Search

Organic-inorganic hybrid perovskite nanoparticles (OIHP NPs) have attracted scientific attention owing to their efficient photoluminescence with optical tunability, which is highly advantageous for optoelectronic applications. However, the limited long-term stability of OIHP NPs has significantly hindered their practical application. Despite several synthetic strategies and encapsulation methods to stabilize OIHP NPs, complicated multi-step procedures are often required. In this study, we introduce an in situ ligand engineering method for stabilizing and controlling the optical properties of OIHP NPs using tetraalkylammonium (TAA) halides with various molecular structures at different concentrations. Our one-pot ligand engineering substantially enhanced the stability of the OIHP NPs without post-synthetic processes. Moreover, in certain cases, approximately 90% of the initial photoluminescence (PL) intensity was preserved even after a month under ambient conditions (room temperature, 20-50% relative humidity). To determine the role of ligand engineering in stabilizing the OIHP NPs, the surface binding properties of the TAA ligands were thoroughly analyzed using Raman spectroscopy. Specifically, the permanent positive charge of the TAA cations and consequent effective electrostatic interactions with the surfaces of the OIHP NPs are pivotal for preserving the initial PL intensity. Our investigation is beneficial for developing OIHP nanomaterials with improved stability and controlled photoluminescence for various optoelectronic applications, such as light-emitting devices, photosensitizers, photodetectors, photocatalysis, and solar cells.

The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/β-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (E

A fully Integrated Micropillar Polydimethylsiloxane Accurate CRISPR deTection (IMPACT) system is developed for viral DNA detection. This powerful system is patterned with high-aspect-ratio micropillars to enhance reporter probe binding. After surface modification and probe immobilization, the CRISPR-Cas12a/crRNA complex is injected into the fully enclosed microchannel. With the presence of a double-stranded DNA target, the CRISPR enzyme is activated and denatures the single-stranded DNA reporters from the micropillars. This collateral cleavage releases fluorescence reporters into the assay, and the intensity is linearly proportional to the target DNA concentration ranging from 0.1 to 10 nM. Importantly, this system does not rely on the traditional dye-quencher-labeled probe, thus reducing the fluorescence background presented in the assay. Furthermore, our one-step detection protocol is performed on-chip at isothermal conditions (37 °C) without using complicated and time-consuming off-chip probe hybridization and denaturation. This miniaturized and fully packed IMPACT chip demonstrates sensitive and accurate DNA detection within 120 min and paves ways to the next-generation point-of-care diagnostics, responding to emerging and deadly pathogen outbreaks.

The reaction dynamics of a photochemical reaction is typically described by reaction coordinates based on the Born-Oppenheimer (BO) approximation. A strong interaction between electrons and nuclei, conventionally occurring at conical intersections, however, breaks the BO approximation and has major consequences for the efficiency of a photochemical reaction. Despite its importance, related studies into the non-BO dynamics are scarce. Here, we investigate the non-BO dynamics of excited-state intramolecular proton transfer (ESIPT) occurring in 10-hydroxybenzo[h]quinoline (HBQ). Two coherent vibrational modes at 237 and 794 cm-1 representing molecular dynamics on a diabatic surface in HBQ are identified by a wave packet analysis based on a transient absorption measurement with a time resolution of 11 fs and with a density functional theory-based model calculation. It is also revealed that the strong Coulomb field effect in HBQ leads to the completion of ESIPT within about two cycles of the OH stretching mode. The work paves the way for time-domain studies of molecular dynamics beyond the BO approximation in other photochemical reactions.

Highly infectious illness caused by pathogens is endemic especially in developing nations where there is limited laboratory infrastructure and trained personnel. Rapid point-of-care (POC) serological assays with minimal sample manipulation and low cost are desired in clinical practice. In this study, we report an automated POC system for Ebola RNA detection with RNA-guided RNA endonuclease Cas13a, utilizing its collateral RNA degradation after its activation. After automated microfluidic mixing and hybridization, nonspecific cleavage products of Cas13a are immediately measured by a custom integrated fluorometer which is small in size and convenient for in-field diagnosis. Within 5 min, a detection limit of 20 pfu/mL (5.45 × 107 copies/mL) of purified Ebola RNA is achieved. This isothermal and fully solution-based diagnostic method is rapid, amplification-free, simple, and sensitive, thus establishing a key technology toward a useful POC diagnostic platform.

