Search

α,α-Difluoromethyl ketones (DFMKs) have emerged as currently investigated agents benefiting from the merging of chemico-physical features conferred by the constitutive elements (-CHFsub2/suband carbonyl moietites). With a view to biological applications, the additional incorporation of heterocycles is a desirable property enabling the tuning of critical factors encompassing the pharmaco-dynamic and kinetic profiles. The underexplored assembling of α,α-difluoromethyl-heteroaromatic ketones is herein implementedivia/ia conceptually intuitive Weinreb amide acylative transfer of a putative difluoromethyl-carbanion. To make the strategy productive, we adopted the commercially available TMSCHFsub2/subpronucleophile - characterized by robust chemical stability and manipulability (bp 65 °C) - which upon Lewis-base mediated activation delivers the competent CHFsub2/sub-nucleophile. The synthetic protocol was carried out on pyrazole- and isoxazole-based scaffolds, and a panel of heteroaryl-DFMKs was consequently developed as potential COX-inhibitors. In this sense, the bioisosterism deducted through docking studies between the widely expressed carboxylic group (in several clinically used COX inhibitors) and the -COCHFsub2/submotif introduced herein supports this rationale. To confirm the docking results, all compounds were tested against both COX-1 and COX-2 enzyme isoforms showing activity in the micromolar range and a good selectivity index (SI). They were also evaluated for their biocompatibility using NIH/3T3 cells to which they did not show any significant toxicity.

The necessity of more sustainable conditions that follow the twelve principles of Green Chemistry have pushed researchers to the development of novel reagents, catalysts and solvents for greener asymmetric methodologies. Solvents are in general a fundamental part for developing organic processes, as well as for the separation and purification of the reaction products. By this reason, in the last years, the application of the so-called green solvents has emerged as a useful alternative to the classical organic solvents. These solvents must present some properties, such as a low vapor pressure and toxicity, high boiling point and biodegradability, and must be obtained from renewable sources. In the present revision, the recent application of these biobased solvents in the synthesis of optically active compounds employing different catalytic methodologies, including biocatalysis, organocatalysis and metal catalysis, will be analyzed to provide a novel tool for carrying out more ecofriendly organic processes.

Tyrosinase (EC 1.14.18.1) is implicated in melanin production in various organisms. There is a growing body of evidence suggesting that the overproduction of melanin might be related to several skin pigmentation disorders as well as neurodegenerative processes in Parkinson’s disease. Based on this consideration, the development of tyrosinase inhibitors represents a new challenge to identify new agents in pharmaceutical and cosmetic applications. With the goal of identifying tyrosinase inhibitors from a synthetic source, we employed a cheap and facile preliminary assay using tyrosinase from Agaricus bisporus (AbTYR). We have previously demonstrated that the 4-fluorobenzyl moiety might be effective in interactions with the catalytic site of AbTYR; moreover, the additional chlorine atom exerted beneficial effects in enhancing inhibitory activity. Therefore, we planned the synthesis of new small compounds in which we incorporated the 3-chloro-4-fluorophenyl fragment into distinct chemotypes that revealed the ability to establish profitable contact with the AbTYR catalytic site. Our results confirmed that the presence of this fragment is an important structural feature to improve the AbTYR inhibition in these new chemotypes as well. Furthermore, docking analysis supported the best activity of the selected studied compounds, possessing higher potency when compared with reference compounds.

The commercially available and experimentally convenient (bp 65 °C) difluoromethyltrimethylsilane (TMSCHF

The selective formal insertion (homologation) of a carbon unit bridging the two trifluoroacetamidoyl chlorides (TFAICs) units is reported. The tactic is levered on a highly chemoselective homologation-metalation-acyl nucleophilic substitution sequence which precisely enables to assemble novel trifluoromethylated β-diketiminates within a single synthetic operation. Unlike previous homologations conducted with LiCH2Cl furnishing aziridines, herein we exploit the unique capability of iodomethyllithium to act contemporaneously as a C1 source (homologating effect) and metalating agent. The mechanistic rationale grounded on experimental evidences supports the hypothesized proposal and, the structural analysis gathers key aspects of this class of valuable ligands in catalysis.

