Search

Sampling programs for suspended sediment were carried out in the Usumacinta River and its tributary Grijalva River in Mexico during the years 2016 and 2017. Suspended sediment samples collected during these sampling programs were analyzed in the laboratory using a Rotating Annular Flume (RAF) fitted with a Particle Tracking Velocimetry (PTV) to obtain the 2D images of the suspended sediment particles as they were undergoing floc reconstruction, and subsequently using a glass settling column fitted with inline digital holography set up to obtain 3D holograms of the fully flocculated sediment particles. From these high-resolution hologram images, the fractal dimension of the flocculated sediment particles was obtained using the classical box-counting method and an improved Triangular box-counting method. The estimated fractal dimension of flocculated sediment, which is a measure of floc compactness and structure that control the settling velocity of flocculated sediment was used to validate two empirical models to estimate the fractal dimension in terms of the floc sizes of suspended sediments of these two rivers. It is shown in this study that the floc characteristic can be analyzed in laboratory experiments after floc reconstruction with the use of an RAF and it offers a viable alternative to the costly in-situ sampling that is often carried out in ocean research. The digital holography method employed in this research offers an efficient methodology to obtain the floc fractal dimension. Regarding the innovative aspects and new contribution to science, we can say that we have developed a laboratory protocol to test river waters to establish floc properties such as fractal dimensions of flocs in this research which will help to test river waters on a routine basis with manageable costs. We can also say that we have developed models to predict the relationship between floc fractal dimension and floc size, which did not exist before.

Fine sediment is a key driver of water quality degradation in rivers globally and improved knowledge of its source and transport is required to assess the efficacy of sediment control options and pollution abatement strategies. Here the transport characteristics (deposition, erosion and flocculation) of fine sediment were studied experimentally in an annular flume to provide parameters necessary to model fine sediment transport in the upper River Taw in southwest England. Deposition experiments were carried out using a sediment–water mixture in the flume and in-situ size distributions of sediment flocs were measured to assess flocculation and settling behavior of sediment. The influence of bed shear stress and bed consolidation were investigated in a series of erosion experiments. These data were used to calibrate and test a mathematical model of fine sediment transport in annular flumes (FLUME model) and the measured and modelled data were in good agreement. Transport parameters for cohesive sediments, such as the critical shear stresses for deposition and erosion as well as the particle density, porosity and settling velocity as a function of floc size were established. The density and settling velocity of the cohesive sediments were sensitive to the biological activity within the floc structure. Data from the flume experiments are necessary as input parameters to models such as RIVFLOC or SHETRAN that simulate fine sediment transport in the River Taw at the catchment scale and assess the efficacy of sediment control options and catchment management scenarios

Phosphorus (P) is often a limiting nutrient that leads to the eutrophication of aquatic systems. While dissolved P forms are the most bioavailable, the form, mobility, transport and fate of P are directly related to its association with fine-grained riverine sediment. Therefore, to implement successful P catchment management strategies it is important to understand the relative contribution of different sediment sources to P loads across the river continuum. While agricultural topsoil and, to a lesser extent, riverbed sediment are important sources of sediment-associated P, channel banks have been shown to be an important sediment source in some catchments. However, comparatively little is known about the P concentration and corresponding spatial variability in channel bank sediment and the associated implications for catchment management. The present study examines the spatial variability of P associated with channel bank profiles within a series of three nested catchments using both non-spatial and spatial statistical methods, where for the latter, a novel spatial approach was used to estimate the spatial averages and variances of P in channel bank sediment along the stream network. Channel bank P concentrations were compared to factors such as catchment scale, stream order, land use, bank exposure and location along the stream network. Concentrations of TP ranged between 129.6 and 1206.9 mg P kg−1 of which the water extractable P (WEP) content ranged from 0.01 to 0.12%. Stream order was found to influence TP concentrations, while land use and catchment scale provided only a moderate influence. This suggested that focussing channel bank sampling strategies at the largest catchment scale would capture key drivers of TP variability provided stream order is sufficiently represented. Whether the bank was had limited vegetation and was exposed and potentially eroding had a slight influence on TP variability in second-order stream banks in the larger of the two nested catchments. However, the slightly lower TP concentrations measured at these sites indicated that banks that are actually eroding may be contributing less TP than the total channel bank TP values measured across the catchments as a whole. The results of an explicitly spatial analysis demonstrated that local channel bank TP averages and TP variances vary along the stream network. Specifically, the most accurate spatial predictor of TP was local TP means with the use of ‘crow flies’ rather than stream network distances. Local TP variances were used to provide optimal designs for future channel bank TP sampling campaigns, given available resources. Throughout, both standard and outlier-resistant statistical analyses were applied to improve interpretation of the study findings.

