Search

The evaluation of the mechanical properties and the state of a powder bed are essential for industrial powder operations. We assume that the bed incipient yield is approximately the bed incipient fluidization, and the particle contact force, the bed voidage, the bed tensile stress and the bed-wall frictional stress can be determined by simple pressure drop monitoring when gradually increasing the superficial gas velocity from zero. A two-dimensional powder bed voidage-tensile stress state diagram at zero shear stress under anisotropic consolidation is initially prepared. For the sample powder bed, we show that the isotropic tensile stress estimated by the powder yield locus extrapolation, 340 Pa−770 Pa, from a shear tester is different from the anisotropic tensile stress evaluated, 120 Pa–180 Pa, by the pressure drop overshoot approximation.

Fine cornstarch powders are wet granulated in a lab-scale high shear granulator. The torque required for maintaining the impeller passing through the bed with a constant rotating speed is monitored during the continuous binder addition granulation process. A new method is proposed to identify 6 stages during the granulation process based on the fraction of the positive impeller torque changing rate in a characteristic period of time. The morphologies and the behavior of the bed are found intrinsically different in the identified 6 stages. The influence of the impeller blade inclined angle on the impeller torque in each stage is initially reported. The impeller with planner 45° blades requires higher torques in Stages I and II due to the overall powder bed mass loading. The impeller with steeper 60° blades requires higher torques in Stages III and IV due to the higher collision frequencies between the blade and granules. The suitable granulation liquid binder to solid powder mass ratio can be readily identified in Stages II and III, and its range is found to increase with the increasing of the impeller rotational speed and is independent to the blade inclined angle.

Azathioprine is a purine analog (PA) used to treat myasthenia gravis (MG). However, some patients are sensitive to azathioprine and develop severe side effects, such as leukopenia, alopecia, and diarrhea soon after using the medication. Pharmacogenetics plays a crucial role in such intolerance.A 16-year-old woman with MG developed hair loss, pancytopenia, bloody diarrhea, and fever shortly after azathioprine treatment.Pharmacogenetic analysis revealed compound heterozygosity of the nudix hydrolase 15 (NUDT15) gene, which led to suppressed NUDT15 function. Colonoscopy revealed large ulcers with polypoid lesions in the terminal ileum, cecum, ascending colon, and rectum. These are the characteristics of inflammatory bowel disease (IBD).Sanger sequencing of NUDT15 gene and colonoscopy for bloody stool evaluation.The patient recovered completely from this acute episode after discontinuation of azathioprine treatment. Her hemogram turned back to normal range. There was also no blood in stool during follow-up.Pharmacogenetic effects should be considered when prescribing PA medication. The possibility of secondary or concomitant autoimmune diseases must always be considered in patients with MG.

BACKGROUND The genetic background of patients with hemoglobin (Hb) H disease in Taiwan has been investigated; however, the clinical features and treatment outcomes were not reported. OBJECTIVE To analyze the clinical features and genotypes of patients with HbH who reside in Taiwan. METHODS We conducted a retrospective analysis of the clinical and molecular characteristics of 38 patients with HbH disease who were undergoing treatment at Kaohsiung Medical University Hospital, Taiwan. RESULTS Initial Hb levels were lower and the numbers of patients requiring iron-chelation therapy were higher in the nondeletional HbH group than in the deletional HbH group (P

A novel method is proposed to evaluate the interparticle forces and particle-wall interactions based on the pressure drop measurements at incipient fluidization. In the first experiment, we used the liquid bridge force as the model interparticle force of the glass ballotini (53 μm–105 μm). The theoretical relationship between the model liquid bridge force and the liquid addition volume was successfully presented. In the second part of experiment, the interparticle forces and the particle-wall interaction of cornstarch powders in a Perspex cylinder are determined. While the particle-wall interaction shows a linear relationship with the apparent bed-wall contact area, the interparticle force follows a logarithm relation with the bed mass for the Warren-Spring-type cornstarch powders. The results were also compared to the cohesion values obtained by a conventional shear tester. The results conclude that our method serves as an economically and accurate alternative to conventional shear testers.

Relatively high concentration toluene is photocatalytically degraded in a multi-stage fluidized bed reactor continuously. The fluidizing media are titanium dioxide deposited silica gel particles, which are prepared by the doping sol-gel method. The effects of the Ti/Si atomic ratio, the inlet gas flow rates, and the number of the stages on the toluene removal efficiency were evaluated. The highest toluene removal efficiency is obtained when the fluidizing media are with the Ti/Si atomic ratio of 1.25. The apparent reaction orders are 0.4-0.5 for the single-stage system and 0.7 for the two-stage system, respectively. With an inlet toluene concentration of 1,000 ppm, a relative humidity of 30% and a volumetric flow rate of 10 L/min, the removal efficiency of toluene at the steady state is as high as 80% and is maintained in the 6-hr experimental time.

