Search

Mixed ionic–electronic conduction and space-charge polarization determine the electrical response of MAPbl3-based horizondal devices close to equilibrium.

Generalized energy diagrams facilitate the understanding of the ionic and electronic charge carrier equilibrium in the bulk and at interfaces of devices based on mixed conductors, such as hybrid perovskite solar cells.

Halide perovskites (HPs) are promising candidates for optoelectronic devices, such as solar cells or light-emitting diodes. Despite recent progress in performance optimization and low-cost manufacturing, their commercialization remains hindered due to structural instabilities. While essential to the development of the technology, the relation between the microscopic properties of HPs and the relevant degradation mechanisms is still not well understood. The sensitivity of HPs toward electron-beam irradiation poses significant challenges for transmission electron microscopy (TEM) investigations of structure and degradation mechanisms at the atomic scale. However, technological advances and the development of direct electron cameras (DECs) have opened up a completely new field of electron microscopy: four-dimensional scanning TEM (4D-STEM). From a 4D-STEM dataset, it is possible to extract not only the intensity signal for any STEM detector geometry but also the phase information of the specimen. This work aims to show the potential of 4D-STEM, in particular, electron exit-wave phase reconstructions via focused probe ptychography as a low-dose and dose-efficient technique to image the atomic structure of beam-sensitive HPs. The damage mechanism under conventional irradiation is described and atomically resolved almost aberration-free phase images of three all-inorganic HPs, CsPbBr3, CsPbIBr2, and CsPbI3, are presented with a resolution down to the aperture-constrained diffraction limit.

Conjugated polymers achieve redox activity in electrochemical devices by combining redox-active, electronically conducting backbones with ion-transporting side chains that can be tuned for different electrolytes. In aqueous electrolytes, redox activity can be accomplished by attaching hydrophilic side chains to the polymer backbone, which enables ionic transport and allows volumetric charging of polymer electrodes. While this approach has been beneficial for achieving fast electrochemical charging in aqueous solutions, little is known about the relationship between water uptake by the polymers during electrochemical charging and the stability and redox potentials of the electrodes, particularly for electron-transporting conjugated polymers. We find that excessive water uptake during the electrochemical charging of polymer electrodes harms the reversibility of electrochemical processes and results in irreversible swelling of the polymer. We show that small changes of the side chain composition can significantly increase the reversibility of the redox behavior of the materials in aqueous electrolytes, improving the capacity of the polymer by more than one order of magnitude. Finally, we show that tuning the local environment of the redox-active polymer by attaching hydrophilic side chains can help to reach high fractions of the theoretical capacity for single-phase electrodes in aqueous electrolytes. Our work shows the importance of chemical design strategies for achieving high electrochemical stability for conjugated polymers in aqueous electrolytes.

Mastering the complexity of mixed ionic–electronic conduction in hybrid perovskite solar cells is a most critical challenge in the quest for further developing and, eventually, commercializing this...

Layered hybrid halide perovskites are known to be more environmentally stable than their 3D analogues. The enhanced stability is particularly relevant for Dion–Jacobson-type layered perovskites due...

Layered hybrid perovskites based on Dion-Jacobson phases are of interest to various optoelectronic applications. However, the understanding of their structure-property relationships remains limited. Here, we present a systematic study of Dion-Jacobson perovskites based on (S)PbX4 (n = 1) compositions incorporating phenylene-derived aromatic spacers (S) with different anchoring alkylammonium groups and halides (X = I, Br). We focus our study on 1,4-phenylenediammonium (PDA), 1,4-phenylenedimethylammonium (PDMA), and 1,4-phenylenediethylammonium (PDEA) spacers. Systems based on PDA did not form a well-defined layered structure, showing the formation of a 1D structure instead, whereas the extension of the alkyl chains to PDMA and PDEA rendered them compatible with the formation of a layered structure, as shown by X-ray diffraction and solid-state NMR spectroscopy. In addition, the control of the spacer length affects optical properties and environmental stability, which is enhanced for longer alkyl chains and bromide compositions. This provides insights into their design for optoelectronic applications.

