Search

Due to the rapid emergence of multi drug resistant (MDR) pathogens against which current an-tibiotics are no longer functioning, severe infections are becoming practically untreatable. Con-sequently, the discovering of new classes of effective antimicrobial agents with novel modes of action is becoming increasingly urgent. The bioactivity of Cannabis sativa, an herbaceous plant used for millennia for medicinal and recreational purposes, is mainly due to its content in phytocan-nabinoids (PCs). Among the 180 PCs detected, cannabidiol (CBD), Δ8 and Δ9-tetrahydrocannabinols (Δ8-THC and Δ9-THC), cannabichromene (CBC), cannabigerol (CBG), cannabinol (CBN) and some their acidic precursors have demonstrated from moderate to potent antibacterial effects against Gram-positive bacteria (MICs 0.5–8 µg/mL), including methicillin-resistant Staphylococcus aureus (MRSA), epidemic MRSA (EMRSA), as well as fluoroquinolones and tetracycline-resistant strains. Particularly, the not psychotropic CBG was also capable to inhibit MRSA biofilm formation, to eradicate that mature, and to rapidly exterminate MRSA persiters cells. On this scenario, CBG, as well as other minor not psychotropic PCs, such as CBD, and CBC could represent promising compounds for developing novel antibiotics with high therapeutic potential. Anyway, further studies are necessary, needing abundant quantities of such PCs, scarcely provided naturally by Cannabis plants. Here, after an extensive overture on cannabinoids including their reported an-timicrobial effects, aiming at easing the synthetic production of the necessary amounts of CBG, CBC and CBD for further studies, we have, for the first time, systematically reviewed the synthetic pathways utilized for their synthesis, reporting both reaction schemes and experimental details.

The awareness of the existence in plants of bioactive compounds namely phytochemicals (PHYs), having health properties is progressively expanding. Therefore, their massive introduction in the normal diet, in food supplements, and their use as natural therapeutics to treat several diseases are increasingly emphasized by several sectors. Particularly, most PHYs possessing antifungal, antiviral, anti-inflammatory, antibacterial, antiulcer, anti-cholesterol, hypoglycemic, immunomodulatory, and antioxidant properties have been isolated from plants. Additionally, their secondary modification with new functionalities, to further improve their intrinsic beneficial effects, is extensively investigated. Unfortunately, although the idea of exploiting PHYs as therapeutics is amazing, its realization is far from simple, and the possibility of exploiting them as effective orally administrable drugs is almost utopic. Most PHYs are insoluble in water and, when introduced orally, they scarcely reach the site of action in therapeutic concentrations. Degradation by enzymatic and microbial digestion, occurring in the mouth, stomach, and intestine, as well as fast metabolism and rapid excretion via the kidney, biliary, or lung, strongly limit their in vivo activity. To overcome these drawbacks, several nanotechnological approaches have been used and many PHYs-loaded delivery systems with dimensions of nanometers have been developed. This paper, also by reporting various recent case studies, reviews the foremost nano-suspension and nano-emulsion-based techniques developed for formulating the most relevant PHYs in more bioavailable nanoparticles (NPs), suitable or promising for clinical application. Also, the acute and chronic toxic effects due to the exposure to NPs reported so far, the possible nanotoxicity which could derive by their massive employment, as well as the ongoing actions to improve the knowledge in the field were discussed. The state of the art concerning the actual clinical application of both PHYs and the nanotechnologically engineered PHYs was also reviewed.

Multidrug resistance (MDR) among pathogens and the associated infections represent an escalating global public health problem that translates into raised mortality and healthcare costs. MDR bacteria, with both intrinsic abilities to resist antibiotics treatments and capabilities to transmit genetic material coding for further resistance to other bacteria, dramatically decrease the number of available effective antibiotics, especially in nosocomial environments. Moreover, the capability of several bacterial species to form biofilms (BFs) is an added alarming mechanism through which resistance develops. BF, made of bacterial communities organized and incorporated into an extracellular polymeric matrix, self-produced by bacteria, provides protection from the antibiotics’ action, resulting in the antibiotic being ineffective. By adhering to living or abiotic surfaces present both in the environment and in the healthcare setting, BF causes the onset of difficult-to-eradicate infections, since it is difficult to prevent its formation and even more difficult to promote its disintegration. Inspired by natural antimicrobial peptides (NAMPs) acting as membrane disruptors, with a low tendency to develop resistance and demonstrated antibiofilm potentialities, cationic polymers and dendrimers, with similar or even higher potency than NAMPs and with low toxicity, have been developed, some of which have shown in vitro antibiofilm activity. Here, aiming to incite further development of new antibacterial agents capable of inhibiting BF formation and dispersing mature BF, we review all dendrimers developed to this end in the last fifteen years. The extension of the knowledge about these still little-explored materials could be a successful approach to find effective weapons for treating chronic infections and biomaterial-associated infections (BAIs) sustained by BF-producing MDR bacteria.

The pyrazole ring represents a widely applied chemical scaffold in medicinal chemistry research and we have observed that the physicochemical and biological features of highly substituted pyrazoles can be successfully improved by their encapsulation in dendrimer nanoparticles (NPs). For the future development of new optimized antibacterial delivery systems, we report the synthesis and biological evaluation of 5-amino functionalized pyrazole library (compounds 2–7). In detail, new derivatives 2–7 were differently decorated in C3, C4 and C5 positions. An in silico study predicted pyrazoles 2–7 to exert good drug-like and pharmacokinetic properties. Compounds 3c and 4b were endowed with moderate, but nanotechnologically improvable activity against multidrug-resistant (MDR) clinical isolates of Gram-positive species, especially of the Staphylococcus genus (MICs = 32–64 µg/mL). In addition, derivatives 3c and 4a showed moderate activities against Mycobacterium tuberculosis and 4a evidenced activity also against MDR strains. Overall, the collected evidence supported that, upon nano-formulation with proper polymer matrices, the new synthesized compounds could provide new pyrazole-based drug delivery systems with an enhanced and enlarged-spectrum of antibacterial activity.

