Search

In this work, we investigated a new approach to incorporate Mg particles within a PDLLA matrix using a solvent-free commercially available process. PDLLA/Mg composites were manufactured by injection moulding and the effects of Mg incorporated into PDLLA on MSC and macrophage responses were evaluated. Small amounts of Mg particles (≤ 1 wt %) do not cause thermal degradation of PDLLA, which retains its mechanical properties. PDLLA/Mg composites release hydrogen, alkaline products and Mg(2+) ions without changing pH of culture media. Mg-containing materials provide a noncytotoxic environment that enhances MSC viability. Concentration of Mg(2+) ions in extracts of MSCs increases with the increment of Mg content in the composites. Incorporation of Mg particles into PDLLA stimulates FN production, ALP activity, and VEGF secretion in MSCs, an effect mediated by degradation products dissolved from the composites. Degradation products of PDLLA induce an increase in MCP-1, RANTES, and MIP-1α secretion in macrophages while products of composites have minimal effect on these chemokines. Regulation of MSC behavior at the biomaterial's interface and macrophage-mediated inflammatory response to the degradation products is related to the incorporation of Mg in the composites. These findings suggest that including small amounts of Mg particles into polymeric devices can be a valuable strategy to promote osseointegration and reduce host inflammatory response.

Mesenchymal stem cells (MSC) modulate the macrophage-mediated inflammatory response through the secretion of soluble factors. In addition to its classical effects on calcium homeostasis, 1,25-dihydroxyvitamin D3 (1,25D3) has emerged as an important regulator of the immune system. The present study investigates whether 1,25D3 modulates the paracrine interactions between MSC and macrophages. 1,25D3 stimulated MSC to produce PGE2 and VEGF and regulated the interplay between macrophages and MSC toward reduced pro-inflammatory cytokine production. Conditioned media (CM) from co-cultures of macrophages and MSC impaired MSC osteogenesis. However, MSC cultured in CM from 1,25D3-treated co-cultures showed increased matrix maturation and mineralization. Co-culturing MSC with macrophages prevented the 1,25D3-induced increase in RANKL levels, which correlated with up-regulation of OPG secretion. MSC seeding in three-dimensional (3D) substrates potentiated their immunomodulatory effects on macrophages. Exposure of 3D co-cultures to 1,25D3 further reduced the levels of soluble factors related to inflammation and chemotaxis. As a consequence of 1,25D3 treatment, the recruitment of monocytes toward CM of 3D co-cultures decreased, while the osteogenic maturation of MSC increased. These data add new insights into the pleiotropic effects of 1,25D3 on the crosstalk between MSC and macrophages and highlight the role of the hormone in bone regeneration.

The interactions between bone tissue and orthopedic implants are strongly affected by mechanical forces at the bone-implant interface, but the interplay between surface topographies, mechanical stimuli, and cell behavior is complex and not well understood yet. This study reports on the influence of mechanical stretch on human mesenchymal stem cells (hMSCs) attached to metallic substrates with different roughness. Controlled forces were applied to plasma membrane of hMSCs cultured on smooth and rough stainless steel surfaces using magnetic collagen-coated particles and an electromagnet system. Degree of phosphorylation of focal adhesion kinase (p-FAK) on the active form (Tyr-397), prostaglandin E2 (PGE2) and vascular endothelial growth factor (VEGF) levels increased on rough samples under static conditions. Cell viability and fibronectin production decreased on rough substrates, while hMSCs maturated to the osteoblastic lineage to a similar extent on both surfaces. PGE2 production and osteoprotegerin/receptor activator of nuclear factor kappa-B ligand ratio increased after force application on both surfaces, although to a greater extent on smooth substrates. p-FAK on Tyr-397 was induced fairly rapidly by mechanical stimulation on rough surfaces while cells cultured on smooth samples failed to activate this kinase in response to tensile forces. Mechanical forces enhanced VEGF secretion and reduced cell viability, fibronetin levels and osteoblastic maturation on smooth surfaces but not on rough samples. The magnetite beads model used in this study is well suited to characterize the response of hMSCs cultured on metallic surfaces to tensile forces and collected data suggest a mechanism whereby mechanotransduction driven by FAK is essential for stem cell growth and functioning on metallic substrates.

