Search

Dimethyl sulfide (DMS) influences climate via cloud condensation nuclei (CCN) formation resulting from its oxidation products (mainly methanesulfonic acid, MSA, and sulfuric acid, H2SO4). Despite their importance, accurate prediction of MSA and H2SO4from DMS oxidation remains challenging. With comprehensive experiments carried out in the Cosmics Leaving Outdoor Droplets (CLOUD) chamber at CERN, we show that decreasing the temperature from +25 to -10 °C enhances the gas-phase MSA production by an order of magnitude from OH-initiated DMS oxidation, while H2SO4production is modestly affected. This leads to a gas-phase H2SO4-to-MSA ratio (H2SO4/MSA) smaller than one at low temperatures, consistent with field observations in polar regions. With an updated DMS oxidation mechanism, we find that methanesulfinic acid, CH3S(O)OH, MSIA, forms large amounts of MSA. Overall, our results reveal that MSA yields are a factor of 2-10 higher than those predicted by the widely used Master Chemical Mechanism (MCMv3.3.1), and the NOxeffect is less significant than that of temperature. Our updated mechanism explains the high MSA production rates observed in field observations, especially at low temperatures, thus, substantiating the greater importance of MSA in the natural sulfur cycle and natural CCN formation. Our mechanism will improve the interpretation of present-day and historical gas-phase H2SO4/MSA measurements. publishedVersion

Atmospheric simulation chambers continue to be indispensable tools for research in the atmospheric sciences. Insights from chamber studies are integrated into atmospheric chemical transport models, which are used for science-informed policy decisions. However, a centralized data management and access infrastructure for their scientific products had not been available in the United States and many parts of the world. ICARUS (Integrated Chamber Atmospheric data Repository for Unified Science) is an open access, searchable, web-based infrastructure for storing, sharing, discovering, and utilizing atmospheric chamber data [https://icarus.ucdavis.edu]. ICARUS has two parts: a data intake portal and a search and discovery portal. Data in ICARUS are curated, uniform, interactive, indexed on popular search engines, mirrored by other repositories, version-tracked, vocabulary-controlled, and citable. ICARUS hosts both legacy data and new data in compliance with open access data mandates. Targeted data discovery is available based on key experimental parameters, including organic reactants and mixtures that are managed using the PubChem chemical database, oxidant information, nitrogen oxide (NOx) content, alkylperoxy radical (RO₂) fate, seed particle information, environmental conditions, and reaction categories. A discipline-specific repository such as ICARUS with high amounts of metadata works to support the evaluation and revision of atmospheric model mechanisms, intercomparison of data and models, and the development of new model frameworks that can have more predictive power in the current and future atmosphere. The open accessibility and interactive nature of ICARUS data may also be useful for teaching, data mining, and training machine learning models.

Intense new particle formation events are regularly observed under highly polluted conditions, despite the high loss rates of nucleated clusters. Higher than expected cluster survival probability implies either ineffective scavenging by pre-existing particles or missing growth mechanisms. Here we present experiments performed in the CLOUD chamber at CERN showing particle formation from a mixture of anthropogenic vapours, under condensation sinks typical of haze conditions, up to 0.1 s$^{-1}$ . We find that new particle formation rates substantially decrease at higher concentrations of pre-existing particles, demonstrating experimentally for the first time that molecular clusters are efficiently scavenged by larger sized particles. Additionally, we demonstrate that in the presence of supersaturated gas-phase nitric acid (HNO$_3$) and ammonia (NH$_3$), freshly nucleated particles can grow extremely rapidly, maintaining a high particle number concentration, even in the presence of a high condensation sink. Such high growth rates may explain the high survival probability of freshly formed particles under haze conditions. We identify under what typical urban conditions HNO$_3$ and NH$_3$ can be expected to contribute to particle survival during haze.

