imaging were more sensitivity to diagnose IVC sign than X-ray. PKP could improve pain, functional activity, KA, and anterior height of both IVC and non-IVC groups, however, there was more cleft pattern of cement and higher intradiscal cement leakage in the IVC group.

This study is a computed tomographic (CT)-based morphometric analysis of the pediatric occipital condyles as related to occipital condyle screw placement.To quantify reference data concerning the dimensions of the immature occipital condyles to guide the placement of occipital condyle screw.To the best of our knowledge, no published study has provided insight into the anatomy of occipital condyle of the pediatric population with different age groups.Sixty-nine pediatric patients were divided into 4 age groups, and their occipital condyles were studied on CT scans. Condylar length, width, height, sagittal angle, and sagittal angle lengths were measured on Philips Brilliance 16 CT.The mean pediatric coronal height, sagittal length, and axial width noted statistically significant age-related differences were 9.0 mm, 21.3 mm, and 9.8 mm, respectively. The mean sagittal angle for all patients was 27.2 ± 5.1° (range, 15.1-41.0°). In 82.6% (114/138) of the occipital condyles, the anatomy could accept the occipital condyle screw (width ≥8 mm and height ≥6.5 mm).Our investigation provides insight into the anatomy of occipital condyle of the pediatric population with different age groups. As the pediatric occipital condyles have sufficient occipital bone for appropriate fixation or fusion, the occipital condyle screws fixation is a feasible technique for children. Even so, given the evolution of this technique being still in its infancy and the complexity inherent to the craniovertebral junction, a careful radiological analysis of occipital condyle must be required in preoperative planning and feasibility determination.N/A.

The purpose of this study was to determine whether it would be feasible to use oblique lumbar interbody fixation for patients with degenerative lumbar disease who required a fusion but did not have a spondylolisthesis. A series of CT digital images from 60 patients with abdominal disease were reconstructed in three dimensions (3D) using Mimics v10.01: a digital cylinder was superimposed on the reconstructed image to simulate the position of an interbody screw. The optimal entry point of the screw and measurements of its trajectory were recorded. Next, 26 cadaveric specimens were subjected to oblique lumbar interbody fixation on the basis of the measurements derived from the imaging studies. These were then compared with measurements derived directly from the cadaveric vertebrae. Our study suggested that it is easy to insert the screws for L1/2, L2/3 and L3/4 fixation: there was no significant difference in measurements between those of the 3-D digital images and the cadaveric specimens. For L4/5 fixation, part of L5 inferior articular process had to be removed to achieve the optimal trajectory of the screw. For L5/S1 fixation, the screw heads were blocked by iliac bone: consequently, the interior oblique angle of the cadaveric specimens was less than that seen in the 3D digital images. We suggest that CT scans should be carried out pre-operatively if this procedure is to be adopted in clinical practice. This will assist in determining the feasibility of the procedure and will provide accurate information to assist introduction of the screws. Cite this article: Bone Joint J 2013;95-B:977–82.

Purpose This is a meta-analysis of randomized and non-randomized studies comparing the clinical and radiological efficacy of minimally invasive (MI) and conventional open transforaminal lumbar interbody fusion (open-TLIF) for degenerative lumbar diseases.

To investigate the feasibility of mini-open anterior approach to the cervicothoracic junction (CTJ) in cadaveric specimens.Four adult fresh-frozen cadaveric specimens were used for this study. On the cadaveric specimen, an osteotomy window was made in manubrium sterni to remove the bony obstacle. To bypass the vital vascular and neural structures over the operative field, we used the surgical corridor which was located medially by the brachiocephalic artery and laterally by the right brachiocephalic vein, or in combination with another surgical corridor between the ascending aorta and the superior vena cava. And we used a special self-retaining retractor system and an endoscope to facilitate the procedures.Surgical procedures performed on the four fresh-frozen cadaveric specimens to expose the CTJ through mini-open anterior approach were successful. The anterior surface of C6-T5 could be exposed, allowing complete decompression and application of locking plate and screws. The most caudal accessible vertebral body was T5 vertebral body in our study.It is feasible to expose the CTJ through this mini-open anterior approach.

To assess the feasibility and efficacy of TLIF with unilateral pedicle screw and contralateral percutaneous lumbar transfacet screw fixation for the treatment of lumbar degenerative disorders.A series of computed tomography (CT) digital images from 60 patients (30 males and 30 females) with L3-S1 segments, were reconstructed in three dimensions using a software named Xelis 3D. Linear and angular measurements of the facets were recorded. Fifty-six patients were divided to either bilateral pedicle screw fixation (BPS) (n=30) or unilateral pedicle screw and contralateral percutaneous transfacet screw fixation (UPFS) (n=26) groups. The operating time, blood loss, length of hospital stay, clinical outcomes, fusion and complication rates were compared between the two groups.The parameters of the facets we recorded were no significant differences between the left and right sides (p0.05). No statistically significant differences between males and females were observed, except the maximum width of superior facet at L4 and S1, and length of screw at all levels. Intraoperative parameters, such as operating time, blood loss and postoperative hospital stay had significantly larger in the BPS group than UPFS group (p0.05). No significant differences were found between the two groups in clinical results, fusion and complication rates (p0.05).Because of the similar clinical outcomes but less operative time, blood loss and length of postoperatively hospital stay, unilateral pedicle screw and contralateral percutaneous lumbar transfacet screw fixation might be an attractive technique compared to bilateral pedicle screw fixation for treating lumbar degenerative disorders with TLIF. Nevertheless differences of the anatomical parameters for the lumbosacral facets fixation between Chinese and Westerners should be noted.

To investigate biomechanical properties of posterior transpedicular–transdiscal (TPTD) oblique lumbar screw fixation whereby the screw traverses the inferior pedicle across the posterior disc space into the super-adjacent body and lateral trapezoidal interbody spacer. Eight fresh–frozen osteoligamentous human cadaveric spines (L1–S1) were tested in flexion–extension (FE), lateral bending (LB), and axial rotation (AR), with pure bending moment set at 7.5 Nm. Surgical constructs included (1) intact spine; (2) bilateral pedicle screw (BPS) fixation at L3–L4; (3) TPTD screw fixation at L3–L4; (4) lateral L3–L4 discectomy; (5) TPTD screw fixation with lateral interbody spacer (TPTD+S); and (6) BPS fixation with lateral interbody spacer (BPS+S). Peak range of motion (ROM) at L3–L4 was normalized to intact for statistical analysis. In FE and LB, all posterior fixation with or without interbody spacers significantly reduced motion compared with intact and discectomy. BPS and BPS+S provided increased fixation in all planes of motion; significantly reducing FE and LB motion relative to TPTD (p = 0.005, p = 0.002 and p = 0.020, p = 0.004, respectively). In AR, only BPS significantly reduced normalized ROM to intact (p = 0.034); BPS+S provided greater fixation compared with TPTD+S (p = 0.005). Investigators found less stiffness with TPTD screw fixation than with BPS regardless of immediate stabilization with lateral discectomy and spacer. Clinical use should be decided by required biomechanical performance, difficulty of installation, and extent of paraspinal tissue disruption.

