Search

Renewed interests in the development of bioenergy, biochemicals, and biomaterials have elicited new strategies for engineering the lignin of biomass feedstock plants. This study shows, for the first time, that 3,4-dihydroxybenzoate (DHB) is compatible with the radical coupling reactions that assemble polymeric lignin in plants. We introduced a bacterial 3-dehydroshikimate dehydratase into hybrid poplar (Populus alba × grandidentata) to divert carbon flux away from the shikimate pathway, which lies upstream of lignin biosynthesis. Transgenic poplar wood had up to 33% less lignin with p-hydroxyphenyl units comprising as much as 10% of the lignin. Mild alkaline hydrolysis of transgenic wood released fewer ester-linked p-hydroxybenzoate groups than control trees, and revealed the novel incorporation of cell-wall-bound DHB, as well as glycosides of 3,4-dihydroxybenzoic acid (DHBA). Two-dimensional nuclear magnetic resonance (2D-NMR) analysis uncovered DHBA-derived benzodioxane structures suggesting that DHB moieties were integrated into the lignin polymer backbone. In addition, up to 40% more glucose was released from transgenic wood following ionic liquid pretreatment and enzymatic hydrolysis. This work highlights the potential of diverting carbon flux from the shikimate pathway for lignin engineering and describes a new type of 'zip-lignin' derived from the incorporation of DHB into poplar lignin.

Lignin is the primary contributor to the high cost of biofuel-production from lignocellulosic biomass. In order to study lignin removal and the release of aromatic monomers, we applied hydrocracking and ionic liquid pretreatments on Arabidopsis thaliana biomass from both wild type (WT) and a mutant (CAD cxd) defective in two cinnamyl alcohol dehydrogenase genes involved in the lignin biosynthetic pathway. For Arabidopsis WT, our results highlight that pretreatments reduce average molecular weight of lignin by about 65% and decrease the content of β-O-4 linkages between lignin monomers. For Arabidopsis CAD mutant, an opposite effect is evidenced. Fewer differences were observed on depolymerization and molecular structure of lignin, which indicates that (8-O-4), (8-5), and (8-8) linkages observed in CAD mutant make lignin more resilient to pretreatment than wild-type lignin. Finally, our study shows the potential of hydrocracking pretreatment technology for extracting valuable aldehyde monomers such as vanillin and syringaldehyde from biomass.

Agricultural biotechnology strategies often require the precise regulation of multiple genes to effectively modify complex plant traits. However, most efforts are hindered by a lack of characterized tools that allow for reliable and targeted expression of transgenes. We have successfully engineered a library of synthetic transcriptional regulators that modulate expression strength in planta. By leveraging orthogonal regulatory systems from Saccharomyces spp., we have developed a strategy for the design of synthetic activators, synthetic repressors, and synthetic promoters and have validated their use in Nicotiana benthamiana and Arabidopsis thaliana. This characterization of contributing genetic elements that dictate gene expression represents a foundation for the rational design of refined synthetic regulators. Our findings demonstrate that these tools provide variation in transcriptional output while enabling the concerted expression of multiple genes in a tissue-specific and environmentally responsive manner, providing a basis for generating complex genetic circuits that process endogenous and environmental stimuli.

Glycosylinositolphosphorylceramides (GIPCs) are the predominant lipid in the outer leaflet of the plasma membrane. Characterized GIPC glycosylation mutants have severe or lethal plant phenotypes. However, the function of the glycosylation is unclear. Previously, we characterized Arabidopsis thaliana GONST1 and showed that it was a nucleotide sugar transporter which provides GDP‐mannose for GIPC glycosylation. gonst1 has a severe growth phenotype, as well as a constitutive defense response. Here, we characterize a mutant in GONST1’s closest homolog, GONST2. The gonst2‐1 allele has a minor change to GIPC headgroup glycosylation. Like other reported GIPC glycosylation mutants, gonst1‐1gonst2‐1 has reduced cellulose, a cell wall polymer that is synthesized at the plasma membrane. The gonst2‐1 allele has increased resistance to a biotrophic pathogen Golovinomyces orontii but not the necrotrophic pathogen Botrytis cinerea. Expression of GONST2 under the GONST1 promoter can rescue the gonst1 phenotype, indicating that GONST2 has a similar function to GONST1 in providing GDP‐D‐Man for GIPC mannosylation.

Background Lignin deposited in plant cell walls negatively affects biomass conversion into advanced bioproducts. There is therefore a strong interest in developing bioenergy crops with reduced lignin content or altered lignin structures. Another desired trait for bioenergy crops is the ability to accumulate novel bioproducts, which would enhance the development of economically sustainable biorefineries. As previously demonstrated in the model plant Arabidopsis, expression of a 3-dehydroshikimate dehydratase in plants offers the potential for decreasing lignin content and overproducing a value-added metabolic coproduct (i.e., protocatechuate) suitable for biological upgrading. Results The 3-dehydroshikimate dehydratase QsuB from Corynebacterium glutamicum was expressed in the bioenergy crop switchgrass (Panicum virgatum L.) using the stem-specific promoter of an O-methyltransferase gene (pShOMT) from sugarcane. The activity of pShOMT was validated in switchgrass after observation in-situ of beta-glucuronidase (GUS) activity in stem nodes of plants carrying a pShOMT::GUS fusion construct. Under controlled growth conditions, engineered switchgrass lines containing a pShOMT::QsuB construct showed reductions of lignin content, improvements of biomass saccharification efficiency, and accumulated higher amount of protocatechuate compared to control plants. Attempts to generate transgenic switchgrass lines carrying the QsuB gene under the control of the constitutive promoter pZmUbi-1 were unsuccessful, suggesting possible toxicity issues associated with ectopic QsuB expression during the plant regeneration process. Conclusion This study validates the transfer of the QsuB engineering approach from a model plant to switchgrass. We have demonstrated altered expression of two important traits: lignin content and accumulation of a co-product. We found that the choice of promoter to drive QsuB expression should be carefully considered when deploying this strategy to other bioenergy crops. Field-testing of engineered QsuB switchgrass are in progress to assess the performance of the introduced traits and agronomic performances of the transgenic plants.

