Search

One of modern analytical chemistry main challenges is providing as fast as possible results in different application fields. In this view, real-time analysis techniques are experiencing ever-increasing success as they can provide data quickly, almost without sample preparation steps. Most of real-time approaches are based on direct mass spectrometry (DMS), a method of analyzing samples without the need for separation or pre-treatment steps. Instead, the sample is directly introduced into the mass spectrometer for analysis. In this context, ambient ionization mass spectrometry (AIMS) techniques are widely represented and successfully used. Extractive-liquid sampling electron ionization-mass spectrometry (E-LEI-MS) represents a different analytical strategy that allows coupling ambient sampling with electron ionization (EI), avoiding any sample preparation step and providing identification based on the comparison with the National Institute of Standards and Technology (NIST) library spectra. E-LEI-MS consists of a dispositive for solvent release and sampling at ambient conditions coupled with an EI source of a single quadrupole mass spectrometer. A micromanipulator allows fine (x,y,z) positioning of a sampling tip. MS can operate in scan or SIM modes depending on the application goals and requirements. Several preliminary successful results were already obtained due to the highly informative EI mass spectra generation. The system was applied to the analysis of active ingredients in pharmaceutical tablets, pesticides on fruit peel, a drug of abuse (cocaine) determination in banknotes, and analysis of unknown components on painting surfaces. Both forensic and artwork applications allowed determining the spatial distribution of the analytes. Here we present a proof-of-concept of E-LEI-MS for targeted/non-targeted analysis and semi-quantitative detection.

Negative chemical ionization (NCI) and electron-capture negative ionization (ECNI) are gas chromatography–mass spectrometry (GC–MS) techniques that generate negative ions in the gas phase for compounds containing electronegative atoms or functional groups. In ECNI, gas-phase thermal electrons can be transferred to electrophilic substances to produce M–• ions and scarce fragmentation. As a result of the electrophilicity requirements, ECNI is characterized by high-specificity and low background noise, generally lower than EI, offering lower detection limits. The aim of this work is to explore the possibility of extending typical advantages of ECNI to liquid chromatography–mass spectrometry (LC–MS). The LC is combined with the novel liquid-EI (LEI) LC–EIMS interface, the eluent is vaporized and transferred inside a CI source, where it is mixed with methane as a buffer gas. As proof of concept, dicamba and tefluthrin, agrochemicals with herbicidal and insecticidal activity, respectively, were chosen as model compounds and detected together in a commercial formulation. The pesticides have different chemical properties, but both are suitable analytes for ECNI due to the presence of electronegative atoms in the molecules. The influence of the mobile phase and other LC- and MS-operative parameters were methodically evaluated. Part-per-trillion (ppt) detection limits were obtained. Ion abundances were found to be stable with quantitative linear detection, reliable, and reproducible, with no influence from coeluting interfering compounds from the sample matrix.

This work presents a sustainable and rapid method for halogenated pesticide analysis without chromatographic separation. The system is composed of a microfluidic open interface (MOI) for solid-phase microextraction (SPME) liquid phase desorption, connected to a liquid electron ionization mass spectrometry interface (LEI-MS). Either a triple quadrupole mass spectrometer (QQQ-MS/MS, (low-resolution) or a quadrupole-time-of-flight tandem MS (QTOF-MS/MS, high-resolution) were employed, each operating in negative chemical ionization (NCI) conditions. The flow rate used (100 µL/min) to rapidly empty the MOI chamber (approximately 2.5 µL) is reduced to the working flow rate of the LEI interface (500 nL/min) by a passive flow splitter (PFS). NCI is an appropriate ionization technique for electrophilic compounds, increasing specificity and reducing background noise. Two halogenated pesticides, dicamba and tefluthrin, were extracted simultaneously from a commercial formulation matrix (CF) using a C18 fiber by direct immersion (3 min under vortex agitation). Analyte desorption occurred in static conditions inside MOI filled with acidified acetonitrile (ACN) (0.2% phosphoric acid, PA). Extraction and desorption steps were optimized to increase efficiency and accelerate the process. No chromatographic separation was involved; therefore, the system fully exploited MS/MS selectivity and HRMS accuracy demonstrating good linearity, repeatability and limits of detection (LODs) and limits of quantification (LOQs) in the pg/mL range (50 and 500 pg/mL, respectively). Low-resolution experiments showed that matrix effects (ME) did not affect the results. The fast workflow (5 min) makes the system suitable for high-throughput analysis observing the principles of green analytical chemistry (GAC).

We present a modified microfluidic open interface (MOI) for the direct coupling of Bio-SPME to a liquid electron ionization-tandem mass spectrometry (LEI-MS/MS) system as a sensitive technique that can directly analyze biological samples without the need for sample cleanup or chromatographic separations as well as without measurable matrix effects (ME). We selected fentanyl as test compound. The method uses a C18 Bio-SPME fiber by direct immersion (DI) in urine and plasma and the subsequent quick desorption (1 min) in a flow-isolated volume (2.5 μL) filled with an internal standard−acetonitrile solution. The sample is then transferred to an EI source of a triple-quadrupole mass spectrometer via a LEI interface at a nanoscale flow rate. The desorption and analysis procedure requires less than 10 min. Up to 150 samples can be analyzed without observing a performance decline, with fentanyl quantitation at microgram-per-liter levels. The method workflow is extremely dependable, relatively fast, sustainable, and leads to reproducible results that enable the high-throughput screening of various biological samples.