In this paper, a novel modeling approach is applied to assess the unique transport characteristics of hydrophobic (bitumen containing) cohesive sediment for the Ells River, AB, Canada. The modeling offers a new way of treating the transport and fate of fine sediment in rivers and points to the importance of including a sediment entrapment process in the modeling of the Ells River sediment dynamics. The modeling approach involves combining two existing models (RIVFLOC and MOBED). Using fine sediment transport parameters derived from laboratory flume experiments (e.g., settling velocity of sediment as a function of floc size and the critical shear stresses for deposition) and the calculated flow field from the MOBED model (using field survey data such as, cross-sectional geometry, river slope, grain size of bed material, and discharge), the RIVFLOC model is used to predict the transport characteristics (including entrapment) of the hydrophobic Ells River sediment. The application of the connected RIVFLOC and MOBED models, demonstrated the unique hydrophobic sediment dynamics of the Ells River. The model showed no deposition (in the classical sense) of the hydrophobic sediment as the bed shear stresses, even at base flow, are well above the critical bed shear for deposition (flocculation is shown to occur, but its impact on settling is negligible given the high shear stresses). However, the model showed the possibility of fine sediment ingression into the river bed (interstitial voids) due to the entrapment process which is known to occur at bed shear stresses well above the critical shear stress for deposition. The salient features of RIVFLOC and MOBED models and their applications for understanding the transport and fate of unique hydrophobic fine sediments are presented. The models are shown to be useful for the understanding and projection of flow characteristics and sediment dynamics (including entrapment), and will be of benefit for the adaptive management of riverine monitoring programs given various flow scenarios including extreme events and climate change.

In this short communication, the erosion process of the fine, cohesive sediment collected from the upper River Taw in South West England was studied in a rotating annular flume located in the National Water Research Institute in Burlington, Ontario, Canada. This study is part of a research project that is underway to model the transport of fine sediment and the associated nutrients in that river system. The erosion experimental data show that the critical shear stress for erosion of the upper River Taw sediment is about 0.09 Pa and it did not depend on the age of sediment deposit. The eroded sediment was transported in a flocculated form and the agent of flocculation for the upper River Taw sediment may be due to the presence of fibrils from microorganisms and organic material in the system. The experimental data were analysed using a curve fitting approach of Krone and a mathematical model of cohesive sediment transport in rotating circular flumes developed by Krishnappan. The modelled and measured data were in good agreement. An evaluation of the physical significance of Krone’s fitting coefficients is presented. Variability of the fitting coefficients as a function of bed shear stress and age of sediment deposit indicate the key role these two factors play in the erosion process of fluvial cohesive sediment.

While cohesive sediment generally represents a small fraction (16 Pa), cohesive materials trapped within the gravel bed will be entrained and transported into the Glenmore Reservoir, where sediment-associated nutrients may pose treatment challenges to the drinking water supply.

Using Ells River, Alberta, Canada bed sediments, this study aims to determine (1) the erosion, transport, and deposition characteristics of cohesive bottom sediments, and (2) the influence of the microbial community in this regard. A 2-m annular flume was used to generate bed shear to assess cohesive sediment dynamics for eroded beds with consolidation/biostabilization periods of 1, 3, and 7 days. Additional optical particle sizing, image analysis, densitometry, and microbial analysis were employed to further the analysis with respect to bed erosion and eroded floc characteristics. Sediment dynamics can influence the benthic and planktonic community health within aquatic systems. The critical bed shear stress for erosion increased from 0.05 to 0.19 Pa (for 1- to 7-day runs). Consolidation (dry density) increased with time and depth and eroded biofilm biomass was observed to increase with time. The community structure of the eroded sediment did not change with time suggesting a stable well-established and highly selected community. Hydrocarbon-degrading bacteria were present within the microbial consortium. The sediment was highly hydrophobic (96 %) due to a high natural oil content which likely had a profound effect on sediment dynamics, flocculation, and sediment cohesion. Eroded sediment settled poorly, which will result in the long-range transport of associated contaminants. The Ells River possesses some unique properties which should be considered when assessing contaminant source, fate, and effect. The most significant of these are small floc size, the hydrophobicity of the sediment, and the biological community as these were found to be influential in both the erosion and flocculation processes. It is important that any management strategies and operational assessments of reclamation strategies that may have implication on river health incorporate the sediment compartments (SS and bed sediment), biology, and the energy dynamics within the system in order to better predict the downstream flux of sediments.

The lake levels in Lake Michigan-Huron have recently fallen to near historical lows, as has the elevation difference between Lake Michigan-Huron compared to Lake Erie. This decline in lake levels has the potential to cause detrimental impacts on the lake ecosystems, together with social and economic impacts on communities in the entire Great Lakes region. Results from past work suggest that morphological changes in the St Clair River, which is the only natural outlet for Lake Michigan-Huron, could be an appreciable factor in the recent trends of lake level decline. A key research question is whether bed erosion within the river has caused an increase in water conveyance, therefore, contributed to the falling lake level. In this paper, a numerical modeling approach with field data is used to investigate the possibility of sediment movement in the St Clair River and assess the likelihood of morphological change under the current flow regime. A two-dimensional numerical model was used to study flow structure, bed shear stress, and sediment mobility/armoring over a range of flow discharges. Boundary conditions for the numerical model were provided by detailed field measurements that included high-resolution bathymetry and three-dimensional flow velocities. The results indicate that, without considering other effects, under the current range of flow conditions, the shear stresses produced by the river flow are too low to transport most of the coarse bed sediment within the reach and are too low to cause substantial bed erosion or bed scour. However, the detailed maps of the bed show mobile bedforms in the upper St Clair River that are indicative of sediment transport. Relatively high shear stresses near a constriction at the upstream end of the river and at channel bends could cause local scour and deposition. Ship-induced propeller wake erosion also is a likely cause of sediment movement in the entire reach. Other factors that may promote sediment movement, such as ice cover and dredging in the lower river, require further investigation. Copyright © 2012 John Wiley & Sons, Ltd.