Biphasic calcium phosphates (BCPs) consist of a mixture of hydroxyapatite and β-tricalcium phosphate and are recommended as alternatives or additives to autogenous bone for orthopaedic and dental applications. There is clinical evidence showing particle release from bioceramics, which might impair the ability of human mesenchymal stem cells (hMSC) from bone marrow to proliferate or mature into a functional osteoblast phenotype. This study analyses the influence of BCP particles and their precursors, calcium-deficient apatite (CDA) particles, on in vitro hMSC behaviour. Both types of particles were efficiently internalized by hMSC. Cell viability, morphology and actin cytoskeleton reorganization were unaffected by exposure of hMSC to BCP or CDA particles. Direct exposure to BCP particles impaired hMSC osteogenic differentiation and bone matrix mineralization to a lesser extent than CDA, as assayed by evaluation of alkaline phosphatase activity, osteopontin secretion and mineralized nodule formation. The ability of bioceramic particles to affect osteogenic maturation through modification of soluble factors in media was assayed in an in vitro system that avoids direct cell–particle contact. Indirect exposure to CDA particles severely impaired hMSC osteogenic maturation owing to the uptake of Ca2+ from the culture media. Lower textural properties of BCP and the lack of calcium deficiency in its composition prevented Ca2+ uptake, allowing the development of a functional osteoblast phenotype.

We developed biodegradable polymeric coatings loaded with increasing amounts of dexamethasone on composites based on polylactic acid and Mg particles for bone repair. Incorporation of Mg particles into the polymeric matrix improves the compressive behaviour of the polymer. Mg-containing composites release Mg ions into the culture medium and improve mesenchymal stem cell (MSC) viability, enhance their osteogenic potential and promote the release of angiogenic factors. Dexamethasone-loaded coatings deposited on composites delay Mg ion dissolution while releasing controlled amounts of the drug, which are highly dependent on initial payload. Release kinetic of dexamethasone from the coatings exhibits a fast initial release of the drug followed by a slower secondary release. Bioactivity of the released dexamethasone was explored by monitoring dose-dependent responses of MSCs and macrophages. Biological effects exerted by the released drug are similar to those observed in cells treated with solutions of the glucocorticoid, indicating that the method employed for inclusion of dexamethasone into the coatings does not impair its bioactive behaviour. Culturing MSCs on dexamethasone-releasing coatings enhances extracellular matrix production and initial induction to osteogenic commitment as a function of drug payload. Dexamethasone incorporated into the coatings presents anti-inflammatory activity, as shown by the decrease in the production of cytokines and angiogenic factors by macrophages and MSCs. Deposition of dexamethasone-releasing coatings on polymer/Mg composites appears to be a promising approach to delay composite degradation at the early stage of implantation and may be useful to attenuate inflammation and adverse foreign body reactions.

In this work, we investigated a new approach to incorporate Mg particles within a PDLLA matrix using a solvent-free commercially available process. PDLLA/Mg composites were manufactured by injection moulding and the effects of Mg incorporated into PDLLA on MSC and macrophage responses were evaluated. Small amounts of Mg particles (≤ 1 wt %) do not cause thermal degradation of PDLLA, which retains its mechanical properties. PDLLA/Mg composites release hydrogen, alkaline products and Mg(2+) ions without changing pH of culture media. Mg-containing materials provide a noncytotoxic environment that enhances MSC viability. Concentration of Mg(2+) ions in extracts of MSCs increases with the increment of Mg content in the composites. Incorporation of Mg particles into PDLLA stimulates FN production, ALP activity, and VEGF secretion in MSCs, an effect mediated by degradation products dissolved from the composites. Degradation products of PDLLA induce an increase in MCP-1, RANTES, and MIP-1α secretion in macrophages while products of composites have minimal effect on these chemokines. Regulation of MSC behavior at the biomaterial's interface and macrophage-mediated inflammatory response to the degradation products is related to the incorporation of Mg in the composites. These findings suggest that including small amounts of Mg particles into polymeric devices can be a valuable strategy to promote osseointegration and reduce host inflammatory response.

