Search

Background: Posterolateral corner (PLC) reconstruction of the knee involves precise drilling of a single tunnel from anterolateral to posteromedial in the fibular head (FH) to ensure adequate graft fixation. Misplacement of the tunnel in a too lateral or too superior trajectory can lead to cortical breach and inadequate graft fixation. Purpose: To (1) determine the mechanical consequence of a lateralized FH tunnel in PLC reconstruction and (2) compare the mechanical strength of 3 salvage fixation techniques for a lateralized FH tunnel. Study Design: Controlled laboratory study. Methods: Sawbones models of a uniform density were utilized. FH tunnels (7-mm diameter) were drilled from anterolateral to posteromedial in positive controls (lateral cortex thickness, 7.6 ± 0.7 mm) to represent an improperly placed FH tunnel at risk of lateral cortical breach. For negative controls and salvage experimental groups, FH tunnels were drilled from anterolateral to posterolateral (lateral cortex thickness, 2.7 ± 0.9 mm). Three salvage fixation techniques were compared: suture anchor fixation, tunnel redrilling, and nitinol staple fixation. Samples (n = 5 per group) underwent uniaxial tension testing, and the ultimate tensile strength (UTS) and mode of failure were recorded. Data were analyzed using the 1-sample t test and nonparametric 1-sample Wilcoxon signed-rank test. Results: The negative control group had a 4-fold lower mean UTS relative to the positive control group (1.49 ± 0.17 vs 6.25 ± 1.98 MPa; P < .01) and exhibited failure through the lateral cortex and tunnel. Nitinol staple fixation improved the mean UTS by >16 times compared with the negative control group (24.06 ± 6.49 vs 1.49 ± 0.17 MPa; P < .01). Suture anchors and tunnel redrilling exhibited similar UTS and mode of failure to those of negative controls. Conclusion: Reinforcement of a thinned lateral FH cortex with a single nitinol staple improved graft fixation strength in a sawbones model. Clinical Relevance: A lateralized FH tunnel can be a common intraoperative pitfall during PLC reconstruction. Salvage of a thinned lateral FH cortex with a single nitinol staple may reduce the risk of cortical breach and graft failure.

Glimpse of fish as perishable staple was reviewed. Fish is an important animal protein as it supplies good quality protein, vitamins and minerals. It is however highly perishable and spoils quickly, bad fish handling after harvesting, inadequate storage and processing facilities also contributes to fish spoilage in developing countries thus causing a lacuna between fish demand and supply, thus posing a great challenge to food security. Processing of fish facilitates its maximal use as for value-added fish products. Smoking is the preservation method most adopted in many developing countries to extend fish shelf life. Fish post-harvest loss come in different faces including: physical loss, quality loss and market forces loss all of which will lead to reduction in fish shelf life. Antimicrobial properties of plant extracts and proper packaging can extend fish shelf life. There in need to encourage women participation in fisheries subsector as their active role is essential to fighting poverty and ensuring food security within many households.

Purpose The aim of this study was to analyze the results of two different methods of surgical treatment of waist scaphoid nonunions (SNUs). We retrospectively analyzed data from 87 patients referred to our department from January 2010 to December 2017 who were surgically treated for waist SNU. Methods The mean period of time passed from trauma was 11.2 (±5.6) months. Patients were divided into two groups based on surgical treatment received: volar exposure osteosynthesis with shape memory staple (SMS) (group A) and volar exposure osteosynthesis with SMS and gelled platelet-rich plasma (GPRP) application at the bone defect level (group B). A cast (thumb excluded) was maintained for 4 weeks. Healing was checked clinically (pain, QuickDASH [Disabilities of the Arm, Shoulder, and Hand] score, Mayo Wrist Score) and radiologically (standard X-ray). Results Union was achieved in 40 patients in group A (95.2%) and in all patients in group B (45 patients; 100%). A statistically significant difference was observed in the improvement of the Mayo Wrist Score, QuickDASH score, and pain (measured through the visual analog scale) after 3 months from surgery (p = 0.02). Conclusion SMS is effective in treating waist SNU at more than 6 months from trauma. GPRP application can improve bone healing and upper limb function. Level of Evidence This is a retrospective observational Level III study.

