Search

Subscapularis failure is a troublesome complication following anatomic total shoulder arthroplasty (aTSA). Commonly discarded during aTSA, the long head of the biceps tendon (LHBT) may offer an efficient and cheap autograft for the augmentation of the subscapularis repair during aTSA. The purpose of this study was to biomechanically compare a standard subscapularis peel repair to 2 methods of subscapularis peel repair augmented with LHBT.18 human cadaveric shoulders (61 ± 9 years of age) were used in this study. Shoulders were randomly assigned to biomechanically compare subscapularis peel repair with (1) traditional single-row repair, (2) single row with horizontal LHBT augmentation, or (3) single row with V-shaped LHBT augmentation. Shoulders underwent biomechanical testing on a servohydraulic testing system to compare cyclic displacement, load to failure, and stiffness.There were no significant differences in the cyclic displacement between the 3 techniques in the superior, middle, or inferior portion of the subscapularis repair (P .05). The horizontal (436.7 ± 113.3 N; P = .011) and V-shape (563.3 ± 101.0 N; P .001) repair demonstrated significantly greater load to failure compared with traditional repair (344.4 ± 82.4 N). The V-shape repair had significantly greater load to failure compared to the horizontal repair (P .001). The horizontal (61.6 ± 8.4 N/mm; P .001) and the V-shape (62.8 ± 6.1; P .001) repairs demonstrated significantly greater stiffness compared to the traditional repair (47.6 ± 6.2 N). There was no significant difference in the stiffness of the horizontal and V-shape repairs (P = .770).Subscapularis peel repair augmentation with LHBT autograft following aTSA confers greater time zero load to failure and stiffness when compared to a standard subscapularis peel repair.

Background: Loss of initial reduction of the acromioclavicular joint after coracoclavicular (CC) ligament reconstruction remains a challenge for various repair techniques. Previous studies using polydioxanone suture cerclage augments for CC ligament reconstruction demonstrated poor clinical and biomechanical outcomes. Tape-style sutures have recently gained popularity because of their added stiffness and strength relative to traditional sutures. These tape cerclage systems have yet to be biomechanically studied in CC ligament reconstruction. Purpose: To determine the efficacy of a tape cerclage system as an augment to CC ligament reconstruction. Study Design: Controlled laboratory study. Methods: A total of 24 human cadaveric shoulders were utilized. These were divided into 4 repair groups: anatomic CC ligament reconstruction (ACCR), ACCR with a tape cerclage augment (ACCR + C), tendon graft sling with a cerclage augment (TGS + C), or tape cerclage sling alone (CS). The repairs underwent superior/inferior cyclic loading to evaluate for displacement. Specimens were visually inspected for cortical erosion by the tape cerclage after cyclic loading. Finally, the constructs underwent superior plane load-to-failure testing. Results: Less displacement after cyclic loading was observed in the ACCR + C (mean ± SD, 0.42 ± 0.32 mm), TGS + C (0.92 ± 0.42 mm), and CS (0.93 ± 0.39 mm) groups as compared with the ACCR group (4.42 ± 3.40 mm; P = .002). ACCR + C (813.3 ± 257.5 N), TGS + C (558.0 ± 120.7 N), and CS (759.5 ± 173.7 N) demonstrated significantly greater load at failure relative to ACCR (329.2 ± 118.2 N) ( P < .001). ACCR + C (60.88 ± 17.3 N/mm), TGS + C (44.97 ± 9.15 N/mm), and CS (54.52 ± 14.24 N/mm) conferred greater stiffness than ACCR (27.43 ± 6.94 N/mm) ( P = .001). No cortical erosion was demonstrated in any specimen after cyclic loading. Conclusion: In a cadaveric model at time zero, repairs utilizing a tape cerclage system confer significantly greater load to failure and stiffness, as well as decreased displacement with cyclic loading, when compared with traditional ACCR repair. Clinical Relevance: Tape cerclage augmentation may provide a useful augment for CC ligament reconstruction.