Herein we present an efficient, column-switching method that relies on a custom-made T-union passive diffusion micromixer to assist water dilution and promote trap solute focusing of a high sample volume dissolved in pure organic solvent using a 0.075 mm i.d. nano-LC column. This method allows injecting 20 μL (or higher) of sample volume, speeding up the analysis time, with a 400-fold increase of the limits of quantitation for selected compounds. Five pesticides in different media were used as model compounds, and the analyses were carried out with a triple quadrupole mass spectrometer equipped with a Liquid Electron Ionization (LEI) LC-MS interface working in multiple reaction monitoring (MRM) mode. The system microfluidics were investigated using COMSOL modeling software. Robustness of the entire system was evaluated using a post-extraction addition soil extracts with limits of detection values spanning from 0.10 to 0.45 µg/L. Reproducible results in terms of peak area, peak shape, and retention times were achieved in soil matrix. Repeatability test on peak area variations were lower than 10%.

Dispersive liquid-liquid microextraction with and without ultrasound assistance (DLLME, UA-DLLME) and microextraction with packed sorbent (MEPS) methods for the extraction and determination of eight different benzodiazepines (BDZ) (chlordiazepoxide, flurazepam, bromazepam, oxazepam, lorazepam, clobazam, clonazepam, and flunitrazepam) in three commercial non-alcoholic and light alcoholic beverages were optimized and compared. Benzodiazepines are frequently used for their extensive diffusion and strong numbing effect in drug-facilitated crimes (DFC). The tiny small amount of sample required for DLLME and MEPS extraction makes them very suitable for specimens collected at the crime scene of DFCs. Microextraction techniques are of increasing interest thanks to their accordance to green analytical chemistry (GAC) guidelines providing good recovery values. Ultrasound assistance (UA-DLLME) was used to investigate whether this type of energy can improve the recoveries of the analytes. Analyses of the extracts were performed with reverse-phase capillary high-performance liquid chromatography with UV detection (HPLC − UV), thanks to low environmental impact, robustness, diffusion, and affordability. Recovery percentages at three different concentrations in the three beverages were between 14.30% and 103.28% with intraday and interday RSD lower than ± 2.78%. The same samples were extracted using a MEPS protocol, and the results were compared with those obtained with DLLME. MEPS gave recoveries between 20.90% and 101.88% for all matrices showing a better performance than DLLME at higher concentrations, though lower recoveries were observed with diluted samples.

Extra virgin olive oil (EVOO) is one of the main ingredients of the Mediterranean diet. It is claimed as a functional food for its unique content of health-promoting compounds. Tyrosol (Tyr), Hydroxytyrosol (Htyr), and their phenolic derivatives present in EVOO show beneficial properties, and their identification and quantification, both in their free form and after the hydrolysis of more complex precursors, are important to certify its quality. An alternative method for quantifying free and total Tyr and Htyr in EVOO is presented using an LC–MS interface based on electron ionization (EI), called liquid electron ionization (LEI). This method requires neither sample preparation nor chromatography, the sample is diluted and injected. The selectivity and sensitivity were assessed in multiple reaction monitoring mode (MRM), obtaining confirmation and quantification in actual samples ranging from 5 to 11 mg/Kg for the free forms and from 32 to 80 mg/Kg for their total amount after hydrolysis. Two MS/MS transitions were acquired for both compounds using the Q/q ratios as confirmatory parameters. Standard addition calibration curves demonstrated optimal linearity and negligible matrix effects, allowing a correct quantification even without expensive and difficult to find labeled internal standards. After several weeks of operation, the system’s repeatability was excellent, with an intraday RSD (%) spanning from five to nine and an interday RSD (%) spanning from 9 to 11.

This is the first application based on electron ionization (EI) using a Direct-EI LC interface and MS/MS to detect unequivocally target compounds in a very small real sample. The determination and quantification of benzodiazepines in very small residues of beverages, collected at the scene of drug-facilitated crimes are mandatory in legal procedures. A specific and sensitive analytical instrumentation is needed, involving little or no sample preparation. Here, a direct flow injection analysis of alcoholic beverages spiked with commercially available drugs containing diazepam and flunitrazepam is presented. The method proposed is very fast and requires neither sample preparation nor chromatographic separation. Linearity (R(2) ) was between 0.9977 and 0.9992; LOD and LOQ spanned from 0.01 to 0.02 ng/μL and from 0.1 to 0.5 ng/μL, respectively; intra- and interday repeatabilities were between 1 and 8%. No matrix effects were observed from the comparison of the linear regression curves obtained in real fortified samples and in pure ethanol. Vodka, whisky, and white wine specimens were fortified with commercial drugs, Valium(®) and Rohypnol(®) , at two different concentrations (20 and 50 ng/μL) to simulate the typical amounts found in adulterated real samples and analyzed to demonstrate the method applicability to forensic analyses.