The dark brown mixture resulting from the autooxidation of catechinic acid (CA) (AOCA) has been reported to possess antiviral activity against Herpes Simplex Virus 1 and 2 (HSV-1 and HSV-2). Unfortunately, the constituents of AOCA were not separated or identified and the compound(s) responsible for AOCA’s antiviral activity remained unknown until recently. Colorless 4-hydroxy benzoic acid (4-HBA) has been reported as the main constituent (75%) of AOCA, and as being responsible for its antiviral activity. The findings seem not to be reliable because of the existence in the literature of very different findings, the high concentration that was attributed to the supposed 4-HBA in the dark mixture, and the insufficient or inaccurately interpreted analytical experiments reported in the study identifying 4-HBA in AOCA. Of particular concern is the lack of AOCA chromatograms highlighting a peak attributable to 4-HBA, using commercial 4-HBA as a standard, and investigations concerning the antiviral activity of marketed 4-HBA. Therefore, in this study, to verify the exactness of the recent reports, we prepared CA from catechin and AOCA from CA, and the absence of 4-HBA in the mixture was first established by thin-layer chromatography (TLC), and then was confirmed by UHPLC–MS/MS, UV–Vis, and ATR–FTIR analyses. For further confirmation, the ATR–FTIR spectral data were processed by principal components analysis (PCA), which unequivocally established strong structural differences between 4-HBA and AOCA. Finally, while the antiviral effects of AOCA against HSV-2 were confirmed, a commercial sample of 4-HBA was completely inactive.

It is widely reported that

In the last few years, antibiotic resistance and, analogously, anticancer drug resistance have increased considerably, becoming one of the main public health problems. For this reason, it is crucial to find therapeutic strategies able to counteract the onset of multi-drug resistance (MDR). In this review, a critical overview of the innovative tools available today to fight MDR is reported. In this direction, the use of membrane-disruptive peptides/peptidomimetics (MDPs), such as antimicrobial peptides (AMPs), has received particular attention, due to their high selectivity and to their limited side effects. Moreover, similarities between bacteria and cancer cells are herein reported and the hypothesis of the possible use of AMPs also in anticancer therapies is discussed. However, it is important to take into account the limitations that could negatively impact clinical application and, in particular, the need for an efficient delivery system. In this regard, the use of nanoparticles (NPs) is proposed as a potential strategy to improve therapy; moreover, among polymeric NPs, cationic ones are emerging as promising tools able to fight the onset of MDR both in bacteria and in cancer cells.

The antimicrobial potency of the pyrazole nucleus is widely reported these days, and pyrazole derivatives represent excellent candidates for meeting the worldwide need for new antimicrobial compounds against multidrug-resistant (MDR) bacteria. Consequently, 3-(4-chlorophenyl)-5-(4-nitrophenylamino)-1H-pyrazole-4-carbonitrile (CR232), recently reported as a weak antiproliferative agent, was considered to this end. To overcome the CR232 water solubility issue and allow for the determination of reliable minimum inhibitory concentration values (MICs), we initially prepared water-soluble and clinically applicable CR232-loaded nanoparticles (CR232-G5K NPs), as previously reported. Here, CR232-G5K NPs have been tested on several clinically isolates of Gram-positive and Gram-negative species, including MDR strains. While for CR232 MICs ≥ 128 µg/mL (376.8 µM) were obtained, very low MICs (0.36–2.89 µM) were observed for CR232-G5K NPs against all of the considered isolates, including colistin-resistant isolates of MDR Pseudomonas aeruginosa and Klebsiella pneumoniae carbapenemases (KPCs)-producing K. pneumoniae (0.72 µM). Additionally, in time–kill experiments, CR232-G5K NPs displayed a rapid bactericidal activity with no significant regrowth after 24 h on all isolates tested, regardless of their difficult-to-treat resistance. Conjecturing a clinical use of CR232-G5K NPs, cytotoxicity experiments on human keratinocytes were performed, determining very favorable selectivity indices. Collectively, due to its physicochemical and biological properties, CR232-G5K NPs could represent a new potent weapon to treat infections sustained by broad spectrum MDR bacteria.

β-lactam antibiotics (BLAs) are crucial molecules among antibacterial drugs, but the increasing emergence of resistance to them, developed by bacteria producing β-lactamase enzymes (BLEs), is becoming one of the major warnings to the global public health. Since only a small number of novel antibiotics are in development, a current clinical approach to limit this phenomenon consists of administering proper combinations of β-lactam antibiotics (BLAs) and β-lactamase inhibitors (BLEsIs). Unfortunately, while few clinically approved BLEsIs are capable of inhibiting most class-A and -C serine β-lactamases (SBLEs) and some carbapenemases of class D, they are unable to inhibit most part of the carbapenem hydrolyzing enzymes of class D and the worrying metallo-β-lactamases (MBLEs) of class B. Particularly, MBLEs are a set of enzymes that catalyzes the hydrolysis of a broad range of BLAs by a zinc-mediated mechanism, and currently no clinically available molecule capable of inhibiting MBLEs exists. Additionally, new types of alarming “superbugs”, were found to produce the New Delhi metallo-β-lactamases (NDMs) encoded by increasing variants of a plasmid-mediated gene capable of rapidly spreading among bacteria of the same species and even among different species. Particularly, NDM-1 possesses a flexible hydrolysis mechanism that inactivates all BLAs, except for aztreonam. The present review provides first an overview of existing BLAs and the most clinically relevant BLEs detected so far. Then, the BLEsIs and their most common associations with BLAs already clinically applied and those still in development are reviewed.

The increasing emergence of bacteria producing β-lactamases enzymes (BLEs), able to inactivate the available β-lactam antibiotics (BLAs), causing the hydrolytic opening of their β-lactam ring, is one of the global major warnings. According to Ambler classification, BLEs are grouped in serine-BLEs (SBLEs) of class A, C, and D, and metal-BLEs (MBLEs) of class B. A current strategy to restore no longer functioning BLAs consists of associating them to β-lactamase enzymes inhibitors (BLEsIs), which, interacting with BLEs, prevent them hydrolyzing to the associated antibiotic. Worryingly, the inhibitors that are clinically approved are very few and inhibit only most of class A and C SBLEs, leaving several class D and all MBLEs of class B untouched. Numerous non-clinically approved new molecules are in development, which have shown broad and ultra-broad spectrum of action, some of them also being active on the New Delhi metal-β-lactamase-1 (NDM-1), which can hydrolyze all available BLAs except for aztreonam. To not duplicate the existing review concerning this topic, we have herein examined BLEsIs by a chemistry approach. To this end, we have reviewed both the long-established synthesis adopted to prepare the old BLEsIs, those proposed to achieve the BLEsIs that are newly approved, and those recently reported to prepare the most relevant molecules yet in development, which have shown high potency, providing for each synthesis the related reaction scheme.

In the original publication [...]