Recent advances in our knowledge of the gas-phase oxidation of isoprene, the impact of chamber walls on secondary organic aerosol (SOA) mass yields, and aerosol measurement analysis techniques warrant reevaluating SOA yields from isoprene. In particular, SOA from isoprene oxidation under high-NOx conditions forms via two major pathways: (1) low-volatility nitrates and dinitrates (LV pathway) and (2) hydroxymethyl-methyl-α-lactone (HMML) reaction on a surface or the condensed phase of particles to form 2-methyl glyceric acid and its oligomers (2MGA pathway). These SOA production pathways respond differently to reaction conditions. Past chamber experiments generated SOA with varying contributions from these two unique pathways, leading to results that are difficult to interpret. This study examines the SOA yields from these two pathways independently, which improves the interpretation of previous results and provides further understanding of the relevance of chamber SOA yields to the atmosphere and regional or global modeling. Results suggest that low-volatility nitrates and dinitrates produce significantly more aerosol than previously thought; the experimentally measured SOA mass yield from the LV pathway is ∼0.15. Sufficient seed surface area at the start of the reaction is needed to limit the effects of vapor wall losses of low-volatility compounds and accurately measure the complete SOA mass yield. Under dry conditions, substantial amounts of SOA are formed from HMML ring-opening reactions with inorganic ions and HMML organic oligomerization processes. However, the lactone organic oligomerization reactions are suppressed under more atmospherically relevant humidity levels, where hydration of the lactone is more competitive. This limits the SOA formation potential from the 2MGA pathway to HMML ring-opening reactions with water or inorganic ions under typical atmospheric conditions. The isoprene SOA mass yield from the LV pathway measured in this work is significantly higher than previous studies have reported, suggesting that low-volatility compounds such as organic nitrates and dinitrates may contribute to isoprene SOA under high-NOx conditions significantly more than previously thought and thus deserve continued study.

The coupling reactions of amines into imines oxidized by persulfate with the assistance of ultrasound were carried out. The reaction conditions were optimized and the effect of ultrasonic was also investigated. The results indicated that Na2S2O8 in combination with ultrasound possessed excellent oxidative performance, which made this transformation smoothly proceed under the conditions of solvent-/catalyst- free, and low reaction temperature, giving excellent yields of imines in short reaction time. Our procedure had high reaction tolerance to various primary benzylic amines, demonstrating good universality. Furthermore, a tentative reaction mechanism and pathway were proposed.

The contribution of particle charge to the rate of particle wall deposition has been a persistent source of uncertainty for experiments performed in environmental chambers. By tracking the preferen...

Detailed characterization of the aerosol content of wildfire smoke plumes is typically performed through in situ aircraft observations, which have limited temporal and spatial coverage. Extending such observations to regional or global scales requires new remote sensing approaches, such as retrievals that make use of spectropolarimetric, multiangle imaging. In this work measurements made during the Imaging Polarimetric Assessment and Characterization of Tropospheric Particulate Matter (ImPACT‐PM) field campaign in a smoke plume near the town of Lebec in Southern California by the Navy Center for Interdisciplinary Remotely Piloted Aircraft Studies Twin Otter aircraft on 8 July 2016 are used in conjunction with near‐coincident measurements from the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI) on the National Aeronautics and Space Administration ER‐2 high‐altitude research aircraft to assess the sensitivity of spectropolarimetric measurements to the black carbon content of the plume. Tracking visible features in the smoke through the sequence of AirMSPI observations allowed the height of the plume to be estimated through geometric techniques. Then, by constraining the fractional amounts of the aerosol constituents with the in situ data, radiative closure was obtained through simulations performed with a polarimetric radiative transfer code, demonstrating the ability to constrain the black carbon mass fraction to approximately 5%, given the uncertainties in the AirMSPI measurements and the assumption of external mixing of aerosol components. The AirMSPI retrieval, made using a limited set of observations from the 470 nm polarimetric spectral band alone, was also generally consistent with operational retrievals of aerosol optical depth and surface reflectance made by the Multi‐Angle Implementation of Atmospheric Correction algorithm at 1 km resolution.