Purpose: During the COVID-19 pandemic, clinicians and researchers have increasingly used remote online assessments to pursue their activities, but mostly with tests not validated for videoconference administration. This study aims to validate the remote online administration of picture description in Canadian French neurotypical speakers and to explore the thematic unit (TU) checklist recently developed. Method: Spoken discourse elicited through the picture description task of the Western Aphasia Battery–Revised (WAB-R) was collected from Canadian French neurotypical speakers from Québec aged between 50 and 79 years old. Forty-seven participants completed the task in person, and 49 participants completed the task by videoconference. Videos of each discourse sample were transcribed using CHAT conventions. Microstructural variables were extracted using the CLAN (Computerized Language ANalysis) program, whereas thematic informativeness was scored for each sample using TUs. Chi-square tests were conducted to compare both groups on each TU; t tests were also performed on the total score of TUs and microstructural variables. Results: Groups were matched on sex, age, and education variables. The t tests revealed no intergroup difference for the total TU score and for the microstructural variables (e.g., mean length of utterances and number of words per minute). Chi-square tests showed no significant intergroup difference for all 16 TUs. Conclusions: These findings support remote online assessment of the picnic scene of the WAB-R picture description in Canadian French neurotypical speakers. These results also validate the 16 TUs most consistently produced. The use of videoconference could promote and improve the recruitment of participants who are usually less accessible, such as people using assistive mobility technologies. Supplemental Material: https://doi.org/10.23641/asha.21476961

It has been shown that subacromial bursa (SAB) harbors connective tissue progenitor cells. The purpose of this study was to evaluate the effects of implantation of SAB-derived cells (SBCs) suspended in a fibrin sealant bead and implantation of SAB tissue at rotator cuff repair site on biomechanical properties of the repair in a mouse (C57Bl/6) model of supraspinatus tendon (ST) detachment and repair.Part 1: Murine SAB tissue was harvested and cultured. Viability of SBCs suspended in 10 μL of fibrin sealant beads was confirmed in vitro and in vivo. Eighty mice underwent right ST detachment and repair augmented with either fibrin sealant bead (control group) or fibrin sealant bead with 100,000 SBCs (study group) applied at the repair site. Part 2: 120 mice underwent right ST detachment and repair and were randomized equally into 4 groups: (1) a tissue group, which received a piece of freshly harvested SAB tissue; (2) a cell group, which received SBCs suspended in fibrin sealant bead; (3) a fibrin sealant group, which received plain fibrin sealant bead without cells; and (4) a control group, which received nothing at the ST repair site. An equal number of mice in each group were killed at 2 and 4 weeks. Specimens underwent biomechanical testing to evaluate failure force (part 1 and 2) and histologic analysis of the repair site (part 1 only).Part 1: The mean failure force in the study group was significantly higher than controls at 2 and 4 weeks (3.25 ± 1.03 N vs. 2.43 ± 0.56 N, P = .01, and 4.08 ± 0.99 N vs. 3.02 ± 0.8 N, P = .004, respectively). Mean cell density of the ST at the repair site was significantly lower in the study group at 2 weeks than in controls (18,292.13 ± 1706.41 vs. 29,501.90 ± 3627.49, P = .001). Study group specimens had lower proteoglycan contents than controls, but this difference was not statistically significant. Part 2: There was no difference in failure force between cell and tissue groups at the 2- and 4-week time points (P = .994 and P = .603, respectively). There was no difference in failure force between fibrin sealant bead and control groups at the 2- and 4-week time points (P = .978 and P = .752, respectively).This study shows that the application of SBCs and SAB tissue at the rotator cuff repair site increases the strength of repair in a murine model of rotator cuff detachment and repair.

Various distal biceps tendon repair techniques exist, each with their own biomechanical profile. Recently, all-suture anchor fixation has recently become an intriguing option for distal biceps fixation, compared with the proven track record of the suspensory cortical button. In addition, intramedullary techniques have been utilized as a means to avoid complications such as nerve damage seen with extramedullary fixation.The purpose of this study is to perform a comparative biomechanical analysis of 4 unique distal biceps tendon fixation methods: Unicortical/intramedullary all-suture anchor fixation (UIAS), Bicortical/extramedullary all-suture anchor fixation (BEAS), Unicortical/intramedullary suspensory button fixation (UISB), and Bicortical/extramedullary suspensory button fixation (BESB).Controlled Laboratory study.24 fresh-frozen cadaveric elbows were randomized into 4 groups providing data from 6 specimens, with each group undergoing a different repair technique. The specimens underwent 2 studies: Cyclic loading and Ultimate Load to failure (ULTF) testing. The repaired elbows were cycled 3000 times between 0 and 90 degrees of flexion, with displacement under cyclic loading at the repair site measured using a differential variable reductance transducer. ULTF test was performed with the elbow flexed at 90 degrees. The modes of failure were recorded.The mean cyclic displacements between the 4 groups were as follows: UIAS: 1.45 ± 1.04 mm; BEAS: 2.75 ± 1.32 mm; UISB: 1.45 ± .776 mm; BESB: 2.66 ± 1.18 mm (p= 0.077). Bicortical repairs displayed greater displacement after cyclic loading when compared with unicortical repairs regardless of anchor used (p= 0.007). The mean ULTF for each group was as follows: all-suture intramedullary: 200 N; all-suture extramedullary: 330 N; cortical-button intramedullary: 256 N; cortical-button extramedullary: 342 N). All-suture unicortical/intramedullary repair had a significantly lower ULTF (200 N) compared with cortical-button Bicortical/extramedullary repair (342 N) (p=0.043).Bicortical/extramedullary suspensory button fixation demonstrated a greater ultimate load to failure when compared with unicortical/intramedullary all-suture anchor fixation. These findings suggest that bicortical/extramedullary suspensory cortical button fixation is a biomechanically superior construct as compared to unicortical/intramedullary all-suture anchor fixation. However, there was no significant difference in ULTF between extra-medullary, Bicortical button or Bicortical, all-suture anchor fixation.

