Search

We present quadrature-assisted discrete demodulation, which circumvents constraints imposed on the repetition rate by lock-in detection. The method enables pseudo-heterodyne near-field microscopy with kHz fs laser systems.

Two-dimensional electronic spectroscopy (2DES) has recently been gaining popularity as an alternative to the more common transient absorption spectroscopy due to the combination of high frequency and time resolution of 2DES. In order to advance the reliable analysis of population dynamics and to optimize the time resolution of the method, one has to understand the numerous field matter interactions that take place at an early and negative time. These interactions have historically been discussed in one-dimensional spectroscopy as coherent artifacts and have been assigned to both resonant and non-resonant system responses during or before the pulse overlap. These coherent artifacts have also been described in 2DES but remain less well-understood due to the complexity of 2DES and the relative novelty of the method. Here, we present 2DES results in two model nanocrystal samples, CdSe and CsPbI3. We demonstrate non-resonant signals due to solvent response during the pulse overlap and resonant signals, which we assign to perturbed free induction decay (PFID), both before and during the pulse overlap. The simulations of the 2DES response functions at early and negative time delays reinforce the assignment of the negative time delay signals to PFID. Modeling reveals that the PFID signals will severely distort the initial picture of the resonant population dynamics. By including these effects in models of 2DES spectra, one is able to push forward the extraction of early time dynamics in 2DES.

The microscopic origin and timescale of the fluctuations of the energies of electronic states has a significant impact on the properties of interest of electronic materials, with implication in fields ranging from photovoltaic devices to quantum information processing. Spectroscopic investigations of coherent dynamics provide a direct measurement of electronic fluctuations. Modern multidimensional spectroscopy techniques allow the mapping of coherent processes along multiple time or frequency axes and thus allow unprecedented discrimination between different sources of electronic dephasing. Exploiting modern abilities in coherence mapping in both amplitude and phase, we unravel dissipative processes of electronic coherences in the model system of CdSe quantum dots (QDs). The method allows the assignment of the nature of the observed coherence as vibrational or electronic. The expected coherence maps are obtained for the coherent longitudinal optical (LO) phonon, which serves as an internal standard and confirms the sensitivity of the technique. Fast dephasing is observed between the first two exciton states, despite their shared electron state and common environment. This result is contrary to predictions of the standard effective mass model for these materials, in which the exciton levels are strongly correlated through a common size dependence. In contrast, the experiment is in agreement with ab initio molecular dynamics of a single QD. Electronic dephasing in these materials is thus dominated by the realistic electronic structure arising from fluctuations at the atomic level rather than static size distribution. The analysis of electronic dephasing thereby uniquely enables the study of electronic fluctuations in complex materials.

Strong confinement in semiconductor quantum dots enables them to host multiple electron–hole pairs or excitons. The excitons in these materials are forced to interact, resulting in quantum-confined multiexcitons (MXs). The MXs are integral to the physics of the electronic properties of these materials and impact their key properties for applications such as gain and light emission. Despite their importance, the electronic structure of MX has yet to be fully characterized. MXs have a complex electronic structure arising from quantum many-body effects, which is challenging for both experiments and theory. Here, we report on the investigation of the electronic structure of MX in colloidal CdSe QDs using time-resolved photoluminescence, state-resolved pump–probe, and two-dimensional spectroscopies. The use of varying excitation energy and intensities enables the observation of many signals from biexcitons and triexcitons. The experiments enable the study of MX structures and dynamics on time scales spanning 6 orders of magnitude and directly reveal dynamics in the biexciton manifold. These results outline the limits of the simple concept of binding energy. The methods of investigations should be applicable to reveal complex many-body physics in other nanomaterials and low-dimensional materials of interest.

The electronic structure of multiexcitons significantly impacts the performance of nanostructures in lasing and light-emitting applications. However, these multiexcitons remain poorly understood due to their complexity arising from many-body physics. Standard transient-absorption and photoluminescence spectroscopies are unable to unambiguously distinguish effects of sample inhomogeneity from exciton-biexciton interactions. Here, we exploit the energy and time resolution of two-dimensional electronic spectroscopy to access the electronic structure of the band-edge biexciton in colloidal CdSe quantum dots. By removing effects of inhomogeneities, we show that the band-edge biexciton structure must consist of a discrete manifold of electronic states. Furthermore, the biexciton states within the manifold feature distinctive binding energies. Our findings have direct implications for optical gain thresholds and efficiency droop in light-emitting devices and provide experimental measures of many-body physics in nanostructures.

Semiconductor nanocrystals emit light from excitons confined to their core, as well as from their surfaces. Time-resolving the emission from the core yields information on the band edge exciton, which is now well understood. In contrast, the emission from the surface is ill-characterized and remains poorly understood, especially on long time scales. In order to understand the kinetics of charge trapping to the surface and electronic relaxation within the surface, we perform time-resolved emission spectroscopy on CdSe nanocrystals with strong surface emission. The time-resolved spectra reveal a time scale of electron transfer from core to surface much slower than previously thought. These spectra also unveil electron dynamics in the surface band, which gives rise to an average lifetime spectrum. These dynamics are explained by invoking two surface states. This simple model further rationalizes the role of ligands in tuning the surface emission of nanocrystals. These experimental results provide a critical ...