Background Switchgrass (Panicum virgatum L.) is a promising bioenergy feedstock because it can be grown on marginal land and produces abundant biomass. Recalcitrance of the lignocellulosic components of the switchgrass cell wall to enzymatic degradation into simple sugars impedes efficient biofuel production. We previously demonstrated that overexpression of OsAT10, a BAHD acyltransferase gene, enhances saccharification efficiency in rice. Results Here we show that overexpression of the rice OsAT10 gene in switchgrass decreased the levels of cell wall-bound ferulic acid (FA) in green leaf tissues and to a lesser extent in senesced tissues, and significantly increased levels of cell wall-bound p-coumaric acid (p-CA) in green leaves but decreased its level in senesced tissues of the T0 plants under greenhouse conditions. The engineered switchgrass lines exhibit an approximate 40% increase in saccharification efficiency in green tissues and a 30% increase in senesced tissues. Conclusion Our study demonstrates that overexpression of OsAT10, a rice BAHD acyltransferase gene, enhances saccharification of lignocellulosic biomass in switchgrass. Electronic supplementary material The online version of this article (10.1186/s12896-018-0464-8) contains supplementary material, which is available to authorized users.

Reduced cell wall recalcitrance and increased C6 monosaccharide content are desirable traits for future biofuel crops, as long as these biomass modifications do not significantly alter normal growth and development. Mixed-linkage glucan (MLG), a cell wall polysaccharide only present in grasses and related species among flowering plants, is comprised of glucose monomers linked by both β-1,3 and β-1,4 bonds. Previous data have shown that constitutive production of MLG in barley (Hordeum vulgare) severely compromises growth and development. Here, we used spatio-temporal strategies to engineer Arabidopsis thaliana plants to accumulate significant amounts of MLG in the cell wall by expressing the rice CslF6 MLG synthase using secondary cell wall and senescence-associated promoters. Results using secondary wall promoters were suboptimal. When the rice MLG synthase was expressed under the control of a senescence-associated promoter, we obtained up to four times more glucose in the matrix cell wall fraction and up to a 42% increase in saccharification compared to control lines. Importantly, these plants grew and developed normally. The induction of MLG deposition at senescence correlated with an increase of gluconic acid in cell wall extracts of transgenic plants in contrast to the other approaches presented in this study. MLG produced in Arabidopsis has an altered structure compared to the grass glucan, which likely affects its solubility, while its molecular size is unaffected. The induction of cell wall polysaccharide biosynthesis in senescing tissues offers a novel engineering alternative to enhance cell wall properties of lignocellulosic biofuel crops.

Summary Lignin confers recalcitrance to plant biomass used as feedstocks in agro‐processing industries or as source of renewable sugars for the production of bioproducts. The metabolic steps for the synthesis of lignin building blocks belong to the shikimate and phenylpropanoid pathways. Genetic engineering efforts to reduce lignin content typically employ gene knockout or gene silencing techniques to constitutively repress one of these metabolic pathways. Recently, new strategies have emerged offering better spatiotemporal control of lignin deposition, including the expression of enzymes that interfere with the normal process for cell wall lignification. In this study, we report that expression of a 3‐dehydroshikimate dehydratase (QsuB from Corynebacterium glutamicum) reduces lignin deposition in Arabidopsis cell walls. QsuB was targeted to the plastids to convert 3‐dehydroshikimate – an intermediate of the shikimate pathway – into protocatechuate. Compared to wild‐type plants, lines expressing QsuB contain higher amounts of protocatechuate, p‐coumarate, p‐coumaraldehyde and p‐coumaryl alcohol, and lower amounts of coniferaldehyde, coniferyl alcohol, sinapaldehyde and sinapyl alcohol. 2D‐NMR spectroscopy and pyrolysis‐gas chromatography/mass spectrometry (pyro‐GC/MS) reveal an increase of p‐hydroxyphenyl units and a reduction of guaiacyl units in the lignin of QsuB lines. Size‐exclusion chromatography indicates a lower degree of lignin polymerization in the transgenic lines. Therefore, our data show that the expression of QsuB primarily affects the lignin biosynthetic pathway. Finally, biomass from these lines exhibits more than a twofold improvement in saccharification efficiency. We conclude that the expression of QsuB in plants, in combination with specific promoters, is a promising gain‐of‐function strategy for spatiotemporal reduction of lignin in plant biomass.

International audience; Muconic acid (MA) is a dicarboxylic acid used for the production of industrially relevant chemicals such as adipic acid, terephthalic acid, and caprolactam. Because the synthesis of these polymer precursors generates toxic intermediates by utilizing petroleum-derived chemicals and corrosive catalysts, the development of alternative strategies for the bio-based production of MA has garnered significant interest. Plants produce organic carbon skeletons by harvesting carbon dioxide and energy from the sun, and therefore represent advantageous hosts for engineered metabolic pathways towards the manufacturing of chemicals. In this work, we engineered Arabidopsis to demonstrate that plants can serve as green factories for the bio-manufacturing of MA. In particular, dual expression of plastid-targeted bacterial salicylate hydroxylase (NahG) and catechol 1,2-dioxygenase (CatA) resulted in the conversion of the endogenous salicylic acid (SA) pool into MA via catechol. Sequential increase of SA derived from the shikimate pathway was achieved by expressing plastid-targeted versions of bacterial salicylate synthase (Irp9) and feedback-resistant 3-deoxy-D-arabino-heptulosonate synthase (AroG). Introducing this SA over-producing strategy into engineered plants that co-express NahG and CatA resulted in a 50-fold increase in MA titers. Considering that MA was easily recovered from senesced plant biomass after harvest, we envision the phytoproduction of MA as a beneficial option to add value to bioenergy crops.

Naturally, many aerobic organisms degrade lignin-derived aromatics through conserved intermediates including protocatechuate and catechol. Employing this microbial approach offers a potential solution for valorizing lignin into valuable chemicals for a potential lignocellulosic biorefinery and enabling bioeconomy. In this study, two hybrid biochemical routes combining lignin chemical depolymerization, plant metabolic engineering, and synthetic pathway reconstruction were demonstrated for valorizing lignin into value-added products. In the biochemical route 1, alkali lignin was chemically depolymerized into vanillin and syringate as major products, which were further bio-converted into cis, cis-muconic acid (ccMA) and pyrogallol, respectively, using engineered Escherichia coli strains. In the second biochemical route, the shikimate pathway of Tobacco plant was engineered to accumulate protocatechuate (PCA) as a soluble intermediate compound. The PCA extracted from the engineered Tobacco was further converted into ccMA using the engineered E. coli strain. This study reports a direct process for converting lignin into ccMA and pyrogallol as value-added chemicals, and more importantly demonstrates benign methods for valorization of polymeric lignin that is inherently heterogeneous and recalcitrant. Our approach also validates the promising combination of plant engineering with microbial chassis development for the production of value added and speciality chemicals.

