Search

The use of environmentally friendly materials such as bio-sourced plastics is being driven by increased awareness of environmental issues caused by synthetic plastics. However, bio-sourced plastics have poor fire behaviour that limits their application. The addition of a flame retardant to these plastics is one effective way to increase the fire resistance property; however, the flame retardant should not interfere with the mechanical performance of the plastic. Most flame retardants act as stress concentration points, reducing tensile strength. Hence, to create a balance between tensile strength and fire resistance, biochar (to conserve strength) and lanosol (to improve fire resistance) were added to wheat gluten bioplastic in various ratios and the optimal ratio was identified. Wheat gluten composites were fabricated using compression moulding at four different concentrations of lanosol (2, 4, 6, and 8 wt.%) and biochar (2, 4, 6, and 8 wt.%). From the test results, the composite with 4 wt.% lanosol and 6 wt.% biochar exhibited a good balance between the mechanical and fire properties; it conserved the strength and improved the fire properties (39 % reduction in peak heat release rate).

The physical properties of biocarbon vary widely with the biomass used, and the temperature and duration of pyrolysis. This study identifies the effects of feedstock characteristics and pyrolysis conditions on the production of biocarbon and the corresponding properties for industrial applications. For coffee chaff and soy hulls, ash content and carbon content increased with pyrolysis temperature and duration. Ash content increased thermal conductivity and specific heat, and decreased electrical conductivity. Change in surface area with pyrolysis conditions was dependent on type of feedstock. Increased surface area corresponded with increased thermal and electrical conductivity. Increased carbon content corresponded with increased graphitization and thermal stability and decreased surface functionality. Properties of soy hull biocarbons were found to be similar to the properties of other biocarbons with industrial applications such as incorporation into polymer composites.

A case of atypical Wilson disease is being reported. Possible mechanism of the process, diagnostic features and CT appearance of brain is described. Early detection and therapy with copper chelating agents result in neurologic and performance improvement of patients.