Search

Elucidating the structural variations of lignin during the pretreatment is very important for lignin valorization. Herein, poplar wood was pretreated with an integrated process, which was composed of AlCl

Deep eutectic solvents (DES) pretreatment is a promising approach to decrease “biomass recalcitrance” and boost the cellulose bioconversion as well as lignin valorization. In this study, a short-time DES pretreatment strategy was performed to enhance the production of high-yield fermentable sugars and tailored lignin nanoparticles (LNPs) from abaca. The glucose yield reached 92.4% under the optimal pretreatment condition (110 °C, 30 min), which was dramatically increased in comparison with that (9.5%) of control abaca. Simultaneously, nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques indicated that the removed and regenerated DES lignin fractions displayed depolymerized structures and have relatively low molecular weight with relatively homogeneous morphology and narrow size distribution. Transmission electron microscope (TEM) analysis indicated that these lignin fractions are LNPs and the size of the optimal LNPs fraction is ranged from 30 nm to 50 nm. Moreover, all the DES lignin exhibited excellent antioxidant activities as compared to the commercial antioxidant butylated hydroxytoluene (BHT), which can be used as a promising natural antioxidant in industry. In short, this study demonstrated that the short-time DES pretreatment will improve the enzymatic digestibility and facilitate the controllable production and valorization of LNPs from abaca biomass, which will further promote the economic and overall benefits of biorefinery.

Green fractionation and a comprehensive overview of lignin molecular structures during the DES (deep eutectic solvent) pretreatment are very important for lignin valorization and the whole biorefinery process. Herein, intractable woody biomass (poplar wood) was pretreated with five types of carboxylic-acid-based DESs (acetamide served as an HBA (hydrogen bond acceptor), propanedioic acid, tartaric acid, malic acid, glutaric acid, and succinic acid served as HBDs (hydrogen bond donors)) under the optimized pretreatment conditions. Results showed that the optimal delignification ratio was achieved for tartaric-acid-based DES at 140 °C for 20 min under microwave-assisted heating. Two-dimensional HSQC NMR data demonstrated that the isolated poplar DES lignin consisted mainly of β-β, β-O-4 (normal and acylated forms), β-5, and esterified p-hydroxybenzoates (PBs) in different contents. Especially, the contents of β-O-4 in the isolated DES lignin fractions varied based on the pretreatment temperature and different chemical compositions of the DES. The antioxidant activity (2,2-diphenyl-1-picrylhydrazyl, DPPH analysis), microstructure (scanning electron microscope, SEM), and molecular weights (gel permeation chromatography, GPC) of the DES lignin fractions demonstrated that the DES delignification promoted the rapid assembly of lignin nanoparticles (LNPs) and could yield homogeneous lignin (1.23 < PDI < 1.58) with controlled nanometer size (30–170 nm) and good antioxidant activity. This study will improve the knowledge of structural changes of lignin during the different carboxylic-acid-based DES pretreatments and maximize the lignin valorization.

To maximize the utilization of Abaca lignin in the current biorefinery, structural characteristics of native lignin from Abaca were firstly comprehensively investigated. Parallelly, effective delignification of Abaca was achieved by alkaline hydrogen peroxide (AHP) process, which facilitated the production of specialty paper in industry. The structural changes of lignin macromolecules during the AHP delignification were illustrated by comparing the structural differences of the released lignin fraction and corresponding native lignin, which were analyzed via the advanced analytical methods, such as 2D-HSQC NMR, 31P NMR, pyrolysis-GC/MS, and GPC techniques. It was found that Abaca lignin is a HGS-type lignin, which is overwhelmingly composed of β-O-4 linkages and abundant hydroxycinnamic acids (mainly p-coumaric acid). In addition, partial cleavage of β-O-4 linkages and p-coumarate in lignin occurred during the AHP delignification process. Meanwhile, AHP process also led to the elevation of H-type lignin units in AHPL. Considering that β-O-4 bond is vulnerable in the catalytic degradation process of lignin, the lignin with abundant β-O-4 linkages is beneficial to the downstream conversion of lignin into aromatic chemicals.