© 2017, Public Library of Science, All rights reserved. This is an open access article, free of all copyright, and may be freely reproduced, distributed, transmitted, modified, built upon, or otherwise used by anyone for any lawful purpose. The work is made available under the Creative Commons CC0 public domain dedication. Lignin in plant biomass represents a target for engineering strategies towards the development of a sustainable bioeconomy. In addition to the conventional lignin monomers, namely p-coumaryl, coniferyl and sinapyl alcohols, tricin has been shown to be part of the native lignin polymer in certain monocot species. Because tricin is considered to initiate the polymerization of lignin chains, elucidating its biosynthesis and mechanism of export to the cell wall constitute novel challenges for the engineering of bioenergy crops. Late steps of tricin biosynthesis require two methylation reactions involving the pathway intermediate selgin. It has recently been demonstrated in rice and maize that caffeate O-methyltransferase (COMT) involved in the synthesis syringyl (S) lignin units derived from sinapyl alcohol also participates in the synthesis of tricin in planta. In this work, we validate in sorghum (Sorghum bicolor L.) that the O-methyltransferase responsible for the production of S lignin units (SbCOMT / Bmr12) is also involved in the synthesis of lignin-linked tricin. In particular, we show that biomass from the sorghum bmr12 mutant contains lower level of tricin incorporated into lignin, and that SbCOMT can methylate the tricin precursors luteolin and selgin. Our genetic and biochemical data point toward a general mechanism whereby COMT is involved in the synthesis of both tricin and S lignin units.

© 2017 American Chemical Society. Tight control and multifactorial regulation of gene expression are important challenges in genetic engineering and are critical for the development of regulatory circuits. Meeting these challenges will facilitate transgene expression regulation and support the fine-tuning of metabolic pathways to avoid the accumulation of undesired intermediates. By employing the endoribonuclease Csy4 and its recognition sequence from Pseudomonas aeruginosa and manipulating 5′UTR of mRNA, we developed a two-component expression-repression system to tightly control synthesis of transgene products. We demonstrated that this regulatory device was functional in monocotyledonous and dicotyledonous plant species, and showed that it can be used to repress transgene expression by >400-fold and to synchronize transgene repression. In addition to tissue-specific transgene repression, this system offers stimuli-dependent expression control. Using a bioinformatics approach, we identified 54 orthologous systems from various bacteria, and then validated in planta the activity for a few of those systems, demonstrating the potential diversity of such a two-component repressor system.

Ammonium acquisition by plant roots is mediated by AMMONIUM TRANSPORTERs (AMTs), ubiquitous membrane proteins with essential roles in nitrogen nutrition in all organisms. In microbial and plant cells, ammonium transport activity is controlled by ammonium-triggered feedback inhibition to prevent cellular ammonium toxicity. Data from heterologous expression in yeast indicate that oligomerization of plant AMTs is critical for allosteric regulation of transport activity, in which the conserved cytosolic C terminus functions as a trans-activator. Employing the coexpressed transporters AMT1;1 and AMT1;3 from Arabidopsis thaliana as a model, we show here that these two isoforms form functional homo- and heterotrimers in yeast and plant roots and that AMT1;3 carrying a phosphomimic residue in its C terminus regulates both homo- and heterotrimers in a dominant-negative fashion in vivo. 15NH4 + influx studies further indicate that allosteric inhibition represses ammonium transport activity in roots of transgenic Arabidopsis expressing a phosphomimic mutant together with functional AMT1;3 or AMT1;1. Our study demonstrates in planta a regulatory role in transport activity of heterooligomerization of transporter isoforms, which may enhance their versatility for signal exchange in response to environmental triggers.

Lignocellulosic biomass was used for thousands of years as animal feed and is now considered a great sugar source for biofuels production. It is composed mostly of secondary cell walls built with polysaccharide polymers that are embedded in lignin to reinforce the cell wall structure and maintain its integrity. Lignin is the primary material responsible for biomass recalcitrance to enzymatic hydrolysis. During plant development, deep reductions of lignin cause growth defects and often correlate with the loss of vessel integrity that adversely affects water and nutrient transport in plants. The work presented here describes a new approach to decrease lignin content while preventing vessel collapse and introduces a new strategy to boost transcription factor expression in native tissues. We used synthetic biology tools in Arabidopsis to rewire the secondary cell network by changing promoter-coding sequence associations. The result was a reduction in lignin and an increase in polysaccharide depositions in fibre cells. The promoter of a key lignin gene, C4H, was replaced by the vessel-specific promoter of transcription factor VND6. This rewired lignin biosynthesis specifically for vessel formation while disconnecting C4H expression from the fibre regulatory network. Secondly, the promoter of the IRX8 gene, secondary cell wall glycosyltransferase, was used to express a new copy of the fibre transcription factor NST1, and as the IRX8 promoter is induced by NST1, this also created an artificial positive feedback loop (APFL). The combination of strategies—lignin rewiring with APFL insertion—enhances polysaccharide deposition in stems without over-lignifying them, resulting in higher sugar yields after enzymatic hydrolysis.