Prospective consecutive series.To evaluate the efficacy and safety of percutaneous pedicle screw fixation (PPSF) for thoracolumbar AO type A3 fractures with a specially designed surgical instrument system.Minimally invasive surgery including PPSF is becoming increasingly widespread in the spine surgery. The technique of PPSF was mostly used as supplemental fixation combined with minimally invasive posterior or anterior lumbar interbody fusion in management of lumbar degenerative disorders. There are fewer studies available in literature regarding PPSF without additional kyphoplasty or vertebroplasty for management of thoracolumbar burst fractures.Thirty-six adult patients, who had single thoracolumbar AO type A3 fractures and the load-sharing score of 6 or less, underwent application of percutaneous short-segment pedicle screw fixation. Radiologic parameters including kyphotic angle and vertebral height loss were assessed before and after surgery, and functional outcome was evaluated by Prolo questionnaire.All patients were successfully managed with percutaneous minimal invasive procedures. The average operative time was 78 minutes (range 62 to 117 min). The average intraoperative blood loss was 75 mL (range 50 to 220 mL). After a mean follow-up of 48.5 months (range 32 to 63 mo), 31 of 36 (86.1%) patients had a satisfactory result (19 excellent and 12 good) and 5 of them fair.Our clinical results suggest that PPSF can be an alternative for management of thoracolumbar AO type A3 fractures that have no neurologic deficits. With a specially designed percutaneous instrument and pedicle screw system, the procedure has been proved as relatively safe and a minimally invasive approach for the management of thoracolumbar burst fracture without neurologic deficit.

To determine the location of left brachiocephalic vein (BCV) and tracheal bifurcation (TB) relative to the vertebral levels, and to ascertain the accessibility of three different corridors (C1: between the esophagus and trachea medially and the carotid sheath laterally, C2: between the right BCV and the brachiocephalic artery, and C3: between the ascending aorta and superior vena cava) for preoperative planning. From August 2008 to April 2009, normal chest CT scans of 150 subjects ranging in age from 18 to 78 years were selected. According to our definition, of the 150 studies, 132 T2 vertebral bodies (VBs) could be accessed through C1 (88.0%), 100 T3 VBs could be reached through C2 (66.7%), and 110 T4 VBs could be exposed through C3 (73.3%). The results suggest that the surgical accessibility of three different corridors is different and we conclude that T2, T3, and T4 are, respectively, readily accessible through C1, C2, and C3.

Bone marrow stromal cells (BMSCs) could be induced to differentiate into neural cells under certain conditions, nevertheless, optimal protocols that could be reproducible and reliable in generating transplantable BMSCs in vitro are still not available. We studied for the first time the neural differentiation of BMSCs induced by coculturing with olfactory ensheathing cells (OECs). BMSCs and OECs were isolated from bone marrow and nasal olfactory lamina propria of adult SD rats respectively, then brought to coculture with transwell culture dishes. At various time points (0h, 6h, 12h, 24h, 72h, 1 week and 2 weeks post-coculture), BMSCs were morphologically observed and processed for immunofluorescence and reverse transcription-polymerase chain reaction (RT-PCR). The number of cells assuming neural morphology dramatically increased at 1- and 2-week-post-coculture, so as the number of immunoreactive cells labeled by neural markers NSE, beta-III-tubulin, MAP2, GFAP and p75(NTR). Our findings demonstrate that BMSCs can efficiently differentiate into neural cells when coculturing with OECs, and the present protocol provides an alternative neurogenesis pathway for generating sufficient numbers of neural cells from BMSCs.

Study Design. An in vitro biomechanical investigation. Objectives. The purpose of this study was to investigate the association between various load-sharing score and the acute flexibility of thoracolumbar fractures by measuring the 3-dimensional flexibility data. of Background Data. The load-sharing classification is a way to describe the injury severity of a spinal fracture and can be very useful in determining successful candidates for the choice of operative approaches. However, this classification needs to be validated by biomechanical and more clinical studies before its widespread use. To date, no biomechanical study was available. Methods. Eighteen fresh bovine T12-L3 specimens were harvested and divided into 3 groups, and subjected to axial compressive impact with 63.8, 107.8, and 137.2 J energy, respectively. Radiograph films and computed tomography scans of the experimental spine were taken in neutral posture after trauma. Multidirectional flexibility of each specimen was measured under flexion-extension, right/left lateral bending, and right/left axial rotation before and after trauma. The association between the multidirectional instabilities and the vertebral injuries to each of load-sharing point score was analyzed. Results. The load-sharing score of a fracture increased with the level of impact energy. Significant positive correlations were found between the load-sharing score and the motion parameters (average R 2 = 0.434, average P = 0.004). Fractures with mild comminution (≤6 points) showed more stability as compared to those with more comminution (a7 points) (P ≤ 0.016). Conclusion. This study confirms that assessing the load-sharing score should be helpful in evaluating the acute instability of thoracolumbar fractures, and justifies the use of load-sharing classification in the thoracolumbar fractures.

Purpose. To determine whether unilateral pedicle screw fixation is comparable with unilateral pedicle screw and contralateral percutaneous transfacet screw fixation in single-level lumbar spinal fusion. Methods. Fifty-eight patients were divided into either unilateral (n = 32) or unilateral pedicle screw and contralateral percutaneous transfacet screw fixation (n = 26) instrumentation groups. The operating time, blood loss, length of hospital stay, clinical outcomes, total lumbar scoliotic changes, and fusion and complication rates were compared between the two groups. Results. There were no significant differences between the two groups in blood loss, length of hospital stay, clinical results, total lumbar scoliotic changes, and fusion and complication rates. There were significant differences in duration of operating time between 2 groups. Conclusions. Unilateral pedicle screw fixation may be as effective as unilateral PS with contralateral percutaneous transfacet screw fixation for the treatment of lum...

