Search

Coastal depositional systems are normally classified based on the relative input of wave, tide, and river processes. While wave- through to river-dominated environments are well characterized, environments along the wave-to-tide continuum are relatively poorly understood and this limits the reliability and utility of coastal classification schemes. Two tidal shoreface models, open-coast tidal flats (OCTF) and tidally modulated shorefaces (TMS), have been introduced for mixed wave-tide coastal settings. Following nearly two decades of research on tidal shorefaces, a number of significant insights have been derived, and these data are used here to develop a unified model for such systems. First, OCTFs are components of larger depositional environments, and in multiple published examples, OCTFs overlie offshore to lower shoreface successions that are similar to TMS. Consequently, we combine OCTFs and TMSs into a single tidal shoreface model where TMS (as originally described) and TMS-OCTF successions are considered as variants along the wave-tide continuum. Second, tidal shoreface successions are preferentially preserved in low- to moderate-wave energy environments and in progradational to aggradational systems. It is probably difficult to distinguish tidal shorefaces from their storm-dominated counterparts. Third, tidal shorefaces, including both TMSs and OCTFs, should exhibit tidally modulated storm deposits, reflecting variation in storm-wave energy at the sea floor resulting from the rising and falling tide. They may also exhibit interbedding of tidally generated structures (e.g. double mud drapes or bidirectional current ripples), deposited under fairweather conditions, and storm deposits (e.g. hummocky cross-stratification) through the lower shoreface and possibly into the upper shoreface.The development of the tidal shoreface model sheds light on the limitations of the presently accepted wave-tide-river classification scheme of coastal environments and a revised scheme is presented. In particular, tidal flats are components of larger depositional systems and can be identified in the rock record only in settings where intertidal and supratidal deposits are preserved; consequently, they should not represent the tide-dominated end-member of coastal systems. Instead, we suggest that tide-dominated embayments should occupy this apex. Tide-dominated embayments exhibit limited wave and river influence and include a wide range of geomorphological features typically associated with tidal processes, including tidal channels, bars and flats., Les systèmes de dépôts côtiers sont normalement classés en fonction de l’apport relatif des processus liés à la houle, aux marées et aux rivières. Si les environnements dominés par la houle et les rivières sont bien caractérisés, les environnements le long du continuum houle-marée sont relativement mal compris, ce qui limite la fiabilité et l’utilité des systèmes de classification des côtes. Deux modèles d’avant-plages tidales, les estrans ouverts (open-coast tidal flats; OCTF) et les avant-plages modulées par la marée (tidally modulated shoreface; TMS), ont été introduits pour les milieux côtiers mixtes, houle-marée. Suite à près de deux décennies de recherche sur les avant-plages tidales, un certain nombre d’informations importantes ont été obtenues et ces données sont utilisées ici pour développer un modèle unifié pour ces systèmes. Tout d’abord, les OCTF sont les composants de systèmes de dépôt plus vastes et, dans de nombreux exemples publiés, les OCTF recouvrent des successions sédimentaires allant du large à l’avant-plage inférieure, similaires à celle des TMS. Par conséquent, nous combinons les OCTF et les TMS en un seul modèle d’avant-plage tidale où les TMS (tel que décrit à l’origine) et les successions TMS-OCTF sont considérés comme des variantes le long du continuum houle-marée. Deuxièmement, les successions d’avant-plages tidales sont préférentiellement préservées dans des environnements ayant une houle faible à modérée et dans des systèmes progradant et aggradant. Il est probablement difficile de distinguer les avant-plages tidales de leurs homologues dominés par les tempêtes. Troisièmement, les avant-plages tidales, incluant à la fois les TMS et les OCTF devraient présenter des dépôts de tempête modulés par la marée, reflétant ainsi la variation de l’énergie des vagues de tempête sur le fond marin liée à la marée montante et descendante. Les avant-plages tidales peuvent également présenter une interstratification de structures générées par la marée (par exemple, des doubles drapages argileux ou des rides de courants bidirectionnelles) déposées pendant des conditions de beau temps, et des dépôts de tempête (par exemple, des stratifications en mamelons) au niveau de l’avant-plage inférieure et éventuellement de l’avant-plage supérieure.Le développement du modèle d’avant-plage tidale met en lumière les limites de la classification tripartite (houle-marée-rivière) des environnements côtiers actuellement acceptée et une classification révisée est présentée. En particulier, les OCTF et les estrans sont des composantes de systèmes dedépôt plus importants et ne peuvent être identifiés que dans le registre sédimentaire dans les milieux où les dépôts intertidaux et supratidaux sont préservés; par conséquent, ils ne devraient pas représenter le membre extrême des systèmes côtiers dominé par la marée. Nous suggérons plutôt que les baies dominées par la marée occupent cette place. Les baies dominées par les marées présentent une influence limitée des vagues et des rivières et comprennent un large éventail de caractéristiques géomorphologiques généralement associées aux processus de marée, notamment des chenaux, des barres et des platiers tidaux.