Polycyclic aromatic hydrocarbons (PAHs) are USEPA regulated priority pollutants. Their low aqueous solubility requires very sensitive analytical methods for their detection, typically involving preconcentration steps. Presented is the first demonstrated 'proof of concept' use of condensed phase membrane introduction mass spectrometry (CP-MIMS) coupled with direct liquid electron ionization (DEI) for the direct, on-line measurement of PAHs in aqueous samples. DEI is very well suited for the ionization of PAHs and other nonpolar compounds, and is not significantly influenced by the co-elution of matrix components. Linear calibration data for low ppb levels of aqueous naphthalene, anthracene, and pyrene is demonstrated, with measured detection limits of 4 ppb. Analytical response times (t10%-90% signal rise) ranged from 2.8 min for naphthalene to 4.7 min for pyrene. Both intra- and interday reproducibility has been assessed (

Sudden infant death syndrome (SIDS) and sudden intrauterine unexpected death syndrome (SIUDS) are an unresolved teaser in the social-medical and health setting of modern medicine and are the result of multifactorial interactions. Recently, prenatal exposure to environmental contaminants has been associated with negative pregnancy outcomes, and verification of their presence in fetal and newborn tissues is of crucial importance. A gas chromatography-tandem mass spectrometry (MS/MS) method, using a triple quadrupole analyzer, is proposed to assess the presence of 20 organochlorine pesticides, two organophosphate pesticides, one carbamate (boscalid), and a phenol (bisphenol A) in human brain tissues. Samples were collected during autopsies of infants and fetuses that died suddenly without any evident cause. The method involves a liquid-solid extraction using n-hexane as the extraction solvent. The extracts were purified with Florisil cartridges prior to the final determination. Recovery experiments using lamb brain spiked at three different concentrations in the range of 1-50 ng g-1 were performed, with recoveries ranging from 79 to 106 %. Intraday and interday repeatability were evaluated, and relative standard deviations lower than 10 % and 18 %, respectively, were obtained. The selectivity and sensitivity achieved in multiple reaction monitoring mode allowed us to achieve quantification and confirmation in a real matrix at levels as low as 0.2-0.6 ng g-1. Two MS/MS transitions were acquired for each analyte, using the Q/q ratio as the confirmatory parameter. This method was applied to the analysis of 14 cerebral cortex samples (ten SIUDS and four SIDS cases), and confirmed the presence of several selected compounds.

An LC-MS method for the analysis of personal care and household products without sample preparation is presented. The method takes advantage of the Direct-electron ionization (EI) LC-MS interface for the quantitation of principal components, as well as for the identification of unknown or undeclared ingredients. The technique has proven its inertness toward matrix effects and the electron ionization allows quantitation and library identification. Commercially available products (shower gel, perfume, and hand cream) were diluted with methanol and injected directly into a nano-LC column. Limonene, linalool, and citral were selected as target compounds because of their use as fragrances in toiletry and detergent products. These and all other fragrances are commonly determined with GC-MS analysis, prior to sample cleanup, a procedure that can lead to analytes loss. The selected compounds are not detected with ESI because of their poor or very low response. Figures of merit and validation studies were executed and special attention was devoted to matrix-effects evaluation, because a sample preparation procedure is not involved. No matrix effects were observed, and the repeatability was excellent even after several weeks of operation. Products composition was investigated in full scan mode to determine the presence of unknown or not listed ingredients.

Nano-LC columns of different lengths (14–35 cm), 75 μm i.d., were packed with solid-core C18 particles using a conventional HPLC system at low pressure (375 bar) and without expensive tools and fittings. Solid-core particles consist of a solid, non-porous core surrounded with a shell of a porous layer with a very narrow particle size distribution. This geometry allows a faster diffusion of the analytes compared to porous particles, reducing the C term of the Knox plot. Different slurries of packing material were evaluated and tested. The packing procedure was carried out at room temperature and at 70 °C to evaluate the influence of this parameter on the overall process. The synergic action of pressure, temperature and sonication contributed to columns of various lengths in the packing process. The columns were tested at room temperature taking into account the following parameters: Knox plots, specific permeability and peak capacity. Reduced heights of theoretical plates, h, ranged between 3.8 and 5.1 at ν between 2 and 6. An LC-MS test was carried out with a Direct-EI LC-MS instrument.

We investigated the effect of temperature on the packing procedure of nano-LC columns (up to 50 cm) and on their performance. Several slurries of stationary phase were prepared using different solvent mixtures. Their stability was evaluated at several temperatures: 70°C, 50°C, and room temperature. At the higher temperature (70°C) the suspensions resulted to be stable for a longer time. For each slurry, we compared nano-LC columns packed with ultrasounds at 70°C and at room temperature. All the columns were tested with a standard mixture at 70°C, to reduce the solvent viscosity and the backpressure. Main chromatographic parameters such as the asymmetry factor, As, the reduced plate high, h, pattern in a Van Deemter plot, the total porosity, e(t), and the permeability, k, were calculated and discussed. One of the nano-LC columns was used to separate a mixture of pesticides in a LC-MS system with an electron ionization LC-MS interface (Direct-EI). From our knowledge, this is the first study on the role of temperature in the efficiency of slurry-packing procedure.