Nucleoside triphosphate diphosphohydrolases (NTPDases; apyrases) (EC 3.6.1.5) hydrolyze di- and triphosphate nucleotides, but not monophosphate nucleotides. They are categorized as E-type ATPases, have a broad divalent cation (Mg(2+), Ca(2+)) requirement for activation and are insensitive to inhibitors of F-type, P-type and V-type ATPases. Among the seven NTPDases identified in Arabidopsis, only APYRASE 1 (AtAPY1) and APYRASE 2 (AtAPY2) have been previously characterized. In this work, either AtAPY1 or AtAPY2 tagged with C-terminal green fluorescent protein (GFP) driven by their respective native promoter can rescue the apy1 apy2 double knockout (apy1 apy2 dKO) successfully, and confocal microscopy reveals that these two Arabidopsis apyrases reside in the Golgi apparatus. In Saccharomyces cerevisiae, both AtAPY1 and AtAPY2 can complement the Golgi-localized GDA1 mutant, rescuing its aberrant protein glycosylation phenotype. In Arabidopsis, microsomes of the wild type show higher substrate preferences toward UDP compared with other NDP substrates. Loss-of-function Arabidopsis AtAPY1 mutants exhibit reduced microsomal UDPase activity, and this activity is even more significantly reduced in the loss-of-function AtAPY2 mutant and in the AtAPY1/AtAPY2 RNA interference (RNAi) technology repressor lines. Microsomes from wild-type plants also have detectable GDPase activity, which is significantly reduced in apy2 but not apy1 mutants. The GFP-tagged AtAPY1 or AtAPY2 constructs in the apy1 apy2 dKO plants can restore microsomal UDP/GDPase activity, confirming that they both also have functional competency. The cell walls of apy1, apy2 and the RNAi-silenced lines all have an increased composition of galactose, but the transport efficiency of UDP-galactose across microsomal membranes was not altered. Taken together, these results reveal that AtAPY1 and AtAPY2 are Golgi-localized nucleotide diphosphatases and are likely to have roles in regulating UDP/GDP concentrations in the Golgi lumen.

Lignocellulosic biomass is utilized as a renewable feedstock in various agro-industrial activities. Lignin is an aromatic, hydrophobic and mildly branched polymer integrally associated with polysaccharides within the biomass, which negatively affects their extraction and hydrolysis during industrial processing. Engineering the monomer composition of lignins offers an attractive option towards new lignins with reduced recalcitrance. The presented work describes a new strategy developed in Arabidopsis for the overproduction of rare lignin monomers to reduce lignin polymerization degree (DP). Biosynthesis of these 'DP reducers' is achieved by expressing a bacterial hydroxycinnamoyl-CoA hydratase-lyase (HCHL) in lignifying tissues of Arabidopsis inflorescence stems. HCHL cleaves the propanoid side-chain of hydroxycinnamoyl-CoA lignin precursors to produce the corresponding hydroxybenzaldehydes so that plant stems expressing HCHL accumulate in their cell wall higher amounts of hydroxybenzaldehyde and hydroxybenzoate derivatives. Engineered plants with intermediate HCHL activity levels show no reduction in total lignin, sugar content or biomass yield compared with wild-type plants. However, cell wall characterization of extract-free stems by thioacidolysis and by 2D-NMR revealed an increased amount of unusual C₆C₁ lignin monomers most likely linked with lignin as end-groups. Moreover the analysis of lignin isolated from these plants using size-exclusion chromatography revealed a reduced molecular weight. Furthermore, these engineered lines show saccharification improvement of pretreated stem cell walls. Therefore, we conclude that enhancing the biosynthesis and incorporation of C₆C₁ monomers ('DP reducers') into lignin polymers represents a promising strategy to reduce lignin DP and to decrease cell wall recalcitrance to enzymatic hydrolysis.

The plant Golgi plays a pivotal role in the biosynthesis of cell wall matrix polysaccharides, protein glycosylation, and vesicle trafficking. Golgi-localized proteins have become prospective targets for reengineering cell wall biosynthetic pathways for the efficient production of biofuels from plant cell walls. However, proteomic characterization of the Golgi has so far been limited, owing to the technical challenges inherent in Golgi purification. In this study, a combination of density centrifugation and surface charge separation techniques have allowed the reproducible isolation of Golgi membranes from Arabidopsis (Arabidopsis thaliana) at sufficiently high purity levels for in-depth proteomic analysis. Quantitative proteomic analysis, immunoblotting, enzyme activity assays, and electron microscopy all confirm high purity levels. A composition analysis indicated that approximately 19% of proteins were likely derived from contaminating compartments and ribosomes. The localization of 13 newly assigned proteins to the Golgi using transient fluorescent markers further validated the proteome. A collection of 371 proteins consistently identified in all replicates has been proposed to represent the Golgi proteome, marking an appreciable advancement in numbers of Golgi-localized proteins. A significant proportion of proteins likely involved in matrix polysaccharide biosynthesis were identified. The potential within this proteome for advances in understanding Golgi processes has been demonstrated by the identification and functional characterization of the first plant Golgi-resident nucleoside diphosphatase, using a yeast complementation assay. Overall, these data show key proteins involved in primary cell wall synthesis and include a mixture of well-characterized and unknown proteins whose biological roles and importance as targets for future research can now be realized.

AMMONIUM TRANSPORTER (AMT) proteins are conserved in all domains of life and mediate the transport of ammonium or ammonia across cell membranes. AMTs form trimers and use intermolecular interaction between subunits to regulate activity. So far, binding forces that stabilize AMT protein complexes are not well characterized. High temperature or reducing agents released mono- and dimeric forms from trimeric complexes formed by AMT1;1 from Arabidopsis and tomato. However, in the paralogue LeAMT1;3, trimeric complexes were not detected. LeAMT1;3 differs from the other AMTs by an unusually short N-terminus, suggesting a role for the N-terminus in oligomer stability. Truncation of the N-terminus in LeAMT1;1 destabilized the trimer and led to loss of functionality when expressed in yeast. Swapping of the N-terminus between LeAMT1;1 and LeAMT1;3 showed that sequences in the N-terminus of LeAMT1;1 are necessary and sufficient for stabilization of the interaction among the subunits. Two N-terminal cysteine residues are highly conserved among AMT1 transporters in plants but are lacking in LeAMT1;3. C3S or C27S variants of LeAMT1;1 showed reduced complex stability, which coincided with lower transport capacity for the substrate analogue methylammonium. Both cysteine-substituted LeAMT1;1 variants showed weaker interactions with the wildtype as determined by a quantitative analysis of the complex stability using the mating-based split-ubiquitin assay. These data indicate that the binding affinity of AMT1 subunits is stabilized by cysteines in the N-terminus and suggest a role for disulphide bridge formation via apoplastic N-terminal cysteine residues.