Lithofacies and granulometric analysis were carried out to decipher the depositional environment of the Fort Member of the Jurassic Jaisalmer Formation. Based on field data nine lithofacies have been identified including trough cross-bedded sandstones, planar cross-bedded sandstones, matrix supported conglomerates, thinly bedded siltstone and sandstones, herringbone cross-bedded sandstones, wave rippled sandstones, laminated sandstones, hummocky cross-bedded sandstones, limestones and shales. Granulometric analysis of the sandstones samples has been carried out for their statistical and textural parameters. Bivariant plots of textural parameters such as graphic skewness versus graphic standard deviation and kewness versus standard deviation confirm the high energy (beach) origin of sandstones. These results suggest a wide spectrum of marine environments ranging from inner shelf to upper shoreface for the Fort Member sandstones.

The shallow marine environment represents a region of high biological productivity, ecological diversity, and complex oceanographic conditions, and often supports various human activities and industries. Mapping of the seafloor in shallow marine environments reveals seafloor features in detail, shedding light on a range of natural and anthropogenic processes. We present a high-resolution (2-m) multibeam dataset, combined with geologic samples that reveals a complete map of the seafloor from the land-water interface to ∼350 m water depth within Queen Charlotte Sound/Tōtaranui (QCS) and Tory Channel/Kura Te Au (TC), Marlborough Sounds, New Zealand. These data reveal that the seafloor geomorphology and distribution of natural and anthropogenic features varies spatially from the inner QCS to the Cook Strait. Tidal currents play a large role in the erosion, transport, and deposition of sediments in QCS and TC. The distribution and depth of seafloor scouring suggests that tidal flow is locally intensified by coastal geometry and bathymetric barriers, resulting in concentrated scouring where tidal flow is restricted or redirected. In addition, superimposed bedforms reflect localized variations in flow direction that have likely developed across a range of spatial and temporal scales. Evidence for extensive seafloor fluid expulsion is preserved in > 8500 pockmarks mainly located within the inner and central QCS. The size and spatial distribution of pockmarks suggest multiple fluid sources in the region. The cumulative anthropogenic footprint on the seafloor within QCS represents 6.4 km2 (∼1.5%) of the total seafloor area and is predominantly related to maritime activities including anchor dragging (47.5%) and mooring blocks (24%). This study provides a unique example of the information that can be revealed by a comprehensive survey programme that mapped from the land-water interface to the subtidal zone. Results presented in this study form a robust basis upon which to develop improved hydrodynamic models and benthic habitat maps and to assess the full extent of anthropogenic activities in the shallow marine realm.

This paper is based on a multidisciplinary field and laboratory study of carbonate concretions developed in poorly lithified Quaternary, syn-kinematic sediments along the Quattro Castella Anticline, Northern Apennines, Italy. The studied concretions consist of both tabular (parallel to bedding) and elongate single to coalescent concretionary bodies oriented at different angles to the bedding throughout the exposed stratigraphic succession. The dimensions of the concretions range from a few centimetres for single elongate concretions up to several metres for tabular to coalescent concretions. Field observations and petrophysical data indicate that the concretions developed preferentially in sediments characterized by mean grain sizes of 90–290 μm and a permeability ranging from 7 × 102 to 7 × 104 mD. Carbon and oxygen stable isotope analyses in conjunction with the petrographic investigations indicate that the precipitation of concretionary calcite occurred in a meteoric vadose realm during early eogenesis and subsequently in a meteoric phreatic environment. Diagenetic data and concretion patterns in syn-tectonic sediments suggest they formed during the lateral propagation of the anticline, which, in turn, promoted a change in the local topographic–hydraulic gradient from fold axial parallel to fold orthogonal. The integrated analysis of carbonate concretions provides a useful tool with which to unravel the palaeo-fluid flow history and therefore to predict fluid circulation patterns in folded siliciclastic rocks. Supplementary material: Complete isotopic data from both hand samples and thin sections, together with statistical analysis, scanning electron microscope cement images and grain size distributions with the standard operative procedure tests performed, and detailed permeability measurements are available at https://doi.org/10.6084/m9.figshare.c.4087019