Nitrites are metastable anions that are derived from the oxidation of ammonia by agricultural pollution, sewage, decaying protein, and other nitrogen sources. They are a recognized environmental issue due to their role in eutrophication, as well as in surface and groundwater contamination, being toxic to almost all living creatures. Recently, we reported on the high efficiency of two cationic resins (R1 and R2) forming hydrogels (R1HG and R2HG) by dispersion in water in removing anionic dyes from water by electrostatic binding. Here, aiming at developing adsorbent materials for nitrite remediation, R1, R2, R1HG, and R2HG were first tested in adsorption experiments in batches monitored by UV–Vis methods, using the Griess reagent system (GRS) in order to assess their removal efficiency by contact over time. Particularly, samples of water appositely contaminated with nitrites were analyzed by UV–Vis before and during treatment with the hydrogels. The initial concentration of nitrites was quantified (118 mg/L). Then, the removal of nitrites over time, the removal efficiency of R1HG (89.2%) and of R2HG (89.6%), their maximum adsorption (21.0 mg/g and 23.5 mg/g), as well as the adsorption kinetics and mechanisms were evaluated. Additionally, R1HG- and R2HG-based columns (h = 8–10 cm, ØE = 2 cm) mimicking mini-scale decontamination systems by filtration were used to rapidly filter samples of water polluted with nitrite that were under pressure. R1HG and R2GH were capable of totally removing nitrites (99.5% and 100%) from volumes of nitrite solutions that were 118 mg/L that is 10 times the volumes of resins used. Additionally, when extending filtration to increasing volumes of the same nitrite solution up to 60 times the volume of resins used, the removal efficiently of R1HG decreased, and that of R2HG remained stable at over 89%. Interestingly, both the worn-out hydrogels were regenerable by 1% HCl washing, without a significant reduction in their original efficiency. There is a lack of studies in the literature reporting on novel methods to remove nitrite from water. R1HG and especially R2HG represent low-cost, up-scalable, and regenerable column-packing materials with promise for applications in the treatment of drinking water contaminated by nitrites.

Fenretinide (4-HPR), a retinoid derivative, has shown high antitumor activity, a low toxicological profile, and no induction of resistance. Despite these favorable features, the variability in oral absorption due to its low solubility combined with the high hepatic first pass effect strongly reduce clinical outcomes. To overcome the solubility and dissolution challenges of poorly water-soluble 4-HPR, we prepared a solid dispersion of the drug (4-HPR-P5) using a hydrophilic copolymer (P5) previously synthesized by our team as the solubilizing agent. The molecularly dispersed drug was obtained by antisolvent co-precipitation, an easy and up-scalable technique. A higher drug apparent solubility (1134-fold increase) and a markedly faster dissolution were obtained. In water, the colloidal dispersion showed a mean hydrodynamic diameter of 249 nm and positive zeta potential (+41.3 mV), confirming the suitability of the formulation for intravenous administration. The solid nanoparticles were also characterized by a high drug payload (37%), as was also evidenced by a chemometric-assisted Fourier transform infrared spectroscopy (FTIR) investigation. The 4-HPR-P5 exhibited antiproliferative activity, with IC50 values of 1.25 and 1.93 µM on IMR-32 and SH-SY5Y neuroblastoma cells, respectively. Our data confirmed that the 4-HPR-P5 formulation developed herein was able to increase drug apparent aqueous solubility and provide an extended release over time, thus suggesting that it represents an efficient approach to improve 4-HPR bioavailability.

Water pollution from dyes is harmful to the environment, plants, animals, and humans and is one of the most widespread problems afflicting people throughout the world. Adsorption is a widely used method to remove contaminants derived from the textile industry, food colorants, printing, and cosmetic manufacturing from water. Here, aiming to develop new low-cost and up-scalable adsorbent materials for anionic dye remediation and water decontamination by electrostatic interactions, two cationic resins (R1 and R2) were prepared. In particular, they were obtained by copolymerizing 4-ammonium methyl and ethyl styrene monomers (M1 and M2) with dimethylacrylamide (DMAA), using N-(2-acryloylamino-ethyl)-acrylamide (AAEA) as cross-linker. Once characterized by several analytical techniques, upon their dispersion in an excess of water, R1 and R2 provided the R1- and R2-based hydrogels (namely R1HG and R2HG) with equilibrium degrees of swelling (EDS) of 900% and 1000% and equilibrium water contents (EWC) of 90 and 91%, respectively. By applying Cross’ rheology equation to the data of R1HG and R2HG’s viscosity vs. shear rate, it was established that both hydrogels are shear thinning fluids with pseudoplastic/Bingham plastic behavior depending on share rate. The equivalents of -NH3+ groups, essential for the electrostatic-based absorbent activity, were estimated by the method of Gaur and Gupta on R1 and R2 and by potentiometric titrations on R1HG and R2HG. In absorption experiments in bulk, R1HG and R2HG showed high removal efficiency (97–100%) towards methyl orange (MO) azo dye, fluorescein (F), and their mixture (MOF). Using F or MO solutions (pH = 7.5, room temperature), the maximum absorption was 47.8 mg/g in 90′ (F) and 47.7 mg/g in 120′ (MO) for R1, while that of R2 was 49.0 mg/g in 20′ (F) and 48.5 mg/g in 30′ (MO). Additionally, R1HG and R2HG-based columns, mimicking decontamination systems by filtration, were capable of removing MO, F, and MOF from water with a 100% removal efficiency, in different conditions of use. R1HG and R2HG represent low-cost and up-scalable column packing materials that are promising for application in industrial wastewater treatment.

Ursolic acid (UA), a pentacyclic triterpenoid acid found in many medicinal plants and aromas, is known for its antibacterial effects against multi-drug-resistant (MDR) Gram-positive bacteria, which seriously threaten human health. Unfortunately, UA water-insolubility, low bioavailability, and systemic toxicity limit the possibilities of its application in vivo. Consequently, the beneficial activities of UA observed in vitro lose their potential clinical relevance unless water-soluble, not cytotoxic UA formulations are developed. With a nano-technologic approach, we have recently prepared water-soluble UA-loaded dendrimer nanoparticles (UA-G4K NPs) non-cytotoxic on HeLa cells, with promising physicochemical properties for their clinical applications. In this work, with the aim of developing a new antibacterial agent based on UA, UA-G4K has been tested on different strains of the Enterococcus genus, including marine isolates, toward which UA-G4K has shown minimum inhibitory concentrations (MICs) very low (0.5–4.3 µM), regardless of their resistance to antibiotics. Time-kill experiments, in addition to confirming the previously reported bactericidal activity of UA against E. faecium, also established it for UA-G4K. Furthermore, cytotoxicity experiments on human keratinocytes revealed that nanomanipulation of UA significantly reduced the cytotoxicity of UA, providing UA-G4K NPs with very high LD50 (96.4 µM) and selectivity indices, which were in the range 22.4–192.8, depending on the enterococcal strain tested. Due to its physicochemical and biological properties, UA-G4K could be seriously evaluated as a novel oral-administrable therapeutic option for tackling difficult-to-treat enterococcal infections.