Renewable and sustainable liquid transportation biofuels based on lignocellulosics conversion face several obstacles that must be overcome in order for them to become commercially viable and cost-competitive. The presence of lignin is one of the most significant contributors to biomass recalcitrance and consequently increases the costs associated with conversion. Lignins are complex aromatic biopolymers, derived from hydroxyphenylpropanoids, that vary in composition and structure as a function of genotype, phenotype, and environment, as well as with the cell type and maturity of the plant tissue. Lignins consist of (mainly) syringyl (S), guaiacyl (G), and p-hydroxyphenyl (H) units, derived from sinapyl, coniferyl, and p-coumaryl alcohols. These units are not discrete within either the cell or a given lignin molecule, and the compositional ratios of these three moieties can vary significantly. This inherent complexity and heterogeneity of lignin, both in structure and composition, make it extremely difficult to develop a conversion technology that can efficiently process a wide range of sustainable feedstocks cost-effectively. There is a growing body of work that has demonstrated several genetic engineering strategies that, when coupled with an integrated approach to conversion, hold significant promise for the development of tailored feedstocks designed for biofuel production. The knowledgebase is at the point where researchers are also able to contemplate strategies to 'design' the lignin polymer for easier processing. The realization of advanced analytical techniques and an increasing number of plant genomes are enabling researchers to take a systems approach towards understanding and engineering lignin to develop these optimal feedstocks.

Homotypic and heterotypic protein interactions are crucial for all levels of cellular function, including architecture, regulation, metabolism, and signaling. Therefore, protein interaction maps represent essential components of post-genomic toolkits needed for understanding biological processes at a systems level. Over the past decade, a wide variety of methods have been developed to detect, analyze, and quantify protein interactions, including surface plasmon resonance spectroscopy, NMR, yeast two-hybrid screens, peptide tagging combined with mass spectrometry and fluorescence-based technologies. Fluorescence techniques range from co-localization of tags, which may be limited by the optical resolution of the microscope, to fluorescence resonance energy transfer-based methods that have molecular resolution and can also report on the dynamics and localization of the interactions within a cell. Proteins interact via highly evolved complementary surfaces with affinities that can vary over many orders of magnitude. Some of the techniques described in this review, such as surface plasmon resonance, provide detailed information on physical properties of these interactions, while others, such as two-hybrid techniques and mass spectrometry, are amenable to high-throughput analysis using robotics. In addition to providing an overview of these methods, this review emphasizes techniques that can be applied to determine interactions involving membrane proteins, including the split ubiquitin system and fluorescence-based technologies for characterizing hits obtained with high-throughput approaches. Mass spectrometry-based methods are covered by a review by Miernyk and Thelen (2008; this issue, pp. 597-609). In addition, we discuss the use of interaction data to construct interaction networks and as the basis for the exciting possibility of using to predict interaction surfaces.

The AMMONIUM TRANSPORTER (AMT) family comprises six isoforms in Arabidopsis thaliana. Here, we describe the complete functional organization of root-expressed AMTs for high-affinity ammonium uptake. High-affinity influx of 15N-labeled ammonium in two transposon-tagged amt1;2 lines was reduced by 18 to 26% compared with wild-type plants. Enrichment of the AMT1;2 protein in the plasma membrane and localization of AMT1;2 promoter activity in the endodermis and root cortex indicated that AMT1;2 mediates the uptake of ammonium entering the root via the apoplasmic transport route. An amt1;1 amt1;2 amt1;3 amt2;1 quadruple mutant (qko) showed severe growth depression under ammonium supply and maintained only 5 to 10% of wild-type high-affinity ammonium uptake capacity. Transcriptional upregulation of AMT1;5 in nitrogen-deficient rhizodermal and root hair cells and the ability of AMT1;5 to transport ammonium in yeast suggested that AMT1;5 accounts for the remaining uptake capacity in qko. Triple and quadruple amt insertion lines revealed in vivo ammonium substrate affinities of 50, 234, 61, and 4.5 μM for AMT1;1, AMT1;2, AMT1;3, and AMT1;5, respectively, but no ammonium influx activity for AMT2;1. These data suggest that two principle means of achieving effective ammonium uptake in Arabidopsis roots are the spatial arrangement of AMT1-type ammonium transporters and the distribution of their transport capacities at different substrate affinities.

Polytopic membrane proteins are essential for cellular uptake and release of nutrients. To prevent toxic accumulation, rapid shut-off mechanisms are required. Here we show that the soluble cytosolic carboxy terminus of an oligomeric ammonium transporter from Arabidopsis thaliana serves as an allosteric regulator essential for function; mutations in the C-terminal domain, conserved between bacteria, fungi and plants, led to loss of transport activity. When co-expressed with intact transporters, mutants inactivated functional subunits, but left their stability unaffected. Co-expression of two inactive transporters, one with a defective pore, the other with an ablated C terminus, reconstituted activity. The crystal structure of an Archaeoglobus fulgidus ammonium transporter (AMT) suggests that the C terminus interacts physically with cytosolic loops of the neighbouring subunit. Phosphorylation of conserved sites in the C terminus are proposed as the cognate control mechanism. Conformational coupling between monomers provides a mechanism for tight regulation, for increasing the dynamic range of sensing and memorizing prior events, and may be a general mechanism for transporter regulation.

[EN] Inventors in the field of mechanical and electronic engineering can access multitudes of components and, thanks to standardization, parts from different manufacturers can be used in combination with each other. The introduction of BioBrick standards for the assembly of characterized DNA sequences was a landmark in microbial engineering, shaping the field of synthetic biology. Here, we describe a standard for Type IIS restriction endonuclease-mediated assembly, defining a common syntax of 12 fusion sites to enable the facile assembly of eukaryotic transcriptional units. This standard has been developed and agreed by representatives and leaders of the international plant science and synthetic biology communities, including inventors, developers and adopters of Type IIS cloning methods. Our vision is of an extensive catalogue of standardized, characterized DNA parts that will accelerate plant bioengineering., Programme Grants ‘Understanding and exploiting plant and microbial metabolism’ and ‘Biotic interactions for crop productivity’, the John Innes Foundation and the Gatsby Foundation. Supported by the Engineering Nitrogen Symbiosis for Africa (ENSA) project, through a grant to the John Innes Centre from The Bill & Melinda Gates Foundation, the DOE Early Career Award and the DOE Joint BioEnergy Institute supported by the US Department of Energy, Office of Biological and Environmental through contract DE-AC02-05CH1123. The authors also acknowledge the support of COST Action FA1006, PlantEngine.