To report the clinical outcomes after biologically augmented rotator cuff repair (RCR) with a fibrin scaffold derived from autologous whole blood and supplemented with concentrated bone marrow aspirate (cBMA) harvested at the proximal humerus.Patients who underwent arthroscopic RCR with biologic augmentation using a fibrin clot scaffold ("Mega- Clot") containing progenitor cells and growth factors from proximal humerus BMA and autologous whole blood between April 2015 and January 2018 were prospectively followed. Only high-risk patients in primary and revision cases that possessed relevant comorbidities or physically demanding occupation were included. Minimum follow-up for inclusion was 1 year. The visual analog score for pain (VAS), American Shoulder and Elbow Surgeons (ASES), Simple Shoulder Test (SST), Single Assessment Numerical Evaluation (SANE), and Constant-Murley scores were collected preoperatively and at final follow-up. In vitro analyses of the cBMA and fibrin clot using nucleated cell count, colony forming units, and live/dead assays were used to quantify the substrates.Thirteen patients (56.9 ± 7.7 years) were included. The mean follow-up was 26.9 ± 17.7 months (Arthroscopic rotator cuff repairs that are biologically augmented with a fibrin scaffold containing growth factors and autologous progenitor cells derived from autologous whole blood and humeral cBMA can improve clinical outcomes in primary, as well as revision cases in high-risk patients. However, the incidence of retears remains a concern in this population, demanding further improvements in biologic augmentation.IV, therapeutic case series.

Failed rotator cuff repairs present a complex issue for treating surgeons. Many methods of management exist for this pathology including revision repair with biologic augmentation, repairs with allograft, tendon transfers, superior capsular reconstruction, balloon arthroplasty, bursal acromial reconstruction, and reverse total shoulder arthroplasty. This review discusses the current literature associated with these management options.

Partial tears of the distal biceps tendon can be difficult to diagnose based on clinical examination and magnetic resonance imaging (MRI).Patients from a single surgeon's practice from 2000 to 2018 with a partial distal biceps tendon tear were retrospectively reviewed to determine the utility of the distal biceps palpation-rotation test in the detection of partial tears. This test is performed by palpating the bicipital tuberosity at the lateral forearm while ranging the forearm from supination to pronation with the arm adducted at the patient's side and the elbow flexed to 90°. A positive test elicits tenderness at the tuberosity with the arm in pronation but not in supination. Examination findings were correlated with MRI reports confirming a partial tear. Twelve cadaveric arms were dissected to determine overall pronosupination range of motion, the degree of pronation at which the bicipital tuberosity is maximally palpable, and anatomic measurements of the bicipital tuberosity to guide the optimal technique when carrying out the maneuver.Ninety-nine patients were diagnosed with a partial distal biceps tendon, of whom 34 had available MRI reports and complete physical examination documentation. Thirty-three of 34 patients (97%) had partial tears on MRI. The hook test was negative in all cases. All patients had tenderness with resisted supination. In those with MRI-confirmed partial tears, the palpation-rotation test was positive in all patients (100% sensitivity). The bicipital tuberosity was maximally palpated at the dorsolateral forearm at a mean 20° of pronation, and the proximal and distal boundaries of the radial tuberosity were 2.5 cm and 5.3 cm, on average, distal to the radial head, respectively.A positive palpation-rotation test was seen in 33 of 33 patients (100% sensitivity), as correlated with MRI. The combination of an intact distal biceps tendon within the antecubital fossa, tenderness on resisted supination, and a positive palpation-rotation test are highly suggestive of a partial distal biceps tendon tear.

