Search

Dithiine linkage formation via a dynamic and self-correcting nucleophilic aromatic substitution reaction enables the de novo synthesis of a porous thianthrene-based two-dimensional covalent organic framework (COF). For the first time, this organo-sulfur moiety is integrated as a structural building block into a crystalline layered COF. The structure of the new material deviates from the typical planar interlayer π-stacking of the COF to form undulated layers caused by bending along the C–S–C bridge, without loss of aromaticity and crystallinity of the overall COF structure. Comprehensive experimental and theoretical investigations of the COF and a model compound, featuring the thianthrene moiety, suggest partial delocalization of sulfur lone pair electrons over the aromatic backbone of the COF decreasing the band gap and promoting redox activity. Postsynthetic sulfurization allows for direct covalent attachment of polysulfides to the carbon backbone of the framework to afford a molecular-designed cathode material for lithium–sulfur (Li–S) batteries with a minimized polysulfide shuttle. The fabricated coin cell delivers nearly 77% of the initial capacity even after 500 charge–discharge cycles at 500 mA/g current density. This novel sulfur linkage in COF chemistry is an ideal structural motif for designing model materials for studying advanced electrode materials for Li–S batteries on a molecular level.

This review critically summarizes nanoporous MOFs and their hybrids/derivatives for oil–water application in the form of filtration materials, absorbents and adsorbents including their recent progress in synthesis, design, and critical challenges.

The conversion of nitrogen to ammonia offers a sustainable and environmentally friendly approach for producing precursors for fertilizers and efficient energy carriers. Owing to the large energy density and significant gravimetric hydrogen content, NH

A general problem when designing functional nanomaterials for energy storage is the lack of control over the stability and reactivity of metastable phases. Using the high-capacity hydrogen storage candidate LiAlH4 as an exemplar, we demonstrate an alternative approach to the thermodynamic stabilization of metastable metal hydrides by coordination to nitrogen binding sites within the nanopores of N-doped CMK-3 carbon (NCMK-3). The resulting LiAlH4@NCMK-3 material releases H2 at temperatures as low as 126 °C with full decomposition below 240 °C, bypassing the usual Li3AlH6 intermediate observed in bulk. Moreover, >80% of LiAlH4 can be regenerated under 100 MPa H2, a feat previously thought to be impossible. Nitrogen sites are critical to these improvements, as no reversibility is observed with undoped CMK-3. Density functional theory predicts a drastically reduced Al-H bond dissociation energy and supports the observed change in the reaction pathway. The calculations also provide a rationale for the solid-state reversibility, which derives from the combined effects of nanoconfinement, Li adatom formation, and charge redistribution between the metal hydride and the host.

In the context of the growing hydrogen (H2) economy, the demand for H2 storage materials is high, and metal borohydrides are of particular interest. Magnesium borohydride, Mg(BH4)2, has one of the ...

Many engineering technologies such as electronic cooling and thermal desalination exemplify the enhancement of evaporation and boiling heat transfer by surface modification. Nevertheless, the core parameters of heat transfer such as critical heat flux and heat transfer coefficient are associated with surface wettability and morphology. Herein, for the first time, a metal–organic framework (MOF) film, viz. HKUST-1, was integrated into a metallic woven mesh (macroporous support) for enhancing liquid rewetting and capillary-driven evaporation and boiling heat transfer. Compared to bare copper mesh, this architecture was found to significantly increase the critical heat flux by 205% and the heat transfer coefficient by 90%. The complex coupled two-phase (liquid and gas) transport process involving capillary wicking, evaporation, adsorption and desorption were critically examined by analysing the dynamics of multiple interfaces during horizontal wicking. Relying upon visible colorimetric changes, HKUST-1 sustained on the copper woven mesh could expedite quantitative analysis of the coupled capillary evaporation process. In principle, this is primed to offer fundamental insights into the mechanisms of transport phenomena. Introduction of such previously unreported hierarchical porous structures could also potentially advance the state-of-the-art of passive thermal management technologies. In essence, a new route to elicit superhydrophilic surfaces emerges, paving new ways for understanding the intrinsic mechanisms of phase-change heat transfer.

