Search

The reaction of W(NAr)(

Upon addition of 5-15% PhNMe2H+X- (X = B(3,5-(CF3)2C6H3)4 or B(C6F5)4) to Mo(NAr)(styrene)(OSiPh3)2 (Ar = N-2,6-i-Pr2C6H3) in C6D6 an equilibrium mixture of Mo(NAr)(styrene)(OSiPh3)2 and Mo(NAr)(CMePh)(OSiPh3)2 is formed over 36 h at 45 °C (Keq = 0.36). A plausible intermediate in the interconversion of the styrene and 1-phenethylidene complexes is the 1-phenethyl cation, [Mo(NAr)(CHMePh)(OSiPh3)2]+, which can be generated using [(Et2O)2H][B(C6F5)4] as the acid. The interconversion can be modeled as two equilibria involving protonation of Mo(NAr)(styrene)(OSiPh3)2 or Mo(NAr)(CMePh)(OSiPh3)2 and deprotonation of the α or β phenethyl carbon atom in [Mo(NAr)(CHMePh)(OSiPh3)2]+. The ratio of the rate of deprotonation of [Mo(NAr)(CHMePh)(OSiPh3)2]+ by PhNMe2 in the α position versus the β position is ∼10, or ∼30 per Hβ. The slow step is protonation of Mo(NAr)(styrene)(OSiPh3)2 (k1 = 0.158(4) L/(mol·min)). Proton sources such as (CF3)3COH or Ph3SiOH do not catalyze the interconversion of Mo(NAr)(styrene)(OSiPh3)2 and Mo(NAr)(CMePh)(OSiPh3)2, while the reaction of Mo(NAr)(styrene)(OSiPh3)2 with pyridinium salts generates only a trace (∼2%) of Mo(NAr)(CMePh)(OSiPh3)2 and forms a monopyridine adduct, [Mo(NAr)(CHMePh)(OSiPh3)2(py)]+ (two diastereomers). The structure of [Mo(NAr)(CHMePh)(OSiPh3)2]+ has been confirmed in an X-ray study; there is no structural indication that a β proton is activated through a CHβ interaction with the metal. W(NAr)(CMePh)(OSiPh3)2 is also converted into a mixture of W(NAr)(CMePh)(OSiPh3)2 and W(NAr)(styrene)(OSiPh3)2 (Keq = 0.47 at 45 °C in favor of the styrene complex) with 10% [PhNMe2H][B(C6F5)4] as the catalyst; the time required to reach equilibrium is approximately the same as in the Mo system.

Molybdenum and tungsten oxo 2-adamantylidene (Adene) complexes that contain two nonafluoro-tert-butoxide (ORF9) ligands have been prepared through addition of 2-methylene- or 2-ethylideneadamantane...

Addition of 2-adamantylMgBr in diethyl ether to Mo(NArF)2(Cl)2(DME) (ArF = C6F5) gave Mo(NArF)2(Ad)2 (2, Ad = 2-adamantyl, DME = 1,2-dimethoxyethane). Addition of HCl and 2,2′-bipyridyl (bipy) to 2...

Addition of 1 equiv of water to Mo­(CArp)­(ORF9)3 (Arp = p-methoxyphenyl; ORF9 = OC­(CF3)3) in the presence of 5% NEt3 (vs Mo) in THF led to the formation of Mo­(O)­(CHArp)­(ORF9)2(THF)2 in good yield. Mo­(O)­(CHArp)­(ORF9)2(THF)2 reacts with 2 equiv of LiOHMT (OHMT = O-2,6-mesityl2C6H3) at room temperature to yield Mo­(O)­(CHArp)­(OHMT)2 and with 2 equiv of NaOTPP (OTPP = 2,3,5,6-tetraphenylphenoxide) to yield Mo­(O)­(CHArp)­(OTPP)2. In the presence of TMEDA (2.5 equiv), Mo­(CR)­(ORF9)3 (R = Arp, mesityl, or t-Bu) reacts with 1 equiv of water to yield Mo­(O)­(CHR)­(ORF9)2(TMEDA) complexes, from which (when R = t-Bu) TMEDA is readily displaced by 2,2′-bipyridyl to give Mo­(O)­(CH-t-Bu)­(ORF9)2(bipy). Mo­(O)­(CH-t-Bu)­(ORF9)2(bipy) was converted into Mo­(O)­(CH-t-Bu)­Cl2(bipy) readily, from which Mo­(O)­(CH-t-Bu)­Cl­(OHMT)­(3-Brpy) (3-Brpy = 3-bromopyridine) and Mo­(O)­(CH-t-Bu)­Cl­(OHIPT)­(3-Brpy) (OHIPT = O-2,6-(2,4,6-i-Pr3C6H2)2C6H3) were prepared. X-ray studies were carried out on Mo­(O)­(CHArp)­(ORF9)2(THF)2, Mo­(O)­(CH-t-Bu)­(ORF9)2(TMEDA), Mo­(O)­(CHArp)­(OTPP)2, Mo­(O)­(CH-t-Bu)­Cl­(OHMT)­(3-Brpy), and Mo­(O)­(CH-t-Bu)­Cl­(OHIPT)­(3-Brpy).

Addition of 2-adamantylMgBr in diethyl ether to Mo(NAr)2(Cl)2(DME) (Ar = 2,6-i-Pr2C6H3) gave Mo(NAr)2(2-Ad)2 (2-Ad = 2-adamantyl, DME = 1,2-dimethoxyethane), from which Mo(NAr)(Adene)(OTf)2(DME) (1...