Here, a new two-component hydrogel (CP1OP2-Hgel) was developed, simply by dispersing in water two cationic bactericidal polymers (CP1 and OP2) effective against several multidrug-resistant (MDR) clinical isolates of the most relevant Gram-positive and Gram-negative species. Interestingly, while OP2 acts only as an antibacterial ingredient when in gel, CP1 works as both an antibacterial and a gelling agent. To verify whether it would be worthwhile to use CP1 and OP2 as bioactive ingredients of a new hydrogel supposed for a future treatment of skin infections, dose-dependent cytotoxicity studies with CP1 and OP2 were performed on human fibroblasts for 24 h, before preparing the formulation. Although a significant cytotoxicity at concentrations > 2 µM was evidenced for both polymers, selectivity indices (SIs) over 12 (CP1) and up to six (OP2) were determined, due to the powerful antibacterial properties of the two polymers, thus supporting the rationale for their formulation as a hydrogel. The chemical structure and morphology of CP1OP2-Hgel were investigated by PCA-assisted attenuated total reflectance (ATR) Fourier-transform infrared (FTIR) analysis and scanning electron microscopy (SEM), while its rheological properties were assessed by determining its dynamic viscosity. The cumulative weight loss and swelling percentage curves, the porosity, and the maximum swelling capability of CP1OP2-Hgel were also determined and reported. Overall, due to the potent bactericidal effects of CP1 and OP2 and their favorable selectivity indices against several MDR pathogens, good rheological properties, high porosity, and strong swelling capability, CP1OP2-Hgel may, in the future, become a new weapon for treating severe nosocomial skin infections or infected chronic wounds. Further investigations in this sense are currently being carried out.

Nowadays, new water disinfection materials attract a lot of attention for their cost-saving and ease of application. Nevertheless, the poor durability of the matrices and the loss of physically incorporated or chemically attached antibacterial agents that can occur during water purification processes considerably limit their prolonged use. In this study, a polystyrene-based cationic resin (R4) with intrinsic broad-spectrum antibacterial effects was produced without needing to be enriched with additional antibacterial agents that could detach during use. Particularly, R4 was achieved by copolymerizing 4-ammonium-butyl-styrene (4-ABSTY) with N,N-dimethylacrylamide (DMAA) and using N-(2-acryloylamino-ethyl)-acrylamide (AAEA) as a cross-linker. The R4 obtained showed a spherical morphology, micro-dimensioned particles, high hydrophilicity, high-level porosity, and excellent swelling capabilities. Additionally, the swollen R4 to its maximum swelling capability, when dried with gentle heating for 3 h, released water following the Higuchi’s kinetics, thus returning to the original structure. In time–kill experiments on the clinical isolates of multidrug-resistant (MDR) pathogens of fecal origin, such as enterococci, Group B Salmonella species, and Escherichia coli, R4 showed rapid bactericidal effects on enterococci and Salmonella, and reduced E. coli viable cells by 99.8% after 4 h. When aqueous samples artificially infected by a mixture of the same bacteria of fecal origin were exposed for different times to R4 in a column, simulating a water purification system, 4 h of contact was sufficient for R4 to show the best bacterial killing efficiency of 99%. Overall, thanks to its physicochemical properties, killing efficiency, low costs of production, and scalability, R4 could become a cost-effective material for building systems to effectively reduce bacterial, even polymicrobial, water contamination.

To exploit the full potential of pomegranate marcs, this study explores different conditions of ‘green’ extraction of ellagitannins and other bio-active phenolic compounds from the ‘external by-product’ of pomegranate industrial processing. Significant recoveries of ellagitannins, free ellagic acid and radical scavenging compounds were obtained by coupling both the traditional (MH) or the hydro-diffusion gravity (MHG) microwave assisted drying to a direct ultrasound assisted extraction (UAE) using a food-grade solvent (EtOH/H2O). The amounts of the ellagitannins after microwave drying were always significantly higher than with the traditional oven drying. Moreover, microwaves reduced the drying times from several hours to few minutes reaching comparable residual moisture content. The microwave hydro-diffusion gravity system allowed the recovery of bio-active compounds in the condensed water too. The comparison of UAE with traditional maceration and decoction highlighted the higher efficiency of UAE in the quicker extraction of bio-active compounds, except for the total ellagitannins which were better recovered after the longer maceration.

Usually, the administration of drugs by feeding tube in dysphagic patients involves handling of marketing licenses outside their term, due to the lack of suitable formulations. This circumstance has put health professionals in the dilemma of choosing the formulation whose manipulation possibly does not alter the effectiveness of the drug. In this regard, a practical guide providing indications on the prescription, handling, and administration of drugs through enteral feeding tube could be of paramount utility. For this purpose, we have considered the 1047 solid oral pharmaceutical forms included in the formulary of San Paolo Hospital (Savona, Italy). From our analysis, it emerges that 95% of medicinal products are worryingly used off-label and 40% have to be managed by the hospital pharmacists without having suitable indications by either the manufacturers or by literature studies. To fill this gap, we have compiled a detailed table containing missing indications derived from pharmacist expertise and evidence-based practices, with the aim that the sharing of our procedures will contribute to make uniform pharmacological therapies from one hospital to another. This study will allow doctors to have easy access to information on drugs that can be prescribed and nurses to become familiar only with the pharmaceutical forms that can be administered.

Untreatable infections, growing healthcare costs, and increasing human mortality due to the rising resistance of bacteria to most of the available antibiotics are global phenomena that urgently require the discovery of new and effective antimicrobial agents. Cationic macromolecules, acting as membrane disruptors, are widely studied, and several compounds, including two styrene-based copolymers developed by us (P5 and P7), have proved to possess potent broad-spectrum antibacterial effects, regardless of the resistance profiles of the bacteria. Here, we first reported the synthesis and physicochemical characterization of new cationic nanoparticles (NPs) (CP1 and OP2), obtained by polymerizing the monomers 4-ammoniummethylstyrene (4-AMSTY) and 4-ammoniumethylstyrene (4-AESTY) hydrochlorides, whose structures were designed using the cationic monomers of P5 and P7 as template compounds. The antibacterial activity of CP1 and OP2 was assessed against several Gram-positive and Gram-negative multi-drug resistant (MDR) pathogens, observing potent antibacterial effects for both CP1 (MICs = 0.1–0.8 µM) and OP2 (MICs = 0.35–2.8 µM) against most of the tested isolates. Additionally, time-killing studies carried out with CP1 and OP2 on different strains of the most clinically relevant MDR species demonstrated that they kill pathogens rapidly. Due to their interesting physicochemical characteristics, which could enable their mutual formulation as hydrogels, CP1 and OP2 could represent promising ingredients for the development of novel antibacterial dosage forms for topical applications, capable of overcoming severe infections sustained by bacteria resistant to the presently available antibiotics.