First metatarsophalangeal (MTP) joint arthrodesis is a surgical procedure in which the first metatarsal head is fused to the proximal phalanx of the great toe in order to permanently stiffen the first MTP joint. It was originally proposed as a treatment for severe cases of hallux valgus deformity, but the procedure’s indications and utilization have expanded since its initial development. Despite a wide variety of indications, first MTP arthrodesis has been shown to have reliable, satisfactory outcomes. As a result, the development of a wide array of surgical approaches, joint preparation techniques, and fixation devices used in the procedure has occurred. In this narrative review, we highlight the evolution of fixation constructs used in first MTP arthrodesis in order to provide a frame of reference for the various types of fixation constructs available.

A first ray dorsiflexion osteotomy is commonly performed for cavovarus foot correction. There are multiple techniques to fix this osteotomy, ranging from wires, screws, and plates or a combination of these. We present our results using a varisation staple (Biomet©) as an alternative fixation device. We performed a retrospective outcome analysis of a consecutive series of 10 cavovarus feet that underwent a dorsiflexion osteotomy (dorsal closing wedge) of the first metatarsal fixed with two varisation staples. The results were measured at a mean three monthly follow-ups and included union and complication rates, as well as clinical and radiographic assessment of cavus deformity correction. There was a 100% union rate with no complications or cases of delayed union. No metalwork removal was requested in any case at follow-up. First ray dorsiflexion osteotomies are most commonly fixed using a 3.5mm cortical screw. We demonstrate that our alternative and novel technique using varisation staples achieved a 100% union rate while avoiding the prominent hardware complications known to occur with cortical screws or plates.

Background Evaluation of the Zip surgical skin closure device (Zip) versus metal staples regarding patient satisfaction and cosmesis after total knee arthroplasty (TKA). Methods Patients undergoing TKA at Einstein Medical Center Montgomery were randomized to receive skin closure using Zip or staples. Patient satisfaction was assessed by surveys at discharge, three weeks and six weeks post-operatively. Cosmesis according to patients and observers was assessed using the Patient and Observer Scar Assessment Scale (POSAS). Results Randomization resulted in 21 Zip and 20 staple patients. Two subjects were lost to follow-up and one patient suffered cardiac arrest. Surgeon satisfaction favored Zip over staples on day of surgery and patient discharge. At three weeks, Zip was favored over staples for patient-reported movement and device removal pain. Patient satisfaction results favored Zip for comfort, ease of wound care, and hospital selection based on wound closure. POSAS favored Zip for appearance, pain, itching, color, stiffness, thickness, irregularity, vascularity, pigmentation, relief, pliability, surface area, and observer opinion. Subject opinion resulted in no difference between groups. At six weeks, no differences were found for patient-rated movement pain or ease of wound care. POSAS favored Zip for color, stiffness, thickness, vascularity, pigmentation, thickness, relief, pliability, surface area and observer opinion. Conclusion Satisfaction with the closure method and patient and physician assessments of cosmesis were superior with Zip. Orthopedic surgeons strive to optimize TKA patient satisfaction. Skin closure can influence patient satisfaction as the memory of their recovery fades and the scar remains the most visible reminder of their experience.

The aim of this study was to make a comparison between the tissue fusion technique and conventional methods for sealing bowel anastomosis. Eighteen female domestic pigs (Suidae, Sus) were used in our study. Tissue-fused anastomoses (LigaSure groups) were made in 13 animals (5 anastomoses per animal), which were subdivided into 4 groups according to different manufacturing settings: “LigaSure-L-1” and “LigaSure-L-2”, with low energy output level with 1 or 2 device-activated tissue sealing times, and “LigaSure-M” and “LigaSure-H”, with medium or high energy output level. As controls, automatically stapled (GIA group) and hand-sewn (suture group) anastomoses were utilized in 3 and 2 animals, respectively. There was no statistical difference in the overall leakage rate between the GIA group (6.7%) and the LigaSure groups (15%) (P=1.000). There was less proliferating epithelium covering the anastomosis gap in the LigaSure groups compared with the other two groups. The gap between the two extremities of muscular layers of the anastomosis in the LigaSure groups was filled with collagen fibers. More proliferating cell nuclear antigen (PCNA)-positive cells were found in the anastomoses of the LigaSure groups compared with the other two groups (P=0.010). Our results showed that the tissue fusion technology was a feasible and safe method for anastomoses.