Upon addition of 5-15% PhNMe

Molybdenum imido adamantylidene complexes with different substituents on the imido ligand (dipp=2,6-diisopropylphenyl, Ar-F5=C6F5, and Bu-t) having distinct electron donating abilities were investigated for the metathesis of internal and terminal olefins, for both molecular and silica-supported species using standardized protocols. Here we show that surface immobilization of these compounds results in dramatically increased activity compared to their molecular counterparts. Additionally, we show that electron withdrawing imido groups increase the activity of the compound towards terminal olefins while they simultaneously decrease the ability to metathesize internal olefins. Furthermore, these systems also show high stability when used as initiators in olefin metathesis, although the species that display higher initial activity deactivate faster than those that show more a more moderate reaction rate at first. Our catalytic studies, augmented by DFT calculations, show that all investigated compounds have a remarkably small energy difference between the trigonal bipyramidal (TBP) and square planar (SP) configurations of the metallacyclobutane intermediates, which has previously been linked to high activity., Helvetica Chimica Acta, 104 (11), ISSN:0018-019X, ISSN:1522-2675

Many therapeutic agents are macrocyclic trisubstituted alkenes but preparation of these structures is typically inefficient and non-selective. A possible solution would entail catalytic macrocyclic ring-closing metathesis, but these transformations require high catalyst loading, conformationally rigid precursors and are often low yielding and/or non-stereoselective. Here we introduce a ring-closing metathesis strategy for synthesis of trisubstituted macrocyclic olefins in either stereoisomeric form, regardless of the level of entropic assistance. The goal was achieved by addressing several unexpected difficulties, including complications arising from pre-ring-closing metathesis alkene isomerization. The power of the method is highlighted by two examples. The first is the near-complete reversal of substrate-controlled selectivity in the formation of a macrolactam related to an antifungal natural product. The other is a late-stage stereoselective generation of an E-trisubstituted alkene in a 24-membered ring, en route to the cytotoxic natural product dolabelide C.

Grafting a molybdenum oxo alkylidene on silica (partially dehydroxylated at 700 °C) affords the first example of a well-defined silica-supported Mo oxo alkylidene, which is an analogue of the putative active sites in heterogeneous Mo-based metathesis catalysts. In contrast to its tungsten analogue, which shows poor activity towards terminal olefins because of the formation of a stable off-cycle metallacyclobutane intermediate, the Mo catalyst shows high metathesis activity for both terminal and internal olefins that is consistent with the lower stability of Mo metallacyclobutane intermediates. This Mo oxo metathesis catalyst also outperforms its corresponding neutral silica-supported Mo and W imido analogues.

Nitriles are found in many bioactive compounds, and are among the most versatile functional groups in organic chemistry. Despite many notable recent advances, however, there are no approaches that may be used for preparation of di- or trisubstituted alkenyl nitriles. Related approaches which are broad in scope and can deliver the desired products in high stereoisomeric purity are especially scarce. Here, we describe the development of several efficient catalytic cross-metathesis strategies, which provide direct access to a considerable range of Z- or E-disubstituted cyano-substituted alkenes or their corresponding trisubstituted variants. Depending on the reaction type, a molybdenum-based monoaryloxide pyrrolide (MAP) or chloride (MAC) complex may be the optimal choice. The utility of the approach, enhanced by an easy-to-apply protocol for utilization of substrates bearing an alcohol or a carboxylic acid moiety, is highlighted in the context of applications to synthesis of biologically active compounds., Graphical Abstract

[Ar2N3]Mo(N)(O-t-Bu) (1), which contains the conformationally rigid pyridine-based diamido ligand [2,6-(ArNCH2)2NC5H3]2– (Ar = 2,6-diisopropylphenyl), is a catalyst for the reduction of dinitrogen ...

[CAC(OMe)6]Mo(N) (3, where [CAC]3– is a calix[6]azacryptand ligand derived from a [6]calixarene) has been prepared in a reaction between Li3[CAC(OMe)6] and (t-BuO)3Mo(N). An X-ray structural study ...

Author(s): Tafazolian, H; VenkatRamani, S; Tsay, C; Schrock, RR; Muller, P | Abstract: 3,3′,5,5′-Tetra-tert-butyl-2′-sulfanyl[1,1′-biphenyl]-2-ol (H2[tBu4OS]) was prepared in 24 % yield overall from the analogous biphenol using standard techniques. Addition of H2[tBu4OS] to Mo(NAr)(CHCMe2Ph)(2,5-dimethylpyrrolide)2 led to formation of Mo(NAr)(CHCMe2Ph)[tBu4OS], which was trapped with PMe3 to give Mo(NAr)(CHCMe2Ph)[tBu4OS](PMe3) (1(PMe3)). An X-ray crystallographic study of 1(PMe3) revealed that two structurally distinct square pyramidal molecules are present in which the alkylidene ligand occupies the apical position in each. Both 1(PMe3)A and 1(PMe3)B are disordered. Mo(NAd)(CHCMe2Ph)(tBu4OS)(PMe3) (2(PMe3); Ad=1-adamantyl) and W(NAr)(CHCMe2Ph)(tBu4OS)(PMe3) (3(PMe3)) were prepared using analogous approaches. 1(PMe3) reacts with ethylene (1 atm) in benzene within 45 minutes to give an ethylene complex Mo(NAr)(tBu4OS)(C2H4) (4) that is isolable and relatively stable toward loss of ethylene below 60 °C. An X-ray study shows that the bond distances and angles for the ethylene ligand in 4 are like those found for bisalkoxide ethylene complexes of the same general type. Complex 1(PMe3) in the presence of one equivalent of B(C6F5)3 catalyzes the homocoupling of 1-decene, allyltrimethylsilane, and allylboronic acid pinacol ester at ambient temperature. 1(PMe3), 2(PMe3), and 3(PMe3) all catalyze the ROMP of rac-endo,exo-5,6-dicarbomethoxynorbornene (rac-DCMNBE) in the presence of B(C6F5)3, but the polyDCMNBE that is formed has a random structure.