Metal halide perovskites are the first solution processed semiconductors that can compete in their functionality with conventional semiconductors, such as silicon. Over the past several years, perovskite semiconductors have reported breakthroughs in various optoelectronic devices, such as solar cells, photodetectors, light emitting and memory devices, and so on. Until now, perovskite semiconductors face challenges regarding their stability, reproducibility, and toxicity. In this Roadmap, we combine the expertise of chemistry, physics, and device engineering from leading experts in the perovskite research community to focus on the fundamental material properties, the fabrication methods, characterization and photophysical properties, perovskite devices, and current challenges in this field. We develop a comprehensive overview of the current state-of-the-art and offer readers an informed perspective of where this field is heading and what challenges we have to overcome to get to successful commercialization. published

Lead halide perovskites are considered to be most promising photovoltaic materials. Highest efficiency and improved stability of perovskite solar cells have been achieved by using cation and anion mixtures. Experimental information on electronic and ionic charge carriers is key to evaluate device performance, as well as processes of photo‐decomposition and photo‐demixing which are observed in these materials. Here, we measure ionic and electronic transport properties and investigate various cation and anion substitutions with a special eye on their photo‐ionic effect, following our previous study on CH3NH3PbI3, where we found that light enhances not only electronic but also ionic conductivities. We find that this phenomenon is very sensitive to the nature of the halide, while the cationic substitutions are less relevant. Based on the observation that the ionic conductivity enhancement found for iodide perovskites is significantly weakened by bromide substitution, we provide a chemical rationale for the photo‐demixing in mixed halide compositions., The photo‐effect on ion conduction in mixed cation and halide perovskites is studied. Unlike A‐site substitution, anion replacement is of great influence. In I‐Br mixtures the differences in hole localization and defect formation favor (reversible) photo‐demixing (the situation in the right part is simplified as the interstitial neutral iodine is further stabilized by ionic rearrangement, and the hole in the bromide is delocalized over several regular anions).

Electron transfer theories predict that rates of charge transfer vary with the dielectric properties of the environment where the reaction occurs. An appropriate description of this relation for molecular sensitized semiconductors in electrolytes must account for the restricted geometry of these systems compared to “free” molecules in solution. Here, we explore the extent to which dielectric properties of the surrounding medium can explain the rates of charge transfer processes, measured using transient absorption spectroscopy, involving photo-oxidized thiophene–carbazole-based molecules on oxide semiconductors in inert or redox-active electrolytes. We observe no clear correlation between the activation energy of hole hopping between molecules on oxide surfaces or the recombination rate between photogenerated electrons in the oxide and holes on the adsorbed molecules and the dielectric properties of the surrounding solvent. The activation energy of hole hopping tends to increase with time following initial photogeneration of the holes, which we attribute to energetic disorder in the molecular monolayer. The recombination rate in different solvents scales with the hole hopping rate. It can also be varied by adding inert salts in the electrolyte and by controlling the access of cations in solution to the oxide surface. Finally, we show that fast electron transfer from cobalt complexes to photo-oxidized molecules in solvents with low polarity is verified, but the kinetics are limited by the ionic dissociation. Our study highlights the importance of electronic coupling between the redox-active components and their solvation, besides the reorganization energy and the driving force, in the determination of electron transfer rates at molecular sensitized interfaces in electrolytes.

Mixed halide perovskites have attracted great interest for applications in solar cells, light emitting diodes and other optoelectronic devices due to their tunability of optical properties. However, these mixtures tend to undergo de-mixing into separate phases when exposed to light (photo de-mixing), which compromises their operational reliability in devices. Several models have been proposed to elucidate the origin of the photo de-mixing process, including the contribution of strain, electronic carrier stabilization due to composition dependent electronic energies, and light induced ionic defect formation. In this perspective we discuss these hypotheses and focus on the importance of investigating defect chemical and ion transport aspects in these systems. We discuss possible optoionic effects that can contribute to the driving force of de-mixing and should therefore be considered in the overall energy balance of the process. These effects include the selective self-trapping of photo-generated holes as well as scenarios involving multiple defects. This perspective provides new insights into the origin of photo de-mixing from a defect chemistry point of view, raising open questions and opportunities related to the phase behavior of mixed halide perovskites.