The trapping of paraffins is beneficial compared to selective olefin adsorption for adsorptive olefin purification from a process engineering point of view. Here we demonstrate the use of a series of Zn2(X-bdc)2(dabco) (where X-bdc2- is bdc2- = 1,4-benzenedicarboxylate with substituting groups X, DM-bdc2- = 2,5-dimethyl-1,4-benzenedicarboxylate or TM-bdc2- = 2,3,5,6-tetramethyl-1,4-benzenedicarboxylate and dabco = diazabicyclo[2.2.2.]octane) metal-organic frameworks (MOFs) for the adsorptive removal of ethane from ethylene streams. The best performing material from this series is Zn2(TM-bdc)2(dabco) (DMOF-TM), which shows a high ethane uptake of 5.31 mmol g-1 at 110 kPa, with a good IAST selectivity of 1.88 towards ethane over ethylene. Through breakthrough measurements a high productivity of 13.1 L kg-1 per breakthrough is revealed with good reproducibility over five consecutive cycles. Molecular simulations show that the methyl groups of DMOF-TM are forming a van der Waals trap with the methylene groups from dabco, snuggly fitting the ethane. Further, rarely used high pressure coadsorption measurements, in pressure regimes that most scientific studies on hydrocarbon separation on MOFs ignore, reveal an increase in ethane capacity and selectivity for binary mixtures with increased pressures. The coadsorption measurements reveal good selectivity of 1.96 at 1000 kPa, which is verified also through IAST calculations up to 3000 kPa. This study overall showcases the opportunities that pore engineering by alkyl group incorporation and pressure increase offer to improve hydrocarbon separation in reticular materials.

Superhydrophobic MOF-nanosheets assembled on the outside of an aqueous droplet form ‘liquid marbles’. A facile mechanochemical-based synthesis followed by ultrasonication was used to prepare two-dimensional superhydrophobic–oleophilic MOF nanosheets of a Co2+-based zeolitic imidazolate framework, namely ZIF-9-III ([Co4(bIm)16] with bIm− = benzimidazolate). The resulting ZIF-9-III showed excellent hydrophobicity (advancing water contact angle of 144°) and oleophilicity (oil contact angle of ≈0°). The superhydrophobic behavior originated from its predominant outer (002) surface, which featured nanoscale corrugation caused by the exposed benzimidazole groups. This behavior was corroborated by inverse gas chromatography measurements to determine the surface energies of bulk exfoliated 2D ZIF-9-III nanosheets and 3D ZIF-9-I. Taking advantage of the unique surface properties, including low surface energy and good moisture stability, we prepared ZIF-9-III@PVDF (PVDF = polyvinylidene fluoride) membranes following the non-solvent induced phase inversion (NIPS) process. The resulting membranes were exploited in real-time oil/water separation and featured remarkably high adsorption capacity and anti-staining properties. Therefore, this work opens the door to developing new superhydrophobic MOF-based composite materials with permeant porosity, which may enable applications in self-cleaning membranes for oil–water separation.

The thermodynamic stability and melting point of magnesium borohydride were probed under hydrogen pressures up to 1000 bar (100 MPa) and temperatures up to 400 °C. At 400 °C, Mg(BH4)2 was found to ...

Metal–organic frameworks with open metal sites are promising materials for gas separations. Particularly, the M2(dobdc) (dobdc4– = 2,5-dioxidobenzenedicarboxylate, M2+ = Co2+, Mn2+, Fe2+, ...) fram...

Magnesium borohydride (Mg(BH4)2, abbreviated here MBH) has received tremendous attention as a promising onboard hydrogen storage medium due to its excellent gravimetric and volumetric hydrogen storage capacities. While the polymorphs of MBH-alpha (α), beta (β), and gamma (γ)-have distinct properties, their synthetic homogeneity can be difficult to control, mainly due to their structural complexity and similar thermodynamic properties. Here, we describe an effective approach for obtaining pure polymorphic phases of MBH nanomaterials within a reduced graphene oxide support (abbreviated MBHg) under mild conditions (60-190 °C under mild vacuum, 2 Torr), starting from two distinct samples initially dried under Ar and vacuum. Specifically, we selectively synthesize the thermodynamically stable α phase and metastable β phase from the γ-phase within the temperature range of 150-180 °C. The relevant underlying phase evolution mechanism is elucidated by theoretical thermodynamics and kinetic nucleation modeling. The resulting MBHg composites exhibit structural stability, resistance to oxidation, and partially reversible formation of diverse [BH4]- species during de- and rehydrogenation processes, rendering them intriguing candidates for further optimization toward hydrogen storage applications.

