Search

Introduction: Currently, there are no non-surgical FDA-approved biological approaches to accelerate fracture repair. Injectable therapies designed to stimulate bone healing represent an exciting alternative to surgically implanted biologics, however, the translation of effective osteoinductive therapies remains challenging due to the need for safe and effective drug delivery. Hydrogel-based microparticle platforms may be a clinically relevant solution to create controlled and localized drug delivery to treat bone fractures. Here, we describe poly (ethylene glycol) dimethacrylate (PEGDMA)-based microparticles, in the shape of microrods, loaded with beta nerve growth factor (β-NGF) for the purpose of promoting fracture repair.Methods: Herein, PEGDMA microrods were fabricated through photolithography. PEGDMA microrods were loaded with β-NGF and in vitro release was examined. Subsequently, bioactivity assays were evaluated in vitro using the TF-1 tyrosine receptor kinase A (Trk-A) expressing cell line. Finally, in vivo studies using our well-established murine tibia fracture model were performed and a single injection of the β-NGF loaded PEGDMA microrods, non-loaded PEGDMA microrods, or soluble β-NGF was administered to assess the extent of fracture healing using Micro-computed tomography (µCT) and histomorphometry.Results:In vitro release studies showed there is significant retention of protein within the polymer matrix over 168 hours through physiochemical interactions. Bioactivity of protein post-loading was confirmed with the TF-1 cell line. In vivo studies using our murine tibia fracture model show that PEGDMA microrods injected at the site of fracture remained adjacent to the callus for over 7 days. Importantly, a single injection of β-NGF loaded PEGDMA microrods resulted in improved fracture healing as indicated by a significant increase in the percent bone in the fracture callus, trabecular connective density, and bone mineral density relative to soluble β-NGF control indicating improved drug retention within the tissue. The concomitant decrease in cartilage fraction supports our prior work showing that β-NGF promotes endochondral conversion of cartilage to bone to accelerate healing.Discussion: We demonstrate a novel and translational method wherein β-NGF can be encapsulated within PEGDMA microrods for local delivery and that β-NGF bioactivity is maintained resulting in improved bone fracture repair.

Despite years of effort, sustained delivery of protein therapeutics remains an unmet need due to three primary challenges - dose, duration, and stability. The work presented here provides a design methodology for polycaprolactone reservoir-based thin film devices suitable for long-acting protein delivery to the back of the eye. First, the challenge of formulating highly concentrated protein in a device reservoir was addressed by improving stability with solubility-reducing excipients. Next, predictive correlations between design parameters and device performance were developed to provide a methodology to achieve a target product profile. Prototype devices were designed using this methodology to achieve desired device size, release rate, therapeutic payload, and protein stability, assessed by in vitro studies. Finally, prototype tolerability was established in a non-human primate model. The design methodology presented here is widely applicable to reservoir-based sustained delivery devices for proteins and provides a general device design framework.

The human breast undergoes lifelong remodeling in response to estrogen and progesterone, but hormone exposure also increases breast cancer risk. Here, we use single-cell analysis to identify distinct mechanisms through which breast composition and cell state affect hormone signaling. We show that prior pregnancy reduces the transcriptional response of hormone-responsive (HR+) epithelial cells, whereas high body mass index (BMI) reduces overall HR+ cell proportions. These distinct changes both impact neighboring cells by effectively reducing the magnitude of paracrine signals originating from HR+ cells. Because pregnancy and high BMI are known to protect against hormone-dependent breast cancer in premenopausal women, our findings directly link breast cancer risk with person-to-person heterogeneity in hormone responsiveness. More broadly, our findings illustrate how cell proportions and cell state can collectively impact cell communities through the action of cell-to-cell signaling networks.

Cells decide whether to grow and divide by integrating internal and external signals. Non-autonomous cell growth and proliferation occurs when microenvironmental signals from neighboring cells, both physical and secreted, license this decision. Understanding these processes is vital to developing an accurate framework for cell-cell interactions and cellular decision-making, and is useful for advancing new therapeutic strategies to prevent dysregulated growth. Here, we review some recent examples of non-autonomous cell growth in the mammary gland and tumor cell proliferation.

Oral delivery of therapeutics is the preferred route for systemic drug administration due to ease of access and improved patient compliance. However, many therapeutics suffer from low oral bioavailability due to low pH and enzymatic conditions, poor cellular permeability, and low residence time. Microfabrication techniques have been used to create planar, asymmetric microdevices for oral drug delivery to address these limitations. The geometry of these microdevices facilitates prolonged drug exposure with unidirectional release of drug toward gastrointestinal epithelium. While these devices have significantly enhanced drug permeability in vitro and in vivo, loading drug into the micron-scale reservoirs of the devices in a low-waste, high-capacity manner remains challenging. Here, we use picoliter-volume inkjet printing to load topotecan and insulin into planar microdevices efficiently. Following a simple surface functionalization step, drug solution can be spotted into the microdevice reservoir. We show that relatively high capacities of both topotecan and insulin can be loaded into microdevices in a rapid, automated process with little to no drug waste.

