Search

International audience; Semipermeable polymeric anion exchange membranes are essential for separation, filtration and energy conversion technologies including reverse electrodialysis systems that produce energy from salinity gradients, fuel cells to generate electrical power from the electrochemical reaction between hydrogen and oxygen, and water electrolyser systems that provide H$_2$ fuel. Anion exchange membrane fuel cells and anion exchange membrane water electrolysers rely on the membrane to transport OH$^−$ ions between the cathode and anode in a process that involves cooperative interactions with H$_2$O molecules and polymer dynamics. Understanding and controlling the interactions between the relaxation and diffusional processes pose a main scientific and critical membrane design challenge. Here quasi-elastic neutron scattering is applied over a wide range of timescales (10$^0$–10$^3$ ps) to disentangle the water, polymer relaxation and OH$^−$ diffusional dynamics in commercially available anion exchange membranes (Fumatech FAD-55) designed for selective anion transport across different technology platforms, using the concept of serial decoupling of relaxation and diffusional processes to analyse the data. Preliminary data are also reported for a laboratory-prepared anion exchange membrane especially designed for fuel cell applications.

While polyamide (PA) membranes are widespread in water purification and desalination by reverse osmosis, a molecular-level understanding of the dynamics of both confined water and polymer matrix remains elusive. Despite the dense hierarchical structure of PA membranes formed by interfacial polymerization, previous studies suggest that water diffusion remains largely unchanged with respect to bulk water. Here, we employ neutron spectroscopy to investigate PA membranes under precise hydration conditions, and a series of isotopic contrasts, to elucidate water transport and polymer relaxation, spanning ps-ns timescales, and Å-nm lengthscales. We experimentally resolve, for the first time, the multimodal diffusive nature of water in PA membranes: in addition to (slowed down) translational jump-diffusion, we observe a long-range and a localized mode, whose geometry and timescales we quantify. The PA matrix is also found to exhibit rotational relaxations commensurate with the nanoscale confinement observed in water diffusion. This comprehensive ‘diffusion map’ can anchor molecular and nanoscale simulations, and enable the predictive design of PA membranes with tuneable performance.

This study reports a general method to calculate dihedral angles (φ and ψ) of a given amino acid sequence, focusing on potential energy and torque moment concepts. By defining these physical measures in relation to the chemical interactions that occur on each single amino acid residue within a peptide, we analyze the folding process as the result of main mechanical forces (MMFs) exerted in the specific amino acid chain of interest. As a proof of concept, Leu-enkephalin was initially used as a model peptide to carry out the theoretical study. Our data show agreement between calculated Leu-enkephalin backbone dihedral angles and the corresponding experimentally determined X-ray values. Hence, we used calcitonin to validate our MMF-based method on a larger peptide, i.e., 32 amino acid residues forming an α-helix. Through a similar approach (although simplified with regard to electrostatic interactions), the calculations for calcitonin also demonstrate a good agreement with experimental values. This study offers new opportunities to analyze peptides' amino acid sequences and to help in the prediction of how they must fold, assisting in the development of new computational techniques in the field.

