Search

Success of 3D tissue substitutes in clinical applications depends on the presence of vascular networks in their structure. Accordingly, research in tissue engineering is focused on the stimulation of angiogenesis or generation of a vascular network in the scaffolds prior to implantation. A novel, xeno-free, collagen/hyaluronic acid-based poly(L-lactide-co-epsilon-caprolactone) (PLC/COL/HA) (20/9.5/0.5 w/w/w) microfibrous scaffold was produced by electrospinning. Collagen types I and III, and hyaluronic acid were isolated from human umbilical cords and blended with the GMP grade PLC. When compared with PLC scaffolds the PLC/COL/HA had higher water uptake capacity (103% vs 66%) which may have contributed to the decrease in its Young's Modulus (from 1.31 to 0.89 MPa). The PLC/COL/HA better supported adipose tissue-derived mesenchymal stem cell (AT MSC) adhesion; within 24 h the cell number on the PLC/COL/HA scaffolds was 3 fold higher. Co-culture of human umbilical vein endothelial cells and AT MSCs induced capillary formation on both scaffold types, but the PLC/COL/HA led to formation of interconnected vessels whose total length was 1.6 fold of the total vessel length on PLC. Clinical use of this scaffold would eliminate the immune response triggered by xenogeneic collagen and transmission of animal-borne diseases while promoting a better vascular network formation. Scientific and Technological Research Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [111T368] This study was supported by The Scientific and Technological Research Council of Turkey (TUBITAK) (grant number 111T368). We thank Prof. Murat Kasap and Abula Ayimugu from Proteomics Lab at Kocaeli University Experimental and Clinical Research Center for their help in characterizing the collagen by SDS-PAGE gel electrophoresis. We thank the members of Plastics and Rubber Technology Research Lab at Kocaeli University Chemical Engineering Department for their help in FTIR analysis of the scaffolds and their components.

Öz bulunamadı.

The aim of this research was to investigate the osteogenic differentiation potential of non-invasively obtained human stem cells on collagen nanocomposite scaffolds with in situ-grown calcium phosphate crystals. The foams had 70\% porosity and pore sizes varying in the range 50-200 mu m. The elastic modulus and compressive strength of the calcium phosphate containing collagen scaffolds were determined to be 234.5 kPa and 127.1 kPa, respectively, prior to in vitro studies. Mesenchymal stem cells (MSCs) obtained from Wharton's jelly and menstrual blood were seeded on the collagen scaffolds and proliferation and osteogenic differentiation capacities of these cells from two different sources were compared. The cells on the composite scaffold showed the highest alkaline phosphatase activity compared to the controls, cells on tissue culture polystyrene and cells on collagen scaffolds without in situ-formed calcium phosphate. MSCs isolated from both Wharton's jelly and menstrual blood showed a significant level of osteogenic activity, but those from Wharton's jelly performed better. In this study it was shown that collagen nanocomposite scaffolds seeded with cells obtained non-invasively from human tissues could represent a potential construct to be used in bone tissue engineering. Copyright (C) 2012 John Wiley \& Sons, Ltd.

The heart does not regenerate new functional tissue when myocardium dies following coronary artery occlusion, or if it is defective. Ventricular restoration involves excising the infarct and replacing it with a cardiac patch to restore the heart to a more healthy condition. The goal of this study was to design and develop a clinically applicable myocardial patch to replace myocardial infarcts and improve long-term heart function. A basic design composed of 3D microfibrous mats that house mesenchymal stem cells (MSCs) was developed from human umbilical cord matrix (Wharton's Jelly) cells aligned in parallel to each other mimicking the native myocardium. Poly(3-hydroxybutyrate- co-3-hydroxyvalerate) (PHBV), poly(L-D,L-lactic acid) (P(L-D,L)LA) and poly(glycerol sebacate) (PGS) were blended and electrospun into aligned fiber mats with fiber diameter ranging between 1.10 and 1.25 µm. The micron-sized parallel fibers of the polymer blend were effective in cell alignment and cells have penetrated deep within the mat through the fiber interstices, occupying the whole structure; 8-9 cell layers were obtained. Biodegradable macroporous tubings were introduced to serve as nutrient delivery route. It was possible to create a thick myocardial patch with structure similar to the native tissue and with a capability to grow. © 2009 Springer Science+Business Media, LLC. Sixth Framework Programme 105T508, METU-BAP 0108 DPT 2006K 120920-20 Acknowledgments This study was supported by TUBITAK TBAG 105T508, METU-BAP 0108 DPT 2006K 120920-20 and EU FP6 Network of Excellence project EXPERTISSUES.