Search

In this paper, a complete Lab-on-Chip (LoC) ion imaging platform for analysing Ion-Selective Membranes (ISM) using CMOS ISFET arrays is presented. An array of 128 × 128 ISFET pixels is employed with each pixel featuring 4 transistors to bias the ISFET to a common drain amplifier. Column-level 2-step readout circuits are designed to compensate for array offset variations in a range of up to ±1 V. The chemical signal associated with a change in ionic concentration is stored and fed back to a programmable gain instrumentation amplifier for compensation and signal amplification through a global system feedback loop. This column-parallel signal pipeline also integrates an 8-bit single slope ADC and an 8-bit R-2R DAC to quantise the processed pixel output. Designed and fabricated in the TSMC 180 nm BCD process, the System-on-Chip (SoC) operates in real time with a maximum frame rate of 1000 fps, whilst occupying a silicon area of 2.3 mm × 4.5 mm. The readout platform features a high-speed digital system to perform system-level feedback compensation with a USB 3.0 interface for data streaming. With this platform we show the first reported analysis and characterisation of ISMs using an ISFETs array through capturing real-time high-speed spatio-temporal information at a resolution of 16 μm in 1000 fps, extracting time-response and sensitivity. This work paves the way of understanding the electrochemical response of ISMs, which are widely used in various biomedical applications.

Dengue is one of the most prevalent infectious diseases in the world. Rapid, accurate and scalable diagnostics are key to patient management and epidemiological surveillance of the dengue virus (DENV), however current technologies do not match required clinical sensitivity and specificity or rely on large laboratory equipment. In this work, we report the translation of our smartphone-connected handheld Lab-on-Chip (LoC) platform for the quantitative detection of two dengue serotypes. At its core, the approach relies on the combination of Complementary Metal-Oxide-Semiconductor (CMOS) microchip technology to integrate an array of 78 × 56 potentiometric sensors, and a label-free reverse-transcriptase loop mediated isothermal amplification (RT-LAMP) assay. The platform communicates to a smartphone app which synchronises results in real time with a secure cloud server hosted by Amazon Web Services (AWS) for epidemiological surveillance. The assay on our LoC platform (RT-eLAMP) was shown to match performance on a gold-standard fluorescence-based real-time instrument (RT-qLAMP) with synthetic DENV-1 and DENV-2 RNA and extracted RNA from 9 DENV-2 clinical isolates, achieving quantitative detection in under 15 min. To validate the portability of the platform and the geo-tagging capabilities, we led our study in the laboratories at Imperial College London, UK, and Kaohsiung Medical Hospital, Taiwan. This approach carries high potential for application in low resource settings at the point of care (PoC).

This work describes an array of 1024 ion-sensitive field-effect transistors (ISFETs) using sensor-learning techniques to perform multi-ion imaging for concurrent detection of potassium, sodium, calcium, and hydrogen. Analyte-specific ionophore membranes are deposited on the surface of the ISFET array chip, yielding pixels with quasi-Nernstian sensitivity to K+, Na+, or Ca2+. Uncoated pixels display pH sensitivity from the standard Si3N4 passivation layer. The platform is then trained by inducing a change in single-ion concentration and measuring the responses of all pixels. Sensor learning relies on offline training algorithms including k-means clustering and density-based spatial clustering of applications with noise to yield membrane mapping and sensitivity of each pixel to target electrolytes. We demonstrate multi-ion imaging with an average error of 3.7% (K+), 4.6% (Na+), and 1.8% (pH) for each ion, respectively, while Ca2+ incurs a larger error of 24.2% and hence is included to demonstrate versatility. We validate the platform with a brain dialysate fluid sample and demonstrate reading by comparing with a gold-standard spectrometry technique.

A novel microfluidic analysis platform is demonstrated for the real-time monitoring of traumatic brain injury (TBI) patients in intensive care. The system uses an on-chip array of Complementary Metal-Oxide-Semiconductor (CMOS) sensors implemented in an unmodified process to perform ion imaging. Specificity to several ionic species is achieved by depositing ion-selective membranes at the surface of the chip. Image processing techniques on the sensing array data enable the visualisation of the pattern of neurochemical changes caused by the evolving injury.

This demonstration presents a portable and low-power ISFET platform, powered by a solar panel battery system. A 32x32 ISFET array is connected to the portable platform using a custom cartridge, which interface with a Raspberry Pi that controls biasing, configuration and data acquisition, while displaying the results on a touchscreen. Inspired by classic videogame consoles, we present a GUI for screening and diagnosis which provides an intuitive experience for non-expert users, ultimately offering an end-to-end system for ISFET-based Point-of-Care diagnosis.