DiSTeVA, Universita` degli Studi di Urbino ‘‘Carlo Bo,’’Piazza Rinascimento, 6, 61029 Urbino, ItalyReceived 13 July 2010; received (revised) 22 November 2010; accepted 22 November 2010Published online 8 March 2011 in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/mas.20329This review article will give an up-to-date and exhaustiveoverview on the efficient use of electron ionization (EI) tocouple liquid chromatography and mass spectrometry (LC–MS) with an innovative interface called Direct-EI. EI is basedon thegas-phase ionization of the analytes, and it is suitable formany applications in a wide range of LC-amenable compounds.In addition, thanks to its operating principles, it preventsunwelcome matrix effects (ME). In fact, although atmosphericpressure ionization (API) methodologies have boosted the use ofLC–MS, the related analytical methods are sometime affectedby inaccurate quantitative results, due to unavoidable andunpredictable ME. In addition, API’s soft ionization spectraalways demand for costly and complex tandem mass spectrom-etry (MS/MS) instruments, which are essential to acquire an‘‘information-rich’’ spectrum and to obtain accurate quantita-tive information. In EI a one-stage analyzer is sufficient for aqualitative investigation and MS/MS detection is only used toimprove sensitivity and to cut chemical noise. The technologyillustrated here provides a robust and straightforward accessto classical, well-characterized EI data for a variety ofLC applications, and readily interpretable spectra for a widerange of areas of research. The Direct-EI interface canrepresent the basis for a forthcoming universal LC–MSdetector for small molecules. # 2011 Wiley Periodicals, Inc.,Mass Spec Rev 30:1242–1255, 2011Keywords: LC–MS; nano-HPLC; electron ionization; Direct-EI interface; matrix effects

We present the validation of a multiresidue method for the concurrent SPE of organochlorine (OCP) and phenoxy-acidic pesticides (PA) in river water. The two classes of compounds show very different chemical characteristics. The analyses were performed by gas chromatography–mass spectrometry and by liquid chromatography–electrospray ionization–mass spectrometry. The method was validated at three different concentrations: method limit of quantitation, 0.5 and 5 μg L−1. The recoveries were in the range 65–135% for all the target compounds and in the range 83–113% with RSD

The structure of the octadecyl (C18) chain layer attached to a silica surface in the presence of binary solvents (acetonitrile/water; methanol/water) was investigated by electron paramagnetic resonance (EPR) and reverse-phase high-performance liquid chromatography (RP-HPLC), using 4-hydroxy-2,2,6,6 tetramethylpiperidine-N-oxyl (Tempol) to mimic the behavior of pollutants with medium-low polarity. The computer-aided analysis of the EPR spectra provided structural and dynamical information of the probe and its environments which clarified the modifications of the chain conformations that occur at different solvent compositions. Capacity factors, k', were calculated as a function of the percentage of water/organic solvent (mobile phase), and the retention behavior of the C18-functionalized silica surface (stationary phase) was compared with the results obtained with EPR analysis under static conditions. In particular, EPR analysis showed that, at percentages of ACN equal or higher than 50%, the chain layer assume a quite ordered structure, whereas at percentages lower than 50% the chains tend to collapse and fold on the silica surface. In this latter situation, the hydrophobic net of the C18 chains strongly limits Tempol mobility. In methanol/water mixtures, both EPR and RP-HPLC analysis showed that the probe was adsorbed into a poorly ordered interphase. If the residual silanols at the silica surface were bonded to a sililating agent (endcapping), both EPR and RP-HPLC analysis showed a decreased adsorption of the probe with respect to the non-endcapped silica at the same mobile phase composition.

Matrix-dependent signal suppression or enhancement represents a major drawback in quantitative analysis with liquid chromatography coupled to atmospheric pressure ionization mass spectrometry (LC-API-MS). Because matrix effects (ME) might exert a detrimental impact on important method parameters (limit of detection, limit of quantification, linearity, accuracy, and precision), they have to be tested and evaluated during validation procedure. This review gives a detailed description on when these phenomena might be expected, and how they can be evaluated. The major sources of ME are discussed and illustrated with examples from bioanalytical, pharmaceutical, environmental, and food analysis. Because there is no universal solution for ME, the main strategies to overcome these phenomena are described in detail. Special emphasis is devoted to the sample-preparation procedures as well as to the recent improvements on chromatographic and mass spectrometric conditions. An overview of the main calibration techniques to compensate for ME is also presented. All these solutions can be used alone or in combination to retrieve the performance of the LC-MS for a particular matrix-analyte combination.

Despite their enormous utility and diffusion, atmospheric pressure ionization mass spectrometry techniques are subjected to relevant drawbacks called matrix effects (ME). These effects could be summarized in matrix-dependent signal suppression or enhancement that could lead to erroneous quantitative results. The most important method parameters as well as linearity, precision, and accuracy could be modified due to interfering compounds present in the matrix. No validation methods could be accepted without a thorough evaluation of ME and possible strategies to minimize or to correct their influence should be addressed. In this article, we investigate mechanisms that lead to ME and discuss calibration techniques and other strategies to limit these phenomena. Significant examples from different fields of application are discussed as well. Sample preparation procedures, together with instrumental improvements and alternative calibration techniques used by many authors, are reported.