Metal–organic framework nanosheets (MONs) are attracting increasing attention as a diverse class of two-dimensional materials derived from metal–organic frameworks (MOFs). The principles behind the design of layered MOFs that can readily be exfoliated to form nanosheets, however, remain poorly understood. Here we systematically investigate an isoreticular series of layered MOFs functionalized with alkoxy substituents in order to understand the effect of substituent alkyl chain length on the structure and properties of the resulting nanosheets. A series of 2,5-alkoxybenzene-1,4-dicarboxylate ligands (O2CC6H2(OR)2CO2, R = methyl–pentyl, 1–5, respectively) was used to synthesize copper paddle-wheel MOFs. Rietveld and Pawley fitting of powder diffraction patterns for compounds Cu(3–5)(DMF) showed they adopt an isoreticular series with two-dimensional connectivity in which the interlayer distance increases from 8.68 Å (R = propyl) to 10.03 Å (R = pentyl). Adsorption of CO2 by the MOFs was found to increase from 27.2 to 40.2 cm3 g–1 with increasing chain length, which we attribute to the increasing accessible volume associated with increasing unit-cell volume. Ultrasound was used to exfoliate the layered MOFs to form MONs, with shorter alkyl chains resulting in higher concentrations of exfoliated material in suspension. The average height of MONs was investigated by AFM and found to decrease from 35 ± 26 to 20 ± 12 nm with increasing chain length, with the thinnest MONs observed being only 5 nm, corresponding to five framework layers. These results indicate that careful choice of ligand functionalities can be used to tune nanosheet structure and properties, enabling optimization for a variety of applications., A series of layered copper metal−organic frameworks (MOFs) were synthesized, utilizing benzene-1,4-dicarboxylates difunctionalized in the 2,5-positions with alkoxy pendent chains (methoxy-pentoxy) as the organic ligands. Increasing the chain length from propoxy to pentoxy increased the interlayer distance, resulted in increased CO2 uptake, and aided the ultrasonic exfoliation of these MOFs to form nanosheets, producing MONs down to just 5 nm thick.

Several metal-organic frameworks are known to display negative thermal expansion (NTE). However, unlike traditional NTE material classes, there have been no reports where the thermal expansion of a MOF has been tuned continuously from negative to positive through the formation of single-phase solid solutions. In the system Zn-DMOF-TMx, Zn2[(bdc)2-2x(TM-bdabco)2x][dabco], the introduction of increasing amounts of TM-bdc, with four methyl groups decorating the benzene dicarboxylate linker, leads to a smooth transition from negative to positive thermal expansion in the a-b plane of this tetragonal material. The temperature at which zero thermal expansion occurs evolves from ∼186 K for the Zn-DMOF parent structure (x = 0) to ∼325 K for Zn-DMOF-TM (x = 1.0). The formation of mixed linker solid solutions is likely a general strategy for the control of thermal expansion in MOFs.

Die Blockchain-Technologie ist derzeit in aller Munde und hat auch die Energiewirtschaft erreicht. Sie ermoglicht Transaktionen, die dauerhaft und fur jeden nachvollziehbar dokumentiert sind und somit ohne vertrauensvollen Mittelsmann erfolgen. Damit eroffnet die Blockchain-Technologie auch fur die Energiewirtschaft neue Optionen, wie z. B. fur die Finanzierung von Anlagen, den Herkommensnachweis und den Handel mit (erneuerbaren) Energien. Das Projekt SonnWende+ befasst sich anhand konkreter Anwendungsfalle mit dem Einsatz der Blockchain-Technologie im Energiebereich, den technologischen Moglichkeiten, rechtlichen Rahmenbedingungen sowie den Bedarf und die Akzeptanz bei Stakeholder/innen und Nutzer/innen. Im Zuge des Co-Creation-Prozesses wurde eine Befragung unter Entscheidungstrager/innen aus dem Energiebereich durchgefuhrt, die beleuchtet, welche Gamechanger-Potenziale die Energie-Stakeholder/innen durch die Blockchain-Technologie sehen. Die Befragung zeigt, dass sich die Energiewirtschaft bereits aktiv mit dem Thema Blockchain befasst und durchaus die Vorteile dieser neuen Technologie erkannt werden. Besondere Chancen werden beim Lademanagement fur E-Mobilitat, neuen Formen des Energiehandels und im Netzmanagement gesehen. Rund ein Funftel der befragten Entscheidungstrager/innen glaubt an Blockchain als Gamechanger fur die Energiewirtschaft. Dementsprechend wird auch fur einige Akteure in der Energiewirtschaft durchaus ein hohes Disruptionspotenzial erwartet. Aus der Befragung geht jedoch auch eine gewisse Skepsis und Unsicherheit gegenuber der neuen Technologie hervor. Die von den Entscheidungstrager/innen genannten Hurden und Gefahren verdeutlichen den Bedarf nach inter- und transdisziplinar angelegten Projekten, die den sinnvollen Einsatz der Blockchain-Technologie in der Energiebranche anwendungsorientiert implementieren, analysieren und vorantreiben. Dieser Know-how-Aufbau soll es der osterreichischen Energiewirtschaft ermoglichen, in Zukunft die Rahmenbedingungen fur den Einsatz der Blockchain-Technologie aktiv mitzugestalten.

