Search

The aim of the paper consist in the synthesis of double substituted carbonated hydroxyapatite using Zn2+ and Mg2+ ions in comparison with the previous obtained Sr-Zn-CHAp. Fourier transform infrared spectroscopy, X-ray diffraction, environmental scanning electron microscope (ESEM) coupled with EDS is used to highlight the presence of the metallic ions into the apatite structure. Both inorganic compounds are tested as consolidants for two types of fir wood, young and 30-years old samples. The consolidation efficiency is demonstrated by colorimetric analysis, mechanical tests and the specific methods for water absorption behavior. Stronger specimens, especially of young wood, with no significant color differences, more hygroscopic and with higher hysteresis index result after treatment. In conclusion, carbonated hydroxyapatite double substituted with zinc, magnesium and strontium ions can be used in wood preservation-conservation techniques.

The aim of the paper consists in assessing the protection of fir wood samples against UV degradation by using polyacrylates and titanium dioxide as absorber. The irradiation was achieved for 648 hours, considered as about 2 years of weathering. Colorimetric, water absorption, and mechanical investigations were performed on samples before and after irradiation. The structural changes were evidenced by FTIR spectroscopy. Small changes in color for coated wood samples are observed after maximum 648 h of UV treatment, with the best results obtained for the specimen covered with Paraloid B72-TiO2. Higher compressive strengths were observed for the polymer-TiO2 coatings, in correlation with a smaller water absorption capacity of the studied samples. FTIR revealed shifted peaks with increased intensities as proof of structural changes produced by irradiation of lignin and polyacrylates. The results highlight that Paraloid B72 and Paraloid B67 mixed with TiO2 can be used as efficient UV protective coatings for fir wood.

The present work aims to study the adsorption processes and the photochemical depollution of the waters contaminated with Direct Orange textile dyes - 26 released into the water. Also, the paper shows the polysulfone (PSf) membranes, used for adsorption processes of the textile dyes azo - direct-orange-26, presenting the kinetics and experimental adsorption conditions for such processes. Advanced oxidation processes (AOP) processes used in photochemical depollution technologies are studied for water contaminated with Direct Orange 26 textile dye, after a preliminary adsorption process, with ZnFe2O4 ferrite photocatalysts.

The aim of this study was to address one of the major challenges of the conservation state of wooden artifacts or artworks namely, the preservation and restoration of wood surfaces. The factors involved in the deterioration of wood are mainly the external factors such as fire, low temperature and microbiological agents, which induce some degradation processes in wood, identified by discoloration, fragility and unsightly appearance. In this study, biodegradable materials based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) and composites based on PHBHV and particles (zinc oxide (ZnO), carbonated hydroxyapatite (CHAp) and its metallic derivatives with silver (AgCHAp) and strontium (SrCHAp) were applied on firwood specimens in order to investigate their consolidation capacity. Colorimetric measurements have confirmed that the chosen treatments did not change the colour of the natural wood. The hardness test revealed that the consolidation system increases the mechanical properties of the samples. The used treatments confer a strong hydrophobic character which prevents exfoliation of the wood samples, as confirmed by the performed water absorption test.

In this paper, multi-walled carbon nanotubes have been prepared at low synthesis temperatures and without high pressure by a simple chemical route. Fourier transformed infrared spectroscopy, Raman ...

This paper aims with the preparation of Sr2+ and Zn2+ double substituted carbonated hydroxyapatite (Sr-Zn-CHAp) by the nanoemulsion method and to evaluate its consolidation capacity on artificial stone samples. The changes in CHAp lattice parameters were observed by a synergy between the shrinkage and dilatation induced by the two metallic ions, with different ionic radii by comparison with calcium. The changed morphology obtained by calcination was evidenced by SEM analysis. Also, the tendency to agglomerate of the double substituted CHAp as micron- and sub-micron-sized particles with spherical and irregular form was observed. The FTIR, XRD and EDS results confirmed that the CHAp was successfully substituted with Sr2+ and Zn2+ by replacing Ca2+ resulting a AB-type CHAp. The efficacity of Sr-Zn-CHAp as inorganic consolidant for the stone was tested by mechanical strength, resistance at freeze–thaw artificial aging test, thermal shock weathering, colorimetric changes of the artificial stone sample, all the results being correlated with the water absorption test, water repellency, and pore structure changes. By treating the stone with 0.5 g/L Sr-Zn-CHAp led to an improvement of the above-mentioned characteristics, without significant chromatic changes.