Environmental contextMarine mining activities are potential sources of environmental pollution. Diethylene glycol used in offshore platforms has been suspected to facilitate the release of toxic substances into the sea. The results obtained elucidate that this release is not significant for the metals examined here, apart from iron, nor for polycyclic aromatic hydrocarbons, even at very high diethylene glycol concentrations. AbstractThe role of diethylene glycol (DEG) as a co-solvent for selected organic and inorganic pollutants adsorbed onto the particulate matter in produced formation water (PFW) from offshore gas platforms is thoroughly evaluated. Artificial seawater samples were spiked with certified sediments containing several polycyclic aromatic hydrocarbons (PAH) and metals. Aliquots (1 L) containing no DEG and DEG at 3500 and 5000 mg L−1 were kept in static and dynamic modes for 24 h before analysis to allow sufficient partitioning time between solid and liquid phases for the selected analytes. The Italian legislation on this matter sets 3500 mg L−1 as the highest concentration for DEG in PFW. In our experiments, concentrations equal to and above the set limit were chosen to enhance any possible co-solvent effect. Real PFW samples were also analysed, both with and without DEG. The analyses were conducted by using GC-MS for the PAH, and ICP-MS for the metals. A minor co-solvent effect was observed for low-molecular-weight PAH in the artificial seawater in static mode. Among metals, only iron showed an increase in solubility in the presence of DEG, demonstrating the co-solvent effect of DEG. The experiments in dynamic mode revealed no increase in the solubility of any other analytes in the liquid phase compared with static mode.

A conspicuous fraction of the water soluble organic compounds (WSOC) in fog and fine aerosol samples is composed by monosaccharide anhydrides, such as levoglucosan and its stereoisomers, galactosan and mannosan. Levoglucosan is produced exclusively during wood combustion processes, making it a very useful tracer for plant combustion emissions in the atmosphere. This paper describes a new experimental approach, based on electrospray-tandem mass spectrometry (ESI-MS/MS), for the identification of levoglucosan in fog water samples. The analytical method proposed allows to identify the specific sugar anhydrides directly in the liquid phase without the need of any derivatization process.

With the advent of soft ionization methods such as MALDI and ESI, mass spectrometry has become the most important technique for the analysis of proteins and peptides. ESI-MS is often preceded by separation of the peptide sample by reversed-phase liquid chromatography (LC). Acetonitrile (ACN) is the most commonly employed organic solvent in LC-ESI-MS analysis of peptides. In this report, we demonstrate that the use of methanol (MeOH) as the organic modifier improves the detection limits for analysis of peptide mixtures such as those found in tryptic digests of proteins. A nanoLC-ESI-quadrupole ion trap instrument (LCQ Deca, ThermoFinnigan) was used to analyze peptide standards, protein digests of known concentrations, and tryptic digests of 2-DGE-separated proteins. MeOH displayed excellent chromatographic performance (separation and sensitivity), and shorter gradient times were possible for chromatographic separation with MeOH versus ACN. Sensitivity levels of a few hundred attomoles were achieved with MeOH; those levels could not be achieved with ACN. In addition, MeOH-based nanoLC-MS/MS yielded superior results for the analysis of digests of 2-DGE-separated proteins. For the 14 protein spots analyzed, the success rate of protein identification with MeOH-based nanoLC-ESI-MS/MS was 100%, with multiple proteins identified in several of the spots. In contrast, ACN-based procedure failed to identify any proteins in 21% of the spots and overall identified 33% fewer proteins than the MeOH-based procedure. In summary, higher sensitivity and shorter gradient times make MeOH an excellent organic modifier for the use in nanoLC-ESI-MS/MS analysis of peptides.

We describe a method, based on a new nano-HPLC gradient generator coupled to a modified direct electron ionization (EI) LC–MS interface, for the analysis of several compounds of environmental interest. The gradient generator was installed on a conventional HPLC system and the nano-flow rate was achieved using a double splitter. Reproducible gradients of different shapes (i.e. linear, convex, concave) can be generated at micro- and nano-flow rates. This attribute makes this device particularly appropriate for coupling with direct-EI LC–MS interface. The combination of the gradient generator with the direct-EI interface optimizes the analytical conditions for the generation of good quality EI spectra for trace level analytes. The performance of this new system was tested at a flow rate of 250 nl min−1, evaluating linearity, intra-day reproducibility and limits of detection of several compounds of environmental interest belonging to three different classes: nitro-polycyclic aromatic hydrocarbons, pesticides and human hormones. Excellent signal stability and low detection limits were obtained in most cases. Enhanced performance was observed for critical separations due to the possibility to run gradients of different shapes.

Water-soluble organic compounds (WSOC) often represent a large fraction of the total organic mass found in the atmospheric aerosol. They play a very important role in determining the ability of aerosol particles to act as cloud condensation nuclei (CCN), influencing cloud and fog formation and cloud albedo. Molecular characterization of WSOC in fogwater samples was achieved using a two-stage ion-trap mass spectrometer equipped with electrospray ionization (ESIMS/MS). Negative ionization conditions in the electrospray interface finalized our characterization of the acidic fraction of WSOC that comprises both mono- and di-carboxylic acids and polycarboxylic acids for which a similarity was suggested with naturally occurring humic (or fulvic) acids, and which are sometimes referred to in the literature as humic-like substances (HULIS). Molecular structure elucidation was accomplished using several model compounds and exploiting mass spectral resolution for compound separation. Single compound identification ...