Here we report on the synthesis, structure, and characterization of the first example of a polyoxopalladate (POP)-based metal-organic framework (MOF). This novel class of materials comprises discrete polyoxo-13-palladate(II) nanocubes [Pd13O8(AsO4)8H6]8– decorated by four Ba2+ ions on each of two opposite faces. These secondary building units (SBUs) are linked to each other via rigid linear organic groups, resulting in a stable 3D POP-MOF framework, which exhibits interesting sorption as well as catalytic properties.

In recent years a massive increase in publications on conventional 2D materials (graphene, h-BN, MoS2) is documented, accompanied by the transfer of the 2D concept to porous (crystalline) materials, such as ordered 2D layered polymers, covalent-organic frameworks, and metal–organic frameworks. Over the years, the 3D frameworks have gained a lot of attention for use in applications, ranging from electronic devices to catalysis, and from information to separation technologies, mostly due to the modular construction concept and exceptionally high porosity. A key challenge lies in the implementation of these materials into devices arising from the deliberate manipulation of properties upon delamination of their layered counterparts, including an increase in surface area, higher diffusivity, better access to surface sites and a change in the band structure. Within this minireview, we would like to highlight recent achievements in the synthesis of 2D framework materials and their advantages for certain applications, and give some future perspectives., In recent years the 2D concept has been transferred from conventional 2D materials to porous 2D framework materials. This minireview takes a closer look onto the preparation of 2D framework materials and their merits for energy applications.

A general problem when designing functional nanomaterials for energy storage is the lack of control over the stability and reactivity of metastable phases. Using the high-capacity hydrogen storage candidate LiAlH

A general problem when designing functional nanomaterials for energy storage is the lack of control over the stability and reactivity of metastable phases. Using the high-capacity hydrogen storage candidate LiAlH4 as an exemplar, we demonstrate a new approach to thermodynamic stabilization of metastable metal hydrides by coordination to nitrogen binding sites within the nanopores of N-doped CMK-3 carbon (NCMK-3). The resulting LiAlH4@NCMK-3 material releases H2 at temperatures as low as 126 °C with full decomposition below 240 °C, bypassing the usual Li3AlH6 intermediate. Moreover, >80% of LiAlH4 can be regenerated under 100 MPa H2, a feat previously thought to be impossible. The nitrogen sites lower the energy barrier for regenerating the hydride by changing the density of states in the vicinity of the Fermi level, effectively acting as solvation sites for lithium ions. Theoretical calculations provide a rationale for the unprecedented solid-state reversibility, which derives from the combined effects of nanoconfinement, Li adatom formation, and charge redistribution between the metal hydride and the host.

A hybrid of GA@UiO-66-NH2 was synthesized based on the covalent assembly of graphene acid (GA) and the amine functionalized UiO-66 metal-organic framework through amide bonds. This strategy endows the material with unique properties, such as hierarchical pores, a porous conductive network decorated with functional groups, a high specific surface area, and a good chemical and thermal stability. The resultant hybrid has an electrical resistance of similar to 10(4) omega, whereas the pristine GA and UiO-66-NH2 possess an electrical resistance of similar to 10(2) omega and similar to 10(9) omega, respectively. The hybrid GA@UiO-66-NH2 was demonstrated for CO2 chemiresistive sensing and displayed a very fast response and quick recovery time of similar to 18 s for 100% CO2, at 200 degrees C. While the pristine GA exhibits negligible response under the same conditions, GA@UiO-66-NH2 exhibited a response of 10 +/- 0.6%. Further, in situ temperature dependent Raman studies during CO2 exposure confirm the presence of strong hydrogen bonding interaction between CO2 and the amide functionality present on GA@UiO-66-NH2. The resulting gas sensing characteristics of GA@UiO-66-NH2 are majorly attributed to the better interaction of CO2 at the amide/amine functional groups and the readily accessible hierarchical pores. This design strategy opens new horizons in the development of covalently linked hybrids with hierarchical porous conductive networks which can help to improve the gas sensing properties of MOF-based materials. Web of Science 9 32 17441 17434