Autoimmune cytopenia (AIHA, AITP or AIN) were uncommon paraneoplastic manifestations of HL and have been recognized in patients after HSCT with dismal outcome. We presented a case of 16-yr-old male with Hodgkin's lymphoma who developed severe AIC involving all three cell lineages after autologus bone marrow transplantation. No disease relapse was noted. Treatments with steroid, IVIG and immunosuppresants were in vain and the disease course was complicated with sepsis and deep vein thrombosis. Rituximab was administered along with broad-spectrum antibiotics and low-molecular weight heparin. The condition became stable and pancytopenia recovered after four doses of rituximab treatment. Severe multi-lineage AIC post HSCT is usually refractory to first-line treatment and difficult to manage. Second-line treatment, such as rituximab, and dedicated care for pancytopenia-induced or treatment-related complications may provide a better outcome.

Thin films of p-type β-CuSCN were deposited on indium–tin oxide glass substrates via electrochemical process. Various annealing temperatures (200, 300 and 400 °C) were taken into consideration. The influence of annealing temperature on structural, optical, electrical and photoelectrochemical characteristics of β-CuSCN thin films were investigated. Results from X-ray diffraction indicated as-obtained β-CuSCN thin film was in a hexagonal close pack crystal structure. We found that the crystallographic orientation changed and the optical energy band gap slightly increased with increasing annealing temperatures. These properties made CuSCN films annealed at 400 °C a better photoelectrochemical performance with photocurrent density of about −0.39 mA/cm2 at −0.5 V vs. SCE. This value is about 5 times higher than the as-deposited CuSCN film. Observed higher photocurrent density is likely due to the intrinsic of a higher charge carrier concentration, and a lower resistance within CuSCN crystal and at CuSCN/electrolyte interface.

Background/Aims Hepatitis C virus (HCV) prevails in patients with thalassemia. We aimed to investigate the efficacy, safety, and impact on red blood cells (RBC) transfusion demand of pegylated interferon (Peg-IFN)/ribavirin therapy in thalassemic patients with HCV. Methods This retrospective study included 18 thalassemic patients (16 with HCV-1b, one HCV-1b/2b, and one HCV-2b) and 54 consecutive sex- and genotype-matched controls. Patients with HCV-2, or HCV-1 or mixed HCV-1/2 with lower viral loads plus rapid virological response (RVR) received 24-week Peg-IFN/ribavirin; whereas HCV-1 or mixed HCV-1/2 with higher viral loads or without RVR received 48-week regimens. Results The rates of RVR, complete early virological response, and sustained virological response (SVR) in thalassemic patients were 72.2% (13/18), 94.1% (16/17), and 77.8% (14/18), which resembled those of controls (63.0%, 94.4%, and 81.5%, respectively). RVR was the only significant factor associated with SVR in thalassemic group, and was the strongest predictor for SVR among both groups (OR/95% CI = 14.7/2.20–98.6), followed by male gender and lower viral loads. More proportion of interleukin-28B-TT carriage were observed among thalassemic patients with SVR versus non-SVR (78.6% vs. 50.0%). Thalassemic patients experienced significantly less 80/80/80 adherence, more ribavirin reduction and serious adverse events than controls. Notably, there was a decreased post-treatment RBC transfusion demand versus baseline in thalassemic patients with SVR (5.21 vs. 5.64 units/month, p = 0.05), but not in those without SVR (6.33 vs. 6.56 units/month, p = 0.54). Conclusion Peg-IFN/ribavirin was effective and tolerable for thalassemic HCV patients. Successful antiviral therapy might have extra benefit of reducing the post-treatment transfusion demand.

A random rayburst sampling (RRBS) framework was developed to detect the nucleus and cell membrane boundaries in three-dimensional (3-D) space. Raw images were acquired through a full-field optical coherence tomography system with submicron resolution—i.e., 0.8 ?? ? m in lateral and 0.9 ?? ? m in axial directions. The near-isometric resolution enables 3-D segmentation of a nucleus and cell membrane for determining the volumetric nuclear-to-cytoplasmic (N/C) ratio of a single cell. The RRBS framework was insensitive to the selection of seeds and image pixel noise. The robustness of the RRBS framework was verified through the convergence of the N/C ratio searching algorithm. The relative standard deviation of the N/C ratio between different randomly selected seed sets was only 2%. This technique is useful for various in vitro assays on single-cell analyses.

Facial reconstruction is a branch of forensic anthropology used to assist in the identification of skeletal remains. The majority of facial reconstruction techniques use facial soft tissue depth chart data to recreate facial tissue on a skull or a model of a skull through the use of modeling clay. This study relied on 193 subjects selected from the Taiwanese population on the basis of age and gender to determine the average values of 32 landmarks, include midline and bilateral measures, by means of CT scans. The mean age of the subjects was 46.9±16.4 years, with a mean age of 43.8±16.6 for males and 49.9±15.8 for females respectively. There were 16 landmarks with statistically significant differences between male and female subjects, namely S, G, N, Na, Ph, Sd and Id in the midline portion, FE, LO, ZA and Sub M2 in the bilateral-right and left portion, and IM point in the bilateral-left portion (abbreviations adapted from Karen T. Taylor's work). The mean soft tissue depth was greater in males than in females, and there was significant difference between the right and left sides of the face in Za point. This study's findings were compared with those of Bulut et al.

Stress fracture of the diaphysis of the ulna is rare and only 6 cases were found in a literature review. We present a further case occurring in a weightlifter.