To explore the operative skills and effect of unilateral pedicle screw combined with contralateral percutaneous transfacet screws fixation in treating degenerative low lumbar disease.From January 2009 to December 2011,22 patients with degenerative low lumbar disease were treated with transforaminal lumbar interbody fusion, during the operations, unilateral pedicle screw and contralateral percutaneous transfacet screw fixation were performed. There were 16 males and 6 females, aged from 32 to 71 years old with an average of (51.1 ± 10.6) years, including single segment in 20 cases and two segments in 2 cases. Clinical effects were evaluated according to visual analogue score (VAS) and Oswestry Disability Index (ODI).All patients were followed up from 1 to 2.5 years with an average of 18 months. One case complicated with leakage of cerebrospinal fluid after operation and 1 case with lower limb pain of decompression-side on the 3rd day after operation. Twenty-two patients got bony fusion. There were no instability and evidence of instrument failure during follow-up. The VAS and ODI score decreased from preoperative 8.24 ± 0.72, 36.72 ± 6.84 respectively to 3.18 ± 0.66, 4.36 ± 1.12 at the final follow-up (P0.05).Unilateral pedicle screw combined with contralateral percutaneous transfacet screw fixation is safe and feasible surgical technique in treating low lumbar degenerative disease. It has advantages of little trauma, rigid fixation, high fusion rate, and less complication. etc.

STUDY DESIGN Laminoplasty was simulated using a computer-assisted technique to assess the amount of canal expansion. OBJECTIVES This study was designed to clarify the relationship between laminoplasty opening size and increase in sagittal canal diameter, increase in canal area, and the angle of the opened lamina following laminoplasty, and to determine whether a spinous process-splitting laminoplasty achieves the similar canal expansion as a single open-door method. SUMMARY OF BACKGROUND DATA Single and double-door cervical laminoplasty (SDCL and DDCL, respectively) have been widely used in the treatment of multilevel stenotic conditions. However, the relationship between laminoplasty opening size and spinal canal expansion following laminoplasty, and the comparison of postoperative spinal canal expansion between single and double-door techniques have not been well investigated. METHODS SDCL and DDCL, based on preoperative computerized tomography scans of 34 patients who had undergone the laminoplasty surgery, were simulated using a computer-assisted technique. Laminoplasty with an opening size of 6, 8, 10, 12, 14, 16, and 18 mm were simulated to determine the amount of canal enlargement with the various opening size. RESULTS Sagittal diameter, canal area, and lamina angle were increased steadily following either single or double-door laminoplasty with the door opened from 6 to 18 mm. Significant positive correlation was found between laminoplasty opening size and increase in sagittal diameter (R2 = 0.969 and P = 0.001 in SDCL; R2 = 0.926 and P < 0.001 in DDCL), increase in canal area (R2 = 0.961 and P < 0.001 in SDCL; R2 = 0.937 and P < 0.001 in DDCL), and lamina angle (R2 = 0.959 and P < 0.001 in SDCL; R2 = 0.943 and P < 0.001 in DDCL). No significant correlation was observed between preoperative sagittal diameter and increase in sagittal diameter of the spinal canal, whereas significant positive correlation was found between preoperative cross-section area and increase in cross-section area of the spinal canal. The differences between postoperative canal increase in sagittal diameter and canal area for the single versus double-door technique were statistically significant when the door was opened by more than 12 mm (P < 0.05). CONCLUSIONS Our investigation provides insight into canal expansion after laminoplasty. The increased amount of canal following laminoplasty can be predicted by the regression equations. This may allow preoperative determination of the optimal size of the opening needed to establish adequate canal space for the spinal cord. Both single and double-door techniques of laminoplasty provide sufficient room for posterior migration of the spinal cord, although gaining different canal expansion.

Background. Recent innovations in dynamic devices have promised a reduction in stress shielding, protection of adjacent segment degeneration, and decreased implant failure. However, there have been few studies comparing the biomechanical properties of a rigid device in comparison to a dynamic posterior fixation device. The purpose of this study was to compare the immediate stability of a new dynamic pedicle screw fixation device with an equivalent rigid device. Methods. Six thoracolumbar cadaver spines (T10–L4) were fixed in a biomechanical testing frame. Pure moments of 10 N m were loaded in six directions: flexion, extension, right and left lateral bending, and right and left axial rotation. For each spine, four different stages were tested: intact, destabilization of the middle segment, fixation with the dynamic device, and fixation with the rigid device. Ranges of motion were measured using stereophotogrammetry. The specimens with each device were then subjected to flexion–compression loading for five cycles on a MTS 858 Universal Testing Machine. The average stiffness of the last three cycles was recorded. Findings. Both dynamic and rigid devices were found to provide stability for the injured segment in flexion–extension and lateral bending. In axial rotation, the devices could restore the stability to levels similar to those in an intact spine. Results also indicated a slight increase in range of motion in flexion–extension and significant reduction in stiffness of flexion–compression with the dynamic device (P Interpretation. The dynamic device offers a system that may alter favorably the movement and load transmission of a spinal motion segment without sacrificing construct stability.

Anterior occiput-to-axis screw fixation is more suitable than a posterior approach for some patients with a history of posterior surgery. The complex osseous anatomy between the occiput and the axis causes a high risk of injury to neurological and vascular structures, and it is important to have an accurate screw trajectory to guide anterior occiput-to-axis screw fixation. Thirty computed tomography (CT) scans of upper cervical spines were obtained for three-dimensional (3D) reconstruction. Cylinders (1.75 mm radius) were drawn to simulate the trajectory of an anterior occiput-to-axis screw. The imitation screw was adjusted to 4 different angles and measured, as were the values of the maximized anteroposterior width and the left-right width of the occiput (C0) to the C1 and C1 to C2 joints. Then, the 3D models were printed, and an angle guide device was used to introduce the screws into the 3D models referring to the angles calculated from the 3D images. We found the screw angle ranged from α1 (left: 4.99 ± 4.59°; right: 4.28 ± 5.45°) to α2 (left: 20.22 ± 3.61°; right: 19.63 ± 4.94°); on the lateral view, the screw angle ranged from β1 (left: 13.13 ± 4.93°; right: 11.82 ± 5.64°) to β2 (left: 34.86 ± 6.00°; right: 35.01 ± 5.77°). No statistically significant difference was found between the data of the left and right sides. On the 3D printed models, all of the anterior occiput-to-axis screws were successfully introduced, and none of them penetrated outside of the cortex; the mean α4 was 12.00 ± 4.11 (left) and 12.25 ± 4.05 (right), and the mean β4 was 23.44 ± 4.21 (left) and 22.75 ± 4.41 (right). No significant difference was found between α4 and β4 on the 3D printed models and α3 and β3 calculated from the 3D digital images of the left and right sides. Aided with the angle guide device, we could achieve an optimal screw trajectory for anterior occiput-to-axis screw fixation on 3D printed C0 to C2 models.