Effector-triggered immunity (ETI) is activated when plant disease resistance (R) proteins recognize the presence of pathogen effector proteins delivered into host cells. The ETI response generally encompasses a defensive 'hypersensitive response' (HR) that involves programmed cell death at the site of pathogen recognition. While many R protein and effector protein pairs are known to trigger HR, other components of the ETI signaling pathway remain elusive. Effector genes regulated by inducible promoters cause background HR due to leaky protein expression, preventing the generation of relevant transgenic plant lines. By employing the HyP5SM suicide exon, we have developed a strategy to tightly regulate effector proteins such that HR is chemically inducible and non-leaky. This alternative splicing-based gene regulation system was shown to successfully control Bs2/AvrBs2-dependent and RPP1/ATR1Δ51-dependent HR in Nicotiana benthamiana and Nicotiana tabacum, respectively. It was also used to generate viable and healthy transgenic Arabidopsis thaliana plants that inducibly initiate HR. Beyond enabling studies on the ETI pathway, our regulatory strategy is generally applicable to reduce or eliminate undesired background expression of transgenes.

Plant apyrases are nucleoside triphosphate (NTP) diphosphohydrolases (NTPDases) and have been implicated in an array of functions within the plant including the regulation of extracellular ATP. Arabidopsis encodes a family of seven membrane bound apyrases (AtAPY1–7) that comprise three distinct clades, all of which contain the five conserved apyrase domains. With the exception of AtAPY1 and AtAPY2, the biochemical and the sub-cellular characterization of the other members are currently unavailable. In this research, we have shown all seven Arabidopsis apyrases localize to internal membranes comprising the cis-Golgi, endoplasmic reticulum (ER) and endosome, indicating an endo-apyrase classification for the entire family. In addition, all members, with the exception of AtAPY7, can function as endo-apyrases by complementing a yeast double mutant (Δynd1Δgda1) which lacks apyrase activity. Interestingly, complementation of the mutant yeast using well characterized human apyrases could only be accomplished by using a functional ER endo-apyrase (NTPDase6), but not the ecto-apyrase (NTPDase1). Furthermore, the substrate specificity analysis for the Arabidopsis apyrases AtAPY1–6 indicated that each member has a distinct set of preferred substrates covering various NDPs (nucleoside diphosphates) and NTPs. Combining the biochemical analysis and sub-cellular localization of the Arabidopsis apyrases family, the data suggest their possible roles in regulating endomembrane NDP/NMP (nucleoside monophosphate) homoeostasis.

© 2015 Eudes et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Biological synthesis of pharmaceuticals and biochemicals offers an environmentally friendly alternative to conventional chemical synthesis. These alternative methods require the design of metabolic pathways and the identification of enzymes exhibiting adequate activities. Cinnamoyl, dihydrocinnamoyl, and benzoyl anthranilates are natural metabolites which possess beneficial activities for human health, and the search is expanding for novel derivatives that might have enhanced biological activity. For example, biosynthesis in Dianthus caryophyllus is catalyzed by hydroxycinnamoyl/benzoyl-CoA:anthranilate N-hydroxycinnamoyl/ benzoyltransferase (HCBT), which couples hydroxycinnamoyl-CoAs and benzoyl-CoAs to anthranilate. We recently demonstrated the potential of using yeast (Saccharomyces cerevisiae) for the biological production of a few cinnamoyl anthranilates by heterologous co-expression of 4-coumaroyl:CoA ligase from Arabidopsis thaliana (4CL5) and HCBT. Here we report that, by exploiting the substrate flexibility of both 4CL5 and HCBT, we achieved rapid biosynthesis of more than 160 cinnamoyl, dihydrocinnamoyl, and benzoyl anthranilates in yeast upon feeding with both natural and non-natural cinnamates, dihydrocinnamates, benzoates, and anthranilates. Our results demonstrate the use of enzyme promiscuity in biological synthesis to achieve high chemical diversity within a defined class of molecules. This work also points to the potential for the combinatorial biosynthesis of diverse and valuable cinnamoylated, dihydrocinnamoylated, and benzoylated products by using the versatile biological enzyme 4CL5 along with characterized cinnamoyl- CoA- and benzoyl-CoA-utilizing transferases.

Ammonium transporter (AMT) proteins of the AMT family mediate the transport of ammonium across plasma membranes. To investigate whether AMTs are regulated at the posttranscriptional level, a gene construct consisting of the cauliflower mosaic virus 35S promoter driving the Arabidopsis (Arabidopsis thaliana) AMT1;1 gene was introduced into tobacco (Nicotiana tabacum). Ectopic expression of AtAMT1;1 in transgenic tobacco lines led to high transcript levels and protein levels at the plasma membrane and translated into an approximately 30% increase in root uptake capacity for 15N-labeled ammonium in hydroponically grown transgenic plants. When ammonium was supplied as the major nitrogen (N) form but at limiting amounts to soil-grown plants, transgenic lines overexpressing AtAMT1;1 did not show enhanced growth or N acquisition relative to wild-type plants. Surprisingly, steady-state transcript levels of AtAMT1;1 accumulated to higher levels in N-deficient roots and shoots of transgenic tobacco plants in spite of expression being controlled by the constitutive 35S promoter. Moreover, steady-state transcript levels were decreased after addition of ammonium or nitrate in N-deficient roots, suggesting a role for N availability in regulating AtAMT1;1 transcript abundance. Nitrogen deficiency-dependent accumulation of AtAMT1;1 mRNA was also observed in 35S:AtAMT1;1-transformed Arabidopsis shoots but not in roots. Evidence for a regulatory role of the 3′-untranslated region of AtAMT1;1 alone in N-dependent transcript accumulation was not found. However, transcript levels of AtAMT1;3 did not accumulate in a N-dependent manner, even though the same T-DNA insertion line atamt1;1-1 was used for 35S:AtAMT1;3 expression. These results show that the accumulation of AtAMT1;1 transcripts is regulated in a N- and organ-dependent manner and suggest mRNA turnover as an additional mechanism for the regulation of AtAMT1;1 in response to the N nutritional status of plants.