Optimal treatment of irreparable rotator cuff tears is still debated. Proponents of the superior capsule reconstruction (SCR) have previously used fascia lata autograft and acellular dermal allograft. Interest is growing in using fascia lata allograft as a new graft material. Well-designed biomechanical studies are important to understand the mechanical properties of the superior capsular tissue and fascia lata allograft. Recent biomechanical research shows that fascia lata allograft has similar initial stiffness (over the first 2 mm) and ultimate load compared to the native superior capsule. That said, ultimate load is the load at which a construct fails, whereas the yield point is the load on the stress-strain curve at which a material transitions from elastic to plastic deformation. In the shoulder where the SCR, for example, is going to be repetitively loaded, it is potentially more meaningful to talk about the yield point in order to stay within the elastic range. Using this framework, the yield point for fascia lata allograft is approximately one third the yield point of native capsular tissue. Additionally, "initial" stiffness is not the entire story. At greater loads, fascia lata allograft has higher displacement compared to native tissue. Of importance, fascia lata allograft failed by sutures slowly cutting through the allograft tissue; this may represent a limitation of the construct that could be addressed using stitch configurations resistant to cut through. Fascia lata allograft is a promising solution for SCR. Biomechanical studies require nuanced interpretation, and most of all, do not evaluate clinical healing.

The Internet of Things (IoT) is rapidly developing in diverse and critical applications such as environmental sensing and industrial control systems. IoT devices can be very heterogeneous in terms of hardware and software architectures, communication protocols, and/or manufacturers. Therefore, when those devices are connected together to build a complex system, detecting and fixing any anomalies can be very challenging. In this paper, we explore a relatively novel technique known as Process Mining, which—in combination with log-file analytics and machine learning—can support early diagnosis, prognosis, and subsequent automated repair to improve the resilience of IoT devices within possibly complex cyber-physical systems. Issues addressed in this paper include generation of consistent Event Logs and definition of a roadmap toward effective Process Discovery and Conformance Checking to support Self-Healing in IoT.

The long-term changes of liver stiffness (LS) in patients who achieve viral clearance after direct-acting anti-HCV therapy remain undefined. We conducted a multicenter prospective study to investigate this aspect. Patients with HCV infection treated with DAAs were enrolled from six Italian centers; they underwent clinical, biochemical, ultrasound, and transient elastography evaluations before treatment (T0), 12 weeks (SVR12), and 24 months (T24) after the end of therapy. Among the 516 consecutive patients enrolled, 301 had cirrhosis. LS significantly decreased from T0 to SVR (14.3 kPa vs 11.1 kPa, p=0.002), with a progressive reduction until T24 (8.7 kPa, p

The digital transformation process fostered by the development of Industry 4.0 technologies has largely affected the health sector, increasing diagnostic capabilities and improving drug effectiveness and treatment delivery. The Digital Twin (DT) technology, based on the virtualization of physical assets/processes and on a bidirectional communication between the digital and physical space for data exchange, is considered a game changer in modern health systems. Digital Twin applications in healthcare are various, ranging from virtualization of hospitals' physical spaces/organizational processes to individuals' physiological/genetic/lifestyle characteristics replication, and include the modeling of public health-related processes for monitoring, optimization and planning purposes. In this paper, motivated by the current COVID-19 pandemic, we focus on the application of the Digital Twin technology for virus containment on the workplace through social distancing. The contribution of this paper is three-fold: i) we review the existing literature on the adoption of the Digital Twin technology in the healthcare domain, and propose a classification of DT applications into four categories; ii) we propose a generalized Digital Twin architecture that can be used as reference to identify the main functional components of a Digital Twin system; iii) we present CanTwin, a real-life industrial case study developed by Hitachi and representing the Digital Twin of a canteen service serving 1100 workers, set up for social distancing monitoring, queue inspection, people counting and tracking, table occupancy supervision.