Proton exchange membranes (PEMs) that conduct protons between electrodes, whilst minimizing the transport of reactant molecules are vital components of energy storage and conversion devices, such as fuel cells (FC), electrolysers and redox flow batteries. Despite over half a century of synthetic development, perfluorosulfonic acid membranes, such as Nafion, remain the industry standard. Performance improvements have thus relied on use of additives to improve water retention and proton conductivity. However, understanding the way in which these additives arrange favourably into the phase separated morphology of the polymer structure and positively influence water uptake and proton conductivity has eluded researchers. Polytriazine imide structured graphitic carbon nitride (PTI) with a graphitic structure of repeating C12N12H3 structural voids is an ideal candidate additive due to its specific size, functional groups, and hydrophilicity.[1] Using neutron scattering we directly revealed the importance of triazine and bridging N-H groups for facilitated water transport through the intralayer voids and speculate their importance in hydrated proton transport.[2] Herein, ultrasonic spray printing (USP) was used to incorporate PTI nanosheets into the phase separated morphology of Nafion. Fabrication was optimised via PTI wt.% loading and USP fabrication parameters to obtain a high-performance PEM with proton conductivity higher than commercial Nafion at low and high hydration. USP allowed an increased proportion of PTI to be added over conventional solution casting method without deleterious effect of restacking and agglomeration. Neutron reflectivity (NR) and quasi-elastic neutron scattering were used to probe the structure and dynamics of polymer framework, water and ions. Comparison with pure Nafion and other composite materials provided insight into the way in which graphitic additives arrange inside the polymer aggregates and enhance water transport. This work highlights PTI as an effective 2D material for structural tuning of phase separated polymers for contiguous proton and water transport within the semi-crystalline framework, as well as highlighting an experimental approach to reveal nanoscale structure-property relationships. [1] T. M. Suter, T. S. Miller, J. K. Cockcroft, A. E. Aliev, M. C. Wilding, A. Sella, F. Corà, C. A. Howard, P. F. McMillan, Chem. Sci., 2019, 10, 2519-2528 [2] F. Foglia, A. J. Clancy, J. Berry-Gair, K. Lisowska, M. C. Wilding, T. M. Suter, T. S. Miller, K. Smith, F. Demmel, M. Appel, V. G. Sakai, C. A. Howard, M. Tyagi, F. Coràand, and P. F. McMillan, Sci. Adv., 2020, 6, eabb6011

Ion conducting polymer membranes are designed for applications ranging from separation and dialysis, to energy conversion and storage technologies. A key application is in fuel cells, where the semi-permeable polymer membrane plays several roles. In a fuel cell, electrical power is generated from the electrochemical reaction between oxygen and hydrogen, catalysed by metal nanoparticles at the cathode and anode sites. The polymer membrane permits the selective transport of H+ or OH− to enable completion of the electrode half-reactions, plays a major role in the management of water that is necessary for the conduction process and is a product in the reactions, and provides a physical barrier against leakage across the cell. All of these functions must be optimised to enable high conduction efficiency under operational conditions, including high temperatures and aggressive chemical environments, while ensuring a long lifetime of the fuel cell. Polymer electrolyte membranes used in current devices only partially meet these stringent requirements, with ongoing research to assess and develop improved membranes for a more efficient operation and to help realise the transition to a hydrogen-fuelled energy economy. A key fundamental issue to achieving these goals is the need to understand and control the nature of the strongly coupled dynamical processes involving the polymer, water and ions, and their relationship to the conductivity, as a function of temperature and other environmental conditions. This can be achieved by using techniques that give access to information across a wide range of timescales. Given the complexity of the dynamical map in these systems, unravelling and disentangling the various processes involved can be accessed by applying the “serial decoupling” approach introduced by Angell and co-workers for ion-conducting glasses and polymers. Here we introduce this concept and propose how it can be applied to proton- and anion-conducting fuel cell membranes using two main classes of these materials as examples.

Fuel cells that generate electrical power by the direct electrochemical conversion of fuel to electricity are expected to become important sustainable energy sources for transportation and stationary applications. Polymer electrolyte membrane fuel cell (PEMFC) systems operating with oxygen and hydrogen or bio-derived fuels require an ion exchange membrane to transport H+ or OH- ions between the anode and cathode. Proton conduction in Nafion membranes is well studied. However these PEMFC systems rely on noble metal electrocatalysts due to the corrosive nature of the acidic electrolyte. An alkaline electrolyte allows non-noble catalysts to be used at the cathode, leading to reduced cost and enhanced sustainability. Understanding OH- transport and how it influences water management and polymer dynamics in anion exchange membranes (AEMs) is a critical design challenge and design parameter. Here, neutron scattering is used to disentangle the water, polymer relaxation and OH- diffusion dynamics in a commercial AEM system