Homologation strategies provide highly versatile tools in organic synthesis for the introduction of a CH2 group into a given carbon skeleton. The operation can result in diverse structural motifs by tuning of the reaction conditions and the nature of the homologating agent. In this Account, concisely contextualizing our work with lithium carbenoids (LiCH2X, LiCHXY etc) for homologating carbon-centered electrophiles, we focus on the assembly of three-membered cycles featuring fluorinated substituents. Two illustrative case studies are considered: (1) the development and employment of fluorinated carbenoids en route to rare α-fluoroepoxides and aziridines, and (2) the installation of up to halomethylenic groups on trifluoroimidoylacetyl chlorides (TFAICs) for preparing CF3-containing halo- and halomethylaziridines. Collectively, we demonstrate that the initial homologation event generated by the installation of the carbenoid, upon modulation of the conditions, serves as a tool for creating fluorinated building blocks in a single operation.

The commercially available fluoroiodomethane represents a valuable and effective electrophilic source for transferring the CH2F unit to a series of heteroatom-centered nucleophiles under mild basic conditions. The excellent manipulability offered by its liquid physical state (bp 53.4 °C) enables practical and straightforward one-step nucleophilic substitutions to retain the chiral information embodied, thus allowing it to overcome de facto the requirement for fluoromethylating agents with no immediate access. The high-yielding methodology was successfully applied to a variety of nucleophiles including a series of drugs currently in the market.

A formal CH2 -CH2 homologation conducted with C1 carbenoids on a carbon electrophile for the obtainment of a four-membered cycle is reported. The logic proposes the consecutive delivery of two single nucleophilic CH2 units to an isothiocyanate-as competent electrophilic partner-resulting in the assembling of a rare imino-thietane cluster. The single synthetic operation procedure documents genuine chemocontrol, as indicated by the tolerance to various reactive elements decorating the starting materials. Significantly, the double homologation protocol is accomplished directly on a carbon electrophile, thus not requiring the installation of heteroatom-centered manifolds (e.g. boron).

An efficient Pd(II)-catalyzed cascade approach was established for the synthesis of 9-chloro-1H-benzo[b]furo[3,4-e]azepin-1-ones starting from N-propargyl arylamines having a pendant α,β-unsaturate...

A palladium catalyzed cascade process involving syn-chloropalladation, intramolecular olefin insertion, and oxidative C-Cl bond formation reactions was demonstrated for the synthesis of dichlorinated tetrahydroquinolines in high yields (up to 93%). The N-propargyl arylamines having a tethered α,β-unsaturated carbonyl moiety underwent a regioselective syn-chloropalladation followed by a Heck-type reaction to deliver the tetrahydroquinoline scaffold. The rare insertion of the second chlorine atom was rationalized comprising a Pd

Thioformamides are easily prepared - under full chemocontrol - through the partial reduction of isothiocyanates with the in situ generated Schwartz reagent. The high electrophilicity of the starting materials enables the straightforward addition of the hydride ion, thus constituting a reliable and high-yielding method for obtaining variously functionalized thioformamides. Sensitive chemical groups to the reduction conditions such as nitro, ester, alkene, azo, azide and keto groups do not interfere with the chemoselectivity of the process. Moreover, the stereochemical information embodied in the starting material is fully retained in the final products. The synthetic potential of the selected thioformamide template is also briefly discussed.

The intrinsic degradative α-elimination of Li carbenoids somehow complicates their use in synthesis as C1-synthons. Nevertheless, we herein report how boosting such an α-elimination is a straightforward strategy for accomplishing controlled ring-opening of epoxides to furnish the corresponding β-halohydrins. Crucial for the development of the method is the use of the eco-friendly solvent 2-MeTHF, which forces the degradation of the incipient monohalolithium, due to the very limited stabilizing effect of this solvent on the chemical integrity of the carbenoid. With this approach, high yields of the targeted compounds are consistently obtained under very high regiocontrol and, despite the basic nature of the reagents, no racemization of enantiopure materials is observed.

The sequential installation of a carbenoid and a hydride into a carbonyl, furnishing halomethyl alkyl derivatives, is reported. Despite the employment of carbenoids as nucleophiles in reactions with carbon-centered electrophiles, sp3-type alkyl halides remain elusive materials for selective one-carbon homologations. Our tactic levers on using carbonyls as starting materials and enables uniformly high yields and chemocontrol. The tactic is flexible and is not limited to carbenoids. Also, diverse carbanion-like species can act as nucleophiles, thus making it of general applicability.