The genus Acinetobacter consists of Gram-negative obligate aerobic pathogens, including clinically relevant species, such as A. baumannii, which frequently cause hospital infections, affecting debilitated patients. The growing resistance to antimicrobial therapies shown by A. baumannii is reaching unacceptable levels in clinical practice, and there is growing concern that the serious conditions it causes may soon become incurable. New therapeutic possibilities are, therefore, urgently needed to circumvent this important problem. Synthetic cationic macromolecules, such as cationic antimicrobial peptides (AMPs), which act as membrane disrupters, could find application in these conditions. A lysine-modified cationic polyester-based dendrimer (G5-PDK), capable of electrostatically interacting with bacterial surfaces as AMPs do, has been synthesized and characterized here. Given its chemical structure, similar to that of a fifth-generation lysine containing dendrimer (G5K) with a different core, and previously found inactive against Gram-positive bacterial species and Enterobacteriaceae, the new G5-PDK was also ineffective on the species mentioned above. In contrast, it showed minimum inhibitory concentration values (MICs) lower than reported for several AMPs and other synthetic cationic compounds on Acinetobacter genus (3.2–12.7 µM). Time-kill experiments on A. baumannii, A. pittii, and A. ursingii ascertained the rapid bactericidal effects of G5-PDK, while subsequent bacterial regrowth supported its self-biodegradability.

It is widely reported that N-(4-hydroxyphenyl)-retinamide or fenretinide (4-HPR), which is a synthetic amide of all-trans-retinoic acid (ATRA), inhibits in vitro several types of tumors, including cancer cell lines resistant to ATRA, at 1–10 µM concentrations. Additionally, studies in rats and mice have confirmed the potent anticancer effects of 4-HPR, without evidencing hemolytic toxicity, thus demonstrating its suitability for the development of a new chemo-preventive agent. To this end, the accurate determination of 4-HPR levels in tissues is essential for its pre-clinical training, and for the correct determination of 4-HPR and its metabolites by chromatography, N-(4-ethoxyphenyl)-retinamide (4-EPR) has been suggested as an indispensable internal standard. Unfortunately, only a consultable old patent reports the synthesis of 4-EPR, starting from dangerous and high-cost reagents and using long and tedious purification procedures. To the best of our knowledge, no article existed so far describing the specific synthesis of 4-EPR. Only two vendors worldwide supply 4-ERP, and its characterization was incomplete. Here, a scalable, operator-friendly, and one-step procedure to synthetize highly pure 4-EPR without purification work-up and in quantitative yield is reported. Additionally, a complete characterization of 4-EPR using all possible analytical techniques has been provided.

Human neuroblastoma (NB) is a pediatric tumor, which, after an initial response to therapy, usually develops resistance [...]

Oxidative stress (OS), triggered by overproduction of reactive oxygen and nitrogen species, is the main mechanism responsible for several human diseases. The available one-target drugs often face such illnesses, by softening symptoms without eradicating the cause. Differently, natural polyphenols from fruits and vegetables possess multi-target abilities for counteracting OS, thus representing promising therapeutic alternatives and adjuvants. Although in several in vitro experiments, ellagitannins (ETs), ellagic acid (EA), and its metabolites urolithins (UROs) have shown similar great potential for the treatment of OS-mediated human diseases, only UROs have demonstrated in vivo the ability to reach tissues to a greater extent, thus appearing as the main molecules responsible for beneficial activities. Unfortunately, UROs production depends on individual metabotypes, and the consequent extreme variability limits their potentiality as novel therapeutics, as well as dietary assumption of EA, EA-enriched functional foods, and food supplements. This review focuses on the pathophysiology of OS; on EA and UROs chemical features and on the mechanisms of their antioxidant activity. A discussion on the clinical applicability of the debated UROs in place of EA and on the effectiveness of EA-enriched products is also included.

Due to the rapid increase of antimicrobial resistance with ensuring therapeutic failures, the purpose of this study was to identify novel synthetic molecules as alternatives to conventional available, but presently ineffective antibiotics. Variously structured cationic dendrimers previously reported have provided promising outcomes. However, the problem of their cytotoxicity towards eukaryotic cells has not been completely overcome. We have now investigated the antibacterial activities of three not cytotoxic cationic dendrimers (G5Ds: G5H, G5K, and G5HK) against several multidrug-resistant (MDR) clinical strains. All G5Ds displayed remarkable activity against MDR non-fermenting Gram-negative species such as P. aeruginosa, S. maltophilia, and A. baumannii (MICs = 0.5–33.2 µM). In particular, very low MIC values (0.5–2.1 µM) were observed for G5K, which proved to be more active than the potent colistin (2.1 versus 3.19 µM) against P. aeruginosa. Concerning its mechanism of action, in time-killing and turbidimetric studies, G5K displayed a rapid non-lytic bactericidal activity. Considering the absence of cytotoxicity of these new compounds and their potency, comparable or even higher than that provided by the dendrimers previously reported, G5Ds may be proposed as promising novel antibacterial agents capable of overcoming the alarming resistance rates of several nosocomial non-fermenting Gram-negative pathogens.

Drugs delivered by proper carriers enter into the cells much more rapidly and carry out their action much more promptly than in the free forms. A high drug concentration can be sustained for longer periods of time at the target site in the cell. In in vivo conditions, this would translate into a reduction of systemic toxicity, dosage and frequency of dosing. Dendritic polymers significantly affect drug delivery in terms of reaching the target site, modifying the bio-distribution of the drug, and enhancing the efficacy of different drugs including anticancer compounds. 2-({[2-({[(2-tolyl)amino]carbonothioyl}oxy)ethyl]amino}carbo-nyl)benzoic acid 1 is a thiocarbamate derivative belonging to an already reported class of non-nucleoside HIV-1 reverse transcriptase inhibitors. In in vitro assay it showed no cytotoxic effects but was endowed with very low solubility and poor activity against wild-type HIV-1 (EC50 = 27 μM). With the aim at improving its water solubility, 1 has been successfully incorporated inside non-toxic amino acids-modified core-shell hetero dendrimers. IR, NMR, zeta potential, mean size of particles, buffer capacity and in vitro release profile of prepared materials were reported. All dendriplexes were evaluated in cell-based assays to assess their cytotoxic profile. The obtained complexes, which harmonize a peripheral polycationic character and a buffer capacity which presuppose efficient cells penetration and increased residence time with a not PAMAM structured biodegradable scaffold, were well water-soluble and could rationally appear as a promising set of prodrugs for safe in vivo administrations.