Four devices developed for measuring settling velocity distributions of combined sewer overflow (CSO) solids were applied to dry and wet weather flow samples from an urban area serviced by combined sewers (Welland, ON, Canada). The settling column-based methods (the Aston, Brombach and US Environmental Protection Agency columns) produced comparable results indicating minimal differences in settleability of dry and wet weather samples. The elutriation apparatus, which assessed settling velocities in a flowing medium, indicated higher settleabilities than the column methods. This was attributed to enhanced opportunities for particle coalescence in the flowing medium, which should better approximate actual sedimentation conditions. While the elutriation apparatus also indicated larger differences in settleabilities between dry and wet weather samples than the column methods, this difference was not statistically significant. Experimental distributions of particle settling velocities were approximated by a mathematical function, which was then used to estimate partial settling of total suspended solids (TSS) with settling velocities smaller than the clarifier overflow rate. The TSS removal target of 50%, which is applicable to CSOs in Ontario, could be met for overflow rates ranging from 4.7 to 6.8 m/h, for dry and wet weather flows, respectively, based on the average settling velocities measured. Experimental data collected in the study indicate that the design of CSO storage and settling facilities is affected, among other factors, by both the apparatus used to assess CSO settleability and the inter-event variability of CSO settling characteristics.

Purpose This research aims to investigate: (1) the evolutional sequence of erosion of cohesive sediments entering the Athabasca River, (2) the influence of consolidation/biostabilization time on bed sediment stability, and (3) the implication of these results on contaminant transport within the Athabasca River.

Polycyclic aromatic hydrocarbons (PAHs) originating from natural sources, and potentially from the Athabasca Oil Sands development, are of concern for the Athabasca River and Lake Athabasca delta ecosystems. In order to model the transport of fine sediments (and associated PAHs), it is important to describe the sediment dynamics within the river system. Flocs possess different settling characteristics compared to individual particles. A key aspect in modelling floc settling behaviour is the mathematical linkage of the floc density to floc size. In this paper, a rotating annular flume is used to determine the settling characteristics of Muskeg River (a tributary of the Athabasca River) sediments under different shear conditions. Simulations of the settling and flocculation behaviour of these sediments were used to calibrate a density vs. floc size model. A relationship of the parameters relating floc size and density with the fractal dimension F shows that as diameter increases flocs become weaker. Recommendations for the practical application of the model are further formulated in this paper. The deposition tests offer a quantitative measure of the relative amount of sediment that is likely to be transported through the river for given flow conditions.

Field and laboratory measurements of the transport of the suspended sediment from the Athabasca River near Hinton, Alberta, Canada are described. The objective of these measurements was to examine the influence of pulp mill effluent entering the river from a nearby pulp mill on suspended sediment. The results of the field measurement showed that the effluent had significant impact on the transport of the sediment. Specifically, the effluent increased the deposition rates of the sediment and caused a substantial reduction of sediment concentrations in reaches downstream of the effluent outfall. The reduction in sediment concentrations and the concomitant sediment loads can only be attributed to the pulp mill effluent as there were no abrupt changes in the hydraulic characteristics of the river in the reach of interest. These observations were confirmed by laboratory experiments that were carried out using a rotating circular flume located at the National Water Research Institute in Burlington, Ontario, Canada. The findings of this study have implications for modelling suspended sediment transport in rivers receiving bleached pulp mill effluents.

The state-of-the-art of sediment source identification is reviewed in this paper. Sediment “fingerprinting” techniques using different “fingerprint” properties were examined. With these techniques, it is possible to identify potential sources of sediment transported in river systems. Such knowledge is useful for implementing sediment control strategies to limit sediment production from upland areas in a watershed as well as for developing guidelines for land use practices to minimize adverse impacts on surface and ground water resources in agricultural watersheds. Examples of sediment source identification techniques that were carried out in agricultural watersheds in different parts of the world were also included in the present review.

The effective design of treatment processes for combined sewer overflows (CSOs) requires understanding of the CSO characteristics and treatability. Environment Canada partnered with four municipalities to evaluate water quality and treatability of wet- and dry-weather flows at local sewage or CSO treatment facilities. Chemical characterization of the samples indicates that the municipal sewage at all of the sites is of relatively weak strength, with several differences between the water quality data for dry-weather and wet-weather flows (assumed to represent CSOs). Hydraulic separation of constituents with an elutriation apparatus illustrated the removals that can be expected with conventional settling techniques and differences in settling of various constituents.

Erosion experiments were conducted in an annular flume to determine the effect of bed age and shear stress on the particle morphology (fractal dimensions D, D(1), and D(k)) of eroded cohesive river sediment. Sediment beds were deposited under low shear and left to consolidate for one, two and seven days. Fractal data and photomicrographs show particle morphology changed with shear stress and bed age. During the one-day experiment, flocs were highly branched and particle geometry became more complex with increasing shear. Microflocs present in suspension at low shear, formed larger more loosely bound flocs at moderate shear due to flocculation. At higher shear, larger flocs were less prevalent due to particle breakup. As bed age increased, less sediment was eroded and particles appeared less porous and more angular in shape for a given shear stress. Changes in floc morphology and eroded sediment mass at various shear stresses may be related to bed age-associated biostabilization of bed deposits.