The interactions between bone tissue and orthopedic implants are strongly affected by mechanical forces at the bone-implant interface, but the interplay between surface topographies, mechanical stimuli, and cell behavior is complex and not well understood yet. This study reports on the influence of mechanical stretch on human mesenchymal stem cells (hMSCs) attached to metallic substrates with different roughness. Controlled forces were applied to plasma membrane of hMSCs cultured on smooth and rough stainless steel surfaces using magnetic collagen-coated particles and an electromagnet system. Degree of phosphorylation of focal adhesion kinase (p-FAK) on the active form (Tyr-397), prostaglandin E2 (PGE2) and vascular endothelial growth factor (VEGF) levels increased on rough samples under static conditions. Cell viability and fibronectin production decreased on rough substrates, while hMSCs maturated to the osteoblastic lineage to a similar extent on both surfaces. PGE2 production and osteoprotegerin/receptor activator of nuclear factor kappa-B ligand ratio increased after force application on both surfaces, although to a greater extent on smooth substrates. p-FAK on Tyr-397 was induced fairly rapidly by mechanical stimulation on rough surfaces while cells cultured on smooth samples failed to activate this kinase in response to tensile forces. Mechanical forces enhanced VEGF secretion and reduced cell viability, fibronetin levels and osteoblastic maturation on smooth surfaces but not on rough samples. The magnetite beads model used in this study is well suited to characterize the response of hMSCs cultured on metallic surfaces to tensile forces and collected data suggest a mechanism whereby mechanotransduction driven by FAK is essential for stem cell growth and functioning on metallic substrates.

Osteosarcoma-derived cells have been routinely used for studying osteoblastic functions, but it remains unclear to what extent they mimic the behavior of primary osteoblasts in the study of cells and materials interactions. This study reports comparatively on the responses of three human osteosarcoma cell lines, MG-63, Saos-2 and U-2 OS, and human primary osteoblasts cultured on Ti6Al4V surfaces or exposed to Ti particles. Phenotypic characterization of the cell lines revealed that Saos-2 cells and primary osteoblasts displayed similar expression patterns of Cbfa1, SP7 and osteocalcin. Unlike primary cells, the cell lines expressed markers of undifferentiated cells, had high proliferative rates and poor fibronectin matrix assembly. None of the three cell lines faithfully reproduced the adhesive behavior of primary osteoblasts when cultured on Ti6Al4V surfaces or exposed to Ti particles. Differences in cell growth between the cell lines and primary osteoblasts cultured on Ti6Al4V surfaces were also observed. Ti particles inhibited the growth of Saos-2 cells and primary osteoblasts to a similar extent, while no such effect was observed in U-2 OS and MG-63 cells. Saos-2 cells reproduced the alkaline phosphatase (ALP) activity profile of primary osteoblasts cultured on metallic surfaces or exposed to particles. Altogether, these results show that none of the osteoblast-like cells studied perfectly mimic the behavior of human osteoblast cells (hOB) on Ti6Al4V surfaces or exposed to Ti particles. Saos-2 cells reproduce some of the hOB responses such as the profile of enzymatic ALP activity when cultured on the surfaces or treated with particles as well as cell growth inhibition when exposed to Ti particles. Although in vitro cytocompatibility studies involve the evaluation of multiple parameters, Saos-2 cells may be used as representative of human osteoblasts when these standard tests are evaluated.