Search

Floating cancer cells can survive the programmed death anoikis process after detaching from the extracellular matrix for the anchorage-dependent cells. Purification of viable floating cancer cells is essential for many biomedical studies, such as drug screening and cancer model development. However, the floating cancer cells are mixed with dead cells and debris in the medium supernatant. In this paper, we developed an inertial microfluidic device with sinusoidal microchannels to continuously remove dead cells and debris from viable cells. First, we characterized the differential inertial focusing properties of polystyrene beads in the devices. Then, we investigated the effects of flow rate on inertial focusing of floating MDA-MB-231 cells. At an optimal flow condition, purification of viable cells was performed and the purity of live cells was increased significantly from 19.9% to 76.6%, with a recovery rate of 69.7%. After separation, we studied and compared the floating and adherent MDA-MB-231 cells in terms of cell proliferation, protrusive cellular structure, and the expression of cyclooxygenase (Cox-2) which is related to epithelial-mesenchymal transition (EMT) changes. Meanwhile, drug screening of both floating and adherent cancer cells was conducted using a chemotherapeutic drug, doxorubicin (Dox). The results revealed that the floating cancer cells possess 30-fold acquired chemoresistance as compared to the adherent cancer cells. Furthermore, a three-dimensional (3D) double-cellular coculture model of human mammary fibroblasts (HMF) spheroid and cancer cells using the floating liquid marble technique was developed.

Inflammatory breast cancer (IBC) is an uncommon and highly aggressive form of breast cancer. The disease is characterized by rapid progression with approximately 50% of IBC patients to have human epidermal growth factor receptor 2 (HER2) amplification. HER2-positive IBC is associated with unfavourable prognosis and increased risk of brain metastasis. Ironically, HER2-positive metastatic breast cancer is still prevalent where therapeutic targeting of HER2-receptor is well developed. In addition, the ability to accurately predict the risk of metastatic potential in these cells poses a substantial challenge. Lapatinib (Lap), a dual kinase inhibitor of HER2 and epidermal growth factor receptor is used in the treatment of advanced HER-2 positive breast cancers and is currently being evaluated in the adjuvant setting. In this study, we report the effectiveness of Lap in the suppression of low-dose response to doxorubicin (Dox) in HER2-positive SKBR3 cells. Upon treatment of SKBR3 cells with 0.1 µM of Dox, the cell viability was significantly increased as compared to the human mammary fibroblasts, and triple-negative human breast cancer MDA-MB-231 cells. Interestingly, the effect of 0.1 µM Dox revealed morphological changes consistent with a significant increase in the formation of prominent F-actin filaments and mitochondrial spread compared with the control SKBR3 cells. Furthermore, an enhanced migration was also evident in these cells. However, a combinational dose of 0.1 µM Dox + 5 µM Lap suppressed the observed phenotypic changes in the 0.1 µM Dox treated SKBR3 cells. There was a significant difference in the prominent F-actin filaments and the mitochondrial spread compared with the 0.1 µM Dox versus combination regimen of 0.1 µM Dox + 5 µM Lap. In addition, the combinational therapy showed a decrease in the percentage of wound closure when compared to the control. Hence, the combinational therapy in which Lap suppresses the low-dose effect of Dox in SKBR3 cells may provide an effective intervention strategy for reducing the risk of metastasis in HER2-positive breast cancers.

Cells express multiple biophysical cues during migration, differentiation, and transformation. Probing and quantifying these biophysical cues could serve as a diagnostic tool for differentiating healthy with neoplastic cells. These biophysical cues may be utilized for diagnostic screening in cancer, as the tumor cells interact with the surrounding extracellular matrix (ECM). Stress and strain induced by the cancer cells and applied to the cancer cells have effects in cancer progression due to its influence in cell migration. It was reported that the introduction of compressive forces on cancerous cells triggers them to undergo apoptosis. In this report, we evaluated the effects of stretching forces on cancer cells by morphological analyses. We observed that cancer cells decrease their roundness (as determined by perimeter: area); increase their length and form filopodia in the initial stretching cycle. However, due to the increasing rigidity of the cells, they undergo apoptosis in later stretching cycles. These morphological changes were unique to breast cancer (MDA-MB-231) cells compared to the non-cancerous control. Elucidating and quantifying these morphological changes is potentially an early cancer diagnostic tool that may predict the propensity of the cancerous cells undergoing a metastatic transformation.

