Search

SARS-CoV-2 diagnostic practices broadly involve either qPCR based nucleic amplification or lateral flow assays (LFAs). qPCR based techniques suffer from the disadvantage of requiring thermal cycling (difficult to implement for low-cost field use) leading to limitation on sample to answer time, the potential to amplify viral RNA sequences after a person is no longer infectious and being reagent intense. LFA performance is restricted by qualitative or semi-quantitative readouts, limits on sensitivity and poor reproducibility. Electrochemical biosensors, and particularly glucose test strips, present an appealing platform for development of biosensing solutions for SARS-CoV-2 as they can be multiplexed and implemented at very low cost at point of use with high sensitivity and quantitative digital readout. This work reports the successful raising of an Opti-mer sequence for the spike protein of SARS-CoV-2 and then development of an impedimetric biosensor which utilises thin film gold sensors on low-cost laminate substrates from home blood glucose monitoring. Clinically relevant detection levels for SARS-CoV-2 are achieved in a simple, label-free measurement format using sample incubation times of 15 minutes. The biosensor developed here is compatible with mass manufacture, is sensitive and low-cost CE marked readout instruments already exist. These findings pave the way to a low cost and mass manufacturable test with the potential to overcome the limitations associated with current technologies.

Accurate and rapid diagnostic tests are critical to reducing the impact of SARS-CoV-2. This study presents early, but promising measurements of SARS-CoV-2 using the ACE2 enzyme as the recognition element to achieve clinically relevant detection. The test provides a scalable route to sensitive, specific, rapid and low cost mass testing.

Emerging in late 2019, the SARS-CoV-2 virus has had a devastating health and economic effects around the world forcing governments to enact restrictions on day to day life, resulting in severe economic and social disruption. The virus has stimulated new research in the fields of drug development, vaccinology and diagnostic testing. Here we present the basis for a simple, mass manufacturable saliva based electrochemical assay for the SARS-CoV-2 virus acheived through adsorption of the Angiotsnsin Converting Enzyme 2 (ACE2) into thiolated amphiphobic prefluoro monolayer assemled on a gold sensor surface. Following sensor preparation, it is possible to measure specific binding of recombinant spike protein and discriminate positive and negative samples of inactivated SARS-CoV-2 following 30 minutes incubation under ambient conditions. Representative calculations of limits of detection are made for recombinant spike protein (1.68 ng/ml) and inactivated virus (37.8 dC/mL). The assay as presented ultimately shows discrimination between positive and negative inactivated SARS-CoV-2 samples originating from clinical molecular standards kit intended for clinical and biomedical assay validation, and which is designed to mimic clinical samples through presence of cells and proteins in the sample medium. The simple design of the label free measurement and the selection of reagents involved means the assay has clear potential for transfer onto mass producible units such as screen-printed electrodes similar to glucose-format test strips, to enable widespread, low cost and rapid testing for SARS-CoV-2 in the general population

For analytical applications involving label-free biosensors and multiple measurements, i.e., across an electrode array, it is essential to develop complete sensor systems capable of functionalization and of producing highly consistent responses. To achieve this, a multi-microelectrode device bearing twenty-four equivalent 50micro;m diameter Pt disc microelectrodes was designed in an integrated 3-electrode system configuration and then fabricated. Cyclic voltammetry and electrochemical impedance spectroscopy were used for initial electrochemical characterization of the individual working electrodes. These confirmed the expected consistency of performance with a high degree of measurement reproducibility for each microelectrode across the array. With the aim of assessing the potential for production of an enhanced multi-electrode sensor for biomedical use, the working electrodes were then functionalized with 6-mercapto-1-hexanol (MCH). This is a well-known and commonly employed surface modification process, which involves the same principles of thiol attachment chemistry and self-assembled monolayer (SAM) formation commonly employed in the functionalization of electrodes and the formation of biosensors. Following this SAM formation, the reproducibility of the observed electrochemical signal between electrodes was seen to decrease markedly, compromising the ability to achieve consistent analytical measurements from the sensor array following this relatively simple and well-established surface modification. To successfully and consistently functionalize the sensors, it was necessary to dilute the constituent molecules by a factor of ten thousand to support adequate SAM formation on microelectrodes. The use of this multi-electrode device therefore demonstrates in a high throughput manner irreproducibility in the SAM formation process at the higher concentration, even though these electrodes are apparently functionalized simultaneously in the same film formation environment, confirming that the often seen significant electrode-to-electrode variation in label-free SAM biosensing films formed under such conditions is not likely to be due to variation in film deposition conditions, but rather kinetically controlled variation in the SAM layer formation process at these microelectrodes.

What process engineers do is one of the most misunderstood jobs of the engineering profession. Project engineers usually install equipment. Product engineers develop and enhance products for the customer. Maintenance engineers maintain and extend the life and reliability of manufacturing equipment. But what does a process engineer do?