Increased construction activity and associated receiving water concerns in the Greater Toronto Area has prompted this study to advance our knowledge on cohesive sediment transport processes in rivers and lake environments. Flow characteristics in a rotating circular flume at the National Water Research Institute (NWRI), Burlington, Ontario were studied using a computational fluid dynamics (CFD) model. The objective of this study was to use a CFD model to predict the complex 3D turbulent flow characteristics, including the tangential flow velocity distribution, turbulent secon- dary flow circulation patterns, and the bed shear stress distributions. The numerical model was calibrated using experi- mental data collected using a Laser Doppler Anemometer for velocity profiles and measurements obtained by a Preston tube for bed shear stress distributions. Tangential velocity profiles and bed shear velocity distributions across the rotating circular flume were used to evaluate the accuracy of the model predictions. When compared with experimental smooth bed shear stress data, the model performed reasonably well for the range of flume speeds examined. The calibrated CFD model was then used for simulating a series of 210 scenarios using varying ring operating speeds over a range of flow depths and bed roughness heights. The numerical simulation results were then used to study the complex 3D turbulent flow conditions in the circular flume at NWRI, including velocity profiles, turbulence characteristics of flow and bed shear stress distributions.

The Mackenzie River has several anomalous deep scour holes in a number of river channels in its delta. Proposed gas pipeline crossings have renewed interest in studying the stability of these scour holes. The main goal of this research project was to study flow velocity and bed shear stress distributions for a 30 m deep hole in the East Channel of the Mackenzie Delta as a first step toward assessing the stability of the scour hole and the risk of its migration during various flow conditions. In this study, a three-dimensional (3D) finite element flow model, FLUENT, using the renormalization group (RNG) k-ε turbulence model (where k is the turbulent kinetic energy and ε is the turbulence dissipation rate) was set up for the scour hole and calibrated using detailed measurements of 3D flow velocities, obtained with an acoustic doppler current profiler. The numerical model was then applied to predict flow velocity and bed shear stress distributions in and around the scour hole for three flow conditions (720, 1000, and 1400 m3/s). Results indicate that two vortices are formed in the river elbow above the scour hole. As the flow rate changed, the sizes of the vortices varied. The region upstream of the hole experienced the greatest magnitudes of bed shear stress.Key words: computational fluid dynamics, finite element, bed shear stress, deep hole, flow reversal.

An overview of cohesive sediment transport processes is given in this paper, and a mass-balance equation that is commonly used to treat cohesive sediment transport is reviewed. The equation highlights transport parameters and processes that are important for modelling the transport of cohesive sediment. The flocculation mechanism that distinguishes cohesive sediment from its noncohesive counterpart is elaborated using a laboratory study that was carried out in a rotating circular flume using sediments from Hay River, Northwest Territories, Canada. A mathematical model of flocculation suitable for predicting flocculation of sediment in rotating circular flumes is reviewed. Other cohesive sediment transport processes such as erosion and deposition processes at the sediment-water interface, entrapment of fines in gravel beds, consolidation, fluid mud, and fluidization due to wave action are reviewed. Additional challenges and knowledge gaps that exist in the area of cohesive sediment transport are identified. Key words: cohesive sediment, flocculation, mathematical modelling of flocculation, rotating circular flume, erosion, deposition, fine sediment entrapment, fluid mud, consolidation, fluidization, waves.

The erosion, transport and fate of sediments and associated contaminants are known to be influenced by both particle characteristics and the flow dynamics imparted onto the sediment. The influential role of bitumen containing hydrophobic sediments and the microbial community on sediment dynamics are however less understood. This study links an experimental evaluation of sediment erosion with measured sediment-associated contaminant concentrations and microbial community analysis to provide an estimate of the potential for sediment to control the erosion, transport and fate of contaminants. Specifically the paper addresses the unique behaviour of hydrophobic sediments and the role that the microbial community associated with hydrophobic sediment may play in the transport of contaminated sediment. Results demonstrate that the hydrophobic cohesive sediment demonstrates unique transport and particle characteristics (poor settling and small floc size). Biofilms were observed to increase with consolidation/biostabilization times and generated a unique microbial consortium relative to the eroded flocs. Natural oil associated with the flocs appeared to be preferentially associated with microbial derived extracellular polymeric substances. While PAHs and naphthenic acid increased with increasing shear (indicative of increasing loads), they tended to decrease with consolidation/biostabilization (CB) time at similar shears suggesting a chemical and/or biological degradation. PAH and napthenic acid degrading microbes decreased with time as well, which may suggest that there was a reduced pool of PAHs and naphthenic acids available resulting in their die off. This study emphasizes the importance that any management strategies and operational assessments for the protection of human and aquatic health incorporate the sediment (suspended and bed sediment) and biological (biofilm) compartments and the energy dynamics within the system in order to better predict contaminant transport.

An in situ erosion flume was used to measure the stability of sediment deposits in Hamilton Harbour, Ontario, Canada. The flume consists of a rectangular duct with an opening at the bottom. A submerged pump attached to the downstream end of the flume circulates the ambient water through the flume, thereby generating turbulent shear flows inside the flume. When the flume rests on a sediment deposit, the exposed part of the sediment deposit is subjected to the flow shear stress. By applying a continually increasing flow shear stress on the sediment deposit and by measuring the amount of sediment erosion, it is possible to assess the erosional stability of the sediment deposits. An under water video camera was mounted on the flume to get visual images of the sediment erosion process. The flume was used at two sites in the Harbour. The erosional resistances measured by the flume for the two sites were different. Measurement of dry density of the sediment deposits using an ultrasonic device was carried out to explain the differences in the stability of sediment deposits from the two sites.