Correction for ‘Liquid marble-based digital microfluidics – fundamentals and applications’ by Chin Hong Ooi et al., Lab Chip, 2021, DOI: 10.1039/d0lc01290d.

Liquid marbles are droplets with volume typically on the order of microliters coated with hydrophobic powder. Their versatility, ease of use and low cost make liquid marbles an attractive platform for digital microfluidics. This paper provides the state of the art of discoveries in the physics of liquid marbles and their practical applications. The paper first discusses the fundamental properties of liquid marbles, followed by the summary of different techniques for the synthesis of liquid marbles. Next, manipulation techniques for handling liquid marbles are discussed. Applications of liquid marbles are categorised according to their use as chemical and biological reactors. The paper concludes with perspectives on the future development of liquid marble-based digital microfluidics.

International audience; This work presents crystalline SiC-on-glass as a transparent, robust, and optically stable electrode for simultaneous electrochemical characterization and optical microscope imaging. Experimental results show a large potential window, as well as excellent stability and repeatability over multiple cyclic voltammetric scans in common redox biomarkers such as ruthenium hexaammine and methylene blue. The high optical transmittance and biocompatibility of SiC-on-glass were also observed, enabling cell culture, electrical stimulation, and high resolution fluorescence imaging. This new platform opens exciting opportunities in multi-functional biosensing-probes and observation.

Single-crystal cubic silicon carbide has attracted great attention for MEMS and electronic devices. However, current leakage at the SiC/Si junction at high temperatures and visible-light absorption of the Si substrate are main obstacles hindering the use of the platform in a broad range of applications. To solve these bottlenecks, we present a new platform of single crystal SiC on an electrically insulating and transparent substrate using an anodic bonding process. The SiC thin film was prepared on a 150 mm Si with a surface roughness of 7 nm using LPCVD. The SiC/Si wafer was bonded to a glass substrate and then the Si layer was completely removed through wafer polishing and wet etching. The bonded SiC/glass samples show a sharp bonding interface of less than 15 nm characterized using deep profile X-ray photoelectron spectroscopy, a strong bonding strength of approximately 20 MPa measured from the pulling test, and relatively high optical transparency in the visible range. The transferred SiC film also exhibited good conductivity and a relatively high temperature coefficient of resistance varying from -12 000 to -20 000 ppm/K, which is desirable for thermal sensors. The biocompatibility of SiC/glass was also confirmed through mouse 3T3 fibroblasts cell-culturing experiments. Taking advantage of the superior electrical properties and biocompatibility of SiC, the developed SiC-on-glass platform offers unprecedented potentials for high-temperature electronics as well as bioapplications.

Implantable electronics are of great interest owing to their capability for real-time and continuous recording of cellular–electrical activity. Nevertheless, as such systems involve direct interfaces with surrounding biofluidic environments, maintaining their long-term sustainable operation, without leakage currents or corrosion, is a daunting challenge. Herein, we present a thin, flexible semiconducting material system that offers attractive attributes in this context. The material consists of crystalline cubic silicon carbide nanomembranes grown on silicon wafers, released and then physically transferred to a final device substrate (e.g., polyimide). The experimental results demonstrate that SiC nanomembranes with thicknesses of 230 nm do not experience the hydrolysis process (i.e., the etching rate is 0 nm/day at 96 °C in phosphate-buffered saline (PBS)). There is no observable water permeability for at least 60 days in PBS at 96 °C and non-Na+ ion diffusion detected at a thickness of 50 nm after being soaked in 1× PBS for 12 days. These properties enable Faradaic interfaces between active electronics and biological tissues, as well as multimodal sensing of temperature, strain, and other properties without the need for additional encapsulating layers. These findings create important opportunities for use of flexible, wide band gap materials as essential components of long-lived neurological and cardiac electrophysiological device interfaces.