Background Reverse total shoulder arthroplasty (RSA) primarily varies between 2 implant design options: a 135 humeral stem inclination that closely resembles anatomic orientation, versus the Grammont-style 155 humeral stem inclination that further medializes and distalizes the center of rotation (COR). The purpose of this study was to compare deltoid force, glenoid strain, and simulated glenohumeral range of motion (ROM) between RSA 135 and RSA 155 designs, with a series of standardized permutations of glenosphere offset and rotator cuff pathology. Methods Twelve fresh-frozen cadaveric shoulder specimens were studied using a shoulder simulator. Native shoulder motion profiles for reproducible abduction range of motion were established using a customized testing device. Optical 3-dimensional tracking and pressure sensors were used to accurately record glenohumeral range of motion (ROM), deltoid force, and glenoid strain for RSA 135 and RSA 155 designs. For each cohort, all combinations of glenosphere offsets and rotator cuff tendon involvement were evaluated. Results There was no significant difference in the overall abduction ROM between the 155 and the 135 humeral stem implants (P = .75). Resting abduction angle and maximum abduction angle were significantly greater with a 155 + STD (standard offset) construct than with a 135 + STD construct (P Conclusion Overall, range of motion between the 135 and the 155 humeral stem inclinations was not significantly different. The cumulative deltoid force was lower in RSA shoulders when compared to native shoulders with massive rotator cuff tears, highlighting the utility of both implant designs. The Grammont-style 155 stem coupled with a 2.5 mm inferior offset glenosphere required less deltoid force to reach maximum abduction than did the more anatomic, lateralized 135 stem coupled with a 4 mm lateral offset glenosphere. Level of Evidence Controlled Laboratory Study

Description of supplementary methods

Description of supplementary figures

Table S1. Characteristics of the healthy subjects (HS) and patients with liver cirrhosis (LC) and hepatocellular carcinoma (HCC)

Table S3. % 13C enrichment in cell lysates for13C-alanine (mitochondrial pyruvate labeling) and 13C-lactate (cytosol pyruvate labeling) obtained by 1H NMR analysis.

Legends for Supplementary Tables S1-S3 and Supplementary Figures S1-S7.

Tumor cell invasion is a process regulated by integrins, matrix-degrading enzymes, and interactions with host tissue stromal cells. The ADAM family of proteins plays an important role in modulating various cellular responses. Here, we show that an alternatively spliced variant of ADAM9 is secreted by hepatic stellate cells and promotes carcinoma invasion. ADAM9-S induced a highly invasive phenotype in several human tumor cell lines in Matrigel assays, and the protease activity of ADAM9-S was required for invasion. ADAM9-S binds directly to α6β4 and α2β1 integrins on the surface of colon carcinoma cells through the disintegrin domain. ADAM9-S was also able to cleave laminin and promote invasion. Analysis of human liver metastases revealed that ADAM9 is expressed by stromal liver myofibroblasts, particularly those that are localized within the tumor stroma at the invasive front. These results emphasize the importance of tumor-stromal interactions in invasion and suggest that ADAM9-S can be an important determinant in the ability of cancer cells to invade and colonize the liver.

Expression of LPAR1-5 mRNA levels in peritumoral and HCC cell lines (S1); Cell cycle analysis of LPAR6-knocked-down cells versus controls (S2); Absence of apoptosis in stably LPAR6-knocked-down cells (S3); LPAR6 knockdown impairs HCC migration and actin organization but not cells adhesion (S4); Ectopic expression of LPAR6 in human hepatocarcinoma cell line HLE (S5); LPAR6 knockdown affects the gene expression profile in HCC cells (S6); The PIM3 inhibitor, SGI-1776 decreases tumor growth in vivo and in vitro (S7).

List of genes up-regulated in LPAR6 knocked down cells.

Supplementary Figure S2 from A Secreted Form of ADAM9 Promotes Carcinoma Invasion through Tumor-Stromal Interactions

Description of additional methods and procedures used in the study.

List of genes down-regulated in LPAR6 knocked down cells.

Supplementary Figure S1 from A Secreted Form of ADAM9 Promotes Carcinoma Invasion through Tumor-Stromal Interactions

This study aimed to evaluate the influence of sodium monensin on the hepatic accumulation of copper in sheep. Twenty-four Santa Inês crossbred sheep were used and allocated in a 2 × 2 factorial experiment with six repetitions and considering the factors dietary copper (basal and high) and supplementation (with and without sodium monensin). Thus, four homogeneous groups were formed: control (basal diet); monensin (Mon), 30 ppm of monensin; copper (Cu), 10 10 mg/kg BW per day of copper; monensin + copper (MonCu). The experimental period lasted 14 weeks. Liver and bile samples were collected at the beginning and end of the experiment to determine mineral element concentrations, and weekly blood samples for biochemical, hematological, and mineral evaluation. Liver copper concentrations at the beginning of the experiment did not vary between groups, while mean liver copper concentrations at the end of the experiment were higher in the MonCu, Cu, and Mon groups when compared to the control. At the end of the study, hepatic copper concentration was influenced by copper (p = 0.0001) and monensin (p = 0.0003) supplementation. Copper-supplemented groups had reduced liver iron contents (p = 0.0287) and increased copper concentrations in bile. The biochemical evaluation showed increased serum GGT and AST activity (p 0.05) in the Cu and MonCu groups from the eleventh week on compared to the control and Mon groups. The increase in activity of these enzymes was influenced by copper supplementation (p = 0.0340). Monensin interferes positively with the hepatic accumulation of copper and the supplementation of this additive may predispose sheep to copper poisoning.