Lead-halide perovskites have attracted tremendous attention, initially for their performance in thin film photovoltaics, and more recently for a variety of remarkable optical properties. Defect tolerance through polaron formation within the ionic lattice is a key aspect of these materials. Polaron formation arises from the dynamical coupling of atomic fluctuations to electronic states. Measuring the properties of these fluctuations is therefore essential in light of potential optoelectronic applications. Here we apply two-dimensional electronic spectroscopy (2DES) to probe the timescale and amplitude of the electronic gap correlations in CsPbI3 perovskite nanocrystals via homogeneous lineshape dynamics. The 2DES data reveal irreversible, diffusive dynamics that are qualitatively inconsistent with the coherent dynamics in covalent solids such as CdSe quantum dots. In contrast, these dynamics are consistent with liquid-like structural dynamics on the 100 femtosecond timescale. These dynamics are assigned to the optical signature of polaron formation, the conceptual solid-state analogue of solvation., Lead-halide perovskites have promising optoelectronic properties, determined by interplay of electronic and structural properties. Here the authors probe CsPbI3 nanocrystals by two-dimensional electronic spectroscopy, showing liquid-like structural dynamics signature of polaron formation.

We report on the performance of Ar-filled hollow-core fibers (HCFs) capillary driven by long pulses ( > 100 fs) of moderate energy ( < 600 μ J) for coherent multidimensional spectroscopy in the visible range. The source is characterized by high overall transmission and excellent spatial mode. Broadening is achieved by self-phase modulation. Notably, the uncompressed visible output is shorter than the input pulse. This peculiar observation is explained by the structure of self-phase modulated pulses, coupled with spectral filtering. By virtue of its simplicity, low requirements, spectral stability, and the excellent properties of its spatial output, HCFs can provide an interesting alternative to achieve broadband visible pulses for broadband optical excitation and multidimensional spectroscopy applications.

We present a detailed analysis of a setup capable of arbitrary amplitude, phase, and polarization shaping of broadband visible femtosecond pulses at 1 kHz via a pair of actively phase stabilized acousto-optic programmable dispersive filters arranged in a Mach-Zehnder interferometer geometry. The setup features phase stability values around λ/225 at 580 nm as well as degrees of polarization of at least 0.9 for any polarization state. Both numbers are important metrics to evaluate a setup's potential for applications based on polarization-shaped femtosecond pulses, such as fully coherent multi-dimensional electronic spectroscopy.

Molecular glasses constitute an appealing class of materials combining the advantages associated with small molecules with the potential to form glassy phases. However, the current design of functional molecular glasses is highly dependent on a trial and error approach. By achieving a better understanding of the microscopic behaviors that govern the propensity of a system to generate a glassy state, the glassy behavior of new molecules can be identified before their synthesis. Full-atomistic simulation is genuinely invaluable for achieving this goal. A series of functionalized triazine-based molecular glasses previously synthesized and characterized were thus used as models to carry out simulations. To estimate the link between microscopic calculations and macroscopic properties, mechanical equilibrium and isotropy have first to be achieved. The reproducibility of the simulation results and their linear correlations with experimental data are two essential criteria for corroborating the validity of our method. Mobility of the core and the functional “headgroups” can then be interpreted, rationalizing the effect of molecular structure on the formation of glasses, and on the important differences in Tg observed for this series of compounds.

Polymer nanocrystals have attracted considerable attention because of their potential applications in future technology and their fascinating properties which differ from those of corresponding bulk materials. The essential influence of the nanointerface in nanocrystals is apparent in the linear dependence of the melting temperature with the inverse sheet thickness, i.e. the Gibbs–Thomson behaviour. Yet, few experimental and theoretical works have been attempted to highlight the influence of nanointerfaces on the thermal properties of nanocrystals. In this work, simulations were used to evaluate the melting temperature of crystalline polymer nanosheets. Ensuing results were compared favourably to experimental melting temperatures stemming from alkane chains and functional polyolefins, thus validating our simulation approach. Both experimental and simulated results followed Gibbs–Thomson behaviour and a procedure was devised to extract the heat of melting as well as the surface energy from these results. Thus, surface energy of various nanocrystals was found to be widely different for various experimental systems, demonstrating the significance of the environment on thermal properties of nanocrystals.

Ultrafast coherent multi-dimensional spectroscopies form a powerful set of techniques to unravel complex processes, ranging from light-harvesting, chemical exchange in biological systems to many-body interactions in quantum-confined materials. Yet these spectroscopies remain complex to implement at the high frequencies of vibrational and electronic transitions, thereby limiting their widespread use. Here we demonstrate the feasibility of two-dimensional spectroscopy at optical frequencies in a single beam. Femtosecond optical pulses are spectrally broadened to a relevant bandwidth and subsequently shaped into phase coherent pulse trains. By suitably modulating the phases of the pulses within the beam, we show that it is possible to directly read out the relevant optical signals. This work shows that one needs neither complex beam geometries nor complex detection schemes in order to measure two-dimensional spectra at optical frequencies. Our setup provides not only a simplified experimental design over standard two-dimensional spectrometers but its optical readout also enables novel applications in microscopy.

We report on a setup for coherent multidimensional spectroscopy based on visible continuum generation obtained by propagating 130 fs

The effect of shearing on Nafion/water systems was investigated using Dissipative Particle Dynamics (DPD). This simulation approach has been shown to accurately reveal the morphology of such systems in the steady state. We first confirmed that the length of the Nafion chain, 5 and 20 DPD units, has no influence on the overall morphology for four different concentrations, 10, 20, 30, and 40%, of water. Shearing effects with 0.05 and 0.2 rates were then studied according to the Nafion chain length, 5 and 20 DPD units, and water content, 10 and 30%. It was shown that low water contents and long chain length lead to the formation of water-rich tubes, aligned with the shear direction. The formation of such channels can ultimately lead to an increase in the proton conductivity at low humidity. The size of these water tubes thus results from a combined influence of shear strain, chain relaxation time, interfacial tension and water content.