Search

In the past few years, there has been a resurgence in studies towards space-based optical/infrared interferometry, particularly with the vision to use the technique to discover and characterise temperate Earth-like exoplanets around solar analogues. One of the key technological leaps needed to make such a mission feasible is demonstrating that formation flying precision at the level needed for interferometry is possible. Here, we present $\textit{Pyxis}$, a ground-based demonstrator for a future small satellite mission with the aim to demonstrate the precision metrology needed for space-based interferometry. We describe the science potential of such a ground-based instrument, and detail the various subsystems: three six-axis robots, a multi-stage metrology system, an integrated optics beam combiner and the control systems required for the necessary precision and stability. We end by looking towards the next stage of $\textit{Pyxis}$: a collection of small satellites in Earth orbit., Comment: 27 Pages, 14 Figures, submitted to JATIS

For a remote sensing optical payload to achieve a Ground Sampling Distance of ~ 10-30 m, a critical problem is platform-induced motion blur. While forward motion compensation can reduce this transit speed, it comes at the expense of a more challenging satellite attitude control system and induces a variable observation/illumination angle. This relative motion can be frozen out by simply reading the sensor system at a frame rate that matches the ground resolution element's pixel crossing time. To achieve high resolution using this Time-Delay Integration (TDI)-like approach requires high speed and hence near "zero" readout noise detector arrays to avoid swamping the observed signal. This requires associated control electronics for fast frame readout and direct interface with smart- Artificial Intelligence (AI) onboard processing. With this technique, the platform freezes out its movement concerning the ground, reducing the demands placed on the attitude control systems, which can otherwise be difficult to implement on a small satellite platform. Here we report the Australian National University's OzFuel mission which applies this technical solution to deliver high ground resolution via high frame rate imaging. OzFuel is built around the Leonardo SAPHIRA Mercury Cadmium Telluride linear mode electron avalanche photodiode (LMeAPD) detector and the in-house developed Rosella electronics control system. The mission will deliver an integrated sensor system in a suite of Short-Wave Infrared (SWIR) passbands dedicated to monitoring the flammability of Eucalypt trees. The OzFuel mission concept focuses on the application of SWIR remote sensing data to deliver a strategic evaluation of fuel loads and moisture content in the bushfire-prone Australian environment., Comment: 73rd International Astronautical Congress (IAC), Paris, France, September 2022

We have initiated the High-Altitude Ballooning programme at Indian Institute of Astrophysics, Bangalore, in the year 2011 with the primary purpose of developing and flying low-cost scientific payloads on a balloon-borne platform. The main aim is the observations of extended nearby objects (e.g. comets) and of diffuse sources (e.g. zodiacal light or airglow) with wide field of view (FOV) UV instruments from near space (20 to 30 km). A brief summary and the results of the tethered flights carried out at IIA CREST campus are given in Ref.~1. Here we present an overview of the nine free-flying balloon experiments conducted from March 2013 to November 2014. We describe the launch procedures, payloads, methods of tracking and recovery. Since we fall in the light balloon category --- payload weight is limited to less than 6 kg --- we use the 3-D printer to fabricate lightweight boxes and structures for our experiments. We discuss the flight and scientific data obtained from different launches and the development of the in-house lightweight sensors and controllers, as well as a fully-fledged 2-axis pointing and stabilization system, for the flights., 21 pages, 33 Figures