In north-central Alberta and adjacent British Columbia, clastic strata of the middle to late Albian Peace River and Shaftesbury formations were deposited in alluvial to shallow marine environments across the foredeep of the Western Canada Foreland Basin. A high-resolution, log and core-based allostratigraphic framework for the Paddy Member of the Peace River Formation established nine allomembers, PA to PI, bounded by flooding surfaces and apparently equivalent non-marine surfaces. Within the estimated 2 Myr. duration of the Paddy, allomembers allow the evolving palaeogeography and changing relationship between accommodation and sedimentation rates to be analysed on time-steps on the order of 105 yrs. Paddy strata fill an arcuate depocentre ~ 300 km wide, across which the rocks thin eastward from 125 m to ~ 5-10 m. The northern part of the basin is occupied by muddy, offshore marine deposits that pass abruptly southward into a linear, WSW-ENE-trending body of sandstone deposited in a wave-dominated barrier-strandplain, at least 350 km long. Extending > 200 km to the south of the strandplain was a region of shallow brackish to freshwater lagoons and lakes that graded to the SW into alluvial facies. Within the lagoon region, few m thick, elongate and patchy sandstones represent river dominated deltas. In allomembers PA to PG, these sandstones are concentrated in the west and south, implying supply from the western Cordillera. In allomembers PH and PI, sandstones are mainly in the east and have a distinctive, quartz-rich composition. They can be correlated eastward into the coeval Pelican Formation, and were probably sourced from the Canadian Shield on the opposite side of the basin. In the western foredeep, alluvial rocks comprise aggradational, unconfined floodplain deposits with ribbon sandstones, dissected, on at least nine separate levels, by paleovalleys that are confined to the proximal foredeep. Valleys are 10-20 m deep, few km-wide, and filled with multi-storey channel-bars of pebbly coarse sandstone or conglomerate. Valleys cut down from well-developed interfluve palaeosols that record a falling and then rising water table. Alternating aggradation and degradation, and advance and retreat of the alluvial gravel front is attributed to cycles of varying rainfall intensity, rather than tectonism or eustasy. Apparently coeval transgressive-regressive successions in the lagoon and marine regions are attributed to few-m scale eustatic changes. On the NE margin of the basin, tidal sandstone fills a northward-opening estuary cut on the basal Paddy unconformity. This sandstone contains the first well-documented specimens of Gnesioceramus comancheanus (Cragin), proving contemporaneity with at least part of the marine Joli Fou Formation to the east. Paddy allomembers change shape upward from short blunt wedges, through more acutely tapered wedges, to sheets. This change reflects initially rapid flexural subsidence, attributed to active thickening of the adjacent orogenic wedge. A waning rate of deformation permitted wider dispersal of sediment across the basin, driving broad isostatic subsidence beneath increasingly sheet-like rock bodies. A major hiatal surface, VE3, records non-deposition or subtle erosion attributed to erosional unloading and uplift of the adjacent orogen. A subsequent marine transgression is attributed to renewed thickening of the tectonic wedge that triggered deposition of marine mudstone that thickens westward from 0 to > 110 m over 300 km. A postulated Milankovitch-band climatic control on both local gravel supply (via fluctuating rainfall), and shoreline movement (via ?Antarctic glacio-eustasy or groundwater storage), might account for cycles of alternating incision and aggradation in the alluvial realm. The same mechanism may also explain why shallow marine units such as the Cretaceous Viking and Cardium formations contain abundant conglomerate in lowstand shoreface deposits (higher river discharge), yet have highstand shorelines dominated by sandstone (lower river discharge). This article is protected by copyright. All rights reserved.

