Search

Grewia optiva wheat straw waste fibre and PAN fibre are combined in this study to create new composite materials. The novel specimens were created in the hydraulic hind moulding machine with varying percentages of mass of wheat straw fibres, PAN fibre (2–8%) in an equivalent ratio with other materials, and Kevlar fibre-based composites (2–4%). Natural fibre-reinforced clothing is getting increasingly fashionable these days; thus, this research is important. In several papers, natural fibre has been stated to have the potential to replace synthetic fibres. Natural fibre reinforcing has also proven to be quite effective as composites. It is currently used in a range of fields, including medical fields, aerospace, and the automobile industry, among others. Synthetic fibres are used. The usage of synthetic fibres such as asbestos and Kevlar has already been linked to mesothelioma, a kind of lung cancer. Many people have died as a result of Kevlar and asbestos. As a result, an effort to replace these materials is ongoing. Fabricated material’s mechanical, chemical, physical, tribological, and thermal properties were evaluated.

The objective of the present experimental work is to obtain an appropriate welding parameter on pulsed current gas tungsten arc welding (GTAW) ferritic stainless steel AISI 409L with a thickness of 4.5 mm. Frequency affected penetration, and the ratio of bead width to penetration (aspect ratio) is the main objective of the research. A Taguchi L9 orthogonal array with three level four factors was chosen to execute the bead on plate welding. It leads to optimize the input process parameters on main effect plot via analysis of variance, and it has imposed to determine their contribution level of each parameter with respect to responses. Taguchi optimized conditions for butts weld with the pulsed TIG and its surface morphology, and mechanical characteristics of AISI 409L weld was investigated. A full penetration with an optimal aspect ratio was accomplished using high-frequency pulsing, according to the findings. The mechanical properties were characterized using Vickers microhardness and tensile tests on the base material and weld metals. Microstructural study revealed that these variables have a greater impact on the bead profile. Pulsed TIG showed maximum UTS of 445 MPa and a minimum of 385 MPa, with an average of three samples of 415 MPa. The weld metal in all of the zones had influenced superior tensile strength (UTS) as compared to base metal, according to the findings. The obtained strain percentage for both butt and TIG welds, however, was smaller than that of the parent metal. The formation of martensitic was attributed for the higher tensile strength with minimized ductility of the pulsed TIG welds. Furthermore, results on the hardness are in concurrence with the tensile experiments, as the zone for fusion has a higher hardness than the base metal. Corrosion behavior of the parent metal and welded specimen was analyzed using a potentio-dynamic polarization technique. The electrochemical behavior of base material and weld samples confirmed that the overall corrosion resistance is better in parent material than the other zones.

In recent times, research has shifted away from conventional materials and alloys and more towards nanocomposites to create lighter, more efficient materials for specific applications. The major goal of this research is to see how successful adding aluminium tetrahydride (ATH) filler to a luffa fibre/polyester-based hybrid composite is. The compression moulding process was used to create the nanocomposite. The following limitations were used to achieve the goals mentioned above: (i) weight percent of ATH, (ii) weight percent of luffa fibres, and (iii) cryogenic treatment hours. The mechanical properties of the materials, such as flexural, tensile, and impact, were examined. The scanning electron microscope observed the morphology pictures, revealing flaws such as interface behaviour, fibre pullouts, voids, and interior cracks. As a result, the current study found that adding nanofiller to a natural fibre composite can improve its mechanical properties, because it established a strong link between the matrix and its reinforcements, which would aid in the effective transmission of stress in the hybrid system. It also improved moisture resistance, which might be useful in construction and commercial industries. The composite with 1 wt.% of ATH, 24 wt.% of luffa fibres, and 30 minutes of cryogenic treatment showed better mechanical strength. Cryogenic treatment reduces compressive interface stresses, which helps maintain fibre and matrix in contact and improve adhesion, resulting in superior results. TGA analysis was used to confirm it.

The main focus of this research is to enhance the use of eco-friendly materials these days. The current materials used in building construction are chemical-based and are harmful to humans and the environment. This research work has developed a new type of hybrid brick by using natural fibres and waste materials. This research focuses on fabricating novel bricks reinforced with different percentages of coconut waste fibre, wheat straw fibre, waste wood animal dung ash, gypsum, sand, and cement. The fabricated novel brick’s physical, mechanical, chemical, acoustic, and heat-absorbing properties were evaluated.

Wood plastic composites (WPC) are a form of composites made by combining wood particles/flour with polymers. The Mechanical properties of Wood Plastic Composites mainly depends on the composition of its matrix (Polymers), reinforcements (Saw dust), coupling agents and lubricants. Generally, the polymer of the matrix in WPCs is made of a single monomer such as HDPE, PP, PS, PET etc. The Objective of the project is to investigate the mechanical properties of a Wood Plastic Composite by using polymer blend (combination of two or more polymer) as a matrix and its effects on mechanical properties of WPC by varying the composition of the mixture at various proportions.