The nature of polaron formation has profound implications on the transport of charge carriers in conjugated polymers, but still remains poorly understood. Here we develop in situ electrochemical resonant Raman spectroscopy, a powerful structural probe that allows direct observation of polaron formation. We report that polaron formation in ordered poly(3-hexyl)thiophene (P3HT) polymer domains (crystalline phase) results in less pronounced changes in molecular conformation, indicating smaller lattice relaxation, compared to polarons generated in disordered polymer domains (amorphous phase) for which we observe large molecular conformational changes. These conformational changes are directly related to the effective conjugation length of the polymer. Furthermore, we elucidate how blending the P3HT polymer with phenyl C-61 butyric acid methyl ester (PCBM) affects polaron formation in the polymer. We find that blending disturbs polymer crystallinity, reducing the density of polarons that can form upon charge injection at the same potential, whilst the lost capacity is partly restored during post-deposition thermal annealing. Our study provides direct spectroscopic evidence for a lower degree of lattice reorganisation in crystalline (and therefore more planarised) polymers than in conformationally disordered polymers. This observation is consistent with higher charge carrier mobility and better device performance commonly found in crystalline polymer materials.

Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side‑products. This is particularly important for bioelectronic devices which are designed to operate in biological systems. While redox‑active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side‑reactions with molecular oxygen during device operation. We show that this electrochemical side reaction yields hydrogen peroxide (H2O2), a reactive side‑product, which may be harmful to the local biological environment and may also accelerate device degradation. We report a design strategy for the development of redox-active organic semiconductors based on donor-acceptor copolymers that prevent the formation of H2O2 during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte‑gated devices in application-relevant environments.

Solid electrolyte interphase (SEI) layers form on sensitized-TiO2 photoanodes and platinum counter electrodes when dye-sensitized solar cells (DSSCs) are subjected to an accelerated aging protocol (e.g., heating at 85 °C in the dark for 500 h). To understand how this impacts device operation, we conducted an electrochemical impedance spectroscopy study and found that the SEI induces an additional electron-transfer process from the TiO2 to the electrolyte. This is materialized by the onset of a new charge-transfer semicircle at higher frequencies, predominantly visible under bias voltages similar to and greater than the open-circuit voltage. Our results emphasize the detrimental role of SEI formation on device performance and lifetime. Additionally, nanosecond transient absorption spectroscopy showed that SEI formation reduced the rate of oxidized dye regeneration. We also found that a proportion of the photogenerated holes on the dyes were transferred to the SEI itself. A prolonged aging duration led to the electrode’s mesoporosity network being entirely clogged by the SEI, thus impeding efficient transport of the electrolyte redox couple and being responsible for a further decline in photovoltaic performances.

This paper presents a field-trial of organic photovoltaic (OPV) technology used within a practical application for rural electrification in Rwanda. Fourteen, large area, flexible, ITO-free, roll-to-roll processed OPV modules, encapsulated with low-cost materials, were installed on corrugated steel roofs at two sites in a rural village in Southern Rwanda and subject to continuous monitoring. This field-trial exposed modules to very high levels of insolation, in particular in the UV, high temperatures and heavy rainfall. Results show that the modules exhibit practical lifetimes (to degrade by 20% of their initial capacity) of between 2½ and 5 months, a value 5–6 times lower than control modules kept both in the dark and outdoors in Roskilde, Denmark. Degradation was primarily the result of extensive delamination caused by failure of the non-UV stable encapsulation, which led to decay in the FF, Voc and Isc of the module.

Methylammonium lead iodide (MAPI) is the archetype of the intensively researched class of perovskites for photovoltaics. Nonetheless, even equilibrium aspects are far from being fully understood. Here we discuss equilibrium space charge effects at the MAPI/TiO2 and MAPI/Al2O3 interfaces, which are of paramount significance for solar cells. Different from the photovoltaic literature in which such built-in potentials are considered as being generated solely by electronic charge carriers, we will apply a generalized picture that considers the equilibrium distribution of both ionic and electronic carriers. We give experimental evidences that it is the ions that are responsible for the equilibrium space charge potential in MAPI, the reason being a pronounced ion adsorption at the contacts. The occurrence of equilibrium space charge effects generated by ionic redistribution has not been considered for photovoltaic materials and as such provides a novel path for modifying charge-selective interfaces in solar cells, as well as a better understanding of the behavior in mesoporous systems.