Flexible metal–organic frameworks (MOFs) show large structural flexibility as a function of temperature or (gas)pressure variation, a fascinating property of high technological and scientific relevance. The targeted design of flexible MOFs demands control over the macroscopic thermodynamics as determined by microscopic chemical interactions and remains an open challenge. Herein we apply high‐pressure powder X‐ray diffraction and molecular dynamics simulations to gain insight into the microscopic chemical factors that determine the high‐pressure macroscopic thermodynamics of two flexible pillared‐layer MOFs. For the first time we identify configurational entropy that originates from side‐chain modifications of the linker as the key factor determining the thermodynamics in a flexible MOF. The study shows that configurational entropy is an important yet largely overlooked parameter, providing an intriguing perspective of how to chemically access the underlying free energy landscape in MOFs., By combining high‐pressure powder X‐ray diffraction and molecular dynamics simulation we gain insight into the microscopic chemical factors that determine the high‐pressure macroscopic thermodynamics of two flexible pillared‐layer MOFs, identifying configurational entropy as originating from side‐chain modifications as the determining factor of the macroscopic thermodynamics.

In this work, the covalent attachment of an amine functionalized metal‐organic framework (UiO‐66‐NH2= Zr6O4(OH)4(bdc‐NH2)6; bdc‐NH2= 2‐amino‐1,4‐benzenedicarboxylate) (UiO‐Universitetet i Oslo) to the basal‐plane of carboxylate functionalized graphene (graphene acid = GA) via amide bonds is reported. The resultant GA@UiO‐66‐NH2hybrid displayed a large specific surface area, hierarchical pores and an interconnected conductive network. The electrochemical characterizations demonstrated that the hybrid GA@UiO‐66‐NH2acts as an effective charge storing material with a capacitance of up to 651 F g−1, significantly higher than traditional graphene‐based materials. The results suggest that the amide linkage plays a key role in the formation of a π‐conjugated structure, which facilitates charge transfer and consequently offers good capacitance and cycling stability. Furthermore, to realize the practical feasibility, an asymmetric supercapacitor using a GA@UiO‐66‐NH2positive electrode with Ti3C2TXMXene as the opposing electrode has been constructed. The cell is able to deliver a power density of up to 16kW kg−1and an energy density of up to 73Wh kg−1, which are comparable to several commercial devices such as Pb‐acid and Ni/MH batteries. Under an intermediate level of loading, the device retained 88% of its initial capacitance after 10 000 cycles.

The flexible mixed-metal pillared-layered metal-organic framework (MOF) Zn1.9Cu0.1(BME-bdc)2(dabco) (BME-bdc2– = 2,5-bis(2-methoxyethoxy)-1,4-benzenedicarboxylate, dabco = diazabicyclo[2.2.2]octane) with Cu2+ dopants as electron paramagnetic resonance (EPR) active probes was synthesized, and the guest-induced phase transition was studied by a newly developed in situ gas sorption EPR setup. Within the structure, the Cu2+ ions do not build any Cu2+–Cu2+ paddlewheels, and only mixed-metal Zn2+–Cu2+ paddlewheels were identified by EPR. Two distinct Zn2+–Cu2+ species (A and B) occur in the structure: Species A occurs in regions with low Cu2+ concentrations and has no adjacent mixed-metal paddlewheel units. Species B is present in domains with higher local copper concentrations, where adjacent mixed-metal paddlewheel units alter the EPR signal. The parent monometallic Zn MOF is known to undergo phase transitions from a narrow pore (np) to a large pore (lp) phase due to host-guest interactions with CO2. In situ ...