Dendrimers are macromolecules characterized by high controlled size, shape and architecture, presence of inner cavities able to accommodate small molecules and many peripheral functional groups to bind target entities. They are of eminent interest for biomedical applications, including gene transfection, tissue engineering, imaging, and drug delivery. The well-known pharmacological activities of ursolic and oleanolic acids are limited by their small water solubility, non-specific cell distribution, low bioavailability, poor pharmacokinetics, and their direct administration could result in the release of thrombi. To overcome such problems, in this paper we described their physical incorporation inside amino acids-modified polyester-based dendrimers which made them highly water-soluble. IR, NMR, zeta potential, mean size of particles, buffer capacity and drug release profiles of prepared materials were reported. The achieved water-soluble complexes harmonize a polycationic character and a buffer capacity which presuppose efficient cell penetration and increased residence time with a biodegradable cell respectful scaffold, thus appearing as a promising team of not toxic prodrugs for safe administration of ursolic and oleanolic acids.

2-(4-Bromo-3,5-diphenyl-pyrazol-1-yl)-ethanol (BBB4) was synthetized and successfully evaluated concerning numerous biological activities, except for antimicrobial and cytotoxic effects. Due to the antimicrobial effects possessed by pyrazole nucleus, which have been widely reported, and the worldwide need for new antimicrobial agents, we thought it would be interesting to test BBB4 and to evaluate its possible antibacterial effects. Nevertheless, since it is water-insoluble, the future clinical application of BBB4 will remain utopic unless water-soluble BBB4 formulations are developed. To this end, before implementing biological evaluations, BBB4 was herein re-synthetized and characterized, and a new water-soluble BBB4-based nano-formulation was developed by its physical entrapment in a biodegradable non-cytotoxic cationic dendrimer (G4K), without recovering harmful solvents as DMSO or surfactants. The obtained BBB4 nanoparticles (BBB4-G4K NPs) showed good drug loading (DL%), satisfying encapsulation efficiency (EE%), and a biphasic quantitative release profile governed by first-order kinetics after 24 h. Additionally, BBB4-G4K was characterized by ATR-FTIR spectroscopy, NMR, SEM, dynamic light scattering analysis (DLS), and potentiometric titration experiments. While, before the nanotechnological manipulation, BBB4 was completely water-insoluble, in the form of BBB4-G4K NPs, its water-solubility resulted in being 105-fold higher than that of the pristine form, thus establishing the feasibility of its clinical application.

Macromolecular systems with well-defined sizes, shapes and high controlled architecture like dendrimers are of eminent interest in nanomedical applications such as drug delivery, gene transfection, and imaging. In this paper versatile protocols for the synthesis of polyester-based, hydrolysable, polycationic dendrimers have been setup. Fourth and fifth generation dendrimers equipped with several peripheral hydroxyl groups were prepared from 2, 2-bis(hydroxymethyl)propanoic acid. They were successfully esterified with arginine alone or mixed with lysine or O-methyltyrosine and with dipeptide arginine-glycine and seven polycationic dendrimers were finally obtained as hydrochlorides. Their structures and composition were confirmed by NMR analysis and by experimental molecular weight computed by volumetric titration and their buffer capacity was higher than fourth generation polyamidoamine (G4- PAMAM) derivatives taken as reference. The synthesized dendrimers harmonize a polycationic character and a buffer capacity which presuppose a good transfection efficiency with a degradable scaffold thus appearing as a promising team of new non-toxic vectors for biomedical applications.

Dendrimers, the emerging man made, highly branched, star-shaped macromolecules with nanometer-scale dimensions are well known for their well defined and high controlled architecture, their versatility and high functionality and are of eminent interest in nanomedical applications such as drug delivery, gene transfection, and imaging. In this paper, versatile protocols for the synthesis of polyester-based, hydrolysable, polycationic dendrimers have been setup. A fourth generation dendrimer equipped with 48 peripheral hydroxyl groups was prepared from 2,2-bis(hydroxymethyl)propanoic acid and was used for grafting BOC-amino acids or as “hypercores” on which dendrons functionalized with BOC-amino acids were attached. A library of 15 polycationic homo- and hetero-dendrimers in the form of hydrochloride was obtained. Their structures and composition were confirmed by NMR analysis and by experimental molecular weight computed by volumetric titration. Their buffer capacity and results obtained from cytotoxicity assays and tests of binding with both pDNA and siRNA were very satisfactory.

Glutamate is the major excitatory neurotransmitter in the brain. 2-Chloro-4-[2,5-dimethyl-1-(4-trifluoromethoxyphenyl)-1H-imidazol-4-ylethynyl]pyridine (5) (CTEP) is the first reported negative allosteric modulator of the metabotropic glutamate receptor 5 (mGlu5NAM) with a biological half-life of 48 hours in rodents and therefore considered an ideal tool for chronic studies in rats and mice. In this work an optimized protocol for the synthesis and purification of CTEP is reported. Through the developed new work up scrupulously described in detail, CTEP was obtained in 63 % yield, with a significant improvement in comparison with the methods reported in literature (27%) and in a tripled overall yield (27% versus 9%). Furthermore, all the intermediates between which the unreported multifunctional and appealing compound 8 as well as the final compound 5 were isolated, purified and fully characterized by IR, NMR ( 1H NMR and 13C NMR), melting point, except for the oily 7, and Elemental analysis.

