Search

Nanobacterial cellulose (NBC) was produced and incorporated into biodegradable poly(vinyl alcohol) (PVA) in different weight ratios to obtain polymer nanocomposite membranes. The physicochemical properties of the membranes were studied using Fourier transform infrared (FTIR) spectroscopy, a universal testing machine (UTM), thermogravimetric analysis (TGA), wide-angle X-ray diffraction (WAXD) techniques, and field emission scanning electron microscopy (FESEM). FTIR confirmed the consolidation of NBC into PVA by exhibiting significant changes in the peaks compared to NBC and PVA individually. The highest tensile strength of 53.33 MPa and 235.30% elongation at break of the membrane M-10 mass % NBC was obtained, illuminating that NBC provides stiffness and PVA imparts elasticity. WAXD revealed that the crystalline nature of the membrane increases up to 10 mass % and decreases beyond it. The effect of NBC on the poly(vinyl alcohol) membranes for food packaging was investigated systematically. Among all the membranes, M-10 mass % NBC was found to be the most suitable for packaging applications. Membranes had antimicrobial activity against food microbes and showed degradability behavior in the soil. The tests on membranes for packaging revealed that fruits were protected from spoilage caused by microorganisms. Hence, the prepared membranes could be used as an alternative to conventional plastics for packaging applications.

Cellulase was produced by Cellulomonas uda utilizing banana stem waste by solid state fermentation (SSF). The different parameters effects considered like particle size of substrate, pH(incubation and extraction), incubation period, temperature (incubation and extraction), media components (yeast extract and peptone) and moisture of substrate on the production of cellulase was investigated. The optimum activity of cellulase produced by Cellulomonas uda on banana waste for particle size (6.97 IU/min for 1mm), extraction pH (7.13 IU/min for pH 7), incubation pH(6.97 IU/min for pH 7), extraction temperature (7.10 IU/min for 500C), incubation temperature (7.20 IU/min for 450C), incubation period (7.20 IU/min on 3rd day), moisture content (7.12 IU/min for 100% ), peptone content ( 7.23 IU/min for 0.5 gm) and yeast extract content (7.18 IU/min for 0.30gm) was recorded. The cellulase produced by Cellulomonas uda by using banana stem waste indicates the socio-econic utilization of agricultural waste. After purification and characterization; cellulase enzyme can be used in industrial processes.

Xylanases are enzymes that convert xylan into xylose, xylobiose, and xylotriose. The present study deals with the production and optimization of xylanase through Solid-State Fermentation (SSF) using different agricultural wastes by Aspergillus spp. The Plackett Burman (PB) design was used to screen significant media components affecting the xylanase production. The carbon sources screened were wheat bran, rice bran, sugarcane bagasse, corn cob, and orange peel. The nitrogen sources screened were yeast extract, peptone, (NH4)2SO4, Na2NO3, and urea. Also, nine different salts such as KCl, MgSO4, Na2HPO4, CaCl2, FeSO4, ZnSO4, Na2CO3, KH2PO4, and NaH2PO4 which act as trace elements were screened. The results showed that wheat bran, yeast extract, Na2NO3 and KCl are the significant factors that affect xylanase production. A 33 Full Factorial Design (FFD) was performed to optimize the significant media components (wheat bran, KCl, yeast extract) obtained from PB design using Response Surface Methodology (RSM). Statistical analysis of results showed that wheat bran, KCl, yeast extract, and interaction between wheat bran and yeast extract were found to be significant. The optimum concentration of wheat bran, KCl, yeast extract was 8 g/L, 0.1 g/L and 3 g/L. The Partial purification of xylanase was carried out using ammonium salt precipitation and dialysis. Gel filtration chromatography was performed to optimize the elution time, which was found to be 6 minutes. Application of xylanase in orange juice clarification was studied at 40 °C, 50 °C, and 60 °C. The optimum temperature obtained was 60 ºC.