Background: Glenohumeral instability caused by bone loss requires adequate bony restoration for successful surgical stabilization. Coracoid transfer has been the gold standard bone graft; however, it has high complication rates. Alternative autologous free bone grafts, which include the distal clavicle and scapular spine, have been suggested. Study Design: Controlled laboratory study. Purpose: The purpose of this study was to determine the percentage of glenoid bone loss (GBL) restored via coracoid, distal clavicle, and scapular spine bone grafts using a patient cohort and a cadaveric evaluation. Methods: Autologous bone graft dimensions from a traditional Latarjet, congruent arc Latarjet, distal clavicle, and scapular spine were measured in a 2-part study using 52 computed tomography (CT) scans and 10 unmatched cadaveric specimens. The amount of GBL restored using each graft was calculated by comparing the graft thickness with the glenoid diameter. Results: Using CT measurements, we found the mean percentage of glenoid restoration for each graft was 49.5% ± 6.7% (traditional Latarjet), 45.1% ± 4.9% (congruent arc Latarjet), 42.2% ± 7.7% (distal clavicle), and 26.2% ± 8.1% (scapular spine). Using cadaveric measurements, we found the mean percentage of glenoid restoration for each graft was 40.2% ± 5.0% (traditional Latarjet), 53.4% ± 4.7% (congruent arc Latarjet), 45.6% ± 8.4% (distal clavicle), and 28.2% ± 7.7% (scapular spine). With 10% GBL, 100% of the coracoid and distal clavicle grafts, as well as 88% of scapular spine grafts, could restore the defect ( P < .001). With 20% GBL, 100% of the coracoid and distal clavicle grafts but only 66% of scapular spine grafts could restore the defect ( P < .001). With 30% GBL, 100% of coracoid grafts, 98% of distal clavicle grafts, and 28% of scapular spine grafts could restore the defect ( P < .001). With 40% GBL, a significant difference was identified ( P = .001), as most coracoid grafts still provided adequate restoration (congruent arc Latarjet, 82.7%; traditional Latarjet, 76.9%), but distal clavicle grafts were markedly reduced, with only 51.9% of grafts maintaining sufficient dimensions. Conclusions: The coracoid and distal clavicle grafts reliably restored up to 30% GBL in nearly all patients. The coracoid was the only graft that could reliably restore up to 40% GBL. Clinical Relevance: With “subcritical” GBL (>13.5%), all autologous bone grafts can be used to adequately restore the bony defect. However, with “critical” GBL (≥20%), only the coracoid and distal clavicle can reliably restore the bony defect.

Background: Adult-type soft tissue sarcomas (STSs) are rare tumors representing about 1% of all adult malignant tumors. Their extreme histological heterogeneity places them among the most challenging fields of diagnostic pathology. The variability of clinical and prognostic presentation between the various histotypes reflects the different management that should be followed on a case-by-case basis. These features make STSs the case in point of how important it is a centralized and multidisciplinary approach. Summary: Surgery represents the mainstay in the treatment of localized STSs. Recently, more and more studies are making efforts to understand what the contribution of chemotherapy and radiotherapy with neoadjuvant and adjuvant intent may be both in unselected and selected histological subgroups. In fact, despite the improvement in overall survival seen in the past few years thanks to the adoption of a more radical surgical approach, mortality remains relatively high and the 5-year overall survival is around 65%. Key Messages: In this review, we comment upon the treatment of localized STSs of the extremity, trunk wall, and retroperitoneum and how surgery, radiotherapy, and chemotherapy can be integrated with each other and individually tailored. Nomograms can assist clinicians in this complex therapeutic decision-making process, through the identification of patients at higher risk of death or disease relapse.