We report a design strategy that allows the preparation of solution processable n type materials from low boiling point solvents for organic electrochemical transistors (OECTs). The polymer backbone is based on NDI-T2 copolymers where a branched alkyl side chain is gradually exchanged for a linear ethylene glycol based side chain. A series of random copolymers are prepared with glycol side chain percentages of 0, 10, 25, 50, 75, 90 and 100 with respect to the alkyl side chains. These are characterized in order to study the influence of the polar side chains on interaction with aqueous electrolytes, their electrochemical redox reactions and performance in OECTs when operated in aqueous electrolytes. We observe that glycol side chain percentages of >50 % are required to achieve volumetric charging while lower glycol chain percentages show a mixed operation with high required voltages to allow for bulk charging of the organic semiconductor. A strong dependence of the electron mobility on the fraction of glycol chains was found for copolymers based on NDI-T2, with a significant drop as alkyl side chains are replaced by glycol side chains.

In dye-sensitized solar cells (DSSCs) photogenerated positive charges are normally considered to be carried away from the dyes by a separate phase of hole-transporting material (HTM). We show that there can also be significant transport within the dye monolayer itself before the hole reaches the HTM. We quantify the fraction of dye regeneration in solid-state DSSCs that can be attributed to this process. By using cyclic voltammetry and transient anisotropy spectroscopy, we demonstrate that the rate of interdye hole transport is prevented both on micrometer and nanometer length scales by reducing the dye loading on the TiO2 surface. The dye regeneration yield is quantified for films with high and low dye loadings (with and without hole percolation in the dye monolayer) infiltrated with varying levels of HTM. Interdye hole transport can account for >50% of the overall dye regeneration with low HTM pore filling. This is reduced to about 5% when the infiltration of the HTM in the pores is optimized in 2 μm th...

Charge recombination between oxidized dyes attached to mesoporous TiO2 and electrons in the TiO2 was studied in inert electrolytes using transient absorption spectroscopy. Simultaneously, hole transport within the dye monolayers was monitored by transient absorption anisotropy. The rate of recombination decreased when hole transport was inhibited selectively, either by decreasing the dye surface coverage or by changing the electrolyte environment. From Monte Carlo simulations of electron and hole diffusion in a particle, modeled as a cubic structure, we identify the conditions under which hole lifetime depends on the hole diffusion coefficient for the case of normal (disorder free) diffusion. From simulations of transient absorption and transient absorption anisotropy, we find that the rate and the dispersive character of hole transport in the dye monolayer observed spectroscopically can be explained by incomplete coverage and disorder in the monolayer. We show that dispersive transport in the dye monolayer combined with inhomogeneity in the TiO2 surface reactivity can contribute to the observed stretched electron–hole recombination dynamics and electron density dependence of hole lifetimes. Our experimental and computational analysis of lateral processes at interfaces can be applied to investigate and optimize charge transport and recombination in solar energy conversion devices using electrodes functionalized with molecular light absorbers and catalysts.

We investigated the influence of moisture on methylammonium lead iodide perovskite (MAPbI3) films and solar cells derived from non-stoichiometric precursor mixtures. We followed both the structural changes under controlled air humidity through in situ X-ray diffraction, and the electronic behavior of devices prepared from these films. A small PbI2 excess in the films improved the stability of the perovskite compared to stoichiometric samples. We assign this to excess PbI2 layers at the perovskite grain boundaries or to the termination of the perovskite crystals with Pb and I. In contrast, the MAI-excess films composed of smaller perovskite crystals showed increased electronic disorder and reduced device performance owing to poor charge collection. Upon exposure to moisture followed by dehydration (so-called solvent annealing), these films recrystallized to form larger, highly oriented crystals with fewer electronic defects and a remarkable improvement in photocurrent and photovoltaic efficiency.