It is still debate of the relationship between the dietary protein consumption and risk of fracture. We searched Medline and Embase to assess the effects of dietary protein consumption on risk of fracture. Twelve prospective cohort studies with 407,104 participants were included, higher total protein consumption may be decrease 11% risk of hip fractures, with adj. RR of 0.89 (0.82, 0.97), no significant difference was found for total protein and risk of all fractures and limb fracture; for animal protein consumption and risk of all fractures and hip fracture, with adj.RR of 0.79 (032, 1.96) and 1.04 (0.70, 1.54); for vegetable protein consumption and risk of all fractures, hip fracture and limb fractures with adj.RR of 0.77 (0.52, 1.12), 1.00 (0.53, 1.91) and 0.94 (0.40, 2.22), the subgroup of vegetable protein consumption and risk of all fractures of postmenopausal women with adj.RR of 0.78(0.52,1.16). Dose-response meta-analysis the relationship of total/animal/vegetable protein and hip fracture was consistent to the results of forest plot, the line of total protein and hip fracture was below the Y = 1.0 line. This meta-analysis showed that total dietary protein consumption may be decrease the risk of hip fracture, but not for animal or vegetable protein.

ObjectivesThis study presents the successful posterior surgical reduction and fusion on a 26-month-old child with chronic unilateral locked facet joint and spinal cord injury (SCI).MethodsA 26-month-old child with chronic unilateral locked facet joint and SCI treated by posterior surgical reduction and fusion. Plaster external fixation was applied and rehabilitation exercise was trained post-operatively.ResultsChronic unilateral locked facet joint was reduced successfully and bone fusion of C4/5 was achieved 3 months after surgery. The function of both lower limbs was improved 1 year after surgery, aided with physical rehabilitation.ConclusionUnilateral locked facet joint in pediatric population is rare. Few clinical experiences were found in the literature. Non-surgical treatment has advantages of not being invasive and is preferred for acute patients; however, it may not be suitable for chronic unilateral locked facet joint with SCI, in which surgical intervention is needed.

Background context Surgical stabilization is recommended for odontoid fractures with mechanical instability. Compared with C1–C2 fusion, percutaneous anterior odontoid screw fixation has the advantages of preserving C1/C2 motion and being a minimally invasive procedure. However, determining the optimal screw trajectory is often difficult. When an initial suboptimal K-wire hole is drilled, it is especially difficult to drill a second optimal K-wire trajectory because the initial hole will be entered inadvertently. Purpose To design a novel device, two-hole guide tube, to make drilling a second optimal K-wire trajectory easier, and thus, avoid unnecessary additional surgical time and reduce the likelihood of needing to change the procedure to traditional open surgery. Study design A technical report. Methods Fifty-three patients with odontoid fractures were treated by percutaneous anterior odontoid screw fixation in our hospital, and the initial K-wire trajectories of 16 cases (12 men and 4 women) among the 53 patients were imperfect. The two-hole guide tube was applied for drilling the second trajectory in each of these 16 cases. Results No complications associated with this technique occurred. Satisfactory results and good screw placement was achieved in all patients. Radiographic fusion was confirmed for 15 of 16 patients. None of the patients experienced clinical symptoms or screw loosening or breakage in this study. Conclusions Our novel device, two-hole guide tube, can be used to reduce the difficulty associated with redrilling an optimal K-wire trajectory if the initial trajectory is imperfect during percutaneous anterior odontoid screw fixation. Moreover, by referring to the initial misplaced K-wire, a more accurate trajectory for the second K-wire can be achieved.

Osteoporotic fracture is a significant cause of morbidity and mortality and is a challenging global health problem. Previous reports of the relation between vitamin A intake or blood retinol and risk of fracture were inconsistent. We searched Medline and Embase to assess the effects of vitamin A (or retinol or beta-carotene but not vitamin A metabolites) on risk of hip and total fracture. Only prospective studies were included. We pooled data with a random effects meta-analysis with adjusted relative risk (adj.RR) and 95% confidence interval (CI). We used Q statistic and I(2) statistic to assess heterogeneity and Egger's test to assess publication bias. Eight vitamin A (or retinol or beta-carotene) intake studies (283,930 participants) and four blood retinol level prospective studies (8725 participants) were included. High intake of vitamin A and retinol were shown to increase risk of hip fracture (adj.RR [95% CI] = 1.29 [1.07, 1.57] and 1.40 [1.03, 1.91], respectively), whereas beta-carotene intake was not found to increase the risk of hip fracture (adj.RR [95% CI] = 0.82 [0.59, 1.14]). Both high or low level of blood retinol was shown to increase the risk of hip fracture (adj.RR [95% CI] = 1.87 [1.31, 2.65] and 1.56 [1.09, 2.22], respectively). The risk of total fracture does not differ significantly by level of vitamin A (or retinol) intake or by blood retinol level. Dose-response meta-analysis shows a U-shaped relationship between serum retinol level and hip fracture risk. Our meta-analysis suggests that blood retinol level is a double-edged sword for risk of hip fracture. To avoid the risk of hip fracture caused by too low or too high a level of retinol concentration, we suggest that intake of beta-carotene (a provitamin A), which should be converted to retinol in blood, may be better than intake of retinol from meat, which is directly absorbed into blood after intake.

BACKGROUND: Anterior odontoid screw fixation (AOSF) has been one of the most popular treatments for odontoid fractures. However, the true efficacy of AOSF remains unclear. In this study, we aimed to provide the pooled rates of non-union, reoperation, infection, and approach related complications after AOSF for odontoid fractures. METHODS: We searched studies that discussed complications after AOSF for type II or type III odontoid fractures. A proportion meta-analysis was done and potential sources of heterogeneity were explored by meta-regression analysis. RESULTS: Of 972 references initially identified, 63 were eligible for inclusion. 54 studies provided data regarding non-union. The pooled non-union rate was 10% (95% CI: 7%-3%). 48 citations provided re-operation information with a pooled proportion of 5% (95% CI: 3%-7%). Infection was described in 20 studies with an overall rate of 0.2% (95% CI: 0%-1.2%). The main approach related complication is postoperative dysphagia with a pooled rate of 10% (95% CI: 4%-17%). Proportions for the other approach related complications such as postoperative hoarseness (1.2%, 95% CI: 0%-3.7%), esophageal/retropharyngeal injury (0%, 95% CI: 0%-1.1%), wound hematomas (0.2%, 95% CI: 0%-1.8%), and spinal cord injury (0%, 95% CI: 0%-0.2%) were very low. Significant heterogeneities were detected when we combined the rates of non-union, re-operation, and dysphagia. Multivariate meta-regression analysis showed that old age was significantly predictive of non-union. Subgroup comparisons showed significant higher non-union rates in age ≥ 70 than that in age ≤ 40 and in age 40 to

We sought to evaluate the motor-sensory specificity of the motor and primary sensory neurons after the end-to-side neurorrhaphy. We divided 90 rats into three groups: (1) end-to-side neurorrhaphy using the ulnar nerve as donor nerve and the musculocutaneous nerve as recipient nerve; (2) normal control; and (3) transected nerve with the stumps buried. At 5 months, we monitored the grooming test, the electromyographic recordings, the histologic changes in the nerve, and quantitatively evaluated motoneurons and dorsal root ganglion (DRG) neurons following their retrograde labeling by Fluoro-Gold (Sigma, St. Louis, MO) applied to the musculocutaneous nerve and its biceps brachii branch. Grooming and electrophysiological investigations recovered successfully in the end-to-side group. The implanted musculocutaneous nerve contained varying but satisfactory numbers of axons. In the end-to-side group, the proportion of motoneurons for the biceps brachii branch of musculocutaneous nerve was very similar to the musculocutaneous nerve sections proximal to this branch (17.3% ± 2.7% and 21.7% ± 3.7%, respectively), but it did not correspond with the proportion of the biceps brachii branch of musculocutaneous nerve in the normal group (28.3% ± 3.5%). The present study confirms that limited but functional reinnervation can occur after the end-to-side neurorrhaphy, and the motor-sensory specificity is not important.