The aim of this paper is to analyze the construction materials (mortars) of an architectural monument (Deserted Tower (Lilly Tower) from Corvins&rsquo, Castle, Romania). The mortars were characterized following a multidisciplinary approach, combining macroscopic observation with petrographic microscopy, mineralogical analysis (X-ray diffraction) and elemental analysis (X-ray fluorescence), hydric properties, and color of representative samples of the monument. The results revealed the use of gypsum mortars (produced by lumps with higher Fe content), with minor concentrations of crystalline dolomites of the Southern Carpathians, calcite, and quartz. The materials&rsquo, effective porosity and their water absorption capacity were high. A possible solution to consolidate the damaged area with some consolidation products (hydroxyapatite carbonate and its derivatives with Ag and Sr) was investigated, too. The interactions between the mortar&rsquo, s specimens and the effectiveness of the consolidation treatments were evaluated by physico-chemical analyses (molecular structure by X-ray powder diffraction (XRPD), wavelength dispersive X-ray fluorescence (WDXRF), dynamic light scattering (DLS)), morphological characterization by microscopic techniques as SEM-EDS, TEM, and physical and mechanical investigations (peeling test and compressive strength). Results were drawn based on historical, in situ observations, and analytical data, and put into evidence the composition, high weathering degree, and the possibility to surface consolidate with Sr-CHAp.

In recent years, the rapid development of electronic equipment led to millions of tons of waste printed circuit boards (WPCB) generated in the entire world rising important concerns regarding its recycling. Besides the metals recovery, intensively studied, the reuse of the nonmetals is especially difficult. In this study, the non-metallic fraction from the waste of printed circuit boards is used as reinforcing filler of a styrene-butadiene block-copolymer. The composites were characterized by mechanical and dynamo-mechanical analysis and thermo-gravimetry. The study aimed the reintroduction into the economic circuit of WPCB as composites suitable for the production of shoe soles injected directly on the footwear faces and as bitumen modifiers for road coverings.

The current work deals with specific investigations on the ceramic fragment samples from the archaeological site of Topolița (Eastern Romania), which is essentially unexplored to date. X-ray diffraction (XRD) has shown that the ceramics contain quartz, berlinite, mica (muscovite), calcite, and opaque minerals, such as hematite. All evidence indicates the use of raw materials with a low limestone content (poor Ca clays) for the manufacture of these ceramics (Ca < 3.6%). The wavelength dispersive X-ray fluorescence (WDXRF) measurements indicated the presence of Al, Si, Fe, Ca, Zn, P, and K. All these data are well correlated with energy dispersive spectroscopy (EDS), which is used as an additional technique of scanning electron microscopy (SEM). Through thermogravimetry and porosimetry, some information have been obtained, with the results being correlated with the chromatic parameters that characterize the samples after burning: Various shades of color (red color with sparkles and partially or totally black interior), differently colored engobes, white pigment encrusted with white color from calcite, gypsum, clays, and quartz, as well as carbon deposits in the pores of the pottery, all specific to the Chalcolithic ceramics from this region. The recorded FTIR spectra of these samples led to the identification of calcite, quartz, gypsum, and aluminum phosphate, present as berlinite in all the pottery specific to this area. In addition, the presence/absence and the amount of specific chemical elements in the white pigments (e.g., calcium, aluminum, phosphorus, silicon, sulfur) could be used as indicative for the identified mineral compounds (XRD and FTIR). Calcite and silica-rich sediments as the primary decoration pigments, have been identified in this case.

The high global production of electric and electronic equipment increases in the same manner the amount of the waste that needs to be recycled. Special attention is given to the plastics recycling from the waste in addition to the metals recovery that brings economic advantages. Considering that the plastic amount contains about 80% polystyrene polymers, the paper presents a recycling study of this fraction as reinforcing agent for a styrene-butadiene block copolymer. In order to reduce the melt viscosity, some of the composites were extended with paraffin-naphthenic �heavy white oil�. The blends were characterized by mechanical testing, thermal and dynamo-mechanical analysis. Based on the resulted properties, it can be concluded that the extended and reinforced composites can be used as material for shoe soles.

In this review we present an updated survey of the main synthesis methods of gold nanoparticles (AuNPs) in order to obtain various tailored nanosystems for biomedical imaging. The synthesis approach significantly impacts on the AuNPs properties such as surface chemistry, biocompatibility and cytotoxicity. In recent years, nanomedicine emphasized the development of functionalized AuNPs for biomedical imaging. AuNPs are a good option for used as delivery photosensitizer agents for PDT of cancer. For example, the complex formed from AuNPs functionalized with PEGylate porphyrins presents several advantages in the medical field such as a better use in photodynamic therapy because of high triplet states and singlet oxygen quantum yield efficiency of porphyrin molecules.