Through relatively straightforward techniques that begin with Mo(NAr)(CH-t-Bu)[OCMe(CF3)2]2 (Ar = 2,6-i-Pr2C6H3), we have prepared Mo(NAr)(CMePh)(OMesityl)2, [Mo(NAr)(CMePh)(OC6F5)2]2, Mo(NAr)(CMePh)(OC6F5)2(MeCN), Mo(NAr)(CMePh)(OC6F5)2(bipyridyl), Mo(NAr)(CMePh)(Cl)2(bipyridyl), Mo(NAr)(CMePh)(Cl)(OHMT)(MeCN) (OHMT = O-2,6-(2,4,6-Me3C6H2)2C6H3), and Mo(NAr)(CMePh)(Pyrrolide)(OHMT). X-ray studies reveal that in five compounds the alkylidene isomer (A) is that in which the phenyl group in the alkylidene points toward the imido nitrogen. In Mo(NAr)(CMePh)(OC6F5)2(MeCN) the isomer in which the methyl group points toward the imido nitrogen (isomer B) has cocrystallized with isomer A (12%). In two 14e compounds that contain isomer A, the Mo═C-C angles differ by 30-36°, consistent with a Mo...C-Hβ agostic interaction. Several of the complexes reported here react readily with ethylene, 1-decene, or cyclooctene to give the expected products, thus confirming their viability as initiators or intermediates in metathesis reactions.

Zn(DCTC) (DCTC = 3,6-dichlorodithiacatecholate) reacts with Mo(NAd)(CHCMe2Ph)Cl2(PPh2Me) (Ad = 1-adamantyl) to give Mo(NAd)(CHCMe2Ph)(DCTC)(PPh2Me). The reactions between Zn(DCTC) and Mo(NAd)(CH-t-Bu)(OTf)2(dme) or Mo(NAr)(CHCMe2Ph)(OTf)2(dme) (Ar = 2,6-i-Pr2C6H3; OTf = triflate; dme = 1,2-dimethoxyethane) produce [Mo(NAd)(CH-t-Bu)(DCTC)]2 and [Mo(NAr)(CHCMe2Ph)(DCTC)]2, respectively. Complexes that contain a 3,3′,5,5′-tetrasubstituted dithiabiphenolate were prepared in a reaction between Mo(NAr)(CHCMe2Ph)(Me2pyr)2 (Me2pyr = 2,5-dimethylpyrrolide) and the 3,3′,5,5′-tetrasubstituted dithiabiphenols, (3,3′,5,5′-tetrachlorodithiabiphenol (H2Cl4S2), 3,3′,5,5′-tetrabromodithiabiphenol (H2Br4S2), and 3,3′,5,5′-tetra-t-Bu-dithiabiphenol (H2Bu4S2)). The isolated complexes include Mo(NAr)(CHCMe2Ph)(Cl4S2)(pyridine), Mo(NAr)(CHCMe2Ph)(Br4S2)(pyridine), Mo(NAr)(CHCMe2Ph)(Bu4S2)(PMe3), and [Mo(NAr)(CHCMe2Ph)(Cl4S2)]2. Only the dithiabiphenolate derivatives (in the presence of B(C6F5)3) show activity for the metathesi...

Reactions between (Z)-XCH═CHX, where X = Cl, CF3, CN, and Mo(N-t-Bu)(CH-t-Bu)(OHIPT)Cl(PPh2Me) (OHIPT = O-2,6-(2,4,6-i-Pr3C6H2)2C6H3) produce Mo(N-t-Bu)(CHX)(OHIPT)Cl(PPh2Me) complexes. Addition of 2,2′-bipyridyl (Bipy) yields Mo(N-t-Bu)(CHX)(OHIPT)Cl(Bipy) complexes, which could be isolated and structurally characterized. The reaction between Mo(N-t-Bu)(CH-t-Bu)(OHMT)Cl(PPh2Me) (OHMT = O-2,6-(2,4,6-Me3C6H2)2C6H3) and (Z)-ClCH═CHCl in the presence of Bipy produces a mixture that contains both Mo(N-t-Bu)(CHCl)(OHMT)Cl(PPh2Me) and Mo(N-t-Bu)(CHCl)(OHMT)Cl(Bipy), but the relatively insoluble product that crystallizes from toluene-d8 is the phosphoniomethylidene complex [Mo(N-t-Bu)(CHPPh2Me)(OHMT)Cl(Bipy)]Cl. The Mo(N-t-Bu)(CHX)(OHIPT)Cl(PPh2Me) complexes (X = Cl, CF3) were confirmed to initiate the stereoselective cross-metathesis between (Z)-5-decene and (Z)-XCH═CHX.

Addition of one equiv of water to Mo(CAr)[OCMe(CF3)2]3(1,2-dimethoxyethane) (2, Ar = o-(OMe)C6H4) in the presence of PPhMe2 leads to formation of Mo(O)(CHAr)[OCMe(CF3)2]2(PPhMe2) (3(PPhMe2)) in 34% yield. Addition of one equiv of water alone to 2 produces the dimeric alkylidyne hydroxide complex, {Mo(CAr)[OCMe(CF3)2]2(μ-OH)}2(dme) (4(dme)) in which each bridging hydroxide proton points toward an oxygen atom in an arylmethoxy group. Addition of PMe3 to 4(dme) gives the alkylidene oxo complex, (3(PMe3)), an analogue of 3(PPhMe2) (95% conversion, 66% isolated). Treatment of 3(PMe3) with two equiv of HCl gave Mo(O)(CHAr)Cl2(PMe3) (5), which upon addition of LiO-2,6-(2,4,6-i-Pr3C6H2)2C6H3 (LiOHIPT) gave Mo(O)(CHAr)(OHIPT)Cl(PMe3) (6). Compound 6 in the presence of B(C6F5)3 will initiate the ring-opening metathesis polymerization of cyclooctene, 5,6-dicarbomethoxynorbornadiene (DCMNBD), and rac-5,6-dicarbomethoxynorbornene (DCMNBE), and the homocoupling of 1-decene to 9-octadecene. The poly(DCMNBD) has a cis,syndiotactic structure, whereas poly(DCMNBE) has a cis,syndiotactic,alt structure. X-ray structures were obtained for 3(PPhMe2), 4(dme), and 6.