Digital microfluidics based on liquid marble (LM) has recently emerged as a promising platform for liquid handling and cell-based assays. However, evaporation is a critical problem in such platforms, hindering their wide-range applications in various fields. This study aims to develop a functional sessile LM system for long-term 3D cell culture. Previously, this study group and others demonstrated that floating LM-based bioreactors could reduce the evaporation rate, and were thus suitable for growing multicellular spheroids. However, floating LMs are not robust and easily collapse. Herein, an evaporation-reducing sessile LM by embedding LM with agarose gel is proposed. Through a series of comprehensive mathematical modeling, numerical simulations, and experimental investigations (both with and without biological cells), it is shown that such a platform acts as a moisture absorption system to control the evaporation and thus extends the life span of LMs. It is also found that unlike pure LMs, the LMs filled with agarose maintain their spherical shapes within 72 h inside a humidified incubator. Moreover, the presence of agarose significantly contributes to minimizing evaporation and improves the viability of the harvested multicellular spheroids. These results can open up a new avenue in using LMs in life sciences and chemistry.

Improving and optimizing the processes for transfer printing have the potential to further enhance capabilities in heterogeneous integration of various sensing materials on unconventional substrates for implantable and stretchable electronic devices in biosensing, diagnostics, and therapeutic applications. An advanced transfer printing method based on sacrificial layer engineering for silicon carbide materials in stretchable electronic devices is presented here. In contrast to the typical processes where defined anchor structures are required for the transfer step, the use of a sacrificial layer offers enhances versatility in releasing complex microstructures from rigid donor substrates to flexible receiver platforms. The sacrificial layer also minimizes twisting and wrinkling issues that may occur in free‐standing microstructures, thereby facilitating printing onto flat polymer surfaces (e.g., polydimethylsiloxane). The experimental results demonstrate that transferred SiC microstructures exhibit good stretchability, stable electrical properties, excellent biocompatibility, as well as promising sensing‐functions associated with a high level of structural perfection, without any cracks or tears. This transfer printing method can be applied to other classes of wide bandgap semiconductors, particularly group III‐nitrides and diamond films epitaxially grown on Si substrates, thereby serving as the foundation for the development and possible commercialization of implantable and stretchable bioelectronic devices that exploit wide bandgap materials.

Cryopreservation without cryoprotectant remains a significant challenge for the re-establishment of cell culture after freeze-thaw. Thus, finding an alternative and a simple cryopreservation method is necessary. Liquid marble (LM)-based digital microfluidics is a promising approach for cryoprotectant-free cryopreservation. However, the use of this platform to efficiently preserve samples with low cell density and well-controlled serum concentrations has not been investigated. We addressed this issue by embedding an agarose-containing fetal bovine serum (FBS) inside the LM. A low density of 500 cells/μL of murine 3T3 cells was selected for evaluating the postcryogenic survivability. The effects on the post-thaw cell viability of the concentration of agarose, the amount of FBS inside the agarose, and the volume of the LM were investigated systematically. This paper also presents an analysis on the changes in shape and crack size of post-thawed agarose. The results revealed that the embedded agarose gel serves as a controlled release mechanism of FBS and significantly improves cell viability. Post-thaw recovery sustains major cellular features, such as viability, cell adhesion, and morphology. The platform technology reported here opens up new possibilities to cryopreserve rare biological samples without the toxicity risk of cryoprotectants.

Cellular response to mechanical stimuli is a well-known phenomenon known as mechanotransduction. It is widely accepted that mechanotransduction plays an important role in cell alignment which is critical for cell homeostasis. Although many approaches have been developed in recent years to study the effect of external mechanical stimuli on cell behaviour, most of them have not explored the ability of mechanical stimuli to engineer cell alignment to obtain patterned cell cultures. This paper introduces a simple, yet effective pneumatically actuated 4 × 2 cell stretching array for concurrently inducing a range of cyclic normal strains onto cell cultures to achieve predefined cell alignment. We utilised a ring-shaped normal strain pattern to demonstrate the growth of in vitro patterned cell cultures with predefined circumferential cellular alignment. Furthermore, to ensure the compatibility of the developed cell stretching platform with general tools and existing protocols, the dimensions of the developed cell-stretching platform follow the standard F-bottom 96-well plate. In this study, we report the principle design, simulation and characterisation of the cell-stretching platform with preliminary observations using fibroblast cells. Our experimental results of cytoskeleton reorganisation such as perpendicular cellular alignment of the cells to the direction of normal strain are consistent with those reported in the literature. After two hours of stretching, the circumferential alignment of fibroblast cells confirms the capability of the developed system to achieve patterned cell culture. The cell-stretching platform reported is potentially a useful tool for drug screening in 2D mechanobiology experiments, tissue engineering and regenerative medicine.