Background & Objective: Chronic pain occurs in 20–30% of patients after hernia surgery. As a consequence of this chronic pain, almost one third of patients have limitations in daily activities. Frequency and severity of this pain varies with different techniques of hernia repair. The objective of this study was to compare polypropylene suture and skin staples for securing mesh in uncomplicated ventral hernioplasty in terms of acute and chronic postoperative pain and to compare the time taken for mesh fixation between polypropylene sutures and skin stapler in ventral hernioplasty. Methods: This study was conducted in Surgery Department of Dow University Hospital, Dow University of Health Sciences, Ojha Campus and included 53 patients from Jan 2015 to Dec 2016, after taking informed consent. All patients were operated under general anesthesia by the same surgical team. Patients were randomized into two groups; in one group mesh fixed with 2/0 polypropylene suture while in other group mesh stapler was used. Time taken to apply mesh was noted in minutes from laying the mesh over anterior rectus sheath to completion of fixation by either method. The severity of post-operative pain was measured with VAS (1-10) after one week, one month and after one year after surgery. Data was analysed using SPSS version 17. Results: Patient characteristics and operative outcome were similar in the two groups and statistically non-significant in both. Early postoperative pain was more after suture fixation but it was not statistically significant. Mean ± SD pain score was after one week 3.47±2.7 after sutures while 2.91±1.88 after stapler. After four weeks, 0.40±0.49 after suture while 0.35±0.48 after stapler fixation. In both study groups 30–34% of the patients felt some pain in follow-up after one year. Severity of pain was 0.60±0.62 after suture while 1.65±1.94 after stapler fixation which is statistically significant as well (p

In this work, a new NiTi shape memory alloy (SMA) bone fixator is proposed. Thanks to the shape memory effect, this device does not need any external tool for the fixation, as the anchorage is obtained only by the self-accommodation of the clip during the parent transformation. Calorimetry and thermo-mechanical tests were used to evaluate the phase transformation temperatures and to estimate the forces generated both during the fixing surgical procedure and after the surgical operation. An application on animal anatomical sample was also performed; an appropriate mechanical tightness as well as a good handiness has been found. (C) 2014 Elsevier B.V. All rights reserved.

Background The field of orthopaedics is a constantly evolving discipline. Despite the historical success of plates, pins and screws in fracture reduction and stabilisation, there is a continuing search for more efficient and improved methods of fracture fixation. The aim of this study was to evaluate shape-memory staples and to compare them to a currently used implant for internal fracture fixation. Multi-plane bending stability and interfragmentary compression were assessed across a simulated osteotomy using single and double-staple fixation and compared to a bridging plate. Methods Transverse osteotomies were made in polyurethane blocks (20 × 20 × 120 mm) and repairs were performed with one (n = 6), or two (n = 6) 20 mm nitinol staples, or an eight-hole 2.7 mm quarter-tubular plate (n = 6). A pressure film was placed between fragments to determine contact area and compressive forces before and after loading. Loading consisted of multi-planar four-point bending with an actuator displacement of 3 mm. Gapping between segments was recorded to determine loads corresponding to a 2 mm gap and residual post-load gap. Results Staple fixations showed statistically significant higher mean compressive loads and contact areas across the osteotomy compared to plate fixations. Double-staple constructs were superior to single-staple constructs for both parameters (p

A 66-year-old man with postsigmoidectomy status for colon cancer received laparoscopic partial hepatectomy due to a hepatic mass with employing titanium clips were for a vascular clamp. Histological examination showed liver metastasis from sigmoid colon cancer. Twenty-nine months after the partial hepatectomy, a mass developed on the stump at the hepatic resection. Laparoscopic left lateral segmentectomy was conducted under suspicion of cancer recurrence and an automatic titanium stapling device was used. The macroscopically cut surface of the liver showed a grey-white solid nodule measuring 23 x 20 mm and involving metal clips. The nodule was consistent with granuloma microscopically. Twenty-three months after the segmentectomy, a mass reappeared on the hepatic radial margin and an open left lateral hepatic lobectomy was performed because of its growth tendency. Histopathological examination revealed granuloma similar to the previous instance. Since these nodules formed a granulomatous lesion surrounding metal staples/clips and evidence of caseous necrosis was lacking, granuloma due to surgical staples/clips was suspected. Sporadic case reports of postoperative pulmonary granuloma at the staple line have been published previously, but there are no articles detailing a case involving hepatic granuloma. We present our case as the first report of postoperative staple-line hepatic granuloma.

