Search

Herein, we report the catalyst assisted growth of TiO2 one-dimensional (1D) nanowires (NWs) on alumina substrates by the thermal oxidation technique. RF magnetron sputtering was used to deposit a thin Ti metallic layer on the alumina substrate, followed by an Au catalytic layer on the Ti metallic one. Thermal oxidation was carried out in an oxygen deficient environment. The optimal thermal growth temperature was 700 °C, in a mixture environment composed by Ar and O2. As a comparison, Ti films were also oxidized without the presence of the Au catalyst. However, without the Au catalyst, no growth of nanowires was observed. Furthermore, the effect of the oxidation temperature and the film thickness were also investigated. SEM, TEM, and EDX studies demonstrated the presence of Au nanoparticles on top of the NWs, indicating that the Au catalyst drove the growth process. Raman spectroscopy revealed the Rutile crystalline phase of TiO2 NWs. Gas testing measurements were carried out in the presence of a relative humidity of 40%, showing a reversible response to ethanol and H2 at various concentrations. Thanks to the moderate temperature and the easiness of the process, the presented synthesis technique is suitable to grow TiO2 NWs for many different applications.

Herein, we report the catalyst assisted growth of TiO2 one-dimensional (1D) nanowires (NWs) on alumina substrates by the thermal oxidation technique. RF magnetron sputtering was used to deposit a thin Ti metallic layer on the alumina substrate, followed by an Au catalytic layer on the Ti metallic one. Thermal oxidation was carried out in an oxygen deficient environment. The optimal thermal growth temperature was 700 &deg, C, in a mixture environment composed by Ar and O2. As a comparison, Ti films were also oxidized without the presence of the Au catalyst. However, without the Au catalyst, no growth of nanowires was observed. Furthermore, the effect of the oxidation temperature and the film thickness were also investigated. SEM, TEM, and EDX studies demonstrated the presence of Au nanoparticles on top of the NWs, indicating that the Au catalyst drove the growth process. Raman spectroscopy revealed the Rutile crystalline phase of TiO2 NWs. Gas testing measurements were carried out in the presence of a relative humidity of 40%, showing a reversible response to ethanol and H2 at various concentrations. Thanks to the moderate temperature and the easiness of the process, the presented synthesis technique is suitable to grow TiO2 NWs for many different applications.

'Directing' block copolymer (BCP) patterns is a possible option for future semiconductor device patterning, but pattern transfer of BCP masks is somewhat hindered by the inherently low etch contrast between blocks. Here, we demonstrate a 'fab' friendly methodology for forming well-registered and aligned silicon (Si) nanofins following pattern transfer of robust metal oxide nanowire masks through the directed self-assembly (DSA) of BCPs. A cylindrical forming poly(styrene)-block-poly(4-vinyl-pyridine) (PS-b-P4VP) BCP was employed producing 'fingerprint' line patterns over macroscopic areas following solvent vapor annealing treatment. The directed assembly of PS-b-P4VP line patterns was enabled by electron-beam lithographically defined hydrogen silsequioxane (HSQ) gratings. We developed metal oxide nanowire features using PS-b-P4VP structures which facilitated high quality pattern transfer to the underlying Si substrate. This work highlights the precision at which long range ordered [similar]10 nm Si nanofin features with 32 nm pitch can be defined using a cylindrical BCP system for nanolithography application. The results show promise for future nanocircuitry fabrication to access sub-16 nm critical dimensions using cylindrical systems as surface interfaces are easier to tailor than lamellar systems. Additionally, the work helps to demonstrate the extension of these methods to a 'high [small chi]' BCP beyond the size limitations of the more well-studied PS-b-poly(methyl methylacrylate) (PS-b-PMMA) system.

Tungsten oxide nanowires have been synthetized by a simple thermal oxidation route in an oxygen atmosphere, at low vacuum pressure. The morphology of the nanostructures was investigated by scanning electron microscope (SEM). Chemical sensors were fabricated using tungsten oxide nanowires as active layer, directly deposited on the transducer. Gas sensing performances were evaluated towards some target chemical species (CO, NO2, NH3, Acetone, Ethanol). Firstly, a temperature screening was performed in presence of a fixed gas concentration, to determine the optimal working temperature of the sensors. Then, calibration curves for some chemical species were estimated. The influence of relative humidity was taken into account. Fabricated devices seem very promising for the detection of ammonia and carbon monoxide.