Nuclear Factors (NFs) rapidly scan the genome for their targets, but the role of nuclear organization in such search is unexplored. To address this, we combined live-cell single-molecule tracking of NFs with multifocal structured illumination of DNA density and characterized the exploration strategy of multiple NFs, including the tumor suppressor p53. p53 alternates between rapid diffusion in the interchromatin compartment (IC) and compact sampling of chromatin dense regions (CDs). This slowed down diffusion – mediated by p53 intrinsically disordered regions (IDRs) – directs p53 to its binding sites in CDs surrounded by IC channels. Efficient targeting requires balanced IDR/chromatin interactions: strong IDRs potentiate target gene activation, but excessive IDR/IDR interactions lead to p53 condensates, derailing its search and downregulating transcription. Our findings highlight the role of NF IDRs on their search and showcase a powerful method to generate traffic maps of the eukaryotic nucleus and dissect how nuclear organization guides NFs action.

Background Elliptical shape humeral head prostheses have been recently proposed to reflect a more anatomic shoulder replacement. However, its effect on obligate glenohumeral translation during axial rotation compared to a standard spherical head is still not well understood. The purpose of the study was to compare obligate humeral translation during axial rotation using spherical and elliptical shaped humeral head prostheses. It was hypothesized that the spherical head design would show significantly more obligate translation when compared to the elliptical design. Methods Six fresh-frozen cadaveric shoulders were utilized for biomechanical testing of internal (IR) and external (ER) rotation at various levels of abduction (0°, 30°, 45°, 60°) with lines of pull along each of the rotator cuff muscles. Each specimen underwent the following three conditions: (1) native; total shoulder arthroplasty (TSA) using (2) an elliptical and (3) spherical humeral head implant. Obligate translation during IR and ER was quantified using a 3-dimensional digitizer. The radius of curvature of the superoinferior and anteroposterior dimensions of the implants was calculated across each condition. Results Posterior and inferior translation as well as compound motion of spherical and elliptical heads during ER was similar at all abduction angles (P > 0.05, respectively). Compared to the native humeral head, both implants demonstrated significantly decreased posterior translation at 45° (elliptical: P = 0.003; spherical: P = 0.004) and 60° of abduction (elliptical: P 0.05). Conclusion In the setting of TSA, elliptical and spherical head implants showed similar obligate translation and overall compound motion during axial rotation. A gained understanding of the consequences of implant head shape in TSA may guide future surgical implant choice for better recreation of native shoulder kinematics and potentially improved patient outcomes. Level of evidence Controlled Laboratory Study.

Edible plants are gaining importance as an integrative therapy for many chronic diseases, including cancer. We first reported that the edible wild plant Crithmum maritimum L. inhibits the growth of hepatocellular carcinoma (HCC) cells by exerting a multitarget action on cellular metabolism and bioenergetic profile. Here, we show that Crithmum maritimum ethyl acetate extract significantly increases the responsiveness of HCC cells to the chemotherapeutic drug sorafenib by reducing lactic acid fermentation and inducing a pro-hepatocyte biomarker profile. Our findings strengthen the role of Crithmum maritimum L. as a valuable nutraceutical tool to support pharmacological therapeutic interventions in HCC.

In the past few years, evidence has supported the role of plants as a valuable tool for the development of promising therapeutic support options for many diseases, including cancer. We recently discovered that the edible wild plant Crithmum maritimum L. effectively inhibits the growth of hepatocellular carcinoma (HCC) cells and we provide insights into the biological mechanisms involved. Here, we aimed to characterize the effect of ethyl acetate extract of Crithmum maritimum on the bioenergetic phenotype of HCC cells and if this is associated with the anti-tumour effect we previously described. Results show that Crithmum maritimum significantly increases cellular respiration and reduces lactic fermentation in HCC cells, and that this reduction of the fermentative glycolytic phenotype is linked to inhibition of HCC growth. These data provide new preclinical evidence supporting the role of Crithmum maritimum L. as a nutraceutical option to expand the therapeutic opportunities in the management of HCC.

Treatment of aortic valve disease has become less and less invasive during the last years, thanks to progress in anesthesiology, surgical techniques, and perfusion management. In fact, it has been demonstrated that shorter skin incision, combined with ultra-fast-track anesthesia and minimized extracorporeal circuit could improve clinical outcomes. Current evidence shows that minimally invasive extracorporeal circulation system is associated with reduced red blood cells’ transfusion rate, improved end-organ perfusion, decreased incidence of postoperative atrial fibrillation, air embolism leakage, and so less cerebral accidents with better neurological outcomes. Moreover, the use of a closed circuit seems to be more physiologic for the patients, reducing systemic inflammatory response due to less air–blood contact and the use of biocompatible surfaces. In the literature, the benefits of minimally invasive extracorporeal circulation are described mostly for coronary surgery but few data are nowadays available for minimally invasive extracorporeal circulation during aortic valve replacement. In this article, we describe our perfusion protocol in minimally invasive aortic valve replacement.