The visible light absorbing CdS nanoparticles were partially modified with Au2S and Ag2S via a simple cation exchange process to prepare heterostructure photocatalysts (denoted as Au2S@CdS and Ag2S@CdS), which were employed for the conversion of aromatic alcohols to valued-added products, such as benzaldehyde and C-C coupling products, including deoxybenzoin and hydrobenzoin. When Au2S@CdS was used as the photocatalyst, benzaldehyde was obtained as the main product with a selectivity of 99%, and when Ag2S@CdS was used as the photocatalyst, deoxybenzoin was obtained as the main product with a selectivity of 95%. The critical photogenerated electron and hole transfer occurring during the photocatalytic reaction was systemically investigated by performing various control experiments and using in-situ high-resolution X-ray photoelectron spectroscopy. In addition, with the photocatalytic system proposed in this study, benzyl alcohol could be photoconverted into benzaldehyde or deoxybenzoin almost completely with high selectivity by altering the cocatalyst component via simple ion exchange.

Particulate methane monooxygenase (pMMO) is an enzyme that oxidizes methane to methanol with high activity and selectivity. Limited success has been achieved in incorporating biologically relevant ligands for the formation of such active site in a synthetic system. Here, we report the design and synthesis of metal-organic framework (MOF) catalysts inspired by pMMO for selective methane oxidation to methanol. By judicious selection of a framework with appropriate topology and chemical functionality, MOF-808 was used to postsynthetically install ligands bearing imidazole units for subsequent metalation with Cu(I) in the presence of dioxygen. The catalysts show high selectivity for methane oxidation to methanol under isothermal conditions at 150 °C. Combined spectroscopies and density functional theory calculations suggest bis(μ-oxo) dicopper species as probable active site of the catalysts.

Here we report the development of a high throughput, all-solution phase, and isothermal detection system to detect African Swine Fever Virus (ASFV). CRISPR-Cas12a programmed with a CRISPR RNA (crRNA) is used to detect ASFV target DNA. Upon ASFV DNA binding, the Cas12a/crRNA/ASFV DNA complex becomes activated and degrades a fluorescent single stranded DNA (ssDNA) reporter present in the assay. We combine this powerful CRISPR-Cas assay with fluorescence-based point-of-care (POC) system we developed for rapid and accurate virus detection. Without nucleic acid amplification, a detection limit of 1 pM is achieved within 2 hrs. In addition, the ternary Cas12a/crRNA/ASFV DNA complex is highly stable at physiological temperature and continues to cleave the ssDNA reporter even after 24 hrs of incubation, resulting in an improvement of the detection limit to 100 fM. We show that this system is very specific and can differentiate nucleic acid targets with closely matched sequences. The high sensitivity and selectivity of our system enables the detection of ASFV in femtomolar range. Importantly, this system features a disposable cartridge and a sensitive custom designed fluorometer, enabling compact, multiplexing, and simple ASFV detection, intended for low resource settings.

The time-resolved femtosecond stimulated Raman spectra (FSRS) of a charge transfer (CT) excited noncovalent complex tetracyanoethylene:1-chloronaphthalene (TCNE:ClN) in dichloromethane (DCM) is reported with 40 fs time resolution. In the frequency domain, five FSRS peaks are observed with frequencies of 534, 858, 1069, 1392, and 1926 cm–1. The most intense peaks at 534 and 1392 cm–1 correspond to fundamentals while the features at 858, 1069, and 1926 cm–1 are attributed to a difference frequency, an overtone and a combination frequency of the fundamentals, respectively. The frequency of the 1392 cm–1 fundamental corresponding to the central C═C stretch of TCNE•– is red-shifted from the frequency of the steady state radical due to the close proximity and electron affinity of the countercation. The observation of a FSRS band at a difference frequency is analyzed. This analysis lends evidence for alternative nonlinear pathways of inverse Raman gain scattering (IRGS) or vertical-FSRS (VFSRS) which may contrib...