Elucidating the chemical and structural characteristics of hemicelluloses and lignin in the p-coumarate 3-hydroxylase (C3H) down-regulated poplar wood will be beneficial to the upstream gene validation and downstream biomass conversion of this kind of transgenic poplar. Herein, the representative hemicelluloses and lignin with unaltered structures were prepared from control (CK) and C3H down-regulated 84K poplars. Modern analytical techniques, such as 13C NMR, 2D-HSQC NMR, and gel chromatography (GPC), were performed to better delineate the structural changes of hemicelluloses and lignin caused by transgenesis. Results showed that both the hemicelluloses (H-CK and H-C3H) extracted from control and C3H down-regulated poplar wood have a chain backbone of (1→4)-β-D-Xylan with 4-O-Me-α-D-GlcpA as side chain, and the branch degree of the H-C3H is higher than that of H-CK. With regarding to the lignin macromolecules, NMR results demonstrated that the syringyl/guaiacyl (S/G) ratio and dominant substructure β-O-4 linkages in C3H down-regulated poplar were lower than those of control poplar wood. By contrast, native lignin from C3H down-regulated poplar wood exhibited higher contents of p-hydroxybenzoate (PB) and p-hydroxyphenyl (H) units. In short, C3H down-regulation resulted in the chemical and structural changes of the hemicelluloses and lignin in these poplar wood. The identified structures will facilitate the downstream utilization and applications of lignocellulosic materials in the biorefinery strategy. Furthermore, this study could provide some illuminating results for genetic breeding on the improvement of wood properties and efficient utilization of poplar wood.

The natural lignin macromolecule is structurally complex and heterogeneous polymers. Herein, to comprehend the dynamic structural characteristics of poplar (Populus tomentosa) lignin during the gro...

Due to its low cost and green nature, pretreatment of lignocelluloses using deep eutectic solvents (DESs) is a promising approach for dissociation of lignocelluloses and extraction of lignin. Howev...

A synergistic pretreatment that realizing effective fractionation and targeted valorization can guarantee the implementability to future biorefinery scenario. In the present study, a stepwise approach using hydrothermal and deep eutectic solvents (DES) pretreatment was developed to preferentially dissociate hemicelluloses and further remove lignin from poplar, while retaining a cellulose-rich substrate that can be easily digested via enzymatic saccharification to obtain glucose. Results showed that the hydrothermal filtrate is mainly composed of xylooligosaccharide (XOS), monosaccharides, byproducts, and xylan-type hemicelluloses, which have homogenous structures and uniform molecular weights distribution as well as excellent antioxidant activity. Subsequent DES pretreatment further removed the lignin barriers, leading to a remarkable increase in the saccharification efficiency from 15.72% to 96.33% under optimum conditions for enzymatic hydrolysis. In short, the integrated pretreatment is effective for dissociating and chemical conversion of poplar wood, which was reasonable to promote the frontier of highly available biorefinery.

Ethanol organosolv pretreatment is a green and effective deconstruction process for main components in lignocellulose biomass. Herein, balsa wood was firstly subjected to a modified ethanol/water solution (EWS) pretreatment with different Lewis acids catalysts (AlCl3, CuCl2, FeCl3) at 140-180 °C. The delignification ratios and structural characteristics of the dissociated lignin, enzymatic hydrolysis of cellulose in the pretreated substrates as well as the degradation products from hemicellulose during the pretreatment process were comprehensively investigated. Results showed that dissociation and depolymerization of lignin fragments was robust in AlCl3-catalyzed pretreatment than those by CuCl2 and FeCl3-catalyzed pretreatment. In detail, the results showed that the optimal delignification ratio and removal of the hemicelluloses occurred in AlCl3-catalyzed pretreatment. Moreover, the structural characterizations of lignin fractions by 2D-HSQC, 31P NMR and GPC also revealed that the obtained lignin has the advantages of small and homogeneous molecules as well as abundant functional groups. As a result of adequate removal of hemicellulose and lignin, the enzymatic digestibility of cellulose in the pretreated residue was significantly elevated. In short, the above findings are also in line with the concept of maximizing the utilization of bioresources, which will be beneficial for value-added applications of balsa wood in the biorefinery.