Xylanase is an enzyme that acts on xylan and degrades it into xylose. Xylanase may be produced by several different microbes such as bacteria and fungi. Xylanase has significant applications in food industries for improving dough handling and improving the quality of baked products in the extraction of starch, coffee, and plant oils. Xylanase, along with pectinase and cellulose, has enormous application in the clarification of fruit juices. In the present study, xylanase was produced by solid-state fermentation using lemon peel as substrates. Aspergillus Niger was induced to produce xylanase by frequent sub-culturing on a medium containing 2% xylan. OFAT was analyzed by using several fermentation parameters such as moisture content, particle size, incubation period, incubation temperature, peptone concentration, and pH of the extraction buffer. Under optimized conditions, the maximum xylanase activity was found for particle size of 1.7mm, moisture content of 80%, peptone concentration in nutrient solution at 0.3%, and extraction pH of 7.0. Hence, xylanase can be further subjected to down streaming processes and therefore for various applications.

The demand for microbial pectinase has increased due to its vast applications in different industries. The current study dealt with the synthesis of pectinase by a novel native strain Aspergillus cervinus ARS2 using agro-industrial waste. Comparative studies conducted on pectinase production by submerged fermentation (SmF) and solid-state fermentation (SSF) showed that pectinase activity was more increased in SSF (44.51 ± 1.33 IU/mL) than in SmF (40.60 ± 1.15 IU/mL) when using orange peel as a substrate. Using SSF, one-factor-at-a-time (OFAT) studies were conducted, considering different process variables such as inoculum size, initial pH, incubation time, moisture content, incubation temperature, and substrate particle size, all of which affected the pectinase activity. OFAT results showed the highest pectinase activity at an inoculum size of 106 spores/mL (43.11 ± 1.06 U/mL), an incubation time of 6 days (43.81 ± 1.21 U/mL), a moisture content of 100% (44.30 ± 1.69 U/mL), a substrate particle size of 1.7 mm (42.06 ± 1.20 U/mL), an incubation temperature of 37 °C (45.90 ± 1.33 U/mL), and an initial pH of 4 (43.31 ± 0.89 U/mL). The identified significant process variables were then optimized by response surface methodology (RSM)-central composite design (CCD). The results showed optimum pectinase activity of 107.14 ± 0.71 IU/mL for a substrate particle size of 2 mm, an incubation temperature of 31.5 °C, an initial pH of 4.9, and a moisture content of 107%, which was obtained from the Minitab optimizer. By using statistical optimization, the pectinase production from the isolated novel fungal strain A. cervinus ARS2 was increased 2.38-fold. Therefore, the A. cervinus ARS2 strain can be further explored for large-scale pectinase production which could meet the growing industrial demands.

Polyelectrolyte complex membranes (PECMs) were prepared by combining sodium carboxymethyl cellulose (NaCMC) and gelatin (Ge) with variations in the Ge content in the NaCMC matrix. Characterization methods, such as infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), contact angle analysis (CA), and universal testing machines (UTM) were used to investigate the physicochemical studies of the prepared membranes. The pervaporation characteristics of membranes with Ge content were investigated using an azeotropic mixture of water and bioethanol. The obtained data revealed that the membrane with 15 mass% of Ge (M-3) showed a maximum flux of 7.8403 × 10−2 kg/m2·h with separation selectivity of 2917 at 30 °C. In particular, the total and water flux of PECMs are shown as very close to each other indicating that the fabricated membranes could be employed to successfully break the azeotropic point of water–bioethanol mixtures. Using temperature-dependent permeation and diffusion data, the Arrhenius activation parameters were calculated, and the obtained values of water permeation (Epw) were considerably smaller than bioethanol permeation (EpE). Developed membranes showed the positive heat of sorption (ΔHs), suggesting that Henry’s sorption mode is predominant.

