Search

A wide range of bioactive materials have been investigated for tissue engineering and regeneration. Barium titanate is a promising smart material to be used as scaffold for bone tissue engineering. Barium titanate coatings are prepared in the present study using chemical bath deposition technique. Coatings are prepared at room temperature with the variation in solution molarity from 0.1 to 1.2 M. Perovskite tetragonal phase is observed after annealing the samples at 300 °C using 1.0-1.2 M solutions. Normal-anomalous dielectric response is observed for annealed coatings. Maximum transmission of ∼55% and ∼82% is observed under as-prepared and annealed coatings, respectivly. Variation in direct band gap, i.e. 3.45-3.64 eV, is observed with varying molarity. High hardness of the coatings (∼1180 HV) is observed at 1.2M with fracture toughness of ∼22 MPam

Composites play important role in dental filling by controlling shrinkage along with correction in teeth's shape and position. Rehabilitation of severely worn dentition can be achieved using mechanically strong composites. This study aims to synthesize zirconia-based composites to be used as dental fillers. Effect of microwave powers (100–900 W) along with Fe3O4 doping are studied on the structural, mechanical and magnetic properties of stabilized zirconia. SEM and TEM reveal formation of spherical nanoparticles with diameter of ∼30 nm. XRD results shows phase pure tetragonal zirconia (t-ZrO2) at microwave power of 500 W without any post heat treatment. Crystallite size calculated from XRD data (∼23 nm) matches well with the previously reported value for stabilization of t-ZrO2. Microwave energy dissipation results in stresses causing volume shrinkage leading to monoclinic to tetragonal phase transformation with higher X-ray density and hardness of ∼1347HV. VSM results show ferromagnetic response with low coercivity (600Oe) value and saturation magnetization (∼2emu/g). It is worth mentioning here that this is one of its kind study reporting synthesis of room temperature stabilized Fe3O4 doped zirconia composites at microwave power of 500 W. Antibacterial studies reveal inhibition zone of ∼32 mm against bacillus bacteria suggesting their potential use as dental filler.

In vivo biodistribution of radio labeled ZrOFeZirconia (ZrOResults signify that Fe

Use of ceramic coatings has increased dramatically in orthopedics by improving their wear resistance and consequent long-term stability. Such stability involves not only the strength of material but also its resistance toward bacterial attacks. Amongst all ceramics, zirconia is selected in the present study due to its white color and high value of hardness making it a potential candidate to be used as implants and their coatings. In the present study effect of varying microwave powers (i.e. 100W, 200W, 300W, 400W, 500W, 600W, 700W, 800W, 900W and 1000W) on sol–gel synthesized glucose and fructose added zirconia coatings has been investigated. Formation of mixed tetragonal – monoclinic phases has been observed at relatively low microwave powers, i.e. 100–500W. However, at 600–1000W phase pure tetragonal zirconia is observed without any post heat treatment. FTIR analysis confirms formation of tetragonal phase of zirconia at 600–1000W microwave power. XPS results confirm the binding energies of Zr 3d and O 1s of microwave assisted zirconia coatings. High value of transmittance, i.e. ~90%, is observed at higher microwave powers. Variation in microwave powers is observed to tune the energy band gap of zirconia coatings in the range of 4.2–5.1 eV. Dielectric constant of 8–10 at log f = 4 is observed. High value of hardness and fracture toughness i.e. 1231 HV and 24.85 MPam−1/2, respectively, is observed for stabilized tetragonal zirconia coatings. Stabilized glucose fructose added zirconia shows strong antioxidant activity. Zirconia coatings are tested against Staphylococcus aureus bacteria for their potential application to treat bone infection. Results suggest that stabilized tetragonal zirconia can be successfully employed for orthopedic coatings.