[Ar2N3]Mo(N)(O-t-Bu), which contains the conformationally rigid pyridine-based diamido ligand, [2,6-(ArNCH2)2NC5H3]2– (Ar = 2,6-diisopropylphenyl), can be prepared from H2[Ar2N3], butyllithium, and (t-BuO)3Mo(N). [Ar2N3]Mo(N)(O-t-Bu) serves as a catalyst or precursor for the catalytic reduction of molecular nitrogen to ammonia in diethyl ether between −78 and 22 °C in a batchwise manner with CoCp*2 as the electron source and Ph2NH2OTf as the proton source. Up to ∼10 equiv of ammonia can be formed per Mo with a maximum efficiency in electrons of ∼43%.

The molybdenum trisamidoamine (TAA) complex [Mo] {[3,5-(2,4,6-i-Pr3C6H2)2C6H3NCH2CH2N]Mo} carries out catalytic reduction of N2 to ammonia (NH3) by protons and electrons at room temperature. A key intermediate in the proposed [Mo] nitrogen reduction cycle is nitridomolybdenum(VI), [Mo(VI)]N. The addition of [e–/H+] to [Mo(VI)]N to generate [Mo(V)]NH might, in principle, follow one of three possible pathways: direct proton-coupled electron transfer; H+ first and then e–; e– and then H+. In this study, the paramagnetic Mo(V) intermediate {[Mo]N}− and the [Mo]NH transfer product were generated by irradiating the diamagnetic [Mo]N and {[Mo]NH}+ Mo(VI) complexes, respectively, with γ-rays at 77 K, and their electronic and geometric structures were characterized by electron paramagnetic resonance and electron nuclear double resonance spectroscopies, combined with quantum-chemical computations. In combination with previous X-ray studies, this creates the rare situation in which each one of the four possible stat...

This tutorial explores the major pathways of forming metal–carbon double bonds in high-oxidation-state alkylidene complexes that began with the alkylidene chemistry of tantalum complexes in the 1970s and continued with the organometallic chemistry of Mo, W, and Re and the development of homogeneous catalysts for the metathesis of olefins. It also explores recent findings in surface organometallic chemistry and discusses the link between molecularly defined and heterogeneous catalysts. Recent results suggest that heterogeneous olefin metathesis catalysts that are activated toward metathesis upon exposure to olefins produce a d0 alkylidene through formation of a metallacyclopentane ring at d2 metal sites followed by “a ring contraction” to a metallacyclobutane, a reaction that was first observed in tantalum chemistry.

Reactions between Mo(N-t-Bu)(2)(CH(2)-t-Bu)(2) or Mo(NAdamantyl)(2)(CH(2)CMe(2)Ph)(2) and 3 equiv of HCl in the presence of 1 equiv of PPh(2)Me yield Mo(NR)(CHR’)(PPh(2)Me)Cl(2) complexes, from which Mo(NR)(CHR’)(PPh(2)Me)(OAr)Cl complexes (OAr = a 2,6-terphenoxide) can be prepared. The Mo(NR)(CHR’)(PPh(2)Me)(OAr)Cl complexes were evaluated as cross-metathesis catalysts between cyclooctene and Z-1,2-dichloroethylene. The efficiencies of the test reaction for complexes in which OAr = OTPP, OHMT, OHIPT, or OHTBT (where OTPP is 2,3,5,6-tetraphenylphenoxide, OHMT is hexamethylterphenoxide, OHIPT is hexaisopropylterphenoxide, and OHTBT is hexa-t-butylterphenoxide) maximize when OAr is OHMT or OHIPT. Mo(N-t-Bu)(CH-t-Bu)(PPh(2)Me)Cl(2) is essentially inactive for the reaction between cyclooctene and Z-1,2-dichloroethylene. X-ray structural studies were carried out on Mo(NAd)(CHCMe(2)Ph)(PPh(2)Me)Cl(2), Mo(N-t-Bu)(CH-t-Bu)(PPh(2)Me)(OHMT)Cl, Mo(NAd)(CHCMe(2)Ph)(Cl)(OHTBT)(PMe(3)), and [Mo(NAd)(CHCMe(2)Ph)(PMe(3))(Cl)](2)(μ-O), the product of the reaction between Mo(NAd)(CHCMe(2)Ph)(Cl)(OHTBT)(PMe(3)) and 0.5 equiv of water.

Mo(C-t-Bu)(CH-t-Bu)(Cl)(PMe₂Ph)₂ (1) was prepared as off-white crystals in 26% yield through addition of 2.5 equiv of Mg(CH₂-t-Bu)₂ to Mo(O)[OC(CF₃)₃]₄ in diethyl ether followed by 3 equiv of PMe₂Ph and a workup that includes dichloromethane (the source of Cl). Compound 1 is largely a syn isomer initially that equilibrates to give approximately a 1:1 mixture of syn and anti isomers within 1-2 h. Compound 1 reacts with Li(3,5-dimethylpyrrolide) to give Mo(C-t-Bu)(CH-t-Bu)(η¹-Me₂Pyr)(PMe₂Ph)₂ (2a) as a pale yellow solid in 76% yield, and 2a reacts with Ph3SiOH to give a mixture of syn and anti Mo(C-t-Bu)(CH-t-Bu)(OSiPh3)(PMe₂Ph)₂ (3a) in 84% yield. All three compounds tend to lose PMe2Ph to give 14e monophosphine complexes with the formulas Mo(C-t-Bu)(CH-t-Bu)(X)(PMe₂Ph) (X = Cl, Me₂Pyr, or OSiPh₃), none of which could be isolated. X-ray studies show the structures of 1, 2a, and 3a to be analogous with τ values of 0.45, 0.53, and 0.69, respectively.