Permission to reproduce this table online was not granted by the copyright holder. Readers are kindly asked to refer to the printed version. Two recent approaches for coupling capillary scale liquid chromatography and electron ionization mass spectrometry are reviewed and discussed. The first one, Cap-EI, is the latest evolution of the micro-scale particle beam interface, in which the nebulizer has been optimized to overcome the limitations of the former approach, in terms of sensitivity and linearity. It can be easily hosted in pre-existing instruments without major modifications and can use helium and the less-expensive nitrogen to generate library-matchable electron ionization spectra. The second one is a miniaturized interface for nano- and micro-HPLC, in which the interfacing process takes place into a suitably modified ion source. Because the eluate from the column is completely transferred into the ion source for ionization, superior sensitivity, linearity, and reproducibility are obtained. No signs of chemical ionization are observed at flow rates up to 1.5 μL/min. These two interfaces demonstrate that electron ionization can be successfully used for the analysis of small—medium molecules of various polarities, and also at the trace level. The possibility to record library-matchable electron ionization spectra offers the analyst a powerful tool that can be particularly useful in real-world applications.© 2001 John Wiley & Sons, Inc., Mass Spec Rev 20: 88–104, 2001

A new solid-phase extraction on-line device for micro-HPLC is presented. This device optimizes the injection of very dilute samples into a packed capillary column. It consists of two capillary, reversed-phase, HPLC columns of different length that can be linked together as a single chromatographic column. The first segment, only 2 cm long is connected to the HPLC injector. When disconnected from the longer column, several milliliters of an aqueous sample can be passed through at a high flow rate for fast trapping. On the basis of the retention mechanism, all suitable compounds are focused on the short column head in a sharp band. As soon as the chromatographic column is recomposed, the trapped analytes are eluted and separated at the optimal flow rate and gradient conditions. Due to the high preconcentration factor, trace-level analysis can be performed successfully. Different classes of analytes of various polarities and molecular weights can be determined, depending on the stationary phase and on the detector used. Some pesticides belonging to different classes were chosen to evaluate the performance of the device using an electron ionization mass spectrometer as HPLC detector. A fungicide in an irrigation canal water was determined at a concentration level of 4.5 microg x L(-1).

The crystal structures of the azamacrocycle 1,7–bis(2–hydroxy-5–nitrobenzyl)-4,10–dimethyl-1, 4,7,10–tetraazadodecane (L) (zwitterionic form) (L-0.5CH3OH-3.5H2O) and the monocharged derivative (HL+) (HL-Br-2C2H5OH) are reported. The crystals of L-0.5CH3 OH-3.5H2O are rhombohedral (hexagonal axes), space group R3, a = b = 42.472(7), c = 9.415(9) A, Z = 18, R = 0,034, whereas the crystals of HL-Br-2C2H5OH are monoclinic, space group C2/c, a = 20.418(5), b = 13.814 (4), c = 11.785(3) A, β = 99.00(2)°, Z = 4, R = 0.067. The differences in their conformation are discussed. Molecular mechanics calculations were carried out and indicate that the energy difference between the two species is very small. The stepwise enthalpies of protonation in solution were determined by direct microcalorimetry: ΔH° = −23.8(4) kJ mol−1 for H−1L− + H+ = L; ΔH°≅O for reactions L + H+ = HL+ and HL+ + H+ = H2L2+. The addition of the third proton is also athermic and fully entropy-controlled.

Endocrine disrupting compounds (EDCs) include organochlorine pesticides (OCPs), organophosphate pesticides (OPPs), carbamate pesticides, and plasticizers, such as bisphenol A (BPA). They persist in the environment because of their degradation resistance and bioaccumulate in the body tissues of humans and other mammals. Many studies are focused on the possible correlation between in utero exposure to EDCs and adverse health hazards in fetuses and newborns. In the last decade, environmental pollution has been considered a possible trigger for Sudden Infant Death Syndrome (SIDS) and Sudden Intrauterine Unexplained Death Syndrome (SIUDS), the most important death-causing syndromes in fetuses and newborns in developed countries. In this work, a rapid and sensitive analytical method was developed to determine the level of OCPs and OPPs, carbamates, and phenols in human fetal and newborn tissues (liver and brain) and to unveil the possible presence of non-targeted compounds. The target analytes where selected on the basis of their documented presence in the Trentino-Alto Adige region, an intensive agricultural area in northern Italy. A liquid-solid extraction procedure was applied on human and animal tissues and the extracts, after a solid phase extraction (SPE) clean-up procedure, were analyzed by gas chromatography coupled to a quadrupole mass spectrometric detector (GC-qMS). A GC-TOFMS (time-of-flight) instrument, because of its higher full-scan sensitivity, was used for a parallel detection of non-targeted compounds. Method validation included accuracy, precision, detection, and quantification limits (LODs; LOQs), and linearity response using swine liver and lamb brain spiked at different concentrations in the range of 0.4–8000.0 ng/g. The method gave good repeatability and extraction efficiency. Method LOQs ranged from 0.4–4.0 ng/g in the selected matrices. Good linearity was obtained over four orders of magnitude starting from LOQs. Isotopically labeled internal standards were used for quantitative calculations. The method was then successfully applied to the analysis of liver and brain tissues from SIUDS and SIDS victims coming from the above mentioned region.