Controlled actuation of a floating liquid marble, a liquid droplet coated with hydrophobic particles floating on another liquid surface, is a potential digital microfluidics platform for the transport of aqueous solution with minimal volume loss. This paper reports our recent investigation on the magnetic actuation of floating liquid marbles filled with magnetic particles. The magnetic force and frictional force acting on the floating liquid marble determine the horizontal movement of the marble. We varied the magnetic flux density, flux density gradient, concentration of magnetic particles and speed of the marble to elucidate the relationship between the acting forces. We subsequently determined the suitable operating conditions for the actuation and derived the scaling laws for the actuation parameters.

This work presents the fabrication, mechanical strength characterization, and cell culture demonstration of a high aspect ratio silicon carbide (SiC) membrane. Optimizations in the deposition and fabrication make an ultra-high aspect ratio up to 20,000 SiC membranes with high fracture strength possible. Utilizing the superior properties of SiC material, the ultra-thin SiC membrane is a promising for cell culture/stretching devices, enabling very short optical accesses. The biocompatibility of the SiC membrane was confirmed with the 3T3 fibroblasts cell viability rate of 92.7%, in which the cells flattened and elongated their morphology while maintaining a strong adhesion to the SiC surface.

Micromachined membranes are promising platforms for cell culture thanks to their miniaturization and integration capabilities. Possessing chemical inertness, biocompatibility, and integration, silicon carbide (SiC) membranes have attracted great interest toward biological applications. In this paper, we present the batch fabrication, mechanical characterizations, and cell culture demonstration of robust ultrathin epitaxial deposited SiC membranes. The as-fabricated ultrathin SiC membranes, with an ultrahigh aspect ratio (length/thickness) of up to 20 000, possess high a fracture strength up to 2.95 GPa and deformation up to 50 μm. A high optical transmittance of above 80% at visible wavelengths was obtained for 50 nm membranes. The as-fabricated membranes were experimentally demonstrated as an excellent substrate platform for bio-MEMS/NEMS cell culture with the cell viability rate of more than 92% after 72 h. The ultrathin SiC membrane is promising for in vitro observations/imaging of bio-objects with an extremely short optical access.

Liquid marble is a liquid droplet coated with hydrophobic powder that can be used as a bioreactor. This paper reports the three-dimensional self-assembly and culture of a cell toroid in a slow-releasing, non-adhesive and evaporation-reducing bioreactor platform based on a liquid marble. The bioreactor is constructed by embedding a hydrogel sphere containing growth factor into a liquid marble filled with a suspension of dissociated cells. The hydrogel maintains the water content and concurrently acts as a slow-release carrier. The concentration gradient of growth factor induces cell migration and assembly into toroidal aggregates. An optimum cell concentration resulted in the toroidal (doughnut-like) tissue after 12 hours. The harvested cell toroids showed rapid closure of the inner opening when treated with the growth factor. We also present a geometric growth model to describe the shape of the toroidal tissue over time. In analogy to the classical two-dimensional scratch assay, we propose that the cell toroids reported here open up new possibilities to screen drugs affecting cell migration in three dimensions.

Liquid marble as a bioreactor platform for cell-based studies has received significant attention, especially for developing 3D cell-based assays. This platform is particularly suitable for 3D in-vitro modeling of cell-cell interactions. For the first time, we demonstrated the interaction of olfactory ensheathing cells (OECs) with nerve debris and meningeal fibroblast using liquid marbles. As the transplantation of OECs can be used for repairing nerve injury, degenerating cell debris within the transplantation site can adversely affect the survival of transplanted OECs. In this paper, we used liquid marbles to mimic the hostile 3D environment to analyze the functional behavior of the cells and to form the basis for cell-based therapy. We show that OECs interact with debris and enhanced cellular aggregation to form a larger 3D spheroidal tissue. However, these spheroids indicated limitation in biological functions such as the inability of cells within the spheroids to migrate out and adherence to neighboring tissue by fusion. The coalescence of two liquid marbles allows for analyzing the interaction between two distinct cell types and their respective environment. We created a microenvironment consisting of 3D fibroblast spheroids and nerve debris and let it interact with OECs. We found that OECs initiate adherence with nerve debris in this 3D environment. The results suggest that liquid marbles are ideal for developing bioassays that could substantially contribute to therapeutic applications. Especially, insights for improving the survival and adherence of transplanted cells.

