Search

Micrometer-scale monodisperse droplets are produced to generate nanowalled supramolecular microcapsules using microfluidics for high reproducibility and high-throughput manipulation, efficient material consumption, and control over hierarchical structure, shape, and size. In this study, an optimized microfluidic droplet generation technique and a unique liquid–liquid interfacial polymerization method were applied to fabricate the monodisperse polyrotaxane–based supramolecular microcapsules in a fast and simple way. To minimize the uncertainty due to droplet volume variation, the inlet pressures were supplied from the same source while lowering the interfacial tension and the main channel hydrodynamic resistance, which are critical for high monodispersity. The target polyrotaxane network (PN) was simply formed at the interface of the water and oil phases in ultra-monodisperse microdroplets via the cucurbit[6]uril (CB6)-catalyzed azide–alkyne cycloaddition (CB6-AAC) reaction between azido- and alkyne-functionalized tetraphenylporphyrin monomers (TPP-4AZ and TPP-4AL). The thickness of the interfacially assembled PN microcapsules was 20 nm as analyzed by cross-sectional TEM and TEM-EDX techniques. The resultant water-in-oil PN microcapsules were highly monodisperse in size and able to retain target molecules. Here, rhodamine 6G (Rh6G)-loaded PN microcapsules were fabricated, and the release rate of the Rh6G cargo was investigated over time for controlled drug release applications.

WOS: 000365167700026, In this paper, we present a very simple method to fabricate three-dimensional (3D) microelectrodes integrated with microfluidic devices. We form the electrodes by etching a microwire placed across a microchannel. For precise control of the electrode spacing, we employ a hydrodynamic focusing microfluidic device and control the width of the etching solution stream. The focused widths of the etchant solution and the etching time determine the gap formed between the electrodes. Using the same microfluidic device, we can fabricate integrated 3D electrodes with different electrode gaps. We have demonstrated the functionality of these electrodes using an impedimetric particle counting setup. Using 3D microelectrodes with a diameter of 25 mu m, we have detected 6 mu m-diameter polystyrene beads in a buffer solution as well as erythrocytes in a PBS solution. We study the effect of electrode spacing on the signal-to-noise ratio of the impedance signal and we demonstrate that the smaller the electrode spacing the higher the signal obtained from a single microparticle. The sample stream is introduced to the system using the same hydrodynamic focusing device, which ensures the alignment of the sample in between the electrodes. Utilising a 3D hydrodynamic focusing approach, we force all the particles to go through the sensing region of the electrodes. This fabrication scheme not only provides a very low-cost and easy method for rapid prototyping, but which can also be used for applications requiring 3D electric field focused through a narrow section of the microchannel., Scientific and Technological Research Council of Turkey (TUBITAK) [112M944]; European Union [322019], This project was supported by The Scientific and Technological Research Council of Turkey (TUBITAK project no. 112M944) and European Union FP7 Marie Curie Career Integration Grant (no. 322019). The authors also thank Dr Aykutlu Dana, Dr Gokhan Bakan and Amir Ghobadi for their help in the measurement setup and their comments on the manuscript.