We investigated the effect of temperature on the packing procedure of nano-LC columns (up to 50 cm) and on their performance. Several slurries of stationary phase were prepared using different solvent mixtures. Their stability was evaluated at several temperatures: 70°C, 50°C, and room temperature. At the higher temperature (70°C) the suspensions resulted to be stable for a longer time. For each slurry, we compared nano-LC columns packed with ultrasounds at 70°C and at room temperature. All the columns were tested with a standard mixture at 70°C, to reduce the solvent viscosity and the backpressure. Main chromatographic parameters such as the asymmetry factor, As, the reduced plate high, h, pattern in a Van Deemter plot, the total porosity, ε(t), and the permeability, k, were calculated and discussed. One of the nano-LC columns was used to separate a mixture of pesticides in a LC-MS system with an electron ionization LC-MS interface (Direct-EI). From our knowledge, this is the first study on the role of temperature in the efficiency of slurry-packing procedure.

An innovative approach for nano-liquid chromatography (LC) gradient generation is presented. This system represents an optimized and refined version of a prototype proposed by the authors a few years ago: the current version is characterized by a new configuration that guarantees complete automation and easier operation. The core of the system is an electronically controlled, multiposition valve that hosts six loops, filled with different mobile phase compositions of increasing strength. A conventional flow rate of water is reduced at nano-scale through a split device to push the content of the on-line loop into the column. No mixing occurs between solvents inside the loops, due to the low flow rate and the reduced loop diameter. Valve actuation allows the selection of the on-line loop to obtain the solvent gradient. The evaluation of the system performance takes into account gradient accuracy, precision, delay time, shape (linear, convex, or concave), and organic solvent consumption. Results highlight the reliability and the competitiveness of the system, especially in terms of accuracy and precision. A comparison between the described system and a conventional split-based one demonstrates that the new approach reduces the solvent consumption by about 40 times, improving green chromatography and cutting laboratory costs.

The generation of a micro-gradient for micro HPLC capillary columns is described. The system used is a modified and improved version of a split flow gradient elution device. Gradient tests have been performed and have shown good reproducibility under all conditions. The system has been successfully coupled with a particle beam LC-MS interface and the analysis of a mixture of twenty seven basic or neutral pesticides is reported.

One of the crucial tasks of pharmaceutical industry is to quantify the potential genotoxic impurities (PGIs) coming from the process of drug production. The European Medicines Agency (EMEA) imposes analytical testing limits in the order of μg/g, depending on drug dosage and exposure period, that means the need of a sensitive and selective method of analysis. Liquid chromatography coupled to electrospray ionization mass spectrometry (LC-ESI-MS) has been demonstrated as the most versatile approach to detect PGIs in complex matrices. However, time consuming derivatization processes are needed to enhance sensitivity and selectivity, and to overcome matrix effects (ME) that may arise from active pharmaceutical ingredients (APIs) or excipients. We propose the use of the Direct-EI LC-MS as an alternative approach to detect and quantify PGIs in drug formulations. The Direct-EI LC-MS interface is based on electron ionization (EI) which is well suited for the detection of low molecular weight compounds of different polarity, without derivatization and with no sign of ME. The method has been successfully applied to the detection of PGIs belonging to the class of alkylation agents. Calibration experiments show satisfactory linearity and precision data. Recoveries in low enriched samples spanned from 55 to 82%, and were not affected by ME. The method limits of detection (LODs), varying from 0.13 to 1.5 μg/g, were satisfactory for the quantitation of the target PGIs at the level required by regulatory agencies.

Matrix-dependent signal suppression or enhancement represents a major drawback in quantitative analysis with liquid chromatography coupled to atmospheric pressure ionization mass spectrometry (LC-API-MS). Because matrix effects (ME) might exert a detrimental impact on important method parameters (limit of detection, limit of quantification, linearity, accuracy, and precision), they have to be tested and evaluated during validation procedure. This review gives a detailed description on when these phenomena might be expected, and how they can be evaluated. The major sources of ME are discussed and illustrated with examples from bioanalytical, pharmaceutical, environmental, and food analysis. Because there is no universal solution for ME, the main strategies to overcome these phenomena are described in detail. Special emphasis is devoted to the sample-preparation procedures as well as to the recent improvements on chromatographic and mass spectrometric conditions. An overview of the main calibration techniques to compensate for ME is also presented. All these solutions can be used alone or in combination to retrieve the performance of the LC-MS for a particular matrix-analyte combination.

A major limitation in quantitative analysis with electrospray ionization mass spectrometry (ESI-MS) is represented by the so-called matrix effects in which the matrix coextracted with the analytes can alter the signal response, causing either suppression or enhancement, resulting in poor analytical accuracy, linearity, and reproducibility. In the direct electron ionization liquid chromatography-mass spectrometry (direct-EI LC-MS) interface the ionization process is based on electron impact ionization, and it occurs in the gas phase and is not influenced by coeluted matrix compounds. In this work we quantitatively evaluated matrix effects on enriched environmental and biological samples, with different extraction procedures, using ESI and direct-EI LC-MS. As expected, the samples analyzed with direct-EI were not affected by matrix composition, whereas with ESI we observed either signal suppression or enhancement, depending on the sample nature.

Very low concentrations (down to 0.2 ng/mL) of an antispasmodic drug (Eperison) can be extracted from human plasma and analyzed by GC/MS. For sample preparation and preconcentration, solid phase extraction (SPE) has been employed. A double focussing mass spectrometer was interfaced with a capillary GC column for the GC/MS analysis. The gas chromatograph was equipped with an on-column injector to avoid thermal decomposition.