Ammonium is an attractive nitrogen form for root uptake due to its permanent availability and the reduced state of the nitrogen. On the other hand, ammonium fluxes are difficult to control because ammonium represents an equilibrium between NH + 4 and NH3, which are two N forms with different membrane permeabilities. There is increasing evidence that AMT-type ammonium transporters represent the major entry pathways for root uptake of NH +. Since excess uptake of ammonium might cause toxicity and since ammonium is also released from catabolic processes within the cell, ammonium uptake across the root plasma membrane has to be tightly regulated. To take over a function in cellular ammonium homeostasis, various AMT transporters are synthesized that differ in their biochemical properties, their localization, and in their regulation at the transcriptional level. At the same time, AMT-driven transport is subject to control by the nitrogen status of a local root portion as well as of the whole plant. In this review, the focus is on the different levels at which AMT-dependent ammonium uptake is regulated and the gaps in current knowledge are highlighted.

Arabidopsis thaliana is a model organism commonly used to understand and manipulate various cellular processes in plants, and it has been used extensively in the study of secondary cell wall formation. Secondary cell wall deposition occurs after the primary cell wall is laid down, a process carried out exclusively by specialized cells such as those forming vessel and fiber tissues. Most secondary cell walls are composed of cellulose (40–50%), hemicellulose (25–30%), and lignin (20–30%). Several mutations affecting secondary cell wall biosynthesis have been isolated, and the corresponding mutants may or may not exhibit obvious biochemical composition changes or visual phenotypes since these mutations could be masked by compensatory responses. Staining procedures have historically been used to show differences on a cellular basis. These methods are exclusively visual means of analysis; nevertheless their role in rapid and critical analysis is of great importance. Congo red and calcofluor white are stains used to detect polysaccharides, whereas Maule and phloroglucinol are commonly used to determine differences in lignin, and toluidine blue O is used to differentially stain polysaccharides and lignin. The seemingly simple techniques of sectioning, staining, and imaging can be a challenge for beginners. Starting with sample preparation using the A. thaliana model, this study details the protocols of a variety of staining methodologies that can be easily implemented for observation of cell and tissue organization in secondary cell walls of plants.

The glycosyltransferases (GTs) are an important and functionally diverse family of enzymes involved in glycan and glycoside biosynthesis. Plants have evolved large families of GTs which undertake the array of glycosylation reactions that occur during plant development and growth. Based on the Carbohydrate-Active enZymes (CAZy) database, the genome of the reference plant Arabidopsis thaliana codes for over 450 GTs, while the rice genome (Oryza sativa) contains over 600 members. Collectively, GTs from these reference plants can be classified into over 40 distinct GT families. Although these enzymes are involved in many important plant specific processes such as cell-wall and secondary metabolite biosynthesis, few have been functionally characterized. We have sought to develop a plant GTs clone resource that will enable functional genomic approaches to be undertaken by the plant research community. In total, 403 (88%) of CAZy defined Arabidopsis GTs have been cloned, while 96 (15%) of the GTs coded by rice have been cloned. The collection resulted in the update of a number of Arabidopsis GT gene models. The clones represent full-length coding sequences without termination codons and are Gateway® compatible. To demonstrate the utility of this JBEI GT Collection, a set of efficient particle bombardment plasmids (pBullet) was also constructed with markers for the endomembrane. The utility of the pBullet collection was demonstrated by localizing all members of the Arabidopsis GT14 family to the Golgi apparatus or the endoplasmic reticulum (ER). Updates to these resources are available at the JBEI GT Collection website http://www.addgene.org/.

Following publication of this work [1] we noticed that an outdated protocol for metabolite separation has been accidentally described in “LC-MS analysis of cinnamoyl anthranilates and precursors” paragraph of the materials and methods section. The correct protocol is shown below.

Ammonium and urea are important nitrogen sources for autotrophic organisms. Plant genomes encode several families of specific transporters for these molecules, plus other uptake mechanisms such as aquaporins and ABC transporters. Selaginella and Physcomitrella are representatives of lycophytes and bryophytes, respectively, and the recent completion of their genome sequences provided us with an opportunity for comparative genome studies, with special emphasis on the adaptive processes that accompanied the conquest of dry land and the evolution of a vascular system. Our phylogenetic analysis revealed that the number of genes encoding urea transporters underwent a progressive reduction during evolution, eventually down to a single copy in vascular plants. Conversely, no clear evolutionary pattern was found for ammonium transporters, and their number and distribution in families varies between species. In particular Selaginella, similar to rice, favors the AMT2/MEP family of ammonium transporters over the plant-specific AMT1 type. In comparison, Physcomitrella presents several members belonging to both families.

Lignin composition in relation to its basic phenylpropanoid units, particularly the syringyl to guaiacyl (S/G) ratio, is an important property for biomass characterization and varies greatly as a function of species, genotype and environment. A rapid screening method is highly desirable to assess lignin composition in a large number of samples. We have developed a nondestructive and label-free Fourier transform Raman (FT-Raman) spectroscopic method that is capable of rapidly and reliably measuring the S/G ratio with minimal sample preparation. A variety of feedstocks, including hardwood (Eucalyptus globulus), softwood (Pinus radiata), herbaceous plants (Zea mays, Panicum virgatum, and Sorghum bicolor), and a model dicot (Arabidopsis thaliana) were measured using this technique and the corresponding S/G ratio was calculated after spectral deconvolution based on the S and G bands identified using a known library of model compounds. The results obtained using this technique were successfully validated by pyrolysis-gas chromatography/mass spectrometry (pyro-GC/MS). This technique holds significant promise in the rapid screening of engineered feedstocks as part of a comprehensive screening methodology that is correlated with biomass recalcitrance.