Highly-oxygenated organic molecules (HOMs) contribute substantially to the formation and growth of atmospheric aerosol particles, which affect air quality, human health and Earth's climate. HOMs are formed by rapid, gas-phase autoxidation of volatile organic compounds (VOCs) such as α-pinene, the most abundant monoterpene in the atmosphere. Due to their abundance and low volatility, HOMs can play an important role for new-particle formation (NPF) and the early growth of atmospheric aerosols, even without any further assistance of other low-volatility compounds such as sulfuric acid. Both the autoxidation reaction forming HOMs and their new-particle formation rates are expected to be strongly dependent on temperature. However, experimental data on both effects are limited. Dedicated experiments were performed at the CLOUD (Cosmics Leaving OUtdoor Droplets) chamber at CERN to address this question. In this study, we show that a decrease in temperature (from +25 to −50 °C) results in a reduced HOM yield and reduced oxidation state of the products, whereas the new-particle formation rates (J1.7 nm) increase substantially. Measurements with two different chemical ionization mass spectrometers (using nitrate and protonated water as reagent ion, respectively) provide the molecular composition of the gaseous oxidation products and a 2-dimensional volatility basis set model (2D-VBS) provides their volatility distribution. The HOM yield decreases with temperature from 6.2 % at 25 °C to 0.7 % at −50 °C. However, there is a strong reduction of the saturation vapor pressure of each oxidation state as the temperature is reduced. Overall, the reduction in volatility with temperature leads to an increase in the nucleation rates by up to three orders of magnitude at −50 °C compared with 25 °C. In addition, the enhancement of the nucleation rates by ions decreases with decreasing temperature, since the neutral molecular clusters have increased stability against evaporation. The resulting data quantify how the interplay between the temperature-dependent oxidation pathways and the associated vapor pressures affect biogenic new-particle formation at the molecular level. Our measurements therefore improve our understanding of pure biogenic new-particle formation for a wide range of tropospheric temperatures and precursor concentrations.

In the present-day atmosphere, sulfuric acid is the most important vapour for aerosol particle formation and initial growth. However, the growth rates of nanoparticles (

The tolerance of sulfur poisoning of α-Mo2C(0001) surfaces with different Pt coverages is investigated combining the density functional theory (DFT) results with thermodynamics data using the ab initio atomistic thermodynamic method. It is found that on Mo2C(0001), Pt clusters tend to form two dimensional planar structures instead of aggregating. The clean Mo2C(0001) surface interacts with sulfides very strongly and is susceptible to sulfur poisoning. With increasing the coverage of Pt on the Mo2C surface, the interaction between sulfur and substrate is weakened. The sulfur tolerance ability increases in the order of Mo2C ≈ Pt1/Mo2C < Pt4/Mo2C < Pt8/Mo2C, where the coverage of Pt on the Mo2C plays a very effective role. The results provide theoretical guidance for designing Mo2C based catalysts with high activity and high sulfur resistance.

Analysis of scanning electrical mobility spectrometer (SEMS) or SMPS data requires coupling the scanning differential mobility analyzer (DMA) transfer function with the response functions for the instrument plumbing and the detector. In the limit of plug flow (uniform velocity) within the DMA, the scanning DMA transfer function has the same form as that for constant voltage. Most SEMS/SMPS data analysis uses this model, though previous studies have shown that boundary layers distort the transfer function during scanning DMA measurements. Part I determined the instantaneous transfer function during scanning of the TSI Model 3081 A long column DMA by modeling the flows, fields, and particle trajectories within the actual DMA geometry. This study (Part II) combines that transfer function with empirical data on the efficiencies and delay time distributions of the plumbing and detector of the SEMS/SMPS to determine the instantaneous rate at which particles are counted, and integrates the count rate over the finite counting time interval to obtain the integrated SEMS/SMPS response function. Simulations using this geometrical model are compared with those obtained using traditional, idealized DMA models for scan rates ranging from slow (240 s) to very fast (10 s), and with measurements of monodisperse calibration aerosols. Data inversion studies show that both increasing and decreasing voltage scans can be used to determine the particle size distribution, even with fast scans. Copyright © 2018 American Association for Aerosol Research

The tolerance of sulfur poisoning of α-Mo