Aims In vivo biodistribution of radio labeled ZrO2 nanoparticles is addressed for better imaging, therapy and diagnosis. Nanoparticles are synthesized by microwave assisted sol-gel technique using Fe3O4 as a stabilizer. Antioxidant assay, hemolytic activity in human blood and biodistribution in rabbits was explored to study the therapeutical as well as in vivo targeted diagnostic applications of as synthesized nanoparticles. Main methods Fe3O4 stabilized zirconia nanoparticles are synthesized using microwave assisted sol-gel method. Microwave (MW) powers are varied in the range of 100 to 1000 W. As synthesized nanoparticles are evaluated using different characterizations such as X-ray diffractometer, scanning electron microscope, Raman spectroscopy, impedance analyzer, Vickers micro hardness indenter, FTIR, and UV–Vis spectroscopy. In vitro activity of synthesized nanoparticles is checked in freshly extracted human blood serum. To study biodistribution of Fe3O4 stabilized zirconia nanoparticles in rabbit, technetium-99 m was used for labeling purpose. The labeling efficacy and stability of labeled nanoparticles are also measured with instant thin layer chromatography (ITLC) method. Intravenous injection of 99mTc-Fe3O4 stabilized zirconia nanoparticles (0.2 ml), containing 110 MBq of radioactivity, is performed to study the biodistribution; nanoparticles are injected into the ear vein of animal (rabbit). Key findings Zirconia (ZrO2) nanoparticles (NPs) are stabilized using Fe3O4 that were prepared by means of microwave assisted sol-gel method. Crystallite size (~20 nm) agrees well with the values required to stabilize tetragonal zirconia (t-ZrO2). Volume shrinkage results in high value of hardness (~1369). Dielectric constant values, compatible for biomedical application, are observed for tetragonally stabilized samples. Low value of hemolytic response is observed for Fe3O4 stabilized ZrO2 NPs. 99mTc radio labeled ZrO2 NPs proved to be potential candidate to study biodistribution. Biodistribution studies show stability of radiolabeled NPs in the original suspension as well as in blood serum. CT scan of rabbit is performed for several times to check the biodistribution of NPs with time and survival of rabbit. Results suggest that these NPs can also be used as targeted nanoparticles as well as variants of drug payload carrier. Significance Results signify that Fe3O4 stabilized ZrO2 nanoparticles synthesized by microwave assisted sol-gel method may be considered as “all-rounder” nanoplatform and are safe enough to be used in diagnostic as well as therapeutic purposes.

Demand of bioactive materials that may create a bacteria-free environment while healing and regenerating the defect area is increasing day by day. Zirconia is a very interesting material because of its biocompatibility and high fracture toughness. In this research work, zirconia nanoparticles (NPs) have been synthesized using sol-gel method. Molarity of sols is varied in the range of 25 to 125 mM. The effect of acidic and basic nature of sols is studied by maintaining acidic (2) and basic (9) pH. As-synthesized NPs are made soluble in deionized (DI) water using tangerine drops. Dissolved NPs are spin coated onto glass substrate prior to characterization. Pure tetragonal phase, observed under all conditions using basic medium (pH 9), is accompanied by smaller crystallite size and unit cell volume. Presence of stabilized zirconia phase leads to higher value of density and higher mechanical strength. Nanodendrites with distinct features are observed for the sample prepared with high molarity using basic medium. Whereas, soft agglomerated nanodendrites are observed using acidic medium. Optical properties show transmission of 60–80% in the visible and infrared regions for acidic based samples and ~84% for basic samples. Direct energy band gap is varied from 4.96 eV to 5.1 eV in acidic (pH 2) and 4.91 eV to 4.97 eV in basic (pH 9) media. FTIR spectra show the formation of fundamental tetragonal band at 490 cm−1 for basic samples. Antibacterial response of zirconia is tested against E. coli, Streptococcus and Bacillus bacteria. Human teeth, bare and zirconia coated, are tested for their possible weight loss after dipping in various beverages. Zirconia coated tooth shows negligible degradation in hardness and weight after 24 hr dipping period. Thus, coatings prepared using water soluble zirconia (WSZ) nanoparticles, without the use of toxic solvents/reagents, are promising material to be used as protective coatings in biomedical applications.