The aim of this study was to evaluate the impact of consensus algorithms on segmentation results when applied to clinical PET images. In particular, whether the use of the majority vote or STAPLE algorithm could improve the accuracy and reproducibility of the segmentation provided by the combination of three semiautomatic segmentation algorithms was investigated. Three published segmentation methods (contrast-oriented, possibility theory and adaptive thresholding) and two consensus algorithms (majority vote and STAPLE) were implemented in a single software platform (Artiview®). Four clinical datasets including different locations (thorax, breast, abdomen) or pathologies (primary NSCLC tumours, metastasis, lymphoma) were used to evaluate accuracy and reproducibility of the consensus approach in comparison with pathology as the ground truth or CT as a ground truth surrogate. Variability in the performance of the individual segmentation algorithms for lesions of different tumour entities reflected the variability in PET images in terms of resolution, contrast and noise. Independent of location and pathology of the lesion, however, the consensus method resulted in improved accuracy in volume segmentation compared with the worst-performing individual method in the majority of cases and was close to the best-performing method in many cases. In addition, the implementation revealed high reproducibility in the segmentation results with small changes in the respective starting conditions. There were no significant differences in the results with the STAPLE algorithm and the majority vote algorithm. This study showed that combining different PET segmentation methods by the use of a consensus algorithm offers robustness against the variable performance of individual segmentation methods and this approach would therefore be useful in radiation oncology. It might also be relevant for other scenarios such as the merging of expert recommendations in clinical routine and trials or the multiobserver generation of contours for standardization of automatic contouring.

This work aims to propose and validate a framework for tumour volume auto-segmentation based on ground-truth estimates derived from multi-physician input contours to expedite 4D-CT based lung tumour volume delineation. 4D-CT datasets of ten non-small cell lung cancer (NSCLC) patients were manually segmented by 6 physicians. Multi-expert ground truth (GT) estimates were constructed using the STAPLE algorithm for the gross tumour volume (GTV) on all respiratory phases. Next, using a deformable model-based method, multi-expert GT on each individual phase of the 4D-CT dataset was propagated to all other phases providing auto-segmented GTVs and motion encompassing internal gross target volumes (IGTVs) based on GT estimates (STAPLE) from each respiratory phase of the 4D-CT dataset. Accuracy assessment of auto-segmentation employed graph cuts for 3D-shape reconstruction and point-set registration-based analysis yielding volumetric and distance-based measures. STAPLE-based auto-segmented GTV accuracy ranged from (81.51 ± 1.92) to (97.27 ± 0.28)% volumetric overlap of the estimated ground truth. IGTV auto-segmentation showed significantly improved accuracies with reduced variance for all patients ranging from 90.87 to 98.57% volumetric overlap of the ground truth volume. Additional metrics supported these observations with statistical significance. Accuracy of auto-segmentation was shown to be largely independent of selection of the initial propagation phase. IGTV construction based on auto-segmented GTVs within the 4D-CT dataset provided accurate and reliable target volumes compared to manual segmentation-based GT estimates. While inter-/intra-observer effects were largely mitigated, the proposed segmentation workflow is more complex than that of current clinical practice and requires further development.

Introduction Intervertebral stapling is a leading method of fusionless scoliosis treatment which attempts to control growth by applying pressure to the convex side of a scoliotic curve in accordance with the Hueter-Volkmann principle. In addition to that, staples have the potential to damage surrounding bone during insertion and subsequent loading. The aim of this study was to assess the extent of bony structural damage including epiphyseal injury as a result of intervertebral stapling using an in vitro bovine model. Materials and Methods Thoracic spines from 6-8 week old calves were dissected and divided into motion segments including levels T4-T11 (n=14). Each segment was potted in polymethylemethacrylate. An Instron Biaxial materials testing machine with a custom made jig was used for testing. The segments were tested in flexion/extension, lateral bending and axial rotation at 37⁰C and 100% humidity, using moment control to a maximum 1.75 Nm with a loading rate of 0.3 Nm per second for 10 cycles. The segments were initially tested uninstrumented with data collected from the tenth load cycle. Next an anterolateral 4-prong Shape Memory Alloy (SMA) staple (Medtronic Sofamor Danek, USA) was inserted into each segment. Biomechanical testing was repeated as before. The staples were cut in half with a diamond saw and carefully removed. Micro-CT scans were performed and sagittal, transverse and coronal reformatted images were produced using ImageJ (NIH, USA).The specimens were divided into 3 grades (0, 1 and 2) according to the number of epiphyses damaged by the staple prongs. Results: There were 9 (65%) segments with grade 1 staple insertions and 5 (35%) segments with grade 2 insertions. There were no grade 0 staples. Grade 2 spines had a higher stiffness level than grade 1 spines, in all axes of movement, by 28% (p=0.004). This was most noted in flexion/extension with an increase of 49% (p=0.042), followed by non-significant change in lateral bending 19% (p=0.129) and axial rotation 8% (p=0.456) stiffness. The cross sectional area of bone destruction from the prongs was only 0.4% larger in the grade 2 group compared to the grade 1 group (p=0.961). Conclusion Intervertebral staples cause epiphyseal damage. There is a difference in stiffness between grade 1 and grade 2 staple insertion segments in flexion/extension only. There is no difference in the cross section of bone destruction as a result of prong insertion and segment motion.