Raman and photoluminescence (PL) spectroscopy are used to investigate dynamic structure–function relationships in methylammonium lead iodide (MAPbI3) perovskite. The intensity of the 150 cm–1 methylammonium (MA) librational Raman mode is found to be correlated with PL intensities in microstructures of MAPbI3. Because of the strong hydrogen bond between hydrogens in MA and iodine in the PbI6 perovskite octahedra, the Raman activity of MA is very sensitive to structural distortions of the inorganic framework. The structural distortions directly influence PL intensities, which in turn have been correlated with microstructure quality. Our measurements, supported with first-principles calculations, indicate how excited-state MA librational displacements mechanistically control PL efficiency and lifetime in MAPbI3—material parameters that are likely important for efficient photovoltaic devices.

Hybrid organic–inorganic perovskites have attractive optoelectronic properties including exceptional solar cell performance. The improved properties of perovskites have been attributed to polaronic effects involving stabilization of localized charge character by structural deformations and polarizations. Here we examine the Pb–I structural dynamics leading to polaron formation in methylammonium lead iodide perovskite by transient absorption, time-domain Raman spectroscopy, and density functional theory. Methylammonium lead iodide perovskite exhibits excited-state coherent nuclear wave packets oscillating at ~20, ~43, and ~75 cm−1 which involve skeletal bending, in-plane bending, and c-axis stretching of the I–Pb–I bonds, respectively. The amplitudes of these wave packet motions report on the magnitude of the excited-state structural changes, in particular, the formation of a bent and elongated octahedral PbI64− geometry. We have predicted the excited-state geometry and structural changes between the neutral and polaron states using a normal-mode projection method, which supports and rationalizes the experimental results. This study reveals the polaron formation via nuclear dynamics that may be important for efficient charge separation., Elucidating electron-phonon coupling in hybrid organic-inorganic perovskites may help us to understand the high photovoltaic efficiency. Here, the authors observe low-frequency Raman modes and related nuclear displacements of the Pb–I framework, indicating how these vibrational motions lead to polaron formation in perovskites.

A microfluidic sample preparation multiplexer (SPM) and assay procedure is developed to improve amplification-free detection of Ebola virus RNA from blood. While a previous prototype successfully detected viral RNA following off-chip RNA extraction from infected cells, the new device and protocol can detect Ebola virus in raw blood with clinically relevant sensitivity. The Ebola RNA is hybridized with sequence specific capture and labeling DNA probes in solution and then the complex is pulled down onto capture beads for purification and concentration. After washing, the captured RNA target is released by irradiating the photocleavable DNA capture probe with ultraviolet (UV) light. The released, labeled, and purified RNA is detected by a sensitive and compact fluorometer. Exploiting these capabilities, a detection limit of 800 attomolar (aM) is achieved without target amplification. The new SPM can run up to 80 assays in parallel using a pneumatic multiplexing architecture. Importantly, our new protocol does not require time-consuming and problematic off-chip probe conjugation and washing. This improved SPM and labeling protocol is an important step toward a useful POC device and assay.

Raman and photoluminescence (PL) spectroscopy are used to investigate dynamic structure-function relationships in methylammonium lead iodide (MAPbI

Intramolecular charge-transfer (ICT) dynamics, including reaction coordinates, structural changes, and reaction rate, has been noted experimentally and theoretically. Here we report the ICT dynamics of laurdan investigated by time-resolved fluorescence at extreme time resolution of 30 fs. A single high-frequency coherent nuclear wave-packet motion on the product potential surface is observed through the modulation of the fluorescence intensity in time. Theory and experiment show that this vibrational mode involves large displacement of the carbon atoms in the naphthalene backbone, which indicates that the naphthalene backbone coordinates are strongly coupled to the ICT reaction of laurdan, not the twisting or planarization of the dimethylamino group.