An elutriation apparatus was proposed for testing the settleability of combined sewer outflows (CSOs) and applied to 12 CSO samples. In this apparatus, solids settling is measured under dynamic conditions created by flow through a series of settling chambers of varying diameters and upward flow velocities. Such a procedure reproduces better turbulent settling in CSO tanks than the conventional settling columns, and facilitates testing coagulant additions under dynamic conditions. Among the limitations, one could name the relatively large size of the apparatus and samples (60 L), and inadequate handling of floatables. Settleability results obtained for the elutriation apparatus and a conventional settling column indicate large inter-event variation in CSO settleability. Under such circumstances, settling tanks need to be designed for “average” conditions and, within some limits, the differences in test results produced by various settleability testing apparatuses and procedures may be acceptable. Further development of the elutriation apparatus is under way, focusing on reducing flow velocities in the tubing connecting settling chambers and reducing the number of settling chambers employed. The first measure would reduce the risk of floc breakage in the connecting tubing and the second one would reduce the required sample size.

The performance of a combined sewer overflow (CSO) storage/treatment facility in North Toronto, Ont., Canada, was investigated by conjunctive numerical and physical (hydraulic) modeling. The main objectives of the study were to (1) assess the feasibility of increasing the hydraulic loading of the CSO facility without bypassing; and (2) establish a verified numerical model of the facility for future work. The numerical model [a commercial computational fluid dynamics (CFD), PHOENICS] was validated and verified using results from a hydraulic scale model (1:11.6). The results obtained show that the CFD model can simulate hydraulic conditions in the facility well, as demonstrated by accurate reproduction of the filling rate, water levels at various locations, flow velocities in feed pipes, and overflows from the inflow channel. Numerical simulations identified excessive local head losses and helped select structural changes to reduce such losses. The analysis of the facility showed that with respect to hydrau...

The use of predictive models for the understanding and management of sediment and contaminant transport generally requires knowledge of particle size and settling velocity. Particle size is often obtained by direct measurements, and the settling velocities are usually predicted using the Stokes' law (or a modification thereof) for single-grained spherical particles. Such measurements and estimates are not satisfactory measures for cohesive sediments, which exist as agglomerated particles called flocs and whose behaviour is significantly different from that of the single-grained particles. Direct measurement of settling velocity and size using optical methods in settling columns has also been employed to improve these predictions; however, the subjectivity in determining which particles are in focus results in unreliable size data. An out-of-focus particle will generally possess a larger size than in reality. This paper evaluates a laser-assisted particle sizing/settling velocity determination technique's ability to eliminate the subjectivity and improve particle-sizing accuracy during settling column experiments. Although the diffraction of light by the translucent standard beads (used for evaluating the technique's accuracy for determining particle size) posed a problem, the results suggest that this technique has potential for assisting researchers to obtain the most accurate settling particle size data possible. Copyright © 2005 John Wiley & Sons, Ltd.

An elutriation apparatus has been proposed for determining the settling velocity distributions of suspended solids in combined sewer overflows (CSOs). The apparatus consisted of a series of interconnected cylindrical settling chambers, through which the sample was drawn using a peristaltic pump attached to the outlet of the last settling chamber. Since the diameters of the cylinders were progressively increasing, sediment with different settling velocities settled in different cylinders. By measuring the amount of sediment in each cylinder, the settling velocity distribution was deduced. The apparatus was tested using samples from a CSO outfall in Hamilton, Ontario, Canada. The test results showed that the apparatus performed well for determining settling characteristics of suspended solids and chemical distribution in different settling fractions. The effectiveness of polymer addition to enhance flocculation and settling of CSOs was also tested in this apparatus. The elutriation apparatus proposed here offers several advantages over the traditional methods (i.e., settling columns) of measurements of settling velocity distributions. The main advantage is its ability to measure the distributions under dynamic conditions, i.e., in the presence of flow. Consequently, the elutriation apparatus reproduces flow conditions in actual settling tanks better than conventional settling columns.

Erosion characteristics of fine sediment deposits were studied experimentally using a rotating circular flume in the laboratory. The influence of the rate of application of bed shear stress and the structure of sediment beds was investigated. When the shear stress was applied suddenly on a bed formed by placing a thick slurry of kaolin in the flume, the concentration of the eroded sediment first increased to reach a maximum value, and then it started to decrease and finally attained a steady state value that was significantly lower than the maximum concentration (the steady state concentration value was one third of the maximum concentration value). When the shear stress was applied gradually, the behaviour was similar, but the difference between the values of the maximum concentration and steady state concentration was very small (

Distributions of bed shear stress across the width of a rotating circular flume with smooth and rough bed surfaces were obtained by measurement and model prediction. Results with flows over smooth beds showed that the flow in the central part may be considered to be two-dimensional and that effects of flow depth over the operating range of the flume are minor for flow depths not exceeding 0.14 m. For rough beds, the bed shear stress distributions were found to be skewed toward the inner wall. This can be corrected if a compensating roughness is added to the bottom of the ring. Such measures are also effective for flumes with smooth beds. Measured bed shear stress distributions agreed well with the predicted distributions for smooth beds and reasonably well for rough beds. The modified Preston tube, for measurement of bed shear stress in flows over rough beds, was found to give promising results. Further tests are required to completely define the uncertainty in bed shear stress measurements made with this instrument.