Background: In open anterior inguinal mesh hernioplasty, the commonly used method for mesh fixation is by polypropylene sutures which involves extensive mesh fixation and placement of sutures into periosteum of pubic symphysis, thereby increasing the operative time with attendant risk of infection of the prosthetic material. An alternative to sutures is the use of staples which are easy to use and quick to apply. We explored the use of staples in securing the mesh in inguinal hernioplasty. Methodology: A prospective comparative study of 400 patients who underwent inguinal mesh hernioplasty with 200 patients selected randomly each in polypropylene suture (PPSG) and staple group (SG) was performed. Postoperatively patients were made ambulatory on the same day of surgery and discharged from hospital on 1st or 2nd day in both the groups. Follow-up was carried out in 1 week, 2 months, 6 months, 1 year, 2 years, and 3 years and the patients were assessed for wound infection, hematomas, local pain, return to work, recurrence if any, and other miscellaneous complications if any. Results: The mean age of patients in our study in polypropylene suture group and staple group was 46.75 years and 46 years, respectively. 80% (160 patients) in polypropylene suture group and 75% (150 patients) in stapler group had indirect hernia. The mean operative time in PPSG and SG group was 59.25 minutes and 45 minutes, respectively (p value0.05). Overall the complication rate was the same in the two groups with no statistically significant differences observed (P value >0.05). There was 0% recurrence rate in 6 months and 1 year of follow-up in both groups. However, in 3-year follow-up 20 patients (10%) in PPSG and 2 patients (1%) in SG had recurrence (P value=0.0001). Conclusion: The technique of mesh fixation with skin staples is as effective as conventional fixation with polypropylene sutures, with an important added advantage of a significant reduction in the operative time and an early return to work. At the same time this technique does not have any additional complications compared to traditional Lichtenstein method. Good tissue penetrance and effective mesh anchorage are achieved when staples are utilized to secure the mesh. [Arch Clin Exp Surg 2018; 7(1.000): 7-12]

Background A new sutureless technique has been introduced clinically to facilitate the process of vascular reconstruction and improve patency. The Vessel Closure System (VCS) is nonpenetrating, creates an elastomeric everted anastomosis, and is easily and reproducibly applied. The objective of this report is to review the published world experience that has accrued regarding these clips with attention to the assets, liabilities, and pitfalls associated with the new technology. Data sources Medline search and manual cross-referencing were performed, after which 61 original articles were identified on the use of VCS clips for vascular anastomoses. Results Advantages of the clips compared with sutures include the technical ease of application, the reduced anastomotic time, the superior hemodynamics, and the improved healing pattern of the anastomosis. Disadvantages include the potential problems in atherosclerotic vessels, lack of prospective randomized long-term follow-up, and initial costs. The best clinical results have been achieved in microvascular repair, as well as with vascular access and transplantation surgery. Conclusions The VCS clip technology has become an accepted vascular anastomosing technique, which in future could lead to the use of clips as a standard approach and the use of sutures only in case of severe atherosclerosis and other circumstances in which vessel edges are difficult to evert.

There has been dramatic resurgence of interest in surgical treatment of emphysema, particularly "lung volume reduction" procedures. Recent studies have demonstrated improvements in pulmonary function, lung mechanics, exercise tolerance, and quality of life in selected patients following volume reduction procedures. However, considerable uncertainty remains regarding overall benefit, optimal patient selection, operative techniques, and duration of response. This summarizes current approaches to lung volume reduction surgery, available clinical outcome information, selection criteria, and physiologic mechanisms of response, and discusses the potential role for surgical volume reduction in treatment of emphysema. Recent data appear to support the efficacy of bilateral staple lung volume reduction surgery in patients with severe symptomatic heterogeneously distributed emphysema. Further studies will be needed to determine relative value of different operative techniques and benefit in patients with other clinical presentations.