Ancient barrier islands are poorly understood relative to other clastic depositional environments, despite being prominent features along modern coastlines and important for understanding transgressive shoreline deposits. A new dataset of ancient barrier island dimensions (n=83 examples) addresses this knowledge gap with a quantitative analysis of barrier island sand body dimensions including thickness (vertical), length (shore-parallel direction), and width (shore-perpendicular direction). This dataset of barrier island deposits was compared to planform measurements made for modern islands (n=274), to investigate possible scaling relationships and other aspects of modern to ancient linkages. These measurements are nuanced and challenging to perform, and first-pass comparisons show that modern barrier islands should not be used as direct analogs for ancient systems. Nevertheless, results emphasize key depositional and preservation processes, and the dimensional differences between deposits formed over geologic versus modern time scales. Using the methods outlined herein, barrier island deposits appear to be 2-5x longer (p50 modern = 10.7 km; p50 ancient = 20.0 km), and 6-15x wider (p50 modern = 1.2 km; p50 ancient = 7.3 km) than modern barrier islands. We interpret the results to indicate that ancient barrier islands are time-transgressive deposits recording vertical amalgamation, and barrier island growth by lateral accretion, and progradation. When comparing single barrier islands, thickness measurements do not vary systemically between modern and ancient examples, suggesting that local accommodation dictates barrier island thickness as a preservation control. Gross length, width, and thickness measurements are too coarse for robust paleomorphodynamic calculations, therefore more detailed sub-environment analysis (e.g., upper shoreface delineation), with improved facies models, is required before rigorous quantifications can be generated. However, these initial comparisons do show scaling trends between length and width which could be leveraged, with caution, in the interim. As sea levels continue to rise, understanding barrier island motion and preservation will be central to predicting coastal change. Keywords: paleomorphodynamics, barrier island, scaling relationships, accommodation, shallow marine, dimension prediction, modern analog, reservoir, transgressive

Lithofacies and ichnological features of the Coniacian deposits of the upper part of Żerkowice Member and lowest part of the overlying Czerna Formation in southeastern part of the North Sudetic Synclinorium are described and their sedimentary palaeoenvironment is interpreted. The study confirms a shallow-marine to paralic/paludine palaeoenvironment. Sedimentation of the Żerkowice Member occurred in an upper shoreface environment dominated by waves, tidal currents and wave-generated alongshore currents, with an episodic encroachment of foreshore zone and shoal-water deltas. The interpretation is supported by a high-diversity assemblage of trace fossils with 21 ichnogenera, representing a stressed expression of the Skolithos Ichnofacies dominated by Ophiomorpha nodosa and a proximal expression of the Cruziana Ichnofacies with Thalassinoides and rare specimens of diverse other ichnotaxa. Sedimentation of the Czerna Formation commenced after a stasis, with at least a local hiatus caused by emergence, and proceeded in a laterally and vertically more varied environment, with transgressive coastal lagoons evolving into freshwater lakes and marshes and with a repetitive regressive intrusion of shoreface and shoal-water deltas. The emergence of the area is recorded by coal-bearing deposits with plant-root traces. Local occurrence of the Teredolites Ichnofacies in coal (peat) deposits above the base of the Czerna Formation indicates renewed marine flooding. Continuation of the latter is locally evidenced by a trace-fossil assemblage with 17 ichnogenera, representing proximal expression of the Cruziana Ichnofacies followed by distal expression of the Skolithos Ichnofacies in the overlying transgressive–regressive cyclothems. The palaeoenvironmental changes recorded by the sedimentary succession indicate bathymetric fluctuations and imply considerable shoreline shifts and palaeogeographic changes in the basin. These changes are interpreted as a combined signal of 2nd- and 3rd-order eustatic cycles, modified and partly obliterated by the effects of intrabasinal tectonic forcing and by palaeogeographically controlled variation in sediment supply.

The Marwar Supergroup of the Bikaner-Nagaur Basin is composed of sediments deposited from the late Neoproterozoic (Ediacaran) to Upper Cambrian. The Nagaur Sandstone Formation of the Nagaur Group (uppermost division of the Marwar Supergroup) preserves trace fossils significant for establishing Early Cambrian biostratigraphic zones and depositional facies. Fifteen ichnospecies (and eight ichnogenera) identified in the Nagaur Sandstone Formation include “ Treptichnus” pedum , Cruziana cf . tenella , Cruziana isp., Diplichnites ispp. A, B, and C, Gyrophyllites isp., Lockeia isp., Merostomichnites isp., Monomorphichnus gregarius isp. nov., Monomorphichnus isp., Planolites isp. , Psammichnites isp., Rusophycus bikanerus isp. nov., Rusophycus cf. carbonarius , Rusophycus isp. and radial trace fossils. These trace fossils belong to ethological categories pascichnia, repichnia, cubichnia, and fodinichnia and represent arthropod and worm-like burrowing biota. The assemblage and a regional comparison with contemporaneous trace fossils in the eastern Gondwanan realm suggest that the sequence in the study area belongs to the Cruziana tenella Ichnozone and to Stage 2 (upper part of Terreneuvian), however the Middle Cambrian is not excluded. The trace fossil assemblage belongs to the archetypal Cruziana ichnofacies. Cross bedded sandstone, mud cracks and rainprints in the ichniferous strata of the Nagaur Sandstone Formation indicate deposition in an intertidal sand flat with channels that was exposed episodically.