To compare clinical efficacy between discectomy and discectomy plus Coflex fixation for lumbar disc herniation.From December 2007 to August 2008, 50 patients (31 males and 19 females) were treated by surgery of discectomy and discectomy plus Coflex fixation. The average age was 52.5 years (range, 30 - 72 years). There were 24 cases in the group of discectomy plus Coflex fixation and 26 cases in the group of discectomy. Preoperative and postoperative visual analogue scales (VAS), Japanese Orthopadic Association (JOA) and Oswestry disability index (ODI) were recorded, as well as radiological index. And use a paired t-test and one-way analysis of variance (one-way ANOVA) statistical method to evaluate the Coflex dynamic stabilization system in value in the treatment of lumbar disc herniation.Both groups received significant improvement of JOA, ODI and VAS (t = -33.2 - 64.5, P0.01), but the group of discectomy was found with deterioration of ODI at last follow-up, 12 months after surgery 6.7 ± 1.5 to 10.2 ± 2.3 (t = -19.3, P0.05). The group of discectomy plus Coflex fixation was found with significant increase of height of dorsal intervertebral discs (HD), distance across the two adjacent spinous processes (DS), distance of intervertebral foramina (DIF) and spinal canal area(SA) (t = -34.4 - 4.5, P0.05). In contrast, the group of discectomy was found with significant decrease of HD, DS, DIF and SA (t = 3.4 - 52.8, P0.05). Coflex fixed group in HD, DIF, DS significant difference with simple discectomy group, with a statistically significant (F = 14.1 - 25.6, P0.05).Both discectomy and discectomy plus Coflex fixation are apparently effective when treating lumbar disc herniation. Coflex can significantly increase the HD and DIF when used for lumbar disc herniation, and it has positive influence for keeping height of lumbar vertebral space and treating the nerve root symptom of lumbar disc herniation. Discectomy plus Coflex is better than pure discectomy in preventing lumbar degeneration.

To establish reference data on the dimensions of C2 lamina to guide the use of translaminar screws with Wright’s technique and a modified technique for pediatric patients in different age groups. 113 pediatric patients were divided into six age groups, and their cervical vertebrae were studied on CT scans. Laminar height, width, length and screw angle were measured. Statistical analysis was performed using Student t tests, Pearson’s correlation and linear regression analysis. Mean laminar height was 10.95 ± 2.81 mm, and mean width was 6.01 ± 0.90 mm. For Wright’s technique, mean laminar length was 30.65 ± 3 mm, and the screw angle was 56.02° ± 3.62°. For the modified technique, mean laminar length was 22.07 ± 2.38 mm, and the screw angle was 67.40° ± 3.39°. 95.6 % (108/113) of the children could insert a screw into the lamina (laminar width ≥4.5 mm), 72.6 % (82/113) could accept bilateral translaminar screws (laminar width ≥4.5 mm and laminar height ≥9 mm). Our investigation provides insight into the anatomy of C2 lamina in six pediatric age groups. Compared to adults, the benefits of C2 translaminar screws fixation are more obvious in the pediatric spine which has a large C2 lamina. Compared to Wright’s technique, the modified technique should insert a screw with bigger insert angle and shorter screw length.

An intravertebral vacuum cleft (IVC) is not an uncommon finding; it is more likely to occur in patients with osteoporotic vertebral compression fractures (OVCF). There are scarce data on the treatment of these patients with percutaneous balloon kyphoplasty (PKP). Between August 2005 and March 2010, 35 single vertebral fracture patients with an IVC sign were treated by PKP. Visual Analogue Score (VAS), Oswestry Disability Index (ODI), Kyphotic Angulation (KA), and Compression Ratio (CR) improved significantly postoperatively (p0.05). These values were maintained at the one year follow-up. Balloon kyphoplasty leads less often to leakage (here in only 14.3% of the patients) than vertebroplasty (in 75% according to the literature). On the other hand, balloon kyphoplasty seems to predispose to intradiscal leakage: here in 3 out of 5 cases. This may cause a compression fracture of the adjacent vertebra.

Lumbar interspinous devices are intended to unload the facet joints, restore foraminal height, lower intradisk pressure, and provide motion-preserving stabilization. They are an alternative treatment for patients with spinal degeneration and have increased in popularity in recent years. To the authors’ knowledge, heterotopic ossification has not been previously reported around an interspinous device, and this is the first reported case of interspinous fusion after interspinous device placement. A 66-year-old man presented with a 3-year history of low back pain and a 4-month history of radiating pain down his left leg. A diagnosis was made of lumbar spinal stenosis and left disk herniation at L4–L5 after physical and imaging examinations. A dynamic interspinous device was implanted after the decompressive surgery. The patient’s symptoms were relieved postoperatively. Thirty-two months later, he returned with back pain after being in a traffic accident. Lumbar radiographs showed a massive bony formation around the implant. Radiographs and a computed tomography scan 4.5 years later revealed that the implanted device segments were fused. No implant motion was seen on dynamic radiographs. Because the patient was symptom free, no interventions were performed. Heterotopic bone formation around a dynamic interspinous device may hamper motion preservation, and heterotopic ossification is a potential mid- and long-term complication.

Objective The aim of this study was to compare outcomes when the upper and lower thoracic regions were used as the site of proximal instrumentation to treat adult spinal deformity. Methods MEDLINE, Embase and Cochrane library searches were performed to identify studies that compared outcome measures when the upper and lower thoracic vertebrae (UTV and LTV, respectively) were used as the site of proximal instrumentation. The weighted mean difference (WMD) was calculated for continuous outcomes, and the relative risk (RR) was calculated for dichotomous outcomes. Results Seven articles (n=554 patients) met the final inclusion criteria, and we compared the outcome measures of a long fusion extending to the upper and lower thoracic regions. The pooled analysis revealed that extending fixation into the upper thoracic region decreased the risk of proximal junctional kyphosis (PJK) revision surgery (RR: 0.36, 95% CI 0.14 to 0.90, p

Purpose.To investigate a novel computed method to reconstruct the bilateral digital interarticular channel of atlas and its potential use on the anterior upper cervical screw fixation.Methods.We have used the reverse engineering software (image-processing software and computer-aided design software) to create the approximate and optimal digital interarticular channel of atlas for 60 participants. Angles of channels, diameters of inscribed circles, long and short axes of ellipses were measured and recorded, and gender-specific analysis was also performed.Results.The channels provided sufficient space for one or two screws, and the parameters of channels are described. While the channels of females were smaller than that of males, no significant difference of angles between males and females were observed.Conclusion.Our study demonstrates the radiological features of approximate digital interarticular channels, optimal digital interarticular channels of atlas, and provides the reference trajectory of anterior transarticular screws and anterior occiput-to-axis screws. Additionally, we provide a protocol that can help make a pre-operative plan for accurate placement of anterior transarticular screws and anterior occiput-to-axis screws.

