Search

Well-dispersed gold nanoparticles (NP) coated with tiopronin were synthesized by X-ray irradiation without reducing agents. High-resolution transmission electron microscopy shows that the average core diameters of the NPs can be systematically controlled by adjusting the tiopronin to Au mole ratio in the reaction. Three methods were used to study the NP uptake by cells: quantitative measurements by inductively coupled plasma mass spectrometry, direct imaging with high lateral resolution transmission electron microscopy and transmission X-ray microscopy. The results confirmed that the NP internalization mostly occurred via endocytosis and concerned the cytoplasm. The particles, in spite of their small sizes, were not found to arrive inside the cell nuclei. The synthesis without reducing agents and solvents increased the biocompatibility as required for potential applications in analysis and biomedicine in general.

We describe a simple and effective method to obtain colloidal surface-functionalized Au nanoparticles. The method is primarily based on irradiation of a gold solution with high-flux X-rays from a synchrotron source in the presence of 11-mercaptoundecanoic acid (MUA). Extensive tests of the products demonstrated high colloidal density as well as excellent stability, shelf life, and biocompatibility. Specific tests with X-ray diffraction, UV-visible spectrometry, visible microscopy, Fourier transform infrared spectroscopy, dark-field visible-light scattering microscopy, and transmission electron microscopy demonstrated that MUA, being an effective surfactant, not only allows tunable size control of the nanoparticles, but also facilitates functionalization. The nanoparticle sizes were 6.45 +/- 1.58, 1.83 +/- 1.21, 1.52 +/- 0.37 and 1.18 +/- 0.26 nm with no MUA and with MUA-to-Au ratios of 1:2, 1:1, and 3:1. The MUA additionally enabled functionalization with L-glycine. We thus demonstrated flexibility in controlling the nanoparticle size over a large range with narrow size distribution.

Monodisperse gold nanorods with high aspect ratio were synthesized by x-ray irradiation. Irradiation was first used to stimulate the creation of seeds. Afterward, nanorod growth was stimulated either by chemical reduction or again by x-ray irradiation. In the last case, the entire process took place without reducing agents. The shape of the final products could be controlled by modulating the intensity of the x-ray irradiation during the seed synthesis. In turn, the nanorod aspect ratio determines the absorption wavelength of the nanorods that can thus be optimized for different applications. Likewise, the aspect ratio influences the uptake of the nanorods by HeLa cells.

An original synthesis method based on X-ray irradiation produced gold nanoparticles (AuNPs) with two important properties for biomedical research: intense visible photoluminescence and very high accumulation in cancer cells. The nanoparticles, coated with MUA (11-mercaptoundecanoid acid), are very small (1.4 nm diameter); the above two properties are not present for even slightly larger sizes. The small MUA-AuNPs are non-cytotoxic (except for very high concentrations) and do not interfere with cancer cell proliferation. Multimodality imaging using visible light fluorescence and X-ray microscopy is demonstrated by tracing the nanoparticle-loaded tumor cells. (C) 2012 Elsevier Inc. All rights reserved.

We synthesized AuPt alloyed nanoparticles in colloidal solution by a one-pot procedure based on synchrotron x-ray irradiation in the presence of PEG (polyethylene glycol). The exclusive presence of alloyed nanoparticles with fcc structure was confirmed by several different experiments including UV-vis spectroscopy, x-ray diffraction (XRD) and transmission electron microscopy (TEM). The composition of the AuPt alloyed nanoparticles can be varied in a continuous fashion by simply varying the feed ratios of Au and Pt precursors. The nanoparticles exhibited colloidal stability and biocompatibility, important for potential applications.

We show that by using different x-ray irradiation times of BSA-coated Au nanoparticles (NPs) we can change their ultraviolet-stimulated photoluminescence and shift the spectral weight over the visible spectral range. This is due to the interplay of two emission bands, one due to BSA and the other related to gold. The emission properties did not change with time over a period of several months. (C) 2014 Published by Elsevier B.V.

We report the analysis of a reducing-agent-free synthetic method based on intense X-ray irradiation in the presence of 11-mercaptoundecanoic acid (MUA) and their application in biomedical imaging. The method is very effective in controlling the size and size distribution of Au nanoparticles in colloidal solutions: gold nanoparticles (AuNPs) as small as similar to 1.2 +/- 0.25 nm are synthesized in a one-pot irradiation procedure without reducing agents. We found two coexisting properties of these small AuNPs: a strong visible fluorescence and very high accumulation in cells, which enabled a new type of multimodality imaging using X-ray and visible light microscopies. These properties come as a direct consequence of the precise size control; specifically, they exist only when the particle size is smaller than similar to 1.4 nm. We found that this process critically depends on several parameters including the solution pH, the solution temperature and the irradiation time. Most important is the fact that the increase of the irradiation time is not necessarily beneficial, since an optimum value exists to obtain small particles with a narrow size distribution. The 1.4 nm AuNPs are not toxic and significantly accumulate in tumor tissues in animal tests, as confirmed by X-ray imaging and fluorescence microscopy. This biodistribution could open the way for the use of these nanoparticles in X-ray imaging.