The structure and properties of amides are of tremendous interest in organic synthesis and biochemistry. Traditional amides are planar and the carbonyl group non-electrophilic due to n

The selective formal insertion (homologation) of a carbon unit bridging the two trifluoroacetamidoyl chlorides (TFAICs) units is reported. The tactic is levered on a highly chemoselective homologation-metalation-acyl nucleophilic substitution sequence which precisely enables to assemble novel trifluoromethylated β-diketiminates within a single synthetic operation. Unlike previous homologations conducted with LiCH

Dialkyl 5,5'-dioxo-4,4'-bipyrazole-4,4'-dicarboxylates are readily obtained by the reaction of 5-hydroxypyrazole-4-carboxylates in refluxing thionyl chloride. The obtained diesters can be transformed into the corresponding 4,4'-bipyrazoles via alkaline hydrolysis and subsequent decarboxylation. Detailed NMR spectroscopic investigations (1H, 13C, 15N) were undertaken with all products prepared. Moreover, the structure of a representative 5,5'-dioxo-4,4'-bipyrazole-4,4'-dicarboxylate was confirmed by X-ray crystal structure analysis.

An effective stereocontrolled synthesis of the HIV protease inhibitor Nelfinavir is reported. Two transformations were identified crucial for achieving success: the formation of a densely functionalized α-chloroketone via the homologation of a Weinreb amide with chloromethyllithium (LiCH2Cl), followed by its erythro selective reduction into the corresponding chiral chlorohydrin. A commercially available enzyme P2-C02 was particularly well suited for this purpose, affording the key alcohol (in an excellent 99% de), which was then smoothly converted into the active biologically active agent.

The first direct and straightforward nucleophilic fluoromethylation of organic compounds is reported. The tactic employs a “fleeting” lithium fluorocarbenoid (LiCH2F) generated from commercially available fluoroiodomethane. Precise reaction conditions were developed for the generation and synthetic exploitation of such a labile species. The versatility of the strategy is showcased in ca. 50 examples involving a plethora of electrophiles. Highly valuable chemicals such as fluoroalcohols, fluoroamines, and fluoromethylated oxygenated heterocycles could be prepared in very good yields through a single synthetic operation. The scalability of the reaction and its application to complex molecular architectures (e.g., steroids) are documented.

The regioselective functionalization of four- and six-membered cyclic sulfones was investigated using a lithiation/electrophile trapping strategy. The protocol features an interesting eco-compatibility profile because of the use of 2-MeTHF as a solvent (more eco-friendly than other organic solvents) and n-hexyllithium as a lithiating agent safer than other alkyllithium compounds. Several derivatives were prepared with different stereochemistry and substitution patterns. A number of selected derivatives, spanning a range of 5 log P units, were characterized for their lipophilicity through RP-HPLC. A good linear correlation, with a slope close to 1.0, was observed between the experimentally determined RP-HPLC lipophilicity parameters (log k'w) and calculated log P (clog P) values, whereas a systematic difference in absolute values between the chromatographic parameters and in silico lipophilicity descriptors can be attributed mainly to silanophilic interactions between the H-bond acceptor SO2 group and free silanol groups on silica-based C18 columns, which results in increased retention times.

In the early 2000s, the Sigma Receptor (SR) family was identified as potential “druggable” target in cancer treatment. Indeed, high density of SRs was found in breast, lung, and prostate cancer cells, supporting the idea that SRs could play a role in tumor growth and progression. Moreover, a link between the degree of SR expression and tumor aggressiveness has been postulated, justified by the presence of SRs in high metastatic-potential cancer cells. As a consequence, considerable efforts have been devoted to the development of small molecules endowed with good affinity towards the two SR subtypes (S1R and S2R) with potential anticancer activity. Herein, we report the synthesis and biological profile of aryl-alkyl(alkenyl)-4-benzylpiperidine derivatives - as novel potential anticancer drugs targeting SR. Among them, 3 (RC-106) exhibited a preclinical profile of antitumor efficacy on a panel of cell lines representative of different cancer types (i.e. Paca3, MDA-MB 231) expressing both SRs, and emerged as a hit compound of a new class of SR modulators potentially useful for the treatment of cancer disease.