Background:Surgical treatments for adult spinal deformities often include pelvic fixation, and the feasibility of sacral-2 alar iliac (S2AI) screw fixation has been shown previously. However, sometimes S2AI screw fixation cannot be applied due to the presence of an osteolytic lesion or trauma or because the biomechanical properties of only an S2AI screw is insufficient. Therefore, we questioned the feasibility of using sacral AI screws in other segments and determined whether S3AI and S4AI screws have the potential to be used for sacral fractures. The aim of this study was to investigate the feasibility and radiological features of sacral AI fixation in S1–S4 in an adult population using 3D imaging techniques.Methods:Computed tomography (CT) scans were taken of 45 patients and were imported into Mimics (Version 10.01, Materialise, Belgium) software to reconstruct the 3D digital images. Next, a cylinder (radius of 3.5 mm) was drawn to imitate the screw trajectory of a S1–4 AI screw, and every imitated screw in each segment was adjusted to a maximum upward and downward angle to acquire the feasible region. The parameters of the S1–4AI screw trajectories were measured.Results:Sacral AI screws could be successfully imitated using 3D digital imaging. The S4AI screw trajectory could be obtained in 19 of 45 patient images (42.2%), while the feasibility rates of S1AI, S2AI, and S3AI screw fixation were 100%, 100%, and 91.1% (41/45), respectively. The feasible regions of S1AI, S2AI, and S3AI screw trajectories were wide enough, while the adjustable angle of S4AI screws was very small.Conclusion:It is feasible to place S1–2AI screws in the entire adult population and S3–4AI screws in some of the adult population. Furthermore, our study suggested that 3D digital images are suitable to study the feasibility of new screw fixation.

To study indications and complications of interspinous process device Coflex for degenerative disk diseases.One hundred and eight patients with degenerative lumbar disc diseases were underwent procedures of surgical decompression and additional fixation of Coflex between November 2007 and October 2010. Sixty-eight patients were male and the other fourty were female, and their average age was 53.5 years (range from 37 to 75 years). Fifty-nine patients were underwent surgery of excision of nucleus pulposus and Coflex fixation, 41 patients were underwent surgery of decompression by fenestration and Coflex fixation, 6 patients were underwent surgery of topping-off, and 2 patients were underwent surgery of Coflex fixation for two level. Preoperative and postoperative visual analogue scales (VAS) and Oswestry disability index (ODI) were recorded, as well as height of ventral intervertebral space (HV), height of dorsal intervertebral space (HD), height of intervertebral foramen (HIF) and segmental range of motion (ROM). One-way ANOVA was used for statistical analysis. Surgical complications were also recorded.The average follow-up time was 28.8 months. All groups had apparent improvement of VAS and ODI, and maintained well to last follow-up (F = 6.16-25.92, P = 0.00). Statistical analysis showed that HD and HIF increased significantly in group with excision of nucleus pulposus and Coflex fixation and group with decompression by fenestration and Coflex fixation (F = 7.37 - 11.68, P0.05). Although both HD and HIF decreased one-year after surgery, they were still higher than those preoperatively (F = 6.31 and 7.05, P = 0.00). Preoperative segmental ROM was respectively 6.3° ± 1.8° and 6.2° ± 1.7° in group with excision of nucleus pulposus and Coflex fixation and group with decompression by fenestration and Coflex fixation, and 3.1° ± 0.6° and 3.0° ± 0.8° at last follow-up. Three cases were found with device-related complications and five with non-device-related complications, and all five cased were cured after appropriate treatment.Surgical method assisted with Coflex has significant clinical efficacy for degenerative disc disease, it can maintain segmental stability, simultaneously, partly reserve movement. It's key to strictly master indications and precisely choose patients.

Background context Three endoscopic anterior approaches, the transnasal, transoral, and transcervical approaches, are used for ventral lesions of the craniovertebral junction and have been compared regarding surgical working distances and approach angles. However, how the position of the cervical spine influences the depths of surgical corridors and approach angles for the three approaches has not been evaluated. Purpose To evaluate the depths of surgical corridors and the approach angles for the three endoscopic approaches, taking the influence of cervical spine position into account. Study design A radiographic study comparing three anterior endoscopic approaches to the craniovertebral junction. Patient sample Cervical extension and flexion radiographs for 34 patients and cross-sectional computed tomography scans for 30 additional patients were assessed. Outcome measures The depths of the surgical corridors and the approach angles for the three endoscopic approaches in the midsagittal planes. Methods We determined the mean angles of the surgical trajectories for the endoscopic transoral and transcervical approaches on cervical extension and flexion radiographs. In addition, we measured the depths of the surgical corridors and the approach angles for the three approaches in the midsagittal plane. Results The average depths of surgical corridors were as follows: endonasal, 93.65 mm; transoral, 85.27 mm; transcervical, 62.97 mm (in extension). The average approach angles were as follows: endonasal, 31.22°; transoral, 30.87°; transcervical, 36.58° (in extension). Conclusions The position of the cervical spine does not influence the surgical convenience of the endoscopic transnasal approach, but it can influence the endoscopic transoral and transcervical approaches, especially the latter. The endoscopic transcervical approach offers several advantages over the endoscopic transoral and endonasal approaches.