This paper describes depositional properties of the fine portion (D

A large volume sample of river-bed cohesive sediment and water from Hay River, Northwest Territories, Canada was collected during a spring field program in 2000 as part of a study on under-ice movement of sediment just before breakup. Controlled laboratory experiments were subsequently conducted on the Hay River water/sediments in a rotating annular flume at Burlington, Ontario, Canada to better understand the deposition and erosion processes of cohesive sediment transport. The deposition experiments in the rotating flume confirmed that the Hay River sediment is cohesive and the critical shear stress for deposition and the rates of deposition are a function of bed shear stress and the initial concentration of the sediment in suspension. The erosion experiments provided quantitative data on the critical shear stress for erosion and the rates of erosion as a function of bed shear stress and the age of the sediment deposit. The erosion experiments also indicated that the growth of the biofilm had an influence on the erosion characteristics of the Hay River sediment. Based on the data from the rotating circular flume experiments, a modelling strategy is proposed for calculating the under-ice transport of the cohesive sediments in the Hay River.

A new model to predict the transport characteristics of suspended sediment from an on-stream stormwater management pond is presented. It is based on Krishnappan's model of flocculated settling in still water, which was extended to dynamic conditions and verified by experiments with stormwater pond sediment in a laboratory rotating flume. The model was derived from first principles, but some input parameters, such as floc properties, had to be obtained by calibration, and input parameters describing flow field properties were obtained from a kappa-epsilon turbulence model. Simulated suspended concentrations vs. time and the size distribution of the flocculated sediment, produced with the calibrated model, agreed well with flume measurements.

Experiments on the erosion of a bed of kaolinite were carried out in a rotating circular flume. Each experiment was carried out using the stratified bed which resulted from the previous experiment. Changes in suspended sediment concentrations during the experiments were explained by the history of the deposition. The sequence of experiments showed how the rate of erosion and the amount eroded reflected the structure of the bed and that of the individual flocs which created it. Results suggest that modelling of sediment/contaminant transport needs to account for the manner in which deposition took place.

Rolled Erosion Control Products (RECPs) have proven to be successful in reinforcing vegetative channel lining systems and improving their performance in Erosion and Sediment Transport Control (ESTC). Laboratory experiments and numerical simulation performed in the present study have provided a significant step towards: (1) identification of critical processes and effective mechanisms through which RECPs control and reduce erosion and sediment transport; (2) identification of influential index physical, mechanical and hydraulic properties of RECPs with respect to their ESTC performance; (3) investigation of the applicability of existing hydraulic models of turbulent shear flows over wavy, permeable and moveable boundaries to predict the kinematics and dynamics of flow in open-channels lined with RECPs; and (4) modification of the design approach for RECPs, in light of the new findings in this study.

The deposition and floc formation of fine sediment from Port Stanley harbour were investigated using a rotating circular flume. Seasonal effects, storage time and shear stress were varied. Biological activity was monitored as an aid to explain the results. Sample storage in the flume resulted in increased flocculation for the two fines samples. A sample with a higher percentage of silt did not flocculate to the same extent as the finer samples. Flocculation was also influenced by the presence of bacteria; however further investigation is required to determine their relative importance compared to the presence of fines.

Erosion tests were run on soft cohesive sediment beds freshly deposited from a concentrated slurry, in a large rotating annular flume. A total of seven tests were carried out with the bed age varying between 1.8 days and 18.9 days. A surface type erosion was observed for the applied shear stress range (0.1-1 Pa). Following the increase in the water flow, the erosion rate increases quickly to a peak value and then drops off to approximately zero. The eroded depth was less than 8 mm for all beds, but the resistance to erosion at a given depth and for a given bed structure increased with increasing bed age. This phenomenon was attributed to thixotropy. The erosional strength of a given sediment layer is found to be one order of magnitude lower than its undrained and drained mechanical shear strengths measured with innovative testing methods. Hypotheses are given to explain that difference. However, at constant density and soil-water chemistry, the erosional and mechanical strengths seem to be affected by the same factors, such as bed age, structure, and temperature.

The use of tile drains for subsurface drainage in agricultural watersheds has created concern for the delivery of sediment to receiving waters and potential undesirable effects on surface and subsurface water quality. In this study, transport characteristics of sediment from tile drains in an agricultural watershed of the Thames River, near Kintore, Ontario, Canada were tested in a 5 m diameter, rotating circular flume located at the National Water Research Institute in Burlington, Ontario. Tile drain sediments were collected and mixed with river water at different speeds in the flume to study transport processes such as deposition, erosion and flocculation as a function of bed shear stress. During deposition and erosion experiments, water samples were collected to determine changes in the concentrations of cations, anions and dissolved organic carbon. The results show that tile drain sediments have a tendency to flocculate when subjected to a range of shear stresses. The median diameter (D50) of the floc size distribution reached a maximum value at a shear stress of 0.169 Nm−2 which can be considered an optimum shear stress for flocculation for this sediment. The critical shear stress at which all of the initially suspended sediment deposited to the flume bed was measured as 0.056 Nm−2. The pH and cation concentrations remained relatively constant during erosion and deposition experiments. Anion concentrations were more variable, most likely due to the presence of bacteria which could have also played a role in the flocculation mechanism of tile drain sediment.