Understanding the structure of the stratum corneum (SC) is essential to understand the skin barrier process. The long periodicity phase (LPP) is a unique trilayer lamellar structure located in the SC. Adjustments in the composition of the lipid matrix, as in many skin abnormalities, can have severe effects on the lipid organization and barrier function. Although the location of individual lipid subclasses has been identified, the lipid conformation at these locations remains uncertain. Contrast variation experiments via small-angle neutron diffraction were used to investigate the conformation of ceramide (CER) N-(tetracosanoyl)-sphingosine (NS) within both simplistic and porcine mimicking LPP models. To identify the lipid conformation of the twin chain CER NS, the chains were individually deuterated, and their scattering length profiles were calculated to identify their locations in the LPP unit cell. In the repeating trilayer unit of the LPP, the acyl chain of CER NS was located in the central and outer layers, while the sphingosine chain was located exclusively in the middle of the outer layers. Thus, for the CER NS with the acyl chain in the central layer, this demonstrates an extended conformation. Electron density distribution profiles identified that the lipid structure remains consistent regardless of the lipid's lateral packing phase, this may be partially due to the anchoring of the extended CER NS. The presented results provide a more detailed insight on the internal arrangement of the LPP lipids and how they are expected to be arranged in healthy skin.

Self-assembled, lipid-based micelles, such as those formed by the short-chain phosphocholine, dihexanoylphosphatidylcholine (2C6PC), are degraded by the pancreatic enzyme, phospholipase A2 (PLA2). Degradation yields 1-hexanoyl-lysophosphocholine (C6LYSO) and hexanoic acid (C6FA) products. However, little is known about the behavior of these products during and after the degradation of 2C6PC. In this work, a combination of static and time-resolved small angle neutron scattering, as well as all-atom molecular dynamics simulations, is used to characterize the structure of 2C6PC micelles. In doing so a detailed understanding of the substrateand product aggregation behavior before, during and after degradationis gained. Consequently, the formation of mixed micelles containing 2C6PC, C6LYSO and C6FA is shown at every stage of the degradation process, as well as the formation of mixed C6LYSO/C6FA micelles after degradation is complete. The use of atomistic molecular dynamics has allowed us to characterize the structure of 2C6PC, 2C6PC/C6LYSO/C6FA, and C6LYSO/C6FA micelles throughout the degradation process, showing the localization of the different molecular species within the aggregates. In addition, the hydration of the 2C6PC, C6LYSO, and C6FA species both during micellization and as monomers in aqueous solution is documented to reveal the processes driving their micellization.

Creams are multi-component semi-solid emulsions that find widespread utility across a wide range of pharmaceutical, cosmetic, and personal care products, and they also feature prominently in veterinary preparations and processed foodstuffs. The internal architectures of these systems, however, have to date been inferred largely through macroscopic and/or indirect experimental observations and so they are not well-characterized at the molecular level. Moreover, while their long-term stability and shelf-life, and their aesthetics and functional utility are critically dependent upon their molecular structure, there is no real understanding yet of the structural mechanisms that underlie the potential destabilizing effects of additives like drugs, anti-oxidants or preservatives, and no structure-based rationale to guide product formulation. In the research reported here we sought to address these deficiencies, making particular use of small-angle neutron scattering and exploiting the device of H/D contrast variation, with complementary studies also performed using bright-field and polarised light microscopy, small-angle and wide-angle X-ray scattering, and steady-state shear rheology measurements. Through the convolved findings from these studies we have secured a finely detailed picture of the molecular structure of creams based on Aqueous Cream BP, and our findings reveal that the structure is quite different from the generic picture of cream structure that is widely accepted and reproduced in textbooks.

We demonstrate nanoscale wrinkling on polydimethylsiloxane (PDMS) at sub-100 nm length scales via a (double) frontal surface oxidation coupled with a mechanical compression. The kinetics of the glassy skin propagation is resolved by neutron and X-ray reflectivity, and atomic force microscopy, combined with mechanical wrinkling experiments to evaluate the resulting pattern formation. In conventional PDMS surface oxidation, the smallest wrinkling patterns attainable have an intrinsic lower wavelength limit due to the coupling of skin formation and front propagation at fixed strain εprestrain, whose maximum is, in turn, set by material failure. However, combining two different oxidative processes, ultra-violet ozonolysis followed by air plasma exposure, we break this limit by fabricating trilayer laminates with excellent interfacial properties and a sequence of moduli and layer thicknesses able to trivially reduce the surface topography to sub-100 nm dimensions. This method provides a powerful, yet simple, non-lithographic approach to extend surface patterning from visible to the deep UV range.