To study incidence and radiological features of intravertebral cleft (IVC) in patients with chronic pain due to osteoporotic vertebral compression fractures (OVCFs), and analyze influence of IVC for surgery of percutaneous kyphoplasty (PKP).Seventy-six patients with osteoporotic vertebral compression fractures and pain duration more than one month were underwent procedures of PKP between August 2005 and August 2010. The incidence and radiological features of IVC were analyzed. Sixty-one patients with single-level OVCFs were divided into two groups with and without IVC. Preoperative and postoperative kyphotic angle and relative anterior vertebral height were recorded, as well as visual analogue scales (VAS) and Oswestry disability index (ODI). Cement patterns of opacification and leakage were also recorded.Thirty two patients with 39 vertebrates were found with IVC sign. The diagnostic sensitivity of X ray, CT and MRI for IVC was respectively 33.3%, 85.7% and 84.6%. Two groups with IVC and without IVC both had apparent correction of kyphotic angle and reduction of anterior height at 3 days after surgery and last follow-up (F = 21.82 - 72.18, P0.01). There was no statistical significance between two groups (P0.05). In addition, both groups had significant improvement as regard to VAS and ODI (F = 131.06 - 364.12, P0.01). Solid pattern accounted for 72.0% of all cemented vertebrates in the group with IVC and 19.4% in the group without IVC. Four cement leakage were found in the group with IVC and another four in the group without IVC.There is a high incidence of IVC in patients with chronic pain due to osteoporotic vertebral compression fractures. CT and MRI are sensitive for detection of IVC. The procedure of PKP is effective for both groups with and without IVC. IVC produces an apparent influence on cement opacification and leakage location during the procedure of PKP.

To investigate curative effects of elastic stable intramedullary nails in the treatment of stable and unstable fractures of femoral shaft in children and to guide its clinical application.From January 2008 to October 2010,44 children with femoral shaft fractures were treated,including 24 boys and 20 girls,ranging in age from 5 to 12 years, with an average of 7.4 years. Based on the fractures stable or not, the patients were divided into stable fractures group(group S) and unstable fractures group (group U). All the children received the same operation to fix broken femoral with elastic stable intramedullary nails and some children received traction or small splint protection after operation when reduction and fixation were considered unsatisfied or his/her weight beyond 30 kg. During the followed-up, the healing time, irritation of the soft tissue (ache, cyst, t al), malunion (angulation above 5 degree in X-ray), limb shortening or lengthening and excellent and good rate were observed.All the patients were followed up,and the duration ranged from 5 to 19 months, with an average of 13 months. All the fractures were healed at the latest follow-up. The average healing time was 10.2 weeks (ranges, 8 to 14 weeks). The incidence rate of malunion was 23.8% in group U and the average angulation was 9 degree (6 to 12 degree), which was higher than those of patients in the group S (0%). The average healing time, limb shortening or lengthening, irritation of the soft tissue and the excellent and good rate between two groups had no significance differences, which were (10.6 +/- 1.3) vs. (9.9 +/- 1.2) weeks, 0 vs. 3 cases, 3 vs. 1 case and 2 vs. 4 cases respectively. In the group U, among 5 patients had malunion, 4 patients were not treated with traction or small splint protection,and the incidence was higher than those who were given traction or small splint protection.Both the stable and unstable femoral shaft fractures in children treated with elastic stable intramedullary nails can receive well short-term curative effects. If given certain postoperative protection like as traction or small splint, the malunion incidence can be reduced.

To access the efficacy of posterior short-segment fixation for single level thoracolumbar burst fractures without spinal injury using CYL-pedicle screw.From September 2007 to December 2009, 74 cases who underwent posterior short-segment fixation for single level thoracolumbar burst fractures (Denis burst fracture type A, B, C) without spinal injury were analyzed retrospectively. There were 53 male and 21 female, mean age was (39 ± 15) years. Neither of them treated with direct decompression, grafting or fusion. Changes in the anterior vertebral height ratio, vertebral wedge angle, Cobb angle, regional angle were measured preoperatively, postoperatively, before implant removal, and at final follow-up to find the statistic difference. Pain status and work status were evaluated using Denis criterion. The incidence of incision infection, screw breakage, iatrogenic spinal injury were recorded as well.The time of follow-up was (20 ± 11) months, no significant change was noted in anterior vertebral height ratio and vertebral wedge angle (P0.05). A significant loss was noted in Cobb angle and regional angle, which were 9.8° ± 5.1° and 9.1° ± 4.8° respectively (t = 2.48 and 3.41, P0.05). Comparing with the patients with Cobb angle20°, the patients with Cobb angle ≤ 20° had better pain scale rate (χ(2) = 4.16, P = 0.04) and work scale rate (χ(2) = 24.34, P0.01). There were incision infection in 1 case, screw breakage in 1, screw loose in 1, and no iatrogenic spinal injury.CYL-pedicle screw could be successfully used in posterior short-segment fixation for single level thoracolumbar burst fractures without spinal injury based on radiographic and clinic outcomes.

This study describes a percutaneous technique for C2 transpedicular screw fixation and evaluates its safety and efficacy in the treatment of patients with hangman's fracture.Ten patients with hangman's fracture were treated by percutaneous C2 transpedicular screw fixation. There are six males and four females, who were, based on the classification of Levine and Edwards, sorted as follows: type I fracture, three cases; type II, five cases; type IIa, two cases. The causes of injury were road traffic accident in six patients and falling injury in four patients. Other associated lesions included rib fractures (7 patients), head injuries (4 patients), and fractures of extremities (6 patients).The new technique was performed successfully in all cases. The average operation time was 98 min (range 60-130 min) and the estimated blood loss was 25 ml (range 15-40 ml). No complications such as vascular or neural structures injuries were found intraoperatively. Postoperative CT scans demonstrated that 17 (85 %) of 20 screws were placed satisfactorily, and 3 (15 %) screws showed perforations of the pedicle wall (2 mm). These patients were asymptomatic and no further intervention was required postoperatively. After 8-25 months follow-up (mean 15.3 months), solid fusion was demonstrated by computed tomography. All cases got well-sagittal alignment and no angulation or dislocation was found at the segment of C2-C3. There was no loss of fixation. Clinical examination showed a full range of motion in the neck in all patients.The fluoroscopically assisted percutaneous C2 transpedicular screw fixation method is a technically feasible and minimally invasive technique for hangman's fracture.

To study the therapeutic method and effect of minimally invasive surgery for the thoracolumbar fractures.A retrospective review of the minimally invasive surgically treatment thoracolumbar fractures from February 2005 to June 2010 was performed. There were 183 cases, 126 males and 57 females, aged 18 to 68 years, average 38.9 years. The involved levels of fractures were T(11) in 22, T(12) in 61, L(1) in 71, L(2) in 29. According to Gertzbein classification, 145 cases were type A fractures, 34 cases were type B fractures, 4 cases were type C fractures; According to Load-sharing score, 51 cases were 4 scores, 56 cases were 5 scores, 17 cases were 6 scores, 12 cases were 7 scores, 24 cases were 8 scores, 23 cases were 9 scores. Different surgical methods were selected according to the minimally invasive surgical strategy, 22 patients were treated with the minimally invasive percutaneous pedicle screws osteosynthesis (MIPPSO group), 102 patients were treated with the small-incision pedicle screws osteosynthesis (SISPSO group), 31 patients were treated with the small incision anterior thoracolumbar surgery (SIATS group) assisted by thoracoscope or headlight, and 28 patients were treated with the 270° decompression and reconstruction surgery (270° DRS group) via a posterior small incision. Preoperative and postoperative neurological status, the correction and loss of Cobb's angle, the decompression scope of spinal canal, the location and union of bone graft were followed up and reviewed.All of 183 cases had successful surgery and were followed up. In the MIPPSO group, operative time was 52 - 100 min, blood loss was 35 - 55 ml. In the the SISPSO group, operative time was 48-68 min, the blood loss was 45 - 65 ml the correction of Cobb's angle in the two groups was 8° - 19°. In the SIATS group, operative time was 140 - 220 min, the blood loss was 160 - 1500 ml the correction of Cobb's angle was 15° - 25°, 1 case had pleural effusion, 1 had lateral femoral cutaneous nerve damage, the complications disappeared after treatment. In the 270° DRS group the operative time was 160-280 min, the blood loss was 700 - 4700 ml, the correction of Cobb's angle was 15° - 28°. The spinal canal mass was removed, the spinal canal was enlarged and completely decompressed. Neurological status improved in all of the preoperative incomplete paraplegia patients except 1 case whose neurological symptoms aggravated.It is satisfactory that the minimally invasive surgical strategy was rational used in the treatment of thoracolumbar fractures.