Unusually deep scour holes in distributary channels of the Mackenzie Delta are of concern for oil and gas resource development, particularly with respect to buried pipeline crossings. Surveys of one such hole, carried out in 1985 and 1992, indicated vertical stability and slight lateral movement. The present study examines how the hole may have changed by the mid-2000s and documents the complex local velocity field and related bed material properties. Small discrepancies between isobaths of different years suggest a dynamic stability that involves short-term fluctuations in erosion and deposition. This suggestion was corroborated by detailed measurements of the highly three-dimensional velocity field, which revealed major eddy structures and flow reversals that help maintain sizeable velocity magnitudes despite low mean velocities. The composition of the bed material suggests cohesive behaviour, but the literature indicates a range of critical shear stresses that spans two orders of magnitude. The more probable lower end of this range is consistent with the observed dynamic stability of the scour hole.

A rotating flume installed at the National Water Research Institute in Burlington, Ontario, Canada to undertake basic research on cohesive sediment dynamics is described. The flume is 5.0 m in mean diameter, 0.30 m in width, and 0.30 m in depth. An annular cover plate (ring), which can be transversed in the vertical direction, fits inside the flume with a radial clearance of 1.5 mm on either side and makes contact with the water surface. The flume and the ring can be rotated independently at speeds ranging from 0 to 3 rpm. The flume is equipped with a laser Doppler anemometer, a laser particle‐size analyzer and a Preston tube. A set of performance tests carried out in this flume indicate that generation of a nearly two‐dimensional flow field is possible if both the flume and the ring are rotated simultaneously in opposite directions. Flows generated by keeping the flume stationary and rotating only the ring were found to contain a strong secondary circulation cell and a large variation of bed shear stress...

Runoff from agricultural watersheds can carry a number of agricultural pollutants and pathogens; often associated with the sediment fraction. Deposition of this sediment can impact water quality and the ecology of the river, and the re-suspension of such sediment can become sources of contamination for reaches downstream. In this paper a modelling framework to predict sediment and associated microbial erosion, transport and deposition is proposed for the South Nation River, Ontario, Canada. The modelling framework is based on empirical relationships (deposition and re-suspension fluxes), derived from laboratory experiments in a rotating circular flume using sediment collected from the river bed. The bed shear stress governing the deposition and re-suspension processes in the stream was predicted using a one dimensional mobile boundary flow model called MOBED. Counts of live bacteria associated with the suspended and bed sediments were used in conjunction with measured suspended sediment concentration at an upstream section to allow for the estimation of sediment associated microbial erosion, transport and deposition within the modelled river reach. Results suggest that the South Nation River is dominated by deposition periods with erosion only occurring at flows above approximately 250 m(3) s(-1) (above this threshold, all sediment (suspended and eroded) with associated bacteria are transported through the modelled reach). As microbes are often associated with sediments, and can survive for extended periods of time, the river bed is shown to be a possible source of pathogenic organisms for erosion and transport downstream during large storm events. It is clear that, shear levels, bacteria concentrations and suspended sediment are interrelated requiring that these parameters be studied together in order to understand aquatic microbial dynamics. It is important that any management strategies and operational assessments for the protection of human and aquatic health incorporate the sediment compartments (suspended and bed sediment) and the energy dynamics within the system in order to better predict the concentration of indicator organism.

A fully coupled, one‐dimensional river model, capable of predicting sediment‐transport and bed‐level changes under unsteady flow conditions is described. The governing equations for mass and momentum balance of sediment‐water mixture under unsteady flow conditions in natural rivers with irregular geometries, are solved simultaneously using the Preissmann four‐point linear implicit scheme with weighting factors for space and time coordinates. The resulting system of algebraic equations is solved using a solution procedure that bridges upstream and downstream boundary nodal values by successive substitutions. The friction slope is expressed in a consistent form that allows the consideration of the changing alluvial roughness effect. The system of governing equations is explicitly coupled by introducing the term representing the rate of change of bed level. The fully coupled unsteady mobile boundary flow model (FCM) is applied to the classical problem of sediment deposition upstream of a dam with an arbitrar...

The fine sediment fraction, usually

Traditional CSO storage facilities can be environmentally upgraded by optimising their hydraulics and implementing chemically aided settling. In the case study presented for the North Toronto CSO facility, a number of structural measures serving to enhance the facility treatment rate and inducing favourable settling conditions in the settling basins were addressed by means of physical and computer modelling. A physical scale model was effective for establishing the hydraulic performance of the facility (flow rates, water levels, and changes in these parameters) and verifying a CFD model. The CFD model simulated well the hydraulic phenomena in the facility and will be used in the next study stage for particle tracking. With respect to chemically aided settling, the settleability of CSOs can be assessed well by elutriation testing. The choice of a coagulant/flocculant depends on the characteristics of the wastewater treated, including pH, dissolved organic matter contents and characteristics, and temperature. Jar testing offers the best way for selecting the most suitable chemical and its dosage. Finally, the solids removals in excess of those required by a provincial (Ontario) CSO control directive (primary treatment equivalency) were achieved at the facility studied with flow-proportional polymer dosing of 6–8 mg/L and the surface load rates of 15 m/h. Further refinements of settling conditions in the facility (by flow conditioning baffles), dosing (switching to solids flux proportional dosing) and higher surface loading rates are planned and will be assessed by both CFD modelling and field observations.

