Search

This study provides valuable insights into hydrate management strategies as the industry transitions away from complete hydrate avoidance, particularly for the development of deep-water reservoirs with stricter economic margins. Transient simulation tools, such as the deployed hydrate deposition model, extend our ability to estimate blockage likelihood from heuristics to quantitative predictions. The model is applied to an insulated subsea tieback to identify the optimal no-touch-time (NTT) and depressurization pressure (DPP) following an unplanned shutdown. Two water-production scenarios are considered, from the lowest expected to the highest manageable rates. A complete hydrate blockage is predicted when the NTT was extended several hours beyond the nominal value for the highest water-to-gas ratio (WGR). Complete blockages are predicted for both low and high WGRs when the flowline is only partially depressurized, however, longer cooldown times for the high WGR case (due to greater volumes of residual liquids) meant a blockage took more than twice as long to occur than for the low WGR case. Fully depressurized restarts are both difficult and time consuming, leading to hydrate volume fractions (with respect to the pipe volume) exceeding 30 vol.%. An alternative hydrate management strategy is identified for cases with high volumes of water production, in which the flowline is only partially depressurized once the nominal NTT has elapsed, utilising the increased heat capacity of residual liquids. This reduces the quantity of gas sent to flare and simplifies the restart procedure.