This study aims to provide an overview of the main polyhydroxyalkanoates (PHAs) used in medical applications. In this review, it has been demonstrated that the properties of PHAs can be controlled both by varying the concentration of units in the copolymer and the substrate for PHA production. Another way of controlling the mechanical properties of PHAs is varying the 3HV content, such as the case of P(3HB-co-3HV). A higher 3HV content in the structure of this polyester will lead to a lower cristallinity and, therefore, to greater flexibility, strength and elongation at break. PHAs are biocompatible, completely biodegradable, and non-toxic. Considering the state of the art technologies and their ideal properties, PHAs (especially the short-chain-length PHA polymers) can be tailored for specific medical applications, such as surgical suture, scaffolds, grafts and heart valves or drug delivery systems. Nowaday, random copolyesters of 3HB and 4HB (P(3HB-co-4HB)) are used for the development of biodegradable implants loaded with antibiotics for therapeutic treatment of chronic osteomyelitis. It is also believed that these biodegradable materials can be efficient alternatives for reducing the pollution produced by the medical waste consisting of replacing plastic handles, packs, syringes or tubes that are trashed into the homes, clinics and hospitals around the world.

Waste electrical and electronic equipment (WEEE) generated in large amounts due to the development of IT and telecommunication industry is considered an important concern for environmental protection. The complex polymer composition of WEEE can be determined in order to consider a proper recycling process for polymeric materials. The aim of the study was to identify the constituent polymers by: density, burning test, solubility, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), thermo-gravimetric analysis (ATG). The research led to a majority of polystyrenic polymers, together with polyesters, polycarbonates and polyamides.

This paper presents the solvents effect on the mechanical and thermal properties of films of styrene-butadiene and styrene-isoprene block copolymers with the majority diene phase, obtained by spin casting.

Innovative composites based on polypropylene waste impurified cu HDPE (PPW) combined with two thermoplastic block-copolymers, namely styrene-butadiene-styrene (SBSBC) and styrene-isoprene-styrene (SISBC) block-copolymers, and up to 10 wt% nano-clay, were obtained by melt blending. SBSBC and SISBC with almost the same content of polystyrene (30 wt%) were synthesized by anionic sequential polymerization and used as compatibilizers for PPW. Optical microscopy evaluation of the PPW composites showed that the n-clay was encapsulated into the elastomer. Addition of n-clay, together with SBSBC or SISBC, increased the interphase surface of the components in the PPW composites and enhanced the superficial area/volume ratio, which led to a recycled material with improved performance. The data resulting from differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), mechanical evaluation, and dynamic mechanical analysis (DMA) revealed that PPW reinforcement with n-clay and styrene-diene block-copolymers allows the obtaining of composites with favorable mechanical and thermal properties, and excellent impact strength for potential engineering applications.

In this work, new treatments based on multi-walled carbon nanotubes (MWCNTs), MWCNTs decorated with zinc oxide (ZnO), MWCNTs decorated with hydroxyapatite (HAp) and MWCNTs decorated with silver (Ag) nanoparticles dispersed in PHBHV solution are proposed for improving sound oak wood properties. We hypothesize that the solutions containing decorated MWCNTs will be more efficient as wood consolidants, not only because of the improved mechanical properties of the treated wood but also because of the hydrophobic layer created on the wood surface. In order to test these hypotheses, the treatments’ potential was investigated by a number of complex methods, such as colorimetric parameter measurements, water absorption tests, mechanical tests, artificial aging and antifungal tests. The data confirm that the treated wood materials have moderate stability, and the color differences are not perceived with the naked eye. A significant improvement of the treated samples was observed by water absorption, humidity and mechanical tests compared to untreated wood. The best results were obtained for samples treated by brushing with solutions based on decorated CNTs, which confirms that a uniform and thicker layer is needed on the surface to ensure better protection. The wood behavior with accelerated aging revealed that the control sample degraded faster compared to the other treated samples. Antifungal tests showed that higher growth inhibition was obtained for samples treated with 0.2% MWCNTs_ZnO + PHBHV. Considering all of the obtained results, it can be concluded that the most effective treatment was MWCNTs_ZnO + PHBHV at a nanocomposite concentration of 0.2%, applied by brushing. Thus, wood protection against mold and fungi will be achieved, simultaneously ensuring improved mechanical strength and water barrier properties and therefore maintaining the structural integrity of sound oak wood over time.