Summary Introduction Patients with combined C1-2 fractures were often treated by posterior arthrodesis. However, elderly patients with multiple injuries (such as brain injury), the large surgical trauma of posterior arthrodesis will increase the risk of perioperative mortality. A minimally invasive technique may be better for them, and decrease the risk of perioperative mortality. Materials and methods Seven patients with combined C1-2 fractures underwent percutaneous anterior odontoid screw and anterior C1-2 transarticular screws (percutaneous triple anterior screws fixation). The surgical technique of percutaneous triple anterior screws fixation is described. Results The operation performed on all patients successfully without technical difficulties, and no intra-operative surgery-related complications such as vertebral artery, nerve injury and soft tissue complications occurred. No pullout, loosening, or breakage of internal screws was observed. C1/2 stable was found in all cases and radiographic union achieved in all odontoid fractures. Conclusion Using the appropriate instruments allied to intra-operative image-intensification, we suggest that percutaneous triple anterior screw fixation is reliable, effective and minimally invasive procedure for elderly and brain injured patients suffering of combined atlas–axis fractures. Level of evidence Level IV. Retrospective study.

To study the anatomic parameters related to clival screw and establish reference data concerning the craniovertebral fixation technique.Morphometric measurement of the clivus and the surrounding anatomic structures were obtained on 41 dry bone specimens. Then, 2-D CT reconstruction of the craniovertebral region of 30 patients (19 men and 11 women, ranging in age from 20-64 years with an average age of 38.8 years) were performed to measure the safety range for a 3.5-mm screw placement. Nine entry points were evaluated. Finally, one male fresh cadaver specimen (age 46 years) was dissected to observe the craniovertebral region.The clivus faces the basilar artery, the V ~ XII cranial nerves, the pons, and ventral medulla oblongata at its intracranial surface. The longitudinal diameter of extracranial clivus was 25.87 ± 2.64 mm. The narrowest diameter of the clivus was 12.84 ± 1.08 mm, the distance between the left and right hypoglossal canal was 32.70 ± 2.09 mm at its widest part. The distance between the left and right structures, the maximum value was 49.31 ± 4.16 mm at carotid canal, the minimum value was 16.54 ± 2.04 mm at the occipital condyle. The measurement of clival screws placement simulation via 2-D CT reconstruction images shows the maximum upper insertion angle of three components the optimal entry points, the candidate points, the limit entry points was 130.19°, 125.23° and 85.72°, and the total mean screw length was 7.57, 10.13 and 15.6 mm at the vertical entry angle, respectively.Clival screw placement is a viable option for craniovertebral fixation. There is a safe scope for the screw length and angle of the screw placement. And, these parameters obtained in the present study will be helpful for anyone contemplating the use of clival screw fixation.

To report a new index (the SC-line) and a new classification for predicting of postoperative spinal cord decompression after cervical laminoplasty.From March 2008 to August 2009, MRI images of 25 patients treated with cervical laminoplasty were retrospectively studied. Using T2-weighted images of the cervical spine, point A was anterior point of the spinal cord at inferior endplate level of cranial compressed vertebra. Point B was anterior point of the spinal cord at superior endplate level of caudal compressed vertebra. The SC-line was defined as a line that connects A and B. Posterior surface of compressor at compression level did not exceed the line in Type I, connected the line in Type II, and exceeded it in Type III. Twenty-five patients who underwent cervical laminoplasty were classified into 3 groups according to the SC-line classification. The posterior shift of the spinal cord after the posterior decompression procedure was evaluated by using a modified gradation of degree of anterior spinal cord compression by MRI finding. The relationship between the degree of anterior spinal cord compression after surgery and the SC-line types were analyzed.Preoperative cervical SC-line classification showed high correlations to the degree of spinal cord decompression. There were 3.82 ± 0.39 points in Type I before surgery, 3.90 ± 0.32 points in Type II, and 4.00 ± 0.00 points in Type III, respectively. After surgery, there were 1.15 ± 0.50 points in Type I, 2.70 ± 0.48 points in Type II, and 3.50 ± 0.55 points in Type III, respectively. Significant differences were found between each Type (F = 42.49, P0.01; Type I vs. Type II: P0.01; Type I vs. Type III: P0.01; Type II vs. Type III: P = 0.038).SC-line can be used to predict the degree of postoperative spinal cord decompression following cervical laminoplasty.

To explore the short-term effectiveness and the cause of the early complications of lumbar disc herniation with Coflex system in order to provide evidence for the prevention.From November 2007 to August 2008, 37 patients (20 males and 17 females) were treated with Coflex system. The age was from 33 to 70 years with an average of 52 years and the history was from 6 to 50 months with an average of 16.5 years. Complications were observed and the short-term effectiveness was evaluated by scores of JOA and ODI before and after operation.All patients were followed up from 1 to 2 years with an average 20 months. The JOA score increased from 9.09 +/- 1.10 preoperatively to 25.40 +/- 1.20 in the last follow-up. ODI decreased from 24.70 +/- 4.80 preoperatively to 4.80 +/- 1.00 in the last follow-up. The VAS score decreased from 7.86 +/- 0.80 preoperatively to 3.20 +/- 0.50 in the last follow-up. The symptoms remarkably improved. Complications occurred in 4 pa-tients (10.8%), among them, persistent low back pain was in 1 case and conservative treatment did not work; opposite lower limb pain was in 1 case at the 3rd week after operation and symptomatic treatment was effective; displacement of Coflex was in 1 case and Coflex breakage happened in 1 case at the 6th month after operation, but both did not have related clinical symptom.Coflex can obtain good clinical outcomes in treating lumbar disc herniation, but it has special complications. The indications and manipulations should be chosen properly.