ObjectiveLipid mediators derived from omega-3 polyunsaturated fatty acids such as resolvin D1 (RvD1) accelerate the resolution of inflammation and have potential as vascular therapeutics. The objective of this study was to evaluate local perivascular delivery of RvD1 as a means to attenuate neointimal hyperplasia in a rat model of arterial injury.MethodsSmooth muscle cells were harvested from rat aortas to study the effects of RvD1 on rat arterial vascular smoothmuscle cell responses invitro, with focus on inflammation, proliferation, migration, cytoskeletal changes, and cytotoxicity. The safety and efficacy of perivascular delivery of RvD1 through thin biodegradable three-layered poly(lactic-co-glycolic acid) wraps or 25% Pluronic F127 gels were studied in a rat model of carotid angioplasty. Atotal of 200ng of RvD1 was loaded into each construct for perivascular delivery after injury. Morphometric and histologic analyses were performed 3 and 14days after injury.ResultsRvD1 attenuated rat arterial vascular smooth muscle cell inflammatory pathways, proliferation, migration, and mitogen-induced cytoskeletal changes invitro, without evidence of cytotoxicity. RvD1-loaded wraps reduced neointimal formation after carotid angioplasty by 59% vs no-wrap controls (P= .001) and by 45% vs vehicle-wrap controls (P= .002). RvD1-loaded Pluronic gels similarly reduced neointimal formation by 49% vs no-gel controls (P= .02) and by 52% vs vehicle-gel controls (P= .02). No group was associated with infection, thrombosis, or negative vessel remodeling. Wraps were found to be easier to apply than gel constructs. Ki67 proliferation index was significantly lower in RvD1-loaded wrap-treated arteries compared with both no-wrap and vehicle-wrap controls at both 3 and 14days after injury (65% vs no-wrap group and 70% vs vehicle-wrap group at day 3, 49% vs both control groups at day 14; P< .05). Similarly, oxidative stress (30%and 29%; P< .05) and nuclear factor κB activation (42% and 45%; P< .05) were significantly lower in the RvD1-loaded wrap group compared with both no-wrap and vehicle-wrap controls at 3days after injury.ConclusionsLocal perivascular delivery of RvD1 attenuates formation of neointimal hyperplasia without associated toxicity in a rat model of carotid angioplasty. This effect is likely due to attenuation of inflammatory pathways as well as decreased arterial smooth muscle cell proliferation and migration.

Current administration of ranibizumab and other therapeutic macromolecules to the vitreous and retina carries ocular risks, a high patient treatment burden, and compliance barriers that can lead to suboptimal treatment. Here we introduce a device that produces sustained release of ranibizumab in the vitreous cavity over the course of several months. Composed of twin nanoporous polymer thin films surrounding a ranibizumab reservoir, these devices provide release of ranibizumab over 16weeks in vitro and 12weeks in vivo, without exhausting the initial drug payload. Following implantation in vivo, devices were well-tolerated and showed no sign of immune response. This platform presents a potential solution to the challenge of delivering protein therapeutics to the vitreous and retina for sustained periods of time.

PurposeThe effectiveness of Tenofovir based HIV pre-exposure prophylaxis (PrEP) is proven, but hinges on correct and consistent use. User compliance and therapeutic effectiveness can be improved by long acting drug delivery systems. Here we describe a thin-film polymer device (TFPD) as a biodegradable subcutaneous implant for PrEP.MethodsA thin-film polycaprolactone (PCL) membrane controls drug release from a reservoir. To achieve membrane controlled release, TAF requires a formulation excipient such as PEG300 to increase the dissolution rate and reservoir solubility. Short-term In vitro release studies are used to develop an empirical design model, which is applied to the production of in vitro prototype devices demonstrating up to 90-days of linear release and TAF chemical stability.ResultsThe size and shape of the TFPD are tunable, achieving release rates ranging from 0.5 to 4.4mg/day in devices no larger than a contraceptive implant. Based on published data for oral TAF, subcutaneous constant-rate release for HIV PrEP is estimated at 8-fold range.

Patterned three-dimensional (3D) cell culture models aim to more accurately represent the in vivo architecture of a tissue for the purposes of testing drugs, studying multicellular biology, or engineering functional tissues. However, patterning 3D multicellular structures within very soft hydrogels (

Chronic fibrosis caused by acute myocardial infarction (MI) leads to increased morbidity and mortality due to cardiac dysfunction. We have developed a therapeutic materials strategy that aims to mitigate myocardial fibrosis by utilizing injectable polymeric microstructures to mechanically alter the microenvironment. Polymeric microstructures were fabricated using photolithographic techniques and studied in a three-dimensional culture model of the fibrotic environment and by direct injection into the infarct zone of adult rats. Here, we show dose-dependent down-regulation of expression of genes associated with the mechanical fibrotic response in the presence of microstructures. Injection of this microstructured material into the infarct zone decreased levels of collagen and TGF-β, increased elastin deposition and vascularization in the infarcted region, and improved functional outcomes after six weeks. Our results demonstrate the efficacy of these discrete anti-fibrotic microstructures and suggest a potential therapeutic materials approach for combatting pathologic fibrosis.

Cluster-size dependent behavior of pancreatic beta-cells has direct implications in islet transplantation therapy for type I diabetes treatment. Control over the cluster size enables evaluation of cluster-size-dependent function, ultimately leading to the production of beta-cell clusters with improved transplant efficacy. This work for the first time demonstrates the use of microcontact-printing-based cell patterning of discrete two- and three-dimensional clusters of pancreatic beta-cells. Both single and multiple cell layers are confined to a 2D area by attaching to patterns of covalently linked laminin and not adhering to surrounding polyethylene glycol. Cell clusters were successfully formed within 24 h for printed patterns in the range 40-120 microm, and simple modulation of the initial cell seeding density leads to the formation of multiple cell layers. Semiquantitative fluorescence microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were used to extensively characterize the surface chemistry. This technique offers exceptional control over cell cluster shape and size, and not only provides an effective tool to study the cluster-size-dependent behavior of pancreatic beta-cells but also has potential applicability to numerous other cell lines.