Mitragynine is the major psychoactive alkaloid of the plant kratom/ketum. Kratom is widely used in Southeast Asia as a recreational drug, and increasingly appears as a pure compound or a component of 'herbal high' preparations in the Western world. While mitragynine/kratom may have analgesic, muscle relaxant and anti-inflammatory effects, its addictive properties and effects on cognitive performance are unknown. We isolated mitragynine from the plant and performed a thorough investigation of its behavioural effects in rats and mice. Here we describe an addictive profile and cognitive impairments of acute and chronic mitragynine administration, which closely resembles that of morphine. Acute mitragynine has complex effects on locomotor activity. Repeated administration induces locomotor sensitization, anxiolysis and conditioned place preference, enhances expression of dopamine transporter- and dopamine receptor-regulating factor mRNA in the mesencephalon. While there was no increase in spontaneous locomotor activity during withdrawal, animals showed hypersensitivity towards small challenging doses for up to 14 days. Severe somatic withdrawal signs developed after 12 hours, and increased level of anxiety became evident after 24 hours of withdrawal. Acute mitragynine independently impaired passive avoidance learning, memory consolidation and retrieval, possibly mediated by a disruption of cortical oscillatory activity, including the suppression of low-frequency rhythms (delta and theta) in the electrocorticogram. Chronic mitragynine administration led to impaired passive avoidance and object recognition learning. Altogether, these findings provide evidence for an addiction potential with cognitive impairments for mitragynine, which suggest its classification as a harmful drug.

Understanding the process of fusion of olfactory ensheathing cell spheroids will lead to improvement of cell transplantation therapies to repair spinal cord injuries. The successful fusion of transplanted spheroids will enable alternative transplantation strategies to be developed for in vivo applications. This paper describes the use of a microfluidic device to trap and fuse olfactory ensheathing cell spheroids. The velocity, the pressure distribution in the device were simulated numerically to predict the trapping location. The simulation predicted the optimum flow rates for trapping the spheroids in the later experiments. Simulated particle trajectories were verified experimentally with tracing of fluorescent micro particles. The fusion process of the spheroids was investigated over a period of 48 hours. The microfluidic platform presented here can be used for testing potential drugs that can promote the fusion process and improve the transplantation therapy.

Olfactory ensheathing cells (OECs) are primary candidates for cell transplantation therapy to repair spinal cord injury (SCI). However, the post transplantation survival of these cells remains a major hurdle for a success using this therapy. Mechanical stimuli may contribute to the maintenance of these cells and thus, mechanotransduction studies of OECs may serve as a key benefit to identify strategies for improvement in cell transplantation. We developed an electromagnetic cell stretching device based on a single sided uniaxial stretching approach to apply tensile strain to OECs in culture. This paper reports the design, simulation and characterisation of the stretching device with preliminary experimental observations of OECs in vitro. The strain field of the deformable membrane was investigated both experimentally and numerically. Heterogeneity of the device provided an ideal platform for establishing strain requirement for the OEC culture. The cell stretching system developed may serve as a tool in exploring the mechanobiology of OECs for future SCI transplantation research.

A rigid spherical particle floating on a liquid is a known problem with well-defined solutions. Under the combined effect of gravity and surface tension, the rigid particle deforms the liquid surface. However, in the case of a floating soft particle such as a liquid marble, not only the liquid surface but also the particle itself deforms. In this paper, we investigate the deformation of a floating liquid marble and characterise its height as well as aspect ratio. The experimental results show that theoretical models for a rigid spherical particle suit well for small liquid marbles. Larger marbles require an oblate liquid spheroid model. We will discuss the limitations of the two models and characterise the deformation of these marbles.

A three-dimensional (3D) tissue model has significant advantages over the conventional two-dimensional (2D) model. A 3D model mimics the relevant in-vivo physiological conditions, allowing a cell culture to serve as an effective tool for drug discovery, tissue engineering, and the investigation of disease pathology. The present reviews highlight the recent advances and the development of microfluidics based methods for the generation of cell spheroids. The paper emphasizes on the application of microfluidic technology for tissue engineering including the formation of multicellular spheroids (MCS). Further, the paper discusses the recent technical advances in the integration of microfluidic devices for MCS-based high-throughput drug screening. The review compares the various microfluidic techniques and finally provides a perspective for the future opportunities in this research area.