Pectinolytic enzymes are related enzymes that hydrolyze pectic substances. Pectinolytic enzymes are of great interest in industrial applications for softening fruits, extracting and clarifying juices, extracting olive oil, retting textile fibers, preparing gel, and isolating protoplasts. The current work presents acidic extracellular pectinase production using low-cost agro-industrial waste with the indigenously isolated novel strain Aspergillus cervinus. Two fungal isolates, ARS2 and ARS8, with maximum pectinase activity, 41.88 ± 1.57 IU/mL and 39.27 ± 1.14 IU/mL, respectively, were screened out of 27 isolates from decayed fruit peels (orange, banana, and lemon) and soil containing decomposed vegetables. The isolate ARS2, identified as Aspergillus cervinus by molecular characterization, showed the highest pectinase activity of 43.05 ± 1.38IU/mL during screening and was further used for media component screening and optimization studies. To understand their effect on pectinase activity, one-factor-at-a-time (OFAT) studies were conducted on carbon sources, nitrogen sources, and mineral salts. The OFAT results showed the highest pectinase activity for orange peel (carbon source) at 44.51 ± 1.33 IU/mL, peptone (nitrogen source) at 45.05 ± 1.04 IU/mL, and NaH2PO4 (mineral salts) at 43.21 ± 1.12 IU/mL. The most significant media components screened by the Plackett–Burman (PB) design based on the p-value, Pareto chart, and main effect plot, were orange peel (p < 0.001), peptone (p < 0.001), NaH2PO4 (p < 0.001), and KH2PO4 (p < 0.001), which were further optimized using Response Surface Methodology (RSM) and Central Composite Design (CCD). The optimization results for the media components showed a maximum pectinase activity of 105.65 ± 0.31 IU/mL for 10.63 g orange peel, 3.96 g/L peptone, 2.07 g/L KH2PO4, and 2.10 g/L NaH2PO4. Thus, it was discovered that the indigenously isolated novel strain Aspergillus cervinus ARS2 was able to successfully produce a significant amount of pectinase using agro-industrial waste. Therefore, it can be considered for the large-scale optimized production of pectinase to meet industrial demands.

Zinc Oxide Nanoparticles (ZnONPs) are one of the most widely used metal oxide nanoparticles in biological applications because of their outstanding biocompatibility, affordability, and low toxicity. In biomedicine, ZnONPs have shown promise, particularly in the disciplines of anticancer and antibacterial fields. In comparison to other standard synthesis methods, the environmentally-friendly synthesis of metallic nanoparticles utilizing various plant extracts is a good option. The current research focuses on the synthesis of zinc oxide nanoparticles (ZnONPs) from R. sativus leaf extract under various physical conditions (Precipitation method). Analytical methods were used to confirm and characterize the produced ZnONPs. The spherical nature of the produced nanoparticles was established by SEM analysis. The generation of very pure ZnONPs was confirmed by EDS data. The crystalline nature of the produced nanoparticles, with a particle size of 66.47 nm, was confirmed by XRD. The XRD graphs’ presence of the (100), (002), and (101) planes strongly suggest the production of wurtzite ZnO. The visual and infrared area exhibits transmissions of 84 percent in the pH 10 nanoparticles. The band gap of the nanoparticles increases from 3.34 to 3.38 eV when the pH increases. These nanoparticles were effective against both Gram-positive and Gram-negative bacteria. The effect of several process parameters such as pH and temperature were investigated, and the best conditions were discovered to be pH 12 and 80 °C, respectively. The effect of ZnONPs was tested with human breast cancer cells (MCF-7), and they showed significant cytotoxic results. Collectively, our data suggest that ZnONPs of R. sativus leaf extract inhibit breast cancer cell lines. The ZnONPs are, therefore, a prospective source of chemopreventive drugs that merit additional exploration in order to uncover lead compounds with cancer chemotherapeutic potential.

The central dogma of life beginning with DNA leading to RNA and subsequently to protein is the unifying principle and corner stone to the understanding of biology. With the advent of sophisticated and high throughput sequencing, enormous data is being generated. This has made the bio-informatics tools indispensable to decipher the data into meaningful conclusions. The objective of the present study was to comprehend the understanding of Genomics and Proteomics with the use of Bioinformatics tools. The course project activity was performed for Genomics & Proteomics course of VII semester undergraduate students of Engineering in Biotechnology. The students were grouped into team of four and assigned with one pathogenic bacterium. The activity involved identifying a pathogenesis-related protein, retrieving the DNA sequences of the protein, finding conserved domains, building phylogenetic relationship amongst the homologous organisms, genome annotation, predicting secondary and tertiary structure of proteins and deducing its stability. In the process, the students were engaged in active learning by the use of various Bioinformatics tools and repositories. The students were thus able to predict the secondary and tertiary structure of protein beginning with DNA sequences. The activity was instrumental in addressing the Graduate attributes. Rubrics-based assessment was performed to measure the attainment level on the scale of 10. The attainment ranged from 7.28 to 9.25 for different performance indicator (PI) of the graduate attributes. A formal anonymous feedback from the students revealed that the activity helped in appreciating the intricate relationship between Genomics and Proteomics by integrating the related concepts.