DNA is the hereditary material that contains our unique genetic code. Since the first demonstration of two-dimensional (2D) nanopatterns by using designed DNA origami ∼10 years ago, DNA has evolved into a novel technique for 2D and 3D nanopatterning. It is now being used as a template for the creation of sub-10 nm structures via either 'top-down' or 'bottom-up' approaches for various applications spanning from nanoelectronics, plasmonic sensing, and nanophotonics. This perspective starts with an histroric overview and discusses the current state-of-the-art in DNA nanolithography. Emphasis is put on the challenges and prospects of DNA nanolithography as the next generation nanomanufacturing technique.

We report the intramolecular charge-transfer (ICT) dynamics of 1-tert-butyl-6-cyano-1,2,3,4-tetrahydroquinoline (NTC6), a planar analogue of 4-(dimethylamino)benzonitrile (DMABN), by using time-resolved fluorescence (TRF) and TRF spectra (TRFS). TRFS allow accurate determination of the ICT dynamics free from the spectral relaxation caused by the solvation and vibronic relaxation. For NTC6 in tetrahydrofuran (THF), the locally excited (LE) state is populated exclusively presumably via a conical intersection from the initial photoexcited S2 (La) state, and the LE state undergoes ICT single exponentially with a time constant of 1.8 ± 0.2 ps. In acetonitrile, however, both LE (22%) and ICT (78%) states are populated from the S2 state, and the population in the LE state undergoes ICT in 800 ± 100 fs. The ICT state undergoes further relaxation in 1.2 ps along the solvation and the intramolecular nuclear coordinates involving the rotation of the amino group to form a twisted ICT state. Coherent nuclear wave packet motions of 130 cm(-1), which can be assigned to the -C≡N group bending mode, were observed in the TRF of the reactant (LE) and product (ICT) states, indicating that the ICT reaction is partially coherent. Compared with DMABN, the ICT dynamics of NTC6 are quite homogeneous, and we speculated on the narrow conformational distribution of NTC6 in the ground state along the rotation of the amino group due to its rigid structure.

The fluorescence changes of FlFlU moieties located at the terminal and mid-loop positions of the human i-motif sequence allow its probing as well as the sensing of G-quadruplex sequences.

Homogeneous oligodeoxyguanylates incorporating small-molecule intercalator pyrene moieties in a 1,5 relationship form various structures of dimer, trimer, tetramer and internal hairpin form that are yellowish in color because of the intermolecular interactions between the pyrene units.

Formation times of intramolecular charge-transfer (ICT) state of 4-(dimethylamnio)benzonitrile (DMABN) in acetonitrile are resolved by time constants of 30 fs, 180 fs, and 2.7 ps, denoting the ICT state can be created through multi ways.

Intramolecular charge transfer (ICT) of confined 1-tert-butyl-6-cyano-1, 2, 3, 4-tetrahydroquinoline (NTC6) is determined with a single time constant of ∼1 ps regardless of solvents, although ICT of 4-(dimethylamino)benzonitrile (DMABN) shows dispersive dynamics in solvents.

The effective removal of ionic pollutants from contaminated water using negatively charged nanofiltration membranes is demonstrated. Block copolymers comprising polystyrene (PS) and partially hydrogenated polyisoprene (hPI) were synthesized by varying chain architectures. A one step procedure of cross-linking (hPI blocks) and sulfonation reactions (PS chains) was then carried out, which was revealed as an effective method to enhance mechanical integrity of membranes while hydrophilic sulfonated chains remain intact. In particular, the control of chain architecture allows us to create a synergetic effect on optimizing charge densities of the membrane, water permeability, and mechanical integrity under water purification conditions. The best performing membrane can almost completely (>99%) reject various divalent cations and also show NO(3)(-) rejection > 85% and Na(+) rejection > 87%. Well defined nanostructures (tens of nanometers) as well as the periodically arranged water domains (a few nanometers) within hydrophilic phases of the hydrated membranes were confirmed by in situ neutron scattering experiments.