The new motif – α,α-difluoromethyl thioamide – has been assembled starting from isothiocyanate (as thioamide precursor) and a formal difluoromethyl-carbanion generated from commercially available TMSCHF2. Upon proper activation of this reagent with potassium tert-amylate, the high-yielding transfer of the difluorinated nucleophile takes place under high chemocontrol. Various sensitive functionalities (e.g. ester, nitrile, nitro, azido groups) can be accommodated across the isothiocyanate core, thus allowing a wide scope. The methodology is highly flexible and adaptable to prepare analogous α,α-difluoromethyl oxoamides by conveniently using isocyanates as the electrophilic building-blocks.

The homologation of Weinreb amides into difluoromethylketones with a formal nucleophilic CHF

Neurodegenerative disorders represent one of the main therapeutic challenges of our time. [...]

An efficient Pd(II)-catalyzed cascade approach was established for the synthesis of 9-chloro-1

An expeditious, high-yielding synthesis of rare α-fluoroepoxides and α-fluoroaziridines through the addition of the unkown fluoroiodomethyllithium (LiCHIF)—formed via deprotonation the commercially available fluoroiodomethane with a lithium amide base—to carbonyl-like compounds is documented. The ring-closure reactions, leading to α-fluorinated three-membered heterocycles, rely on the diversely reactive C–I and C–F bonds. Excellent chemoselectivity was observed in the presence of highly sensitive functionalities—aldehyde, ketone, nitrile, alkene—which remained untouched during the homologation sequence.

The well‐established Hoppe–Beak chemistry, which involves enantioselective generation of organolithium compounds in the presence of (−)‐sparteine, was revisited and applied to unprecedented acylations with Weinreb amides to access highly enantioenriched α‐oxyketones and cyclic α‐aminoketones. Recycling of the sustainable solvent cyclopentyl methyl ether, sparteine, and the released Weinreb “amine” [HNMe(OMe)] was possible through a simple work‐up procedure that enabled full recovery of these precious materials. The methodology features a robust scope and flexibility, thus allowing the enantioselective preparation of scaffolds amenable of further derivatization.

Formylation reactions are fundamental operations in synthetic chemistry allowing the incorporation into a given structure formyl groups amenable to further deiivatization. Conceptually, the introduction of such groups through the reaction between an electrophilic donor and a nucleophilic acceptor (i.e. organometallic reagent) constitutes a reliable technique with widespread applications. In this Highlight, we summarize the effectiveness of the so called Comnins-Meyers amide - [2-(N-methyl-N-formylamino]pyridine - in such a chemistry with vistas to the synthesis of natural products and biologically active substrates.

α-Fluoromethyl selenoethers were prepared through a sequential one-pot diselenide reduction-fluoromethylation with the fluorinated, highly manipulable C1 source ICH2F. The reaction benefited from the employment of the environmentally friendly solvent MeTHF (2-methyltetrahydrofuran) which enabled to maximize the efficiency of both steps of the technique. A series of variously functionalized analogues – featuring a remarkable degree of stability imparted by selenium - could be chemoselectively accessed in high yield and purity through an intuitive and experimentally simple protocol.

The transfer of a α-methyl phenylseleno carbanion to variously functionalized N-aryl and N-sulfonyl imines is reported. The fast selenium-lithium exchange conducted on a diselenoacetal with n-BuLi enables the generation of the attacking homologative nucleophile under chemoselective conditions preserving concomitant potentially sensitive functionalities to the lithiating conditions. Uniformly high yields were observed, thus establishing a valuable and conceptually simple approach to the title compounds.

alpha-Halomethyllithium carbenoids are useful homologating reagents which - reacting under proper reaction conditions as carbanions - enable the installation via nucleophilic addition of a reactive halomethyl fragment onto a preformed carbon-heteroatom bond. The pronounced thermolability represented - since seminal studies by Kobrich - the Achilles' heel of these reagents: the use of Barbier-type methodologies (i.e., the electrophile should be present in the reaction mixture prior to the formation of the carbenoid) was pivotal in order to suppress decomposition through -elimination processes. Nowadays, the use of low temperatures (-78 degrees C) guarantees reliable procedures and, significantly, the employment of microreactor technologies allows external trapping to be performed even at higher temperatures as reported by Luisi. We will discuss the -halomethyllithium-mediated homologations of a series of carbon electrophiles such as carbonyl compounds, imines, esters, Weinreb amides, and isocyanates.