In this study, we report high performance organic solar cells with spray coated hole-transport and active layers. With optimized ink formulations we are able to deposit films with controlled thickness and very low surface roughness (

Using drift-diffusion simulations, we investigate the voltage dependence of the dark current in single carrier devices typically used to determine charge-carrier mobilities. For both low and high voltages, the current increases linearly with the applied voltage. Whereas the linear current at low voltages is mainly due to space charge in the middle of the device, the linear current at high voltage is caused by charge-carrier saturation due to a high degree of injection. As a consequence, the current density at these voltages does not follow the classical square law derived by Mott and Gurney, and we show that for trap-free devices, only for intermediate voltages, a space-charge-limited drift current can be observed with a slope that approaches a value of two. We show that, depending on the thickness of the semiconductor layer and the size of the injection barriers, the two linear current-voltage regimes can dominate the whole voltage range, and the intermediate Mott-Gurney regime can shrink or disappear. In this case, which will especially occur for thicknesses and injection barriers typical of single-carrier devices used to probe organic semiconductors, a meaningful analysis using the Mott-Gurney law will become unachievable, because a square-law fit can no longer be achieved, resulting in the mobility being substantially underestimated. General criteria for when to expect deviations from the Mott-Gurney law when used for analysis of intrinsic semiconductors are discussed.

Dye-sensitized TiO2 can be used as the active layer of solar-cell devices without an additional hole-transporting material. In this architecture, holes are transported through the dye monolayer.

We measured the rate of hole hopping between dye molecules on titanium dioxide nanocrystals using cyclic voltammetry. Dyes commonly used in the field of dye sensitized solar cells exhibited efficient intermolecular charge transport, showing apparent diffusion coefficient values between 10−8 up to over 10−7 cm2 s−1 at room temperature. From temperature dependent measurements, we observed that hole transport across dye monolayers is a thermally activated process with Arrhenius activation energies between about 170 and 370 meV depending on the dye. Analysis of the data in terms of non-adiabatic Marcus theory of charge transfer enabled the estimation of the reorganization energy (740–1540 meV) and of an effective electronic coupling for the different systems. The measured reorganization energies show reasonable agreement with values obtained from density functional theory based calculations, validating our computational approach. Finally, we interpret the experimental and calculated data with reference to the chemical structure of the dyes and to the packing of the dyes on the surface of the TiO2 and suggest that delocalization of the HOMO and rigidity of the conjugated molecular structure result respectively in lower outer and inner sphere reorganization energies.

In this study, we report high performance organic solar cells with spray coated hole-injection and active layers. We were able to achieve high film quality, deduced from surface profilometry, atomic force microscopy and absorption measurements. With an automated ultrasonic spray coater we successfully deposit smooth and uniform PEDOT:PSS in optimum thicknesses of 40 nm and a mixture of P3HT and PCBM in thicknesses in the range 200–250 nm.

In this study, we report high performance organic solar cells with spray coated hole-transport and active layers. With optimized ink formulations we are able to deposit films with controlled thickness and very low surface roughness (

2D halide perovskites feature a versatile structure, which not only enables the fine-tuning of their optoelectronic properties but also makes them appealing as model systems to investigate the fundamental properties of hybrid perovskites. In this study, the authors analyze the changes in the optical absorption of 2D Dion-Jacobson mixed halide perovskite thin films (encapsulated) based on (PDMA)Pb(I0.5Br0.5)4 (PDMA: 1,4-phenylenedimethanammonium spacer) exposed to a constant illumination. It is demonstrated that these 2D mixed-halide perovskites undergo photo-induced phase segregation, where the pristine mixed-phase de-mixes into iodide-rich and bromide-rich phases (photo de-mixing). The de-mixed state is largely maintained in the dark at room temperature for several months, while at higher temperatures it shows complete reversibility to the mixed-phase in terms of optical and structural properties (dark re-mixing). The authors further investigate temperature-dependent absorption measurements under light to extract the photo de-mixed compositions and to map the photo-miscibility-gap. This work thereby reveals that reversible photo de-mixing occurs in Dion-Jacobson 2D hybrid perovskites and provides strategies to address the role of light in the thermodynamic properties of these materials., Advanced Energy Materials, 12 (26)