We have synthesized and characterized tungsten oxo alkylidene biphenolate complexes with the formulas W(O)(CHR)(rac-biphenolate)(PPhMe2) and (R,S)-[W(μ-O)(CHR)(biphenolate)]2 (R = CMe2Ph; biphenolate = L1 or L2 in the text). They behave as initiators for the stereoselective (cis,isotactic) polymerization of 2,3-dicarbomethoxy-5-norbornadiene and eight enantiomerically pure 5-substituted norbornenes with a cis,isotactic precision of 95–98% in most cases. The active initiators are 14e W(O)(CHR)(biphenolate) complexes, which are formed through either dissociation of PPhMe2 from the phosphine adducts or scission of the heterochiral dimer. Addition of B(C6F5)3 (one per W) to (R,S)-[W(μ-O)(CHR)(L1)]2 led to formation of what we propose to be monomeric W[OB(C6F5)3](CHR)(L1) in equilibrium with B(C6F5)3 and (R,S)-[W(μ-O)(CHR)(L1)]2. This mixture decomposed over a period of 1–2 h, was much slower to initiate polymerization than (R,S)-[W(μ-O)(CHR)(L1)]2, and was much less stereoselective. Polymerization of five of the monomers with the imido alkyidene initiator, W(N-2,6-Me2C6H3)(CHCMe2Ph)(rac-L1), gave virtually identical results compared to the results obtained with oxo complexes., National Science Foundation (CHE-1463707)

[Ar

An operationally simple in situ protection/deprotection strategy that significantly expands the scope of kinetically controlled catalytic Z- and E-selective olefin metathesis is introduced. We demonstrate that, prior to the addition of a sensitive Mo- or Ru-based complex, treatment of a hydroxy- or a carboxylic acid-containing olefin with commercially available HB(pin) or readily accessible HB(trip)(2) (pin = pinacolato, trip = 2,4,6-tri(iso-propyl)phenyl) for 15 minutes is sufficient for efficient generation of a desired product. Routine workup leads to quantitative deprotection. A range of stereochemically defined Z- or E-alkenyl chlorides, bromides, fluorides, and boronates or Z-trifluoromethyl-substituted alkenes with a hydroxy- or a carboxylic acid group were thus prepared in 51–97% yield and 93% to >98% stereoselectivity. The substrates, HB(pin), and cross-partners were used as received. We also show that, regardless of whether a polar functional unit is present or not, a small amount of HB(pin) (e.g., 10 mol %) may be used to remove residual water, significantly enhancing efficiency (i.e., lower catalyst loading).

[CAC(OMe)

In the interest of preparing molybdenum and tungsten alkylidene complexes for olefin metathesis that are longer-lived at high temperatures (∼150 °C or above), we synthesized complexes that contain a phenoxide ligand with a 2-pyridyl in one ortho position and a mesityl (Mes) or 2,4,6-i-Pr3C6H2 (Trip) in the other ortho position ([MesON]− or [TripON]−, respectively). The alkylidene (neophylidene) complexes that were prepared include W(O)(CHCMe2Ph)(Me2Pyr)(RON) (R = Mes or Trip), Mo(NC6F5)(CHCMe2Ph)(RON)Cl, Mo(N-2,6-Me2C6H3)(CHCMe2Ph)(RON)Cl, Mo(N-t-Bu)(CHCMe2Ph)(RON)Cl, and M(N-2,6-i-Pr2C6H3)(CHCMe2Ph)(TripON)(OTf) (M = Mo or W). The reaction between Mo(NAr)(CHCMe2Ph)(TripON)(OTf) and ethylene yielded an ethylene complex, Mo(NAr)(C2H4)(TripON)(OTf)(ether). All neophylidene complexes were essentially unreactive toward terminal olefins at 22 °C and showed modest homocoupling activity (at 80 or 100 °C) and alkane metathesis activity (at 150 and 200 °C). W(O)(CHCMe2Ph)(Me2Pyr)(MesON) also stereoselectively poly...

Molybdenum imido alkylidene and tungsten oxo alkylidene complexes that contain a tridentate “pincer” [ONO]2– ligand have been prepared and treated with ethylene to give unsubstituted metallacyclobutane complexes that have a 16e count. Both Mo and W metallacyclobutane complexes exchange C2D4 into the metallacyclobutane ring at 22 °C at a rate that is first order in metal and zero order in C2D4. These metallacycles lose ethylene at least 104–105 times slower than reported 14e unsubstituted Mo and W metallacyclobutane complexes that have been explored in the literature that have a TBP geometry with the metallacyclobutane ring bound in the equatorial positions. Our studies suggest that breaking up the metallacyclobutane ring in these 16e d0 Mo or W complexes is slow because a 14e TBP metallacyclobutane complex cannot be accessed readily.

The reaction between Mo(O)(CHAr(o))(OR(F6))(2)(PMe(3)) (Ar(o) = ortho-methoxyphenyl, OR(F6) = OCMe(CF(3))(2)) and two equivalents of LiOHMT (OHMT = O-2,6-(2,4,6-Me(3)C(6)H(2))(2)C(6)H(3)) leads to Mo(O)(CHAr(o))(OHMT)(2), an X-ray structure of which shows it to be a trigonal bipyramidal anti benzylidene complex in which the o-methoxy oxygen is coordinated to the metal trans to the apical oxo ligand. Addition of one equivalent of water (in THF) to the benzylidyne complex, Mo(CAr(p))(OR)(3)(THF)(2) (Ar(p) = para-methoxyphenyl, OR = OR(F6) or OC(CF(3))(3) (OR(F9))) leads to formation of {Mo(CAr(p))(OR)(2)(μ-OH)(THF)}(2)(μ-THF) complexes. Addition of one equivalent of a phosphine (L) to Mo(CAr(p))(OR(F9))(3)(THF)(2) in THF, followed by addition of one equivalent of water, all at room temperature, yields Mo(O)(CHAr(p))(OR(F9))(2)(L) complexes in good yields for several phosphines (e.g., PMe(2)Ph (69% by NMR), PMePh(2) (59%), PEt(3) (69%), or P(i-Pr)(3) (65%)). The reaction between Mo(O)(CHAr(p))(OR(F9))(2)(PEt(3)) and two equivalents of LiOHMT proceeds smoothly at 90 °C in toluene to give Mo(O)(CHAr(p))(OHMT)(2), a four-coordinate syn alkylidene complex. Mo(O)(CHAr(p))(OHMT)(2) reacts with ethylene (1 atm in C(6)D(6)) to give (in solution) a mixture of Mo(O)(CHAr(p))(OHMT)(2), Mo(O)(CH(2))(OHMT)(2), and an unsubstituted square pyramidal metallacyclobutane complex, Mo(O)(CH(2)CH(2)CH(2))(OHMT)(2), along with ethylene and Ar(p)CH=CH(2). Mo(O)(CHAr(p))(OHMT)(2) also reacts with 2,3-dicarbomethoxynorbornadiene to yield syn and anti isomers of the “first-insertion” products that contain a cis C=C bond.