An efficient, chemoselective approach to spiro-epoxyoxindoles via the addition of chloromethyllithium followed by ring-closure of the intermediate alkoxide is reported. Chemoselectivity is fully preserved in the presence of different electrophilic sites. The synthetic potential of selected spiro-epoxyindoles has been exploited in the copper(I)-catalyzed intramolecular oxyarylation of an alkyne and in the formation of N,N-dimethylisoindigo via the addition of dihalocarbenoids.

The addition of carbon (Grignard and organolithium reagents) and hydride nucleophiles (Schwartz reagent) to isocyanates and isothiocyanates constitutes a versatile, direct and high yielding approach to the synthesis of functionalized (thio)amide derivatives including haloamides and formamides. The chemoselective delivery of a nucleophilic (eventually configurationally stable) organometallic species to a given iso(thio)cyanate is the crucial parameter for the success of the strategy. Thus, the influence of the factors governing classical methodologies (e.g. dehydrative condensation) such as steric hindrance and electronic properties of the reactants become practically negligible.

The nucleophilic addition of widely available and variously functionalized organolithium reagents to isothiocyanates represents a straightforward, high-yielding, one-pot method to access secondary thioamides. The simple reaction conditions required and the broad scope (>50 cases examples) makes it a robust and reliable method to access both simple and complex thioamides, including enantiopure ones. Noxious and unpleasant-smelling sulfurating agents, usually employed in the literature established methods, are avoided during the whole synthetic procedure thus, rendering the protocol highly attractive, also for sustainability aspects.

Subunit-selective modulation of γ-aminobutyric acid type A receptors (GABA

A direct, single synthetic homologative transformation of halostannanes into mono- or di-substituted methyl analogues is documented. Critical for the success of the operation is the excellent nucleophilicity of carbenoid-like methyllithium reagents (LiCHXY, X, Y = halogen, OR, and CN): by simply individuating the reagents’ substitution pattern, the desired functionalized fragment is delivered to the electrophile. The wide scope of the protocol is evidenced also in the case of analogous halogermanium compounds. The tandem homologation–quenching with nucleophiles and the use of α-chloroallyllithium is also discussed.

The transfer of a reactive nucleophilic CH2X unit into a preformed bond enables the introduction of a fragment featuring the exact and desired degree of functionalization through a single synthetic operation. The instability of metallated α-organometallic species often poses serious questions regarding the practicability of using this conceptually intuitive and simple approach for forming C–C or C–heteroatom bonds. A deep understanding of processes regulating the formation of these nucleophiles is a precious source of inspiration not only for successfully applying theoretically feasible transformations (i.e. determining how to employ a given reagent), but also for designing new reactions which ultimately lead to the introduction of molecular complexity via short experimental sequences.

Diselenoacetals, previously considered byproducts in homologation tactics en route to α-selenoketones, are herein found to be excellent starting materials for this purpose. The easy selenium/lithium exchange they undergo affords seleno carbanions which are smoothly added to Weinreb amides to chemoselectively prepare α-aryl- and α-alkyl seleno methylketones through a single chemical operation. No racemization events are observed in the presence of optically pure starting materials.

β,γ-Unsaturated aldehydes with all-carbon quaternary or tertiary α-centers were rapidly assembled from ketones through a unique synthetic operation consisting of 1) C1 homologation, 2) Lewis acid mediated epoxide–aldehyde isomerization, and 3) electrophilic trapping. The synthetic equivalence of a vinyl oxirane and a β,γ-unsaturated aldehyde is the key concept of this previously undisclosed tactic. Mechanistic studies and labeling experiments suggest that an aldehyde enolate is a crucial intermediate. The homologating carbenoid formation plays a critical role in determining the chemoselectivity.

Chloromethyllithium carbenoid has been chemoselectively added to cyclic enones (5-, 6- and 7-membered systems, including two natural products) to provide chloromethyl allylic alcohols. Under the optimized reaction conditions neither concomitant (n+1) homologation nor conjugate addition or Simmons–Smith-like cyclopropanation takes place. The presence of LiBr is estimated to play a dual role, namely as a carbenoid stabilizer and mild Lewis acid activator of the CO group. Notably, the mesomeric effect caused by β-heteroatom-containing substituents promotes the attack of the reagent at the most activated position.