Recent years have seen very significant progress made in the application of X-ray and neutron diffraction and reflectivity in structural studies of lipid and lipid–protein membranes. Improvements in instrumentation and the development of new sample preparation techniques and specialized sample environments have afforded data that provide a greater resolution of structural detail, and in many cases on systems that have a complexity of composition and architecture that closely mimic those of true biological membranes. This review provides an overview of the various methodologies involved in membrane reflectivity and diffraction experiments, with a primary focus on aspects of sample preparation and data analysis. We then provide a review of some of the research performed in this area over the period 2010–2015, offering a critical comparison of reflectivity vs. diffraction experiments.

The possibility that life can exist within previously unconsidered habitats is causing us to expand our understanding of potential planetary biospheres. Significant populations of living organisms have been identified at depths extending up to several km below the Earth's surface; whereas laboratory experiments have shown that microbial species can survive following exposure to GigaPascal (GPa) pressures. Understanding the degree to which simple organisms such as microbes survive such extreme pressurization under static compression conditions is being actively investigated. The survival of bacteria under dynamic shock compression is also of interest. Such studies are being partly driven to test the hypothesis of potential transport of biological organisms between planetary systems. Shock compression is also of interest for the potential modification and sterilization of foodstuffs and agricultural products. Here we report the survival of Shewanella oneidensis bacteria exposed to dynamic (shock) compression. The samples examined included: (a) a “wild type” (WT) strain and (b) a “pressure adapted” (PA) population obtained by culturing survivors from static compression experiments to 750 MPa. Following exposure to peak shock pressures of 1.5 and 2.5 GPa the proportion of survivors was established as the number of colony forming units (CFU) present after recovery to ambient conditions. The data were compared with previous results in which the same bacterial samples were exposed to static pressurization to the same pressures, for 15 minutes each. The results indicate that shock compression leads to survival of a significantly greater proportion of both WT and PA organisms. The significantly shorter duration of the pressure pulse during the shock experiments (2–3 µs) likely contributes to the increased survival of the microbial species. One reason for this can involve the crossover from deformable to rigid solid-like mechanical relaxational behavior that occurs for bacterial cell walls on the order of seconds in the time-dependent strain rate.

The solution structure of the phosphocholine (PC) head group in 1,2-dipropionyl-sn-glycero-3-phosphocholine (C(3)-PC) in 30 mol. % dimethylsulfoxide (DMSO)-water solutions has been determined by using neutron diffraction enhanced with isotopic substitution in combination with computer simulation techniques. By investigating the atomic scale hydration structure around the PC head group, a unique description of the displacement of water molecules by DMSO molecules is detailed around various locations of the head group. Specifically, DMSO molecules were found to be the most prevalent around the onium portion of the head group, with the dipoles of the DMSO molecules being aligned where the negatively charged oxygen can interact strongly with the positively charged lipid group. The phosphate group is also partially dehydrated by the presence of the DMSO molecules. However, around this group the bulkier positive end of the DMSO dipole is interacting with negatively charged groups of the lipid head group, the DMSO layer shows no obvious ordering as it cannot form hydrogen bonds with the oxygen atoms in the PO(4) group such as water molecules can. Interestingly, DMSO-water contacts have also increased in the presence of the lipid molecule relative to DMSO-water contacts observed in pure DMSO/water solutions at similar concentrations.