Background and hypothesis The treatment of periprosthetic joint infection is complicated by the presence of residual biofilm, which resists eradication owing to bacterial adherence to orthopedic implants. The purpose of this study was to compare Bactisure (Zimmer Biomet, Warsaw, IN, USA), povidone-iodine (Betadine), and chlorhexidine gluconate solution (Irrisept; Irrimax, Gainesville, FL, USA) in reducing biofilm formation of Staphylococcus aureus, Staphylococcus epidermidis, and Cutibacterium acnes inoculated on cobalt-chrome, titanium, and stainless steel disks, representing metals commonly used for shoulder arthroplasty. The hypothesis was that there would be no significant difference in biofilm reduction among the 3 topical adjuvants. Methods Strains of S aureus (ATCC 35556), S epidermidis (ATCC 35984), and C acnes (LMG 16711) were grown on cobalt-chrome, titanium, and stainless steel disks. For each strain, the disks were divided into 4 groups: (1) control, (2) povidone-iodine (Betadine), (3) chlorhexidine gluconate (Irrisept), and (4) Bactisure. Bacteria were grown on 5% sheep blood agar plates. Biofilm eradication was quantified using adenosine triphosphate bioluminescence and compared with controls 48 and 72 hours after implementation of the topical adjuvant. Results At 72 hours after implementation of the topical adjuvant, a statistically significant reduction in colony-forming units was observed for all topical adjuvants across all tested metals, as compared with their respective control. With respect to the topical adjuvants themselves, Bactisure more consistently demonstrated the most significant reduction in colony-forming units across all bacteria when the tested medium was adjusted for, with the exception of S aureus, which showed similar results to Betadine at 72 hours. Conclusion By use of commonly encountered topical adjuvants on S aureus–, S epidermidis–, and C acnes–inoculated disks of various implant metals, a significant reduction in biofilm production was observed. Bactisure, a recent Food and Drug Administration–approved topical adjuvant, demonstrated the overall greatest efficacy of the agents studied.

As recurrent rotator cuff tears following repair remain a significant problem, improving healing potential using biologic adjuvants, including concentrated bone marrow aspirate (cBMA), platelet-rich plasma (PRP), or subacromial bursa tissue (SBT), has become increasingly popular in recent years. In an attempt to combine the benefits of these various biologic adjuvants and maximize the healing potential of the repaired tendon, an arthroscopic rotator cuff repair technique biologically augmented with autologous SBT, cBMA, PRP, platelet-poor plasma (PPP), and bovine thrombin has been developed. The created clot is used as a biologic scaffold for sufficient delivery, and it is stabilized using bovine thrombin in order to ensure maximum stability and retainment of the applied biologic augments at the repair site. Classifications I: shoulder; II: rotator cuff., Technique Video Video 1 Arthroscopic rotator cuff repair augmented with autologous subacromial bursa tissue, concentrated bone marrow aspirate, platelet-rich plasma, platelet-poor plasma, and bovine thrombin.

AimsTissue adhesives (TAs) are a commonly used adjunct to traditional surgical wound closures. However, TAs must be allowed to dry before application of a surgical dressing, increasing operating time and reducing intraoperative efficiency. The goal of this study is to identify a practical method for decreasing the curing time for TAs.MethodsSix techniques were tested to determine which one resulted in the quickest drying time for 2-octyle cyanoacrylate (Dermabond) skin adhesive. These were nothing (control), fanning with a hand (Fanning), covering with a hand (Covering), bringing operating room lights close (OR Lights), ultraviolet lights (UV Light), or prewarming the TA applicator in a hot water bath (Hot Water Bath). Equal amounts of TA were applied to a reproducible plexiglass surface and allowed to dry while undergoing one of the six techniques. The time to complete dryness was recorded for ten specimens for each of the six techniques.ResultsUse of the Covering, OR Lights, and Hot Water Bath techniques were associated with a 25- (p = 0.042), 27- (p = 0.023), and 30-second (p = 0.009) reduction in drying time, respectively, when compared to controls. The UV Light (p = 0.404) and Fanning (p = 1.000) methods had no effect on drying time.ConclusionUse of the Covering, OR Lights, and Hot Water Bath techniques present a means for reducing overall operating time for surgeons using TA for closure augmentation, which can increase intraoperative efficiency. Further studies are needed to validate this in vivo. Cite this article: Bone Jt Open 2022;3(8):607–610.