BACKGROUND The invention of the Haber-Bosch (H-B) process in the early 1900s to produce ammonia industrially from nitrogen and hydrogen revolutionized the manufacture of fertilizer and led to fundamental changes in the way food is produced. Its impact is underscored by the fact that about 50% of the nitrogen atoms in humans today originate from this single industrial process. In the century after the H-B process was invented, the chemistry of carbon moved to center stage, resulting in remarkable discoveries and a vast array of products including plastics and pharmaceuticals. In contrast, little has changed in industrial nitrogen chemistry. This scenario reflects both the inherent efficiency of the H-B process and the particular challenge of breaking the strong dinitrogen bond. Nonetheless, the reliance of the H-B process on fossil fuels and its associated high CO 2 emissions have spurred recent interest in finding more sustainable and environmentally benign alternatives. Nitrogen in its more oxidized forms is also industrially, biologically, and environmentally important, and synergies in new combinations of oxidative and reductive transformations across the nitrogen cycle could lead to improved efficiencies. ADVANCES Major effort has been devoted to developing alternative and environmentally friendly processes that would allow NH 3 production at distributed sources under more benign conditions, rather than through the large-scale centralized H-B process. Hydrocarbons (particularly methane) and water are the only two sources of hydrogen atoms that can sustain long-term, large-scale NH 3 production. The use of water as the hydrogen source for NH 3 production requires substantially more energy than using methane, but it is also more environmentally benign, does not contribute to the accumulation of greenhouse gases, and does not compete for valuable and limited hydrocarbon resources. Microbes living in all major ecosystems are able to reduce N 2 to NH 3 by using the enzyme nitrogenase. A deeper understanding of this enzyme could lead to more efficient catalysts for nitrogen reduction under ambient conditions. Model molecular catalysts have been designed that mimic some of the functions of the active site of nitrogenase. Some modest success has also been achieved in designing electrocatalysts for dinitrogen reduction. Electrochemistry avoids the expense and environmental damage of steam reforming of methane (which accounts for most of the cost of the H-B process), and it may provide a means for distributed production of ammonia. On the oxidative side, nitric acid is the principal commodity chemical containing oxidized nitrogen. Nearly all nitric acid is manufactured by oxidation of NH 3 through the Ostwald process, but a more direct reaction of N 2 with O 2 might be practically feasible through further development of nonthermal plasma technology. Heterogeneous NH 3 oxidation with O 2 is at the heart of the Ostwald process and is practiced in a variety of environmental protection applications as well. Precious metals remain the workhorse catalysts, and opportunities therefore exist to develop lower-cost materials with equivalent or better activity and selectivity. Nitrogen oxides are also environmentally hazardous pollutants generated by industrial and transportation activities, and extensive research has gone into developing and applying reduction catalysts. Three-way catalytic converters are operating on hundreds of millions of vehicles worldwide. However, increasingly stringent emissions regulations, coupled with the low exhaust temperatures of high-efficiency engines, present challenges for future combustion emissions control. Bacterial denitrification is the natural analog of this chemistry and another source of study and inspiration for catalyst design. OUTLOOK Demands for greater energy efficiency, smaller-scale and more flexible processes, and environmental protection provide growing impetus for expanding the scope of nitrogen chemistry. Nitrogenase, as well as nitrifying and denitrifying enzymes, will eventually be understood in sufficient detail that robust molecular catalytic mimics will emerge. Electrochemical and photochemical methods also demand more study. Other intriguing areas of research that have provided tantalizing results include chemical looping and plasma-driven processes. The grand challenge in the field of nitrogen chemistry is the development of catalysts and processes that provide simple, low-energy routes to the manipulation of the redox states of nitrogen.

Ring-opening metathesis polymerization (ROMP) is used to prepare trans-poly(A-alt-B) polymers from a 1:1 mixture of A and B where A is a cyclic olefin such as cyclooctene (A1) or cycloheptene (A2) and B is a large norbornadiene or norbornene derivative such as 2,3-dicarbomethoxy-7-isopropylidenenorbornadiene (B1) or dimethylspirobicyclo[2.2.1]hepta-2,5-diene-2,3-dicarboxylate-7,1′-cyclopropane (B2). The most successful initiators that were examined are of the type Mo(NR)(CHCMe2Ph)[OCMe(CF3)2]2 (R = 2,6-Me2C6H3 (1) or 2,6-i-Pr2C6H3 (2)). The trans configuration of the AB linkages is proposed to result from the steric demand of B. Both anti-MB and syn-MB alkylidenes are observed during the copolymerization, where B was last inserted into a Mo═C bond, although anti-MB dominates as the reaction proceeds. anti-MB is lower in energy than syn-MB, does not react readily with either A or B, and interconverts slowly with syn-MB through rotation about the Mo═C bond. Syn-MB does not readily react with B, but it does ...