Langmuir isotherm, neutron reflectivity, and small angle neutron scattering studies have been conducted to characterize the monolayers and vesicular bilayers formed by a novel chimeric phospholipid, ChemPPC, that incorporates a cholesteryl moeity and a C-16 aliphatic chain, each covalently linked via a glycerol backbone to phosphatidylcholine. The structures of the ChemPPC monolayers and bilayers are compared against those formed from pure dipalmitoylphoshatidylcholine (DPPC) and those formed from a 60:40 mol % mixture of DPPC and cholesterol. In accord with previous findings showing that very similar macroscopic properties were exhibited by ChemPPC and 60:40 mol % DPPC/cholesterol vesicles, it is found here that the chimeric lipid and lipid/sterol mixture have very similar monolayer structures (each having a monolayer thickness of ∼26 Å), and they also form vesicles with similar lamellar structure, each having a bilayer thickness of ∼50 Å and exhibiting a repeat spacing of ∼65 Å. The interfacial area of ChemPPC, however, is around 10 Å(2) greater than that of the combined DPPC/cholesterol unit in the mixed lipid monolayer (viz., 57 ± 1 vs 46 ± 1 Å(2), at 35 mN·m(-1)), and this difference in area is attributed to the succinyl linkage which joins the ChemPPC steroid and glyceryl moieties. The larger area of the ChemPPC is reflected in a slightly thicker monolayer solvent distribution width (9.5 vs 9 Å for the DPPC/cholesterol system) and by a marginal increase in the level of lipid headgroup hydration (16 vs 13 H(2)O per lipid, at 35 mN·m(-1)).

The thermal stability of bovine pancreatic ribonuclease (RNase A) has been investigated in the presence of trimethylamine N-oxide (TMAO), a naturally occurring osmolyte, by means of differential scanning calorimetry (DSC) and circular dichroism (CD) measurements at neutral and acid pH conditions. It is well known that compatible osmolytes such as TMAO are effective in stabilizing protein structure and counteracting the denaturing the effect of urea and guanidinium hydrochloride (GuHCl). Calorimetric results show that TMAO stabilizes RNase A at pH 7.0 and does not stabilize the protein at pH 4.0. RNase A thermal denaturation in the presence of TMAO is a reversible two-state N ⇆ D process. We also show that TMAO counteracts the urea and GuHCl denaturing effect at neutral pH, whereas the counteracting ability is lost at acid pH.

Corrigendum: The dynamics of methylammonium ions in hybrid organic–inorganic perovskite solar cells

Langmuir surface pressure, small-angle neutron scattering (SANS), and neutron reflectivity (NR) studies have been performed to determine how formulation of the antifungal drug amphotericin B (AmB), with sodium cholesteryl sulfate (SCS)-as in Amphotec-affects its interactions with ergosterol-containing (model fungal cell) and cholesterol-containing (model mammalian cell) membranes. The effects of mixing AmB in 1:1 molar ratio with cholesteryl sulfate (yielding AmB-SCS micelles) are compared against those of free AmB, using monolayers and bilayers formed from palmitoyloleoylphosphatidylcholine (POPC) in the absence and presence of 30 mol % ergosterol or cholesterol, in all cases employing a 1:0.05 molar ratio of lipid:AmB. Analyses of the (bilayer) SANS and (monolayer) NR data indicate that the equilibrium changes in membrane structure induced in sterol-free and sterol-containing membranes are the same for free AmB and AmB-SCS. Stopped-flow SANS experiments, however, reveal that the structural changes to vesicle membranes occur far more rapidly following exposure to AmB-SCS vs free drug, with the kinetics of these changes varying with membrane composition. With POPC vesicles, the structural changes induced by AmB-SCS become apparent only after several minutes, and equilibrium is reached after ∼30 min. The corresponding onset of changes in POPC-ergosterol and POPC-cholesterol vesicles, however, occurs within ∼5 s, with equilibrium reached after 10 and 120 s, respectively. The rate of insertion of AmB into POPC-sterol membranes is thus increased through formulation as AmB-SCS. Moreover, the differences in monolayer surface pressure and SANS structure-change equilibration times suggest significant rearrangement of AmB within these membranes following insertion. The reduced times to equilibrium for the POPC-ergosterol vs POPC-cholesterol systems are consistent with the known differences in affinity of AmB for these two sterols, and the reduced time to equilibrium for AmB-SCS interaction with POPC-ergosterol membranes vs that for free AmB is consistent with the reduced host toxicity of Amphotec.