(1) Background: Due to the precarious situation of many monuments or archeological sites, analytical investigations are necessary to obtain information about the used materials, as well as to identify the most appropriate solutions for their conservation/restoration. This paper addresses the characterization of mural painting fragments collected during the excavation in 2018 in Rapoltu Mare (La vie), Deva. (2) Methods: Specific analytical techniques were used, as follows: X-ray diffractometry (XRD), wavelength dispersive X-ray fluorescence (WDXRF), optical microscopy (OM), zoom microscopy and scanning electron microscopy (SEM), spectroscopic techniques (UV–Vis, FTIR, Raman), porosity and thermal analysis, all of which provide information about the structure, chemical composition, morphology and topography of pigments and their deterioration as well. (3) Results: Up to seven different pigments were identified: Egyptian blue, carbon, calcite, gypsum, hematite, goethite and green earth. Egyptian Blue is identified in all the other color areas, except the white area: in the green zone (as degradation product with beeswax) and in the red zone (in mixture with ochre) too. In addition, carbon and beeswax were highlighted as toner and binder for pigments, respectively. In the presence of the organic beeswax binding environment, the Egyptian blue pigment particles darkened or turned yellow significantly, changing the blue to a greenish color. It is also possible to identify wollastonite (CaSiO3) in the blue pigment, which indicates that the temperature used in the manufacturing of Egyptian blue was higher than 950 °C from thermal analysis. The presence of apatite, hematite and gypsum deposits in the Hunedoara region certifies that these pigments could have been of local origin, as demonstrated by the presence of analytically identified elements (Fe, P, S, Ca). (4) Conclusions: The analytical techniques used for such investigations have highlighted the main pigments used in Roman times for various Roman murals.

Carbonated hydroxyapatite (CHAp) is an inorganic compound with various applications that presents better homogeneity and consolidating effect than HAp [1]. [...]

Carbon nanotubes (CNTs) have attracted attention, due to their structures as well as their ability to present multiple walls. [...]

In the last several years, the electronic waste, especially printed circuit boards have significantly increased over the world, generating one of the highest rates of solid waste. The recycling process of the printed circuit boards implies mainly the recovery of metals and glass fibers, while the reuse of the polymeric support has remained largely in the phase of research. In this paper, the non-metallic part of printed circuit boards was used as filler (up to 30%), but also to improve the fire resistance of thermoplastic composites based on recycled polypropylene and diene block-copolymers. The synergy between the elastic effect of elastomers and the reinforcing effect of the waste powder into the thermoplastic matrix was studied by mechanical and dynamo-mechanical analysis, X-ray diffraction, optical microscopy, micro-calorimetry and thermo-gravimetrical analysis. Improved mechanical properties, especially impact strength was observed. The compatibization of components considering the interactions between the ethylene-butylene blocks from the hydrogenated and maleinized styrene-butadiene block-copolymer and recycled polypropylene, respectively between the MA groups and the functionalities of the waste powder, evidenced by FTIR, was highlighted by changes in the X-ray pattern and an increased fire resistance and thermal stability.

The paper presents the polystyrene reinforcing effect of some styrene-diene block-copolymers on the physical-mechanical characteristics and thermal degradation stability of the associated composites.

This paper presents a modification study of recovered polypropylene by melt alloying with a styrene-isoprene block-copolymer blend, thus ensuring the optimum conditions to obtain polypropylene composites with performance impact strength.

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processing is investigated by the use of styrene-isoprene-styrene triblock copolymers (SIS). Thus, SIS block copolymers up to 20 wt.% in content with respect to rPP were introduced into the melted polymeric matrix by means of a twin rolls under the processing temperature of 185-190 C. The mechanical, thermal and structural properties of rPP/SIS blends have been studied with regard both to the content of SIS from blends and of polystyrene (PS) from SIS. The obtained results showed that the used SIS block copolymers led to the decrease of the degree of crystallinity and to increase of crystallite sizes of blends, with SIS20-10% being the most pronounced effect. Although by introduction of SIS into rPP a slight decrease of tensile strength is recorded, a remarkable increase on elongation at break and impact strength of rPP/SIS blends are exhibited. The good mechanical properties were achieved even by using of 10 wt% SIS.