WorldView-2 sensor, which was launched in October 2009 represents a new achievement in geographic information systems, especially in the marine field. Differences WorldView-2 sensor with sensor-owned satellite that has gone before is located on four new band that has the coastal band, yellow band, red edge band, and near-IR 2 band. Coastal band sensors are specifically designed for applications in the littoral zone or shallow sea. This is very helpful in mapping the depth or bathymetry. This is not only important for navigational purposes but also in seeing the shipping processes of coastal disaster mitigation planning and even in coastal areas such as tsunami and storm surge. This paper gives an overview of how the application of WorldView-2 imagery for mapping shallow sea bathymetry can be done based on methods and approaches that has been already available for the other sensor.

It is well known that nowadays as well as in the past the vast majority of human habitation and activities are mainly concentrated in littoral areas. Thus the increased attention to coastal zone management contributed to the development and implementation of shallow-water mapping approaches for capturing current environmental conditions. During the last decade, geophysical imaging techniques like electrical resistivity tomography (ERT) have been used in mapping onshore buried antiquities in a non-destructive manner, contributing to cultural heritage management. Despite its increased implementation in mapping on-shore buried archaeological remains, ERT has minimal to non-existent employment for the understanding of the past dynamics in littoral and shallow off-shore marine environments. This work presents the results of an extensive ERT survey in investigating part of the Hellenistic to Byzantine submerged archaeological site of Olous, located on the north-eastern coast of Crete, Greece. A marine area of 7100 m2 was covered with 178 densely spaced ERT lines having a cumulative length of 8.3 km. A combination of submerged static and moving survey modes were used to document potential buried and submerged structures. The acquired data from the marine environment were processed with two-dimensional and three-dimensional inversion algorithms. A real time kinematic global navigation satellite system was used to map the visible submerged walls and compile the bathymetry model of the bay. The adaptation of ERT in reconstructing the underwater archaeological remains in a shallow marine environment presented specific methodological and processing challenges. The in situ experience from the archaeological site of Olous showed that ERT provided a robust method for mapping the submerged archaeological structures related to the ancient built environment (walls, buildings, roads), signifying at the same time the vertical stratigraphy of the submerged sediments. The inherent limitation of employing ERT in a conductive environment is counterbalanced by the incorporation of precise knowledge for the conductivity and bathymetry of the saline water in the modelling and inversion procedure. Although the methodology definitely needs further refinement, the overall outcomes of this work underline the potential of ERT imaging being integrated into wider shallow marine projects for the mapping of archaeological sites in similar environmental regimes.

Knowledge of basic data variability is essential for the interpretation of any proxy-based paleotemperature record. To evaluate this for δ18O stable isotope paleothermometry based on early Paleogene fish otoliths from marginal marine environments, an intra- and interspecific stable O and C isotope study was performed at a single locality in the southern North Sea Basin (Ampe Quarry, Egem, Belgium), where shallow marine sands and silts are exposed. The age of the deposits is early late Ypresian (ca. 50.9 Ma) and falls within the early Eocene climatic optimum (EECO) interval. In each of four fossiliferous levels sampled, the same three otolith species were analyzed (Platycephalus janeti, Paraconger papointi and “genus Neobythitinorum” subregularis). Intrataxon stable isotope spread amounts on average 2.50-3.00‰ for all taxa and is present in all levels. This implies that each sample level comprises substantial variability, which can be attributed to a combination of temporal and taphonomic effects. More importantly, intertaxon offsets of 4.60‰ in δ13C and 2.20‰ in δ18O between the mean values of the three otolith species are found, with “N.” subregularis representing more positive values relative to the other species. We hypothesize that freshwater influence of coastal waters is the most likely cause for these discrepancies. Similar analyses on two coastal bivalve species (Venericardia sulcata and Callista laevigata) corroborate this hypothesis. Accordingly, δ18O values measured on “N.” subregularis otoliths probably represent a more open oceanic signal, and therefore seem well-suited for δ18O stable isotope paleothermometry. This study highlights the importance of investigating data variability of a biogenic carbonate paleotemperature proxy at the species level, before applying paleotemperature equations and interpreting the outcome. ispartof: Austrian Journal of Earth Sciences vol:105 issue:1 pages:200-207 ispartof: location:Salzburg status: published