Langmuir isotherm, neutron reflectivity, and Brewster angle microscopy experiments have been performed to study the interaction of amphotericin B (AmB) with monolayers prepared from 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) and mixtures of this lipid with cholesterol or ergosterol to mimic mammalian and fungal cell membranes, respectively. Isotherm data show that AmB causes a more pronounced change in surface pressure in the POPC/ergosterol system than in the POPC and POPC/cholesterol systems, and its interaction with the POPC/ergosterol monolayer is also more rapid than with the POPC and POPC/cholesterol monolayers. Brewster angle microscopy shows that, in interaction with POPC monolayers, AmB causes the formation of small domains which shrink and disappear within a few minutes. The drug also causes domain formation in the POPC/cholesterol and POPC/ergosterol monolayers; in the former case, these are formed more slowly than is seen with the POPC monolayers and are ultimately much smaller; in the latter case, they are formed rather more quickly and are more heterogeneous in size. Neutron reflectivity data show that the changes in monolayer structure following interaction with AmB are the same for all three systems studied: the data are consistent with the drug inserting into the monolayers with its macrocyclic ring intercalated among the lipid acyl chains and sterol ring systems, with its mycosamine moiety colocalizing with the sterol hydroxyl and POPC head groups. On the basis of these studies, it is concluded that AmB inserts in a similar manner into POPC, POPC/cholesterol, and POPC/ergosterol monolayers but does so with differing kinetics and with the formation of quite different in-plane structures. The more rapid time scale for interaction of the drug with the POPC/ergosterol monolayer, its more pronounced effect on monolayer surface pressure, and its more marked changes as regards domain formation are all consistent with the drug's selectivity for fungal vs mammalian cell membranes.

X-ray and neutron scattering techniques are applied to a very wide range of condensed matter systems and problems ranging from solid state materials to biological organisms in order to study and understand their structures and phase transformations under static and dynamic compression, as well as their synthesis and function under extreme conditions. Here we illustrate the applications of several of these techniques to problems of current scientific and technological interest.

The hydration of the phosphocholine headgroup in 1,2-dipropionyl-sn-glycero-3-phosphocholine (C(3)-PC) in solution has been determined by using neutron diffraction enhanced with isotopic substitution in combination with computer simulation techniques. The atomic scale hydration structure around this head group shows that both the -N(CH(3))(3) and -CH(2) portions of the choline headgroup are strongly associated with water, through a unique hydrogen bonding regime, where specifically a hydrogen bond from the C-H group to water and a strong association between the water oxygen and N(+) atom in solution have both been observed. In addition, both PO(4) oxygens (P=O) and C=O oxygens are oversaturated when compared to bulk water in that the average number of hydrogen bonds from water to both X=O oxygens is about 2.5 for each group. That water binds strongly to the glycerol groups and is suggestive that water may bind to these groups when phosophotidylcholine is embedded in a membrane bilayer.

Methylammonium lead iodide perovskite can make high-efficiency solar cells, which also show an unexplained photocurrent hysteresis dependent on the device-poling history. Here we report quasielastic neutron scattering measurements showing that dipolar CH3NH3+ ions reorientate between the faces, corners or edges of the pseudo-cubic lattice cages in CH3NH3PbI3 crystals with a room temperature residence time of ∼14 ps. Free rotation, π-flips and ionic diffusion are ruled out within a 1–200-ps time window. Monte Carlo simulations of interacting CH3NH3+ dipoles realigning within a 3D lattice suggest that the scattering measurements may be explained by the stabilization of CH3NH3+ in either antiferroelectric or ferroelectric domains. Collective realignment of CH3NH3+ to screen a device's built-in potential could reduce photovoltaic performance. However, we estimate the timescale for a domain wall to traverse a typical device to be ∼0.1–1 ms, faster than most observed hysteresis., Hysteresis often exists in the characterization of methylammonium lead halide-based solar cells, but is not well understood. Here, the authors use quasielastic neutron scattering to study the dynamics of dipolar organic cations and shed light on the hysteresis behaviour.