The study aimed to synthesize nanofibers based on styrene-ethylene-butylene-styrene block-copolymers (SEBS) [1] and its composite derivatives, through the electrospinning (Figure 1) process [2]. [...]

Cultural monuments are subject to a degrading phenomenon induced by several factors, such [...]

As the development of the textile industry has progressed, intense concerns have been focusedon the contamination of the environment caused by dye pollutants [...]

The benefits of Capsicum annuum L. are important for human health with its anti-inflammatory [...]

Graphene and its derivatives have attracted considerable attention in recent years as potentialmaterials for various applications because of their unique physical-chemical properties [...]

The organic part of the waste printed circuit board (WPCB) contains mainly epoxy resin, fiberglass and brominated flame retardants, a composition that makes it quite difficult to reuse [1,2]. [...]

Chronic neuropathic pain, particularly peripheral pain, is a cause of great concern for diabetic patients. Current treatments include numerous agents such as capsaicinoids, a known deterrent of neuropathic pain despite the inconvenience associated with local side effects. In this context, the current work aims to elucidate the potential mechanisms involved in cytotoxicity by capsaicin and proposes an efficient formulation of capsaicin in alginate microcapsules, which significantly reduces side effects from capsaicin topical administration. For this, human dermal fibroblast cells were treated with alginate-microencapsulated capsaicin extracts and screened for potential cytotoxic effects produced by the treatment. Cell viability and morphology were examined, as well as oxidative stress status and anti-inflammatory potential. Our results show that the alginate encapsulated formulation of capsaicin exerted lower cytotoxic effects on human dermal fibroblasts as measured by cell viability and reactive oxygen species (ROS) production. Furthermore, the expression profiles of inflammatory cytokines were significantly altered by the treatment as compared with the control culture.

Tough and flexible dielectrics were prepared using graphite (G), a natural and low-cost resource, as filler in polystyrene-b-(ethylene-co-butylene)-b-polystyrene (SEBS) and maleinized SEBS (SEBS-MA) matrices. The disintegration of graphite in submicron particles was accomplished by the shear forces during the melt processing step and it was highlighted by atomic force microscopy. Simultaneous increase of tensile strain, strength and Young's modulus was noticed for SEBS/G and SEBS-MA/G composites compared to unfilled matrices, this remarkable feature being previously reported only for some nanocomposites. Moreover, an exponential variation of the dielectric permittivity with the volume fraction of G was obtained. Higher reinforcing efficiency and better dielectric properties were observed in SEBS-MA/G composites, compared to the corresponding SEBS/G composites, due to the stronger polymer–filler interface and better dispersion of graphite. This study brings new insights into nanolevel properties of SEBS composites and it opens new perspectives on high performance composites by using graphite instead of expensive graphene and efficient melt mixing process.

In the last few years, the preservation of cultural heritage has become an important issue globally, due to the fact that artifacts and monuments are continually threatened by degradation. It is thus very important to find adequate consolidators that are capable of saving and maintaining the natural aspect of these objects. This study aims to provide an updated survey of the main nanomaterials used for the conservation and restoration of cultural heritage. In the last few years, besides the classic nanomaterials used in this field, such as metal nanoparticles (copper and silver) and metal oxides (zinc and aluminum), hydroxyapatite and carbonated derivatives, tubular nanomaterials (such as carbon nanotubes) have been used as a potential consolidate material of cultural heritage. Tubular nanomaterials have attracted attention for use in different fields due to their structures, as well as their ability to present multiple walls. These nanotubes have the necessary properties in preserving cultural heritage, such as superior mechanical and elastic strength (even higher than steel), high hydrophobicity (with a contact angle up to 140°), optical properties (high photodegradation protection), large specific surface area (from 50 to 1315 m2/g, depending on the number of walls) for absorption of other nanomaterials and relatively good biocompatibility.

The archaeometric study of some samples from New gate Tower from Corvins’ Castle are analyzed in this paper in order to identify the raw materials nature and weathering / deterioration processes of these artifacts. Modern analytical techniques, as XRD, FTIR, Raman, SEM-EDS, colorimetry, porosimetry, thermal analysis are used to evaluate the structure and chemical composition (quartz, mica, dolomite, feldspar and plagioclase as albite and microcline minerals). Some minerals similar with apatites have been evidenced being responsible for the consolidated resistance structure inside of the towers.

This paper presents the reinforcement effect of bentonite (0 - 30%) on styrene-diene block-copolymers in correlation with the biphasic morphology of these thermoplastic elastomers.