Biological synthesis of therapeutic drugs beneficial for human health using microbes offers an alternative production strategy to the methods that are commonly employed such as direct extraction from source organisms or chemical synthesis. In this study, we evaluated the potential for yeast (Saccharomyces cerevisiae) to be used as a catalyst for the synthesis of tranilast and various tranilast analogs (cinnamoyl anthranilates). Several studies have demonstrated that these phenolic amides have antioxidant properties and potential therapeutic benefits including antiinflammatory, antiproliferative, and antigenotoxic effects. The few cinnamoyl anthranilates naturally produced in plants such as oats and carnations result from the coupling of various hydroxycinnamoyl-CoAs to anthranilic acid. In order to achieve the microbial production of tranilast and several of its analogs, we engineered a yeast strain to co-express a 4-coumarate/CoA ligase (4CL, EC 6.2.1.12) from Arabidopsis thaliana and a hydroxycinnamoyl/benzoyl-CoA/anthranilate N-hydroxycinnamoyl/benzoyltransferase (HCBT, EC 2.3.1.144) from Dianthus caryophyllus. This modified yeast strain allowed us to produce tranilast and 26 different cinnamoyl anthranilate molecules within a few hours after exogenous supply of various combinations of cinnamic acids and anthranilate derivatives. Our data demonstrate the feasibility of rapidly producing a wide range of defined cinnamoyl anthranilates in yeast and underline a potential for the biological designed synthesis of naturally and non-naturally occurring molecules.

Homotypic and heterotypic protein interactions are crucial for all levels of cellular function, including architecture, regulation, metabolism, and signaling. Therefore, protein interaction maps represent essential components of post-genomic toolkits needed for understanding biological processes at a systems level. Over the past decade, a wide variety of methods have been developed to detect, analyze, and quantify protein interactions, including surface plasmon resonance spectroscopy, NMR, yeast two-hybrid screens, peptide tagging combined with mass spectrometry and fluorescence-based technologies. Fluorescence techniques range from co-localization of tags, which may be limited by the optical resolution of the microscope, to fluorescence resonance energy transfer-based methods that have molecular resolution and can also report on the dynamics and localization of the interactions within a cell. Proteins interact via highly evolved complementary surfaces with affinities that can vary over many orders of magnitude. Some of the techniques described in this review, such as surface plasmon resonance, provide detailed information on physical properties of these interactions, while others, such as two-hybrid techniques and mass spectrometry, are amenable to high-throughput analysis using robotics. In addition to providing an overview of these methods, this review emphasizes techniques that can be applied to determine interactions involving membrane proteins, including the split ubiquitin system and fluorescence-based technologies for characterizing hits obtained with high-throughput approaches. Mass spectrometry-based methods are covered by a review by Miernyk and Thelen (2008; this issue, pp. 597-609). In addition, we discuss the use of interaction data to construct interaction networks and as the basis for the exciting possibility of using to predict interaction surfaces.

H(2)O(2) is a relatively long-lived reactive oxygen species that signals between cells and organisms. H(2)O(2) signalling in plants is essential for response to stress, defence against pathogens and the regulation of programmed cell death. Although H(2)O(2) diffusion across membranes is often considered as a passive property of lipid bilayers, native membranes represent significant barriers for H(2)O(2). In the present study we addressed the question of whether channels might facilitate H(2)O(2) conduction across plasma membranes. The expression of several plant plasma membrane aquaporins in yeast, including PIP2;1 from Arabidopsis (where PIP is plasma membrane intrinsic protein), enhanced the toxicity of H(2)O(2) and increased the fluorescence of dye-loaded yeast when exposed to H(2)O(2). The sensitivity of aquaporin-expressing yeast to H(2)O(2) was altered by mutations that alter gating and the selectivity of the aquaporins. The conduction of water, H(2)O(2) and urea was compared, using molecular dynamics simulations based on the crystal structure of SoPIP2;1 from spinach. The calculations identify differences in the conduction between the substrates and reveal channel residues critically involved in H(2)O(2) conduction. The results of the calculations on tetramers and monomers are in agreement with the biochemical data. Taken together, the results strongly suggest that plasma membrane aquaporin pores determine the efficiency of H(2)O(2) signalling between cells. Aquaporins are present in most species and their capacity to facilitate the diffusion of H(2)O(2) may be of physiological significance in many organisms and particularly in communication between different species.

While membrane transporters mediating ammonium uptake across the plasma membrane have been well described at the molecular level, little is known about compartmentation and cellular export of ammonium. (The term ammonium is used to denote both NH3 and NH4 + and chemical symbols are used when specificity is required.) We therefore developed a yeast (Saccharomyces cerevisiae) complementation approach and isolated two Arabidopsis (Arabidopsis thaliana) genes that conferred tolerance to the toxic ammonium analog methylammonium in yeast. Both genes, AtTIP2;1 and AtTIP2;3, encode aquaporins of the tonoplast intrinsic protein subfamily and transported methylammonium or ammonium in yeast preferentially at high medium pH. AtTIP2;1 expression in Xenopus oocytes increased 14C-methylammonium accumulation with increasing pH. AtTIP2;1- and AtTIP2;3-mediated methylammonium detoxification in yeast depended on a functional vacuole, which was in agreement with the subcellular localization of green fluorescent protein-fusion proteins on the tonoplast in planta. Transcript levels of both AtTIPs were influenced by nitrogen supply but did not follow those of the nitrogen-derepressed ammonium transporter gene AtAMT1;1. Transgenic Arabidopsis plants overexpressing AtTIP2;1 did not show altered ammonium accumulation in roots after ammonium supply, although AtTIP2;1 mRNA levels in wild-type plants were up-regulated under these conditions. This study shows that AtTIP2;1 and AtTIP2;3 can mediate the extracytosolic transport of methyl-NH2 and NH3 across the tonoplast membrane and may thus participate in vacuolar ammonium compartmentation.

Lignin, a highly complex but integral part of plant cell wall , is indigestible and therefore a concern in biomass deconstruction for cost effective biofuel production. A way to address this issue is to manipulate the plant to generate a cell wall that is amenable to breakdown. However, little is know about the actual assembly of lignin during plant cell wall biosynthesis. Fluorescent Lifetime Imaging Microscopy (FLIM) utilizes the lifetime of the auto-fluorophore signal generated, rather than its intensity , to create an image. An interesting characteristic of lignin is that it is highly auto-fluorescent in the UV excitation region due to its phenolic ring composition. Thus, it may be possible to infer structural and organizational information of lignin polymerization using this imaging technique. In this study FLIM is used to resolve differences in lignification in the plant cell wall during development.

A review of the potential for biofuel production in the United States from timber and non-grain crops., The development of second-generation biofuels - those that do not rely on grain crops as inputs - will require a diverse set of feedstocks that can be grown sustainably and processed cost-effectively. Here we review the outlook and challenges for meeting hoped-for production targets for such biofuels in the United States.