Etoposide (ETO) is a cytotoxic drug that exerts its effect by increasing reactive oxygen species (ROS) production. Although ETO is widely used, fast metabolism, poor solubility, systemic toxicity, and multi-drug resistance induction all limit its administration dosage and its therapeutic efficiency. In order to address these issues, a biodegradable dendrimer was prepared for entrapping and protecting ETO and for enhancing its solubility and effectiveness. The achieved dendrimer complex with ETO (CPX 5) showed the typical properties of a well-functioning delivery system, i.e., nanospherical morphology (70 nm), optimal Z-potential (&minus, 45 mV), good drug loading (37%), very satisfying entrapment efficiency (53%), and a remarkably improved solubility in biocompatible solvents. In regards to its cytotoxic activity, CPX 5 was tested on neuroblastoma (NB) cells with very promising results. In fact, the dendrimer scaffold and ETO are able to exert per se a cytotoxic and pro-oxidant activity on human NB cells. When CPX 5 is combined with ETO, it shows a synergistic action, slowly releasing the drug over time and significantly improving and protracting bioactivity. On the basis of these findings, the prepared ETO reservoir represents a novel biodegradable and promising device for the delivery of ETO into NB cells.

Natural polyphenols such as Gallic Acid (GA) form an important class of bioactive chemical entities that, having innumerable biological properties, could represent a safer alternative to common drugs against several disorders, including platelet aggregation, radical oxygen species (ROS) hyperproduction, oxidative stress (OS) and bacterial infections. Unfortunately, their clinical uses are limited by pharmacokinetics drawbacks and high sensitivity to environmental factors. In order to overcome these problems and to exploit the GA curative potentials, it has been linked to a biodegradable nanospherical dendrimer matrix, capable of protecting it, thus obtaining a GA-enriched nanosized dendrimer (GAD) endowed with a strong antioxidant capacity. GAD activity as an inhibitor of platelet aggregation and ROS accumulation and its antibacterial efficiency are evaluated here and compared to those of free GA, obtaining outcomes never achieved. Regarding platelet aggregation induced by thrombin and collagen, the GAD proved to be stronger by 7.1 and 7.3 times, respectively. Furthermore, the GAD showed a ROS inhibitory activity higher than that of GA by 8.1 (thrombin) and 6.9 (collagen) times. Concerning the antibacterial activities, evaluated on eleven multi-resistant Gram-positive strains of clinical relevance, the GAD is far more potent than GA, by exerting a growth inhibitory activity at MIC (μM) concentrations lower by factors in the range 12–50.

In the recent years, plastic-based shopping bags have become irregular and progressively replaced by compostable ones. To be marketed, these &ldquo, new plastics&rdquo, must possess suitable requirements verified by specific bodies, which grant the conformity mark, and the approved physicochemical properties are periodically verified. The fast, inexpensive, non-destructive, easy to use, and reproducible Fourier-Transform infrared (FTIR) spectroscopy is a technique routinely applied to perform analysis in various industrial sectors. To get reliable information from spectral data, chemometric methods, such as Principal Component Analysis (PCA), are commonly suggested. In this context, PCA was herein performed on 4, 5, and 21 &times, 3251 matrices, collecting the FTIR data from regular and irregular shopping bags, including three freshly extruded films from the Italian industry MecPlast, to predict their compliance with legislation. The results allowed us to unequivocally achieve such information and to classify the bags as suitable for containing fresh food in bulk or only for transport. A self-validated linear model was developed capable to estimate, by acquiring a single FTIR spectrum if, after the productive process, the content of renewable poly-lactic-acid (PLA) in a new produced film respect the expectations. Surprisingly, our findings established that among the grocery bags available on the market, irregular plastic-based shopping bags continue to survive.

Environmental factors, oxidation and microorganisms contamination, are the major causes for food spoilage, which leads to sensory features alteration, loss of quality, production of harmful chemicals and growth of foodborne pathogens capable to cause severe illness. Synthetic preservatives, traditional conserving methods and food packaging (FP), although effective in counteracting food spoilage, do not allow the real-time monitoring of food quality during storage and transportation and assent a relatively short shelf life. In addition, FP may protect food by the spoilage caused by external contaminations, but is ineffective against foodborne microorganisms. FP preservative functionalities could be improved adding edible natural antioxidants and antimicrobials, but such chemicals are easily degradable. Nowadays, thanks to nanotechnology techniques, it is possible to improve the FP performances, formulating and inserting more stable antioxidant/antimicrobial ingredients, improving mechanical properties and introducing intelligent functions. The state-of-the-art in the field of nanomaterial-based improved FP, the advantages that might derive from their extensive introduction on the market and the main concerns associated to the possible migration and toxicity of nanomaterials, frequently neglected in existing reviews, have been herein discussed.

The immune system and the central nervous system message each other to preserving central homeostasis. Both systems undergo changes during aging that determine central age-related defects. Ellagic acid (EA) is a natural product which is beneficial in both peripheral and central diseases, including aging. We analyzed the impact of the oral administration of a new oral ellagic acid micro-dispersion (EAm), that largely increased the EA solubility, in young and old mice. Oral EAm did not modify animal weight and behavioral skills in young and old mice, but significantly recovered changes in &ldquo, ex-vivo, in vitro&rdquo, parameters in old animals. Cortical noradrenaline exocytosis decreased in aged mice. EAm administration did not modify noradrenaline overflow in young animals, but recovered it in old mice. Furthermore, GFAP staining was increased in the cortex of aged mice, while IBA-1 and CD45 immunopositivities were unchanged when compared to young ones. EAm treatment significantly reduced CD45 signal in both young and old cortical lysates, it diminished GFAP immunopositivity in young mice, but failed to affect IBA-1 expression in both young and old animals. Finally, EAm treatment significantly reduced IL1beta expression in old mice. These results suggest that EAm is beneficial to aging and represents a nutraceutical ingredient for elders.

Ellagic acid, a polyphenolic compound present in fruit and berries, has recently been the object of extensive research for its antioxidant activity, which might be useful for the prevention and treatment of cancer, cardiovascular pathologies, and neurodegenerative disorders. Its protective role justifies numerous attempts to include it in functional food preparations and in dietary supplements, and not only to limit the unpleasant collateral effects of chemotherapy. However, ellagic acid use as a chemopreventive agent has been debated because of its poor bioavailability associated with low solubility, limited permeability, first pass effect, and interindividual variability in gut microbial transformations. To overcome these drawbacks, various strategies for oral administration including solid dispersions, micro and nanoparticles, inclusion complexes, self-emulsifying systems, and polymorphs were proposed. Here, we listed an updated description of pursued micro and nanotechnological approaches focusing on the fabrication processes and the features of the obtained products, as well as on the positive results yielded by in vitro and in vivo studies in comparison to the raw material. The micro and nanosized formulations here described might be exploited for pharmaceutical delivery of this active, as well as for the production of nutritional supplements or for the enrichment of novel foods.