An aspirational pretreatment method for efficient fractionation and tailored valorization of large industrial biomass can ensure the realizability of sustainable biorefinery strategies. In this study, an ultrafast alkaline deep eutectic solvents (DES) pretreatment strategy was developed to efficiently extract the lignin nanoparticles and retain cellulose residues that could be readily enzymatic saccharified to obtain fermentative glucose for the bioenergy production from industrial xylose residue. Results showed that the DES pretreatment had excellent delignification performance and the regenerated DES lignin nanoparticles exhibited well-preserved structures and excellent antioxidant activity, as well as low molecular weights and relatively uniform size distribution, which could facilitate downstream catalytic degradation for production of chemicals and preparation of lignin-based materials. Under the optimal condition (DES pretreatment: 80 °C, 10 min; saccharification: 10 FPU/g, 5 wt%, 100 mg/g Tween 80), the glucose yield of 90.12% could be achieved, which was dramatically increased compared to raw materials.

In this study, feather was used as the source of protein and combined with copper and boron salts to prepare wood preservatives with nano-hydroxyapatite or nano-graphene oxide as nano-carriers. The treatability of preservative formulations, the changes of chemical structure, micromorphology, crystallinity, thermal properties and chemical composition of wood cell walls during the impregnation and decay experiment were investigated by retention rate of the preservative, Fourier transform infrared spectroscopy (FT-IR), scanning electronic microscopy-energy dispersive spectrometer (SEM-EDS), X-ray diffraction (XRD), thermoanalysis (TG), and confocal Raman microscopy (CRM) techniques. Results revealed that the preservatives (particularly with nano-carrier) successfully penetrated wood blocks, verifying the enhanced effectiveness of protein-based preservative with nano-carrier formulations. Decay experiment demonstrated that the protein-based wood preservative can remarkably improve the decay resistance of the treated wood samples, and it is an effective, environmentally friendly wood preservative. Further analysis of these three preservative groups confirmed the excellent function of nano-hydroxyapatite as a nano-carrier, which can promote the chelation of preservatives with higher content of effective preservatives.

Reducing the “biomass recalcitrance” and simultaneously improving the efficiency of deconstruction and conversion is vitally important in a biorefinery process. Herein, a microwave-assisted deep eutectic solvents (DES) pretreatment was developed to deconstruct the control and transgenic (C3H, HCT and C3H + HCT co-inhibition) poplars, and improve the lignin extractability and valorization. NMR and GPC results showed that native lignin (Double Enzymatic Lignin, DEL) in different poplars exhibited slightly different structural characteristics, affecting the subsequent lignin extractability and value-added applications. After two kinds of DES (ethylene glycol-based and glycerol-based DES) pretreatments, the yield of DES lignin was obviously increased to 45.38–53.09 % and 46.38–54.30 % in transgenic poplar woods as compared to control poplar wood (37.25 and 38.86 %). In addition, molecular weight, and abundances of different linkages (β-O-4, β-β, β-5, etc.) in the DES lignin fractions were significantly decreased, suggesting the microwave-assisted DES pretreatment has a strong deconstruction ability towards to poplar wood. Moreover, the rapid and efficient pretreatment facilitated the isolation of the lignin fractions from transgenic poplars, and the regenerated DES lignin fractions exhibited excellent antioxidant properties, which will lay the foundation for the lignin valorization. Furthermore, the enzymatic saccharification ratios of the DES pretreated substrates were significantly increased to 87.36–96.55 % in control and transgenic poplar woods, indicating that microwave-assisted DES pretreatment indeed boosted cellulose bioconversion. In short, the combination of genetic modification and DES pretreatment can significantly reduce the “biomass recalcitrance” and promote the biomass valorization.

In this study, lignin with fine structures and facile enzymatic saccharifying residue were successively dissociated based on the lignin-first biomass deconstruction strategy. In the lignin-first process, aldehyde-protected lignin fractions were firstly isolated by acid-catalyzed dioxane extraction in the presence of formaldehyde (FA) and acetaldehyde (AA) and then analyzed by advanced nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The optimized hydrogenolysis of the extracted lignin (LFA and LAA) resulted in a high yield (42.57% and 33.00%) of lignin monomers with high product selectivity (mainly 2,6-dimethoxy-4-propylphenol) (39.93% and 46.61%). Moreover, the cellulose-rich residues were saccharified into fermentable glucose for bioethanol production. The glucose yield of the substrate (RAA) reached to 75.12%, which was significantly higher than that (15.4%) of the substrate (RFA). In short, the lignin-first biomass deconstruction by adding AA is a promising and sustainable process for producing value-added products (energy and fine chemicals) from lignocellulosic biomass.