Solution methods to solve the unsteady flow equations are reviewed in this article. The basis of the method of characteristics is outlined. Some of the commonly used finite difference schemes are reviewed. A detailed description of an unsteady flow model called MOBED is given to highlight the various assumptions and simplifications that are involved in the development of an unsteady flow model. Testing of the model using a laboratory data set measured by Treske is described. Such a data set can serve as a benchmark data for the testing of unsteady flow models. Integral form of governing equations and their properties are introduced. High-resolution conservative finite-volume schemes for modeling flows with discontinuities are briefly discussed. Examples of numerical solutions using a robust one-dimensional upwind finite-volume code are presented. Keywords: conservative equations; discontinuous solutions; equations of Saint Venant; explicit methods; implicit methods; method of characteristics; open-channel flow; unsteady flow; TVD schemes; unsteady flow; upwind schemes

Fractal dimensions of particle populations of cohesive sediment were examined during deposition experiments in an annular flume at four conditions of steady-state flow (0.058, 0.123, 0.212 and 0.323Pa). Light microscopy and an image analysis system were used to determine area, longest axis and perimeter of suspended solids. Four fractal dimensions (D, D(1), D(2), D(k)) were calculated from the slopes of regression lines of the relevant variables on double log plots. The fractal dimension D, which relates the projected area (A) to the perimeter (P) of the particle (P proportional, variant A(D/2)), increased from 1.25+/-0.005 at a shear stress of 0.058Pa to a maximum of 1.36+/-0.003 at 0.121Pa then decreased to 1.34+/-0.001 at 0.323Pa. The change in D indicated that particle boundaries became more convoluted and the shape of larger particles was more irregular at higher levels of shear stress. At the highest shear stress, the observed decrease in D resulted from floc breakage due to increased particle collisions. The fractal dimension D(1), which relates the longest axis (l) to the perimeter of the particle (P proportional to l(D1)), increased from 1.00+/-0.006 at a shear stress of 0.058Pa to a maximum of 1.25+/-0.003 at 0.325Pa. The fractal dimension D(2), which relates the longest axis with the projected area of the particle (A proportional to l(D(2)), increased from 1.35+/-0.014 at a shear stress of 0.058Pa to a maximum of 1.81+/-0.005 at 0.323Pa. The observed increases in D(1) and D(2) indicate that particles became more elongated with increasing shear stress. Values of the fractal dimension D(k), resulting from the Korcak's empirical law for particle population, decreased from 3.68+/-0.002 at a shear stress of 0.058Pa to 1.33+/-0.001 at 0.323Pa and indicate that the particle size distribution changed from a population of similar sized particles at low shear to larger flocculated particles at higher levels of shear. The results show that small particle clusters (micro-flocs) are the formational units of larger flocs in the water column and the stability of larger flocs is a function of the shear stress at steady state.

A field-scale no-till corn plot (120 m x 90 m) located on a tile drained silt loam soil near Kintore, Ontario was irrigated with 2.5 cm of water over a 3 h period to examine the effects of irrigation on tile sediment transport in a headwater stream. Flow characteristics and the composition, concentration and size distribution of suspended solids were measured at the tile outlet, an upstream reference site and three sites located downstream of the tile drain. Results show that tile sediments at the study site are fine-grained (D50 approximately 5.0 microm) and consist primarily of quartz, anorthite/albite, dolomite and calcite. Sediment concentrations in tile effluent increased from 8 to 57 mg L(-1) after 1.5 h of irrigation and reached a maximum of 72 mg L(-1). The sediment yield from the tile drain for the irrigation event was 4.6 kg ha(-1). An unsteady, mobile boundary flow model (MOBED) was used to predict flow characteristics in the stream. According to the MOBED model, bed shear stress in the stream was approximately 6 N m(-2). This value is significantly greater than the critical shear stress for complete suspension of 1 N m(-2) for tile sediments as determined from laboratory experiments using a rotating circular flume. Grain size distributions of suspended solids in the stream were close to the dispersed size distribution because of the high shear stress in the receiving stream.

Three seasonal surveys of suspended solids were carried out in an on-stream stormwater management pond, by means of a submersible laser particle size analyser. Size distributions were measured at up to 17 points in the pond, and water samples collected at the same locations were analysed for primary particles aggregated in flocs. Observed suspended solids were mostly composed of flocs, with maximum sizes ranging from 30 to 212 μm for winter and summer surveys, respectively. Using a relationship defining the floc density as a function of floc size and Stokes' equation for settling, an empirical relationship expressing the floc fall velocity as a function of floc size was produced. This relationship indicates that naturally formed flocs in the size range from 5 to 15 μm would settle faster than both smaller primary particles of higher density, and somewhat larger flocs of lower density, which are however susceptible to break up by turbulence.

Size distributions of suspended sediment particles under low flow conditions in the Fraser River were measured using a submersible laser instrument. By comparing the in situ size distribution measured using this instrument with the size distribution of primary particles (measured by collecting sediment samples and analyzing them for size distribution after dispersing the particles by ultrasonic vibration), it was concluded that suspended sediment particles in the Fraser River downstream of pulp mill effluent outfalls are transported as agglomerations of particles (flocs) rather than as individual particles. Flocculation of river sediments in estuaries has been investigated in earlier studies, which show that saltwater intrusion contributes to the flocculation mechanism. Freshwater flocculation, such as the one observed in the present study, also has been reported in the literature, and it is attributed to the presence of organic materials and other contaminants from industrial and sewage treatment plant effluents. This paper describes the details of the submersible laser instrument and its use in the Fraser River, British Columbia, Canada.