Several anti-inflammatory agents based on pyrazole and imidazopyrazole scaffolds and a large library of substituted catechol PDE4D inhibitors were reported by us in the recent past. To obtain new molecules potentially able to act on different targets involved in inflammation onset we designed and synthesized a series of hybrid compounds by linking pyrazole and imidazo-pyrazole scaffolds to differently decorated catechol moieties through an acylhydrazone chain. Some compounds showed antioxidant activity, inhibiting reactive oxygen species (ROS) elevation in neutrophils, and a good inhibition of phosphodiesterases type 4D and, particularly, type 4B, the isoform most involved in inflammation. In addition, most compounds inhibited ROS production also in platelets, confirming their ability to exert an antiinflammatory response by two independent mechanism. Structure&ndash, activity relationship (SAR) analyses evidenced that both heterocyclic scaffolds (pyrazole and imidazopyrazole) and the substituted catechol moiety were determinant for the pharmacodynamic properties, even if hybrid molecules bearing to the pyrazole series were more active than the imidazopyrazole ones. In addition, the pivotal role of the catechol substituents has been analyzed. In conclusion the hybridization approach gave a new serie of multitarget antiinflammatory compounds, characterized by a strong antioxidant activity in different biological targets.

Selected members of the large rolipram-related GEBR family of type 4 phosphodiesterase (PDE4) inhibitors have been shown to facilitate long-term potentiation and to improve memory functions without causing emetic-like behavior in rodents. Despite their micromolar-range binding affinities and their promising pharmacological and toxicological profiles, few if any structure-activity relationship studies have been performed to elucidate the molecular bases of their action. Here, we report the crystal structure of a number of GEBR library compounds in complex with the catalytic domain of PDE4D as well as their inhibitory profiles for both the long PDE4D3 isoform and the catalytic domain alone. Furthermore, we assessed the stability of the observed ligand conformations in the context of the intact enzyme using molecular dynamics simulations. The longer and more flexible ligands appear to be capable of forming contacts with the regulatory portion of the enzyme, thus possibly allowing some degree of selectivity between the different PDE4 isoforms.

An unprecedented, highly convergent, high-yielding, one-pot synthesis of (acyl)hydrazones and thiosemicarbazones was carried out by the in situ condensation of isolable iminium chlorides of imidazolidin-2-(thio)one, tetrahydropyrimidin-2-thione and indole derivatives with nitrogen nucleophiles in the presence of a base. The developed reaction procedure is largely advantageous. It is highly parallelizable, no intermediates need to be isolated and minimal sample handling is required during the purification steps. Some relevant reaction parameters including reaction temperature and p $$K_\mathrm{a}$$ of the base are discussed. NMR analysis was carried out to assess the stereochemistry of the obtained compounds. The stereochemical outcome of the reaction was found to be affected by the nature of the nitrogen-containing nucleophile being the majority of the derivatives isolated as single geometric isomers. The cytotoxicity and antiviral activities of the prepared compounds have been preliminary assessed. In cell-based screenings some of the derivatives proved to be cytotoxic at low micromolar concentrations and interesting anti-Reo-1 properties have been detected.

The glycosylation of D-galactose glycopolymers to produce functionalized polymers expected to be bioactive as substrates or inhibitors of enzymes of the copper amine oxidase class (CAOs, EC 1.4.3.6), attained previously with an unpractical, but significant process requesting a large excess of glycosyl acceptor, has now been achieved with a method based on the use of peracetylated D-galactose moieties, in the presence of SnCl4 or BF3·Et2O as promoters, which employs glycosyl donors in nearly stoichiometric ratio with the desired glycosyl acceptor. After the synthesis of an appropriate model molecule acting as a guide, the new method was set up with extensive NMR investigations on the same model molecule and soluble polymeric reagents and products, performing a full rationalization of the chemical behavior of the various α and β pyranose and furanose forms of D-galactose residues. Glycosylated systems containing functionalities protected with trifluoroacetyl and acetyl groups were fully deprotected in one step through a reduction procedure with NaBH4.

The multistep preparation of the new 10-substituted 2-(1-piperazinyl)pyrimido[1,2- a ]benzimidazol-4(10 H )-ones 6a – o , and of the two isomers 10-ethyl-2-(diethylamino)pyrimido[1,2- a ]benzimidazol-4(10 H )-one 6p and 10-ethyl-4-(diethylamino)pyrimido[1,2- a ]benzimidazol-2(10 H )-one 13 , as well as the in vitro evaluation of their inhibitory activity on human platelet aggregation induced in platelet-rich plasma by ADP, collagen or the Ca 2+ ionophore A23187 were here described. Nine out of fifteen 2-(1-piperazinyl)derivatives ( 6g – o ) showed good inhibitory properties towards all the platelet aggregation agonists used. Moreover, a molecular modelling study has been performed on two of the best compounds of this series ( 6i and 6o ) to confirm in silico their interactions with the catalytic site of human platelet PDE3, using the X-ray data of the PDE3B isoform in complex with an inhibitor.

As a part of a work aimed at the synthesis of properly functionalized nanostructured glycopolymers suitable for interaction studies with copper amine oxidases, D-galactose was transformed through a six step sequence into the monomer N-(4-vinylbenzoyl)-6-amino-6-deoxy-D-galactose (1) which was converted into nanostructured crosslinked polymers (R1) by radical precipitation polymerization and into linear polymers (P1) by solution polymerization. The linear polymers were useful models for setting up glycosylation reactions to introduce N-trifluoroacetyl-4-(4-hydroxybutoxy)benzylamine residues in the presence of camphor sulfonic acid as the catalyst and to extend them to the nanostructured systems. The advancement of the glycosylation reaction was performed through the synthesis and glycosylation of N-benzoyl-6-amino-6-deoxy-D-galactose (9) as the model molecule for accurate NMR investigations. The removal of the trifluoroacetyl protecting group, unexpectedly stable, in glycosylated P1 and R1 was achieved with sodium borohydride.

Saccharidic monomers and a macromonomer were synthesized and copolymerized in the presence of divinylbenzene (DVB) as crosslinker in conditions of separation of phases to give hydrophilic nanostructured sugar-based vinyl copolymers. Appropriate model molecules such as N -benzyl- d -gluconamide for the saccharidic copolymers and 4-(4-chlorobutoxy)benzaldehyde and ( E )-4-(4-chloro-2-butenyloxy)benzaldehyde for electrophilic reagents prefiguring possible copper amine oxidase inhibitors allowed identification of conditions for useful monofunctionalizations mainly at the position 2 of the saccharidic units. The examined samples of the nanostructured copolymers from one of the monomers proved to be stable enough to tolerate the functionalization reactions without loss of morphology.