A variety of molybdenum or tungsten complexes that contain a tert-butylimido ligand have been prepared. For example, the o-methoxybenzylidene complex W(N-t-Bu)(CH-o-MeOC6H4)(Cl)2(py) was prepared through addition of pyridinium chloride to W(N-t-Bu)2(CH2-o-MeOC6H4)2, while Mo(N-t-Bu)(CH-o-MeOC6H4)(ORF)2(t-BuNH2) complexes (ORF = OC6F5 or OC(CF3)3) were prepared through addition of two equivalents of RFOH to Mo(N-t-Bu)2(CH2-o-MeOC6H4)2. An X-ray crystallographic study of Mo(N-t-Bu)(CH-o-MeOC6H4)[OC(CF3)3]2(t-BuNH2) showed that the methoxy oxygen is bound to the metal and that two protons on the tert-butylamine ligand are only a short distance away from one of the CF3 groups on one of the perfluoro-tert-butoxide ligands (H···F = 2.456(17) and 2.467(17) A). Other synthesized tungsten tert-butylimido complexes include W(N-t-Bu)(CH-o-MeOC6H4)(pyr)2(2,2′-bipyridine) (pyr = pyrrolide), W(N-t-Bu)(CH-o-MeOC6H4)(pyr)(OHMT) (OHMT = O-2,6-(mesityl)2C6H3), W(N-t-Bu)(CH-t-Bu)(OHMT)(Cl)(py) (py = pyridine), W(N-t-Bu)(CH-...

We report an examination of the ring-opening metathesis polymerization (ROMP) of endo-dicyclopentadiene (DCPD) by 10 well-defined molybdenum-based and 16 tungsten-based alkylidene initiators. Five tungsten-based MAP (monoaryloxide pyrrolide) initiators with the general formula W(X)(CHCMe2Ph)(Me2Pyr)(OAr) (X = arylimido, alkylimido, or oxo; Me2Pyr =2,5-dimethylpyrrolide; OAr = an aryloxide) were found to yield >98% cis, >98% syndiotactic poly(DCPD); they are W(N-t-Bu)(CHCMe3)(pyr)(OHMT) (2, OHMT = O-2,6-(2,4,6-Me3C6H2)2C6H3, pyr = pyrrolide), W(N-2,6-i-Pr2C6H3)(CHCMe2Ph)(pyr)(OHMT) (3), W(O)(CHCMe2Ph)(Me2Pyr)(OHMT)(PPh2Me) (7, Me2Pyr =2,5-dimethylpyrrolide), W(O)(CHCMe2Ph)(Me2Pyr)(ODFT)(PPh2Me) (9, ODFT = O-2,6-(C6F5)2C6H3), and W(O)(CHCMe2Ph)(Me2Pyr)(OTPP)(PMePh2) (10, OTPP = O-2,3,5,6-Ph4C6H). Two biphenolate alkylidene complexes, Mo(N-2,6-Me2C6H3)(CHCMe2Ph)(rac-biphen) (17) and W(N-2,6-Me2C6H3)(CHCMe2Ph)(rac-biphen) (22, biphen =3,3′-(t-Bu)2-5,5′-6,6′-(CH3)4-1,1′-biphenyl-2,2′-diolate), were found to yi...

We report the synthesis of >98% cis,isotactic and cis,syndiotactic polynorbornene (poly(NBE)) and poly(endo,anti-tetracyclododecene) (poly(TCD)). Cis,isotactic poly(NBE) and poly(TCD) were prepared employing Mo-based biphenolate imido alkylidene initiators, Mo(NR)(CHCMe2Ph)(Biphen) (Biphen = e.g., 3,3′-(t-Bu)2-5,5′-6,6′-(CH3)4-1,1′-biphenyl-2,2′-diolate), while cis,syndiotactic poly(NBE) and poly(TCD) were prepared employing W-based imido or oxo monoaryloxide pyrrolide (MAP) initiators, W(X)(CHR′)(Pyrrolide)(OTer) (X = NR or O; OTer = a 2,6-terphenoxide). Addition of 1-hexene or coordinating solvents such as THF do not decrease the stereospecificity of the polymerization. Cis,iso and cis,syndio dyads can be distinguished through examination of 1H and 13C NMR spectra of the two polymers in a mixture. The polymers were hydrogenated to give isotactic and syndiotactic H-poly(NBE) and H-poly(TCD).

Ring-opening metathesis polymerization (ROMP) of methyl-N-(1-phenylethyl)-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (PhEtNNBE; (S) and racemic) was investigated employing six molybdenum and tungsten imido alkylidene initiators and two tungsten oxo alkylidene initiators. Of the six initiators that we proposed should yield cis,syndiotactic-poly[(S)-PhEtNNBE], two molybdenum OHMT alkylidene initiators, Mo(NR)(CHMe2Ph)(pyr)(OHMT) (R = 1-adamantyl (Ad) or 2,6-Me2C6H3 (Ar′); OHMT = O-2,6-mesityl2C6H3; pyr = pyrrolide), and two tungsten oxo alkylidene initiators, W(O)(CHMe2Ph)(2,5-dimethylpyrrolide)(PMe2Ph)(OR) (OR = OHMT or (R)-OBr2Bitet where (R)-Br2BitetOH = (R)-3,3′-dibromo-2′-(tert-butyldimethylsilyloxy)-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthyl-2-ol), produced essentially pure cis,syndiotactic-poly[(S)-PhEtNNBE]. Essentially pure cis,isotactic-poly[(S)-PhEtNNBE] was formed when (S)-PhEtNNBE was polymerized by Mo(NAr′)(CHCMe2Ph)(OBiphenCF3)(thf) or W(NAr′)(CHCMe2Ph)((S)-OBiphenMe) (OBiphenCF3 = 3,3′-d...