Diethylene glycol (DEG) is extensively used on offshore gas platforms to prevent the hydrate formation during the gas–water separation process and to inhibit corrosion events. This chemical might enter in the marine environment via the produced formation water (PFW) discharge. In this study, a new approach was applied to the investigation of the DEG content in PFW discharges and seawater samples from four gas installation platforms in the Adriatic Sea (Italy). The method includes an off-line solid-phase extraction/pre-concentration technique, followed by a nanoscale flow injection/direct-electron ionization (EI) mass spectrometric analysis. Direct-EI is a novel and miniaturized interface for directly coupling a liquid chromatograph with an electron ionization mass spectrometer. The capability to acquire EI spectra, and to operate in selected ion monitoring mode during actual sample analyses, allowed a precise quantification of DEG with a method limit of detection of 31 μg/l. In addition, a careful evaluation of the matrix effect showed that, as opposed to electrospray ionization, the response of the Direct-EI interface was not affected by sample interferences.

In this article, a detailed overview of the current high-performance liquid chromatography/mass spectrometry (HPLC/MS) instrumentation, suitable for the determination of a large number of pesticides, is reported. Particular emphasis is given to the role of the mass spectrometric apparatus involved in each interfacing technique with several information regarding the ionization processes, analyzer principles, and system configurations. The article is an up-to-date picture of the current instrumentation available and the reader will find only brief references to some important historical approaches that are no longer in use. Keywords: LC/MS; pesticides analysis; LC/MS interfaces

A new, simple device generates accurate nano- and microflow rate gradients from any conventional HPLC system. The core of the new device is represented by an electric-actuated, computer-controlled, multiposition HPLC valve. The valve hosts six reservoirs for as many different mobile-phase compositions of increasing strength. A low flow rate stream pushes the weakest solvent through the column as long as required and at the desired flow rate, until the chromatographic run is started. From this time on, the electric actuation allows one to select which reservoir will be on-line with the column and for how long, thus generating a specific solvent gradient, through a sequence of controlled segments of precise mobile-phase composition. This permits one not only to exactly reproduce the programmed slope but also to achieve different gradient shapes (i.e., linear, convex, concave) for different separation needs. The new device has proven to be reliable and reproducible even at the lowest flow rate tested (250 nL x min(-1)) and in different chromatographic conditions.

A method to extract and analyze organic compounds from water is presented. A solid phase micro-trap (micro-SPE) directly connected to the micro-analytical column is used. Sensibility and specificity needed for trace analysis are guaranteed by mass spectrometric electron ionization (EI) detection. A new micro-HPLC/EI-MS interface called Capillary-EI (Cap-EI) is described. The ultimate evolution of this interface is also presented: in this extremely simplified interface the analytes are nebulized, vaporized and ionized in the small volume of the ion source. This interface, called Direct-EI, exploits nano- and micro-HPLC columns with a mobile phase flow rates ranging from 0.3 to 1.5 microL/min. Contemporary use of micro SPE, Cap-EI or Direct-EI gives us a powerful technique to identify and quantify organic pollutants at part per billion level (ppb).

LC/EI MS may extend the simplicity of GC/MS to many HPLC-amenable compounds without compromising the full potential of LC.

A simple and rapid method for the determination of ATP, ADP, AMP, NADP+, NAD+, NADPH, and NADH in human erythrocytes is described. A single-step extraction procedure employing alkaline medium and CF 50A Amicon ultrafiltration membranes allows a simultaneous and total recovery of the compounds of interest. Analysis is performed by reverse-phase high-performance liquid chromatography on a 5-micron Supelcosil LC-18 column and uv detection. Extraction and analysis require about 30 min. Levels of adenine and pyridine nucleotides in normal adults are also presented.

Two new azamacrocycles 1,7-bis(2-hydroxy-5-nitrobenzyl)-4,10-dimethyl-1,4,7,10-etraazadodecane (L1) and 1,13-bis(2-hydroxy-5-nitrobenzyl)-4-10-dimethyl-4,7,10,16-tetramethyl-1,4,7,10,13,16,-hexaazaoctadecane (L2) have been synthesised and characterised. The basicity behaviour has been studied by potentiometry at 298.1 K in 0.15 mol dm 4Me4NCl, by 1H and 13C NMR spectroscopy, as well as by UV-Vis spectroscopy. L1 behaves as a tetraprotic base in the pH range investigated: log K113, log K2 = 10.59(1), log K3 = 7.18(2) and log K4 = 4.86(2). L2 behaves as a hexaprotic base; log K1 = 10.38(2), log K2 = 9.96(2), log K3 = 8.29(2), log K4 = 5.71(2), log K5 = 4.68(3) and log K6 = 2.2(1). The influence on the basicity behaviour of the nitrophenolic side arms is dicussed. In the case of L2, the equilibria with Cu(II) have been studied by a potentiometric technique. Four main species have been found: the binuclear species [Cu2L2]2+ (log K = 28.7(1)), and three protonated species: [CuH2L2]2+, [CuH3L2]3+, [CuH4L2]4+, For the L1/Cu(II) system the precipitation of a solid compound prevents the determination of any stability constants, however the coordination behaviour of L1 toward Cu(II) is observed in the crystal structure of [CuL1]ClO4. Crystals of [CuL1]CO4 are triclinic, space group P1, with a = 8.777(3), b = 10.744(3), c = 15.814(3) A , α = 100.58(2), β = 98.47(2), γ = 101.16(2) 0 , Z = 2, R = 0.070 .