Surface thiolation was recently found to affect two important properties of gold nanoparticles: their size and the presence of visible luminescence under UV stimulation. We explored these phenomena by systematically analysing alkanethiolate coatings with different carbon chain lengths, from 3-mercaptopropionic acid to 16-mercaptohexadecanoic acid. In all cases, the coating was achieved by rapid reduction of metal ions stimulated by intense x-ray irradiation. For small surfactant-to-metal ratios in the solution, the nanoparticle size monotonically decreases with the length. Photoluminescence is present for the smallest nanoparticles, but its intensity becomes more intense as the carbon chain length increases. With 16-mercaptohexadecanoic acid coating, the nanoparticles achieved a 28% quantum efficiency which make them very bright fluorophores with a large Stokes shift, both strongly desired performances for biomedical imaging. These particles also yield strong luminescence with multiphoton excitation which could find imaging application with standard experimental setups. Besides their fundamental interest in clarifying the mechanism for luminescence, these results could find interesting practical applications in nanoparticle production and in the use of fluorescence for imaging in biology and other areas.

We demonstrate that the combination of x-ray irradiation and capping by polyethylene glycol (PEG) produces excellent flexibility in controlling the structure of Au-Pd nanoparticles while preserving their catalytic performance. We specifically adopted two different fabrication methods: co-reduction and seed-assisted reduction. In both cases, precursor composition plays an important role in controlling the phases and size of the bimetallic nanoparticles. The optimal catalytic performance is obtained with the highest Pd concentration and when the nanoparticles consist of a Au core and a Pd shell.

The catalytic properties of Pd trigger a strong interest on the related catalysis by Au-Pd nanoparticles. However, the analysis of such phenomena was complicated so far by the presence of capping. Using x-ray irradiation, we could produce uncapped Au-Pd nanoparticles and study their catalytic features, finding in particular their relation to the Pd content. Furthermore, the fabrication process is per se interesting, yielding excellent and flexibly controllable nanoparticles with a rather simple procedure.

We describe a simple and effective method to obtain colloidal surface-functionalized Au nanoparticles. The method is primarily based on irradiation of a gold solution with high-flux X-rays from a synchrotron source in the presence of 11-mercaptoundecanoic acid (MUA). Extensive tests of the products demonstrated high colloidal density as well as excellent stability, shelf life, and biocompatibility. Specific tests with X-ray diffraction, UV-visible spectrometry, visible microscopy, Fourier transform infrared spectroscopy, dark-field visible-light scattering microscopy, and transmission electron microscopy demonstrated that MUA, being an effective surfactant, not only allows tunable size control of the nanoparticles, but also facilitates functionalization. The nanoparticle sizes were 6.45 ± 1.58, 1.83 ± 1.21, 1.52 ± 0.37 and 1.18 ± 0.26 nm with no MUA and with MUA-to-Au ratios of 1:2, 1:1, and 3:1. The MUA additionally enabled functionalization with l-glycine. We thus demonstrated flexibility in controlling the nanoparticle size over a large range with narrow size distribution. Refereed/Peer-reviewed

Well-dispersed gold nanoparticles (NP) coated with tiopronin were synthesized by X-ray irradiation without reducing agents. High-resolution transmission electron microscopy shows that the average core diameters of the NPs can be systematically controlled by adjusting the tiopronin to Au mole ratio in the reaction. Three methods were used to study the NP uptake by cells: quantitative measurements by inductively coupled plasma mass spectrometry, direct imaging with high lateral resolution transmission electron microscopy and transmission X-ray microscopy. The results confirmed that the NP internalization mostly occurred via endocytosis and concerned the cytoplasm. The particles, in spite of their small sizes, were not found to arrive inside the cell nuclei. The synthesis without reducing agents and solvents increased the biocompatibility as required for potential applications in analysis and biomedicine in general Refereed/Peer-reviewed

We synthesized AuPt alloyed nanoparticles in colloidal solution by a one-pot procedure based on synchrotron x-ray irradiation in the presence of PEG (polyethylene glycol). The exclusive presence of alloyed nanoparticles with fcc structure was confirmed by several different experiments including UV–vis spectroscopy, x-ray diffraction (XRD) and transmission electron microscopy (TEM). The composition of the AuPt alloyed nanoparticles can be varied in a continuous fashion by simply varying the feed ratios of Au and Pt precursors. The nanoparticles exhibited colloidal stability and biocompatibility, important for potential applications. Refereed/Peer-reviewed

Monodisperse gold nanorods with high aspect ratio were synthesized by x-ray irradiation. Irradiation was first used to stimulate the creation of seeds. Afterward, nanorod growth was stimulated either by chemical reduction or again by x-ray irradiation. In the last case, the entire process took place without reducing agents. The shape of the final products could be controlled by modulating the intensity of the x-ray irradiation during the seed synthesis. In turn, the nanorod aspect ratio determines the absorption wavelength of the nanorods that can thus be optimized for different applications. Likewise, the aspect ratio influences the uptake of the nanorods by HeLa cells. Refereed/Peer-reviewed