Four alternating AB copolymers have been prepared through ring-opening metathesis polymerization (ROMP) with Mo(NR)(CHCMe2Ph)[OCMe(CF3)2]2 initiators (R = 2,6-Me2C6H3 (1) or 2,6-i-Pr2C6H3 (2)). The A:B monomer pairs copolymerized by 1 are cyclooctene (A):2,3-dicarbomethoxy-7-isopropylidenenorbornadiene (B), cycloheptene (A′):dimethylspiro[bicyclo[2.2.1]hepta-2,5-diene-2,3-dicarboxylate-7,1′-cyclopropane] (B′), A:B′, and A′:B; A′:B′ and A:B′ are also copolymerized by 2. The >90% poly(A-alt-B) copolymers are formed with heterodyads (AB) that have the trans configuration. Evidence suggests that one trans hetero C═C bond is formed when A (A or A′) reacts with the syn form of the alkylidene made from B (syn-MB = syn-MB or syn-MB′) to give anti-MA, while the other trans C═C bond is formed when B reacts with anti-MA to give syn-MB. Cis and trans AA dyads are proposed to arise when A reacts with anti-MA in competition with B reacting with anti-MA.

Molybdenum and tungsten alkylidene complexes that contain the sterically demanding hexaisopropylterphenylimido ligand, N-2,6-(2,4,6-i-Pr3C6H2)2C6H3 (NHIPT), have been prepared from Mo(N-t-Bu)2Cl2(1,2-dimethoxyethane) or W(N-t-Bu)2Cl2(pyridine)2, employing tert-butylimido ligands as sacrificial proton acceptors. These complexes include M(NHIPT)(CH-t-Bu)Cl2 (M = Mo, W), Mo(NHIPT)(CH-t-Bu)(pyrrolide)2, and Mo(NHIPT)(CH-t-Bu)(pyrrolide)(OC6F5)(CH3CN). In all cases only anti alkylidene isomers are observed in solution, as a consequence of the steric demands of the NHIPT ligand. An X-ray structure of W(NHIPT)(CH-t-Bu)Cl2 showed it to be a monomer with a disordered alkylidene that is 86% in the anti configuration and 14% in the syn configuration.

A convergent diastereo- and enantioselective total synthesis of anticancer and antifungal macrocyclic natural product disorazole C1 is reported. The central feature of the successful route is the application of catalytic Z-selective cross-metathesis (CM). Specifically, we illustrate that catalyst-controlled stereoselective CM can be performed to afford structurally complex Z-alkenyl-B(pin) as well as Z-alkenyl iodide compounds reliably, efficiently, and with high selectivity (pin = pinacolato). The resulting intermediates are then joined in a single-step operation through catalytic inter- and intramolecular cross-coupling to furnish the desired 30-membered ring macrocycle containing the critical (Z,Z,E)-triene moieties.

Molybdenum-, tungsten-, and ruthenium-based complexes that control the stereochemical outcome of olefin metathesis reactions have been recently introduced. However, the complementary nature of these systems through their combined use in multistep complex molecule synthesis has not been illustrated. A concise diastereo- and enantioselective route that furnishes the anti-proliferative natural product neopeltolide is now disclosed. Catalytic transformations are employed to address every stereochemical issue. Among the featured processes are an enantioselective ring-opening/cross-metathesis promoted by a Mo monoaryloxide pyrrolide (MAP) complex and a macrocyclic ring-closing metathesis that affords a trisubstituted alkene and is catalyzed by a Mo bis(aryloxide) species. Furthermore, Z-selective cross-metathesis reactions, facilitated by Mo and Ru complexes, have been employed in the stereoselective synthesis of the acyclic dienyl moiety of the target molecule., National Institutes of Health (U.S.) (NIH grant GM-59426), National Institutes of Health (U.S.) (NIH grant GM-57212), AstraZeneca (Firm) (Graduate Fellowship), National Science Foundation (U.S.) (NSF award CHE-1362763)

The molybdenum trisamidoamine (TAA) complex [Mo] (=(3,5-(2,4,6-i-Pr3C6H2)2C6H3NCH2CH2N)Mo) carries out catalytic reduction of N2 to ammonia by protons and electrons at room temperature. A key intermediate in the proposed [Mo] nitrogen reduction cycle is nitrido-Mo(VI), [Mo(VI)]N: the addition of [e−/H+] to [Mo(VI)]N to generate [Mo(V)]NH might in principle follow one of three possible pathways: direct proton-coupled electron transfer; H+ first, then e−; e− then H+. In this study, the paramagnetic Mo(V) intermediate {[Mo]N}− and [Mo]NH transfer product were generated by irradiating the diamagnetic [Mo]N, {[Mo]NH}+ Mo(VI) complexes respectively, with γ-rays at 77 K, and their electronic and geometric structures were characterized by electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR) spectroscopies combined with quantum chemical computations. In combination with previous X-ray studies this creates the rare situation where each one of the four possible states of an [e−/H+] delivery has been characterized. Because of the degeneracy of the electronic ground states of both, {[Mo(V)]N}− and [Mo(V)]NH, only multi-reference based methods such as the complete active space self-consistent field (CASSCF) and related methods provide a qualitatively correct description of the electronic ground state and vibronic coupling. The molecular g-values of {[Mo]N}− and [Mo]NH exhibit large deviations from the free electron value ge. Their actual values reflect the relative strengths of vibronic and spin-orbit coupling. In the course of the computational treatment, the utility and limitations of a formal two-state model that describes this competition between couplings are illustrated, and implications of our results for the chemical reactivity of these states are discussed.

A “double benzyne” reaction between 1,3-dichloro-2-iodobenzene and 2,4,6-t-Bu3C6H2MgBr followed by the addition of iodine led to 2,6-(2,4,6-t-Bu3C6H2)2C6H3I (HTBTI) in 65% yield. Lithiation of HTBTI with Li-t-Bu gave Li(Et2O)2HTBT from which HTBTSH, HTBTN3, HTBTNH2, and HTBTOH were prepared. An X-ray structure of W(OHTBT)2Cl4 shows that the two HTBTO ligands are trans to one another with the t-Bu3C6H2 groups on one HTBTO interdigitated with the t-Bu3C6H2 groups on the other HTBTO.