Flexible metal-organic frameworks (MOFs) exhibit large potential as next-generation materials in areas such as gas sensing, gas separation and mechanical damping. By using a mixed metal approach, we report how the stimuli reponsive phase transition of flexible pillared-layered MOFs can be tuned over a wide range. Different Cu2+ to Zn2+ metal ratios are incorporated into the materials by using a simple solvothermal approach. The properties of the obtained materials are probed by differential scanning calorimetry and CO2 sorption measurements, revealing stimuli responsive behaviour as a function of metal ratio. Pair distribution functions derived from X-ray total scattering experiments suggest a distortion of the M2 paddlewheel as a function of the Cu content. We rationalize these phenomena by the different distortion energies of Cu2+ and Zn2+ ions to deviate from the square pyramidal structure of the relaxed paddlewheel node. Our work follows on from the large interest in tuning and understanding the materials properties of flexible MOFs, highlighting the large number of parameters that can be used for the targeted manipulation and design of properties of these fascinating materials.

Knowledge and foundational understanding of phenomena associated with the behavior of materials at the nanoscale is one of the key scientific challenges toward a sustainable energy future. Size reduction from bulk to the nanoscale leads to a variety of exciting and anomalous phenomena due to enhanced surface-to-volume ratio, reduced transport length, and tunable nanointerfaces. Nanostructured metal hydrides are an important class of materials with significant potential for energy storage applications. Hydrogen storage in nanoscale metal hydrides has been recognized as a potentially transformative technology, and the field is now growing steadily due to the ability to tune the material properties more independently and drastically compared to those of their bulk counterparts. The numerous advantages of nanostructured metal hydrides compared to bulk include improved reversibility, altered heats of hydrogen absorption/desorption, nanointerfacial reaction pathways with faster rates, and new surface states capable of activating chemical bonds. This review aims to summarize the progress to date in the area of nanostructured metal hydrides and intends to understand and explain the underpinnings of the innovative concepts and strategies developed over the past decade to tune the thermodynamics and kinetics of hydrogen storage reactions. These recent achievements have the potential to propel further the prospects of tuning the hydride properties at nanoscale, with several promising directions and strategies that could lead to the next generation of solid-state materials for hydrogen storage applications.

The pillared-layered metal–organic framework compounds M2(BME-bdc)2(dabco) (M2+ = Zn2+, Co2+, Ni2+, Cu2+; BME-bdc2– = 2,5-bis(2-methoxyethoxy)-1,4-benzenedicarboxylate; dabco = diazabicyclo[2.2.2]octane) exhibit structural flexibility and undergo guest and temperature-induced reversible phase transitions between a narrow pore (np) and a large pore (lp) form. These transitions were analyzed in detail by powder X-ray diffraction ex and in situ, isothermal gas adsorption measurements and differential scanning calorimetry. The threshold parameters (gas pressure or temperature), the magnitude of the phase transitions (volume change) as well as their transition enthalpies are strikingly dependent on the chosen metal cation M2+. This observation is assigned to the different electronic structures and ligand field effects on the coordination bonds. Accordingly, in situ powder X-ray diffraction measurements as a function of CO2 pressure reveal different mechanisms for the np to lp phase transition during CO2 adsorp...

Magnesium borohydride (Mg(BH

A metal–organic gel (MOG) similar in constitution to MIL-100 (Fe) but containing a lower connectivity ligand (5-aminoisophthalate) was integrated with an isophthalate functionalized graphene (IG). The IG acted as a structure-directing templating agent, which also induced conductivity of the material. The MOG@IG was pyrolyzed at 600°C to obtain MGH-600, a hybrid of Fe/Fe3C/FeOx enveloped by graphene. MGH-600 shows a hierarchical pore structure, with micropores of 1.1 nm and a mesopore distribution between 2 and 6 nm, and Brunauer–Emmett–Teller surface area amounts to 216 m2/g. Furthermore, the MGH-600 composite displays magnetic properties, with bulk saturation magnetization value of 130 emu/g at room temperature. The material coated on glassy carbon electrode can distinguish between molecules with the same oxidation potential, such as dopamine in presence of ascorbic acid and revealed a satisfactory limit of detection and limit of quantification (4.39 × 10−7 and 1.33 × 10−6 M, respectively) for the neurotransmitter dopamine.

Potassium‐ion batteries (KIBs) have attracted enormous attention as a next‐generation energy storage system due to their low cost, fast ionic conductivity within electrolytes, and high operating voltage. However, developing suitable electrode materials to guarantee high‐energy output and structural stability to ensure long cycling performance remains a critical challenge. Herein, anatase TiO2 nanoparticles are encapsulated in nitrogen‐rich graphitic carbon (TiO2@NGC) with hierarchical pores and high surface area (250 m2 g−1) using the Ti‐based metal–organic framework NH2‐MIL‐125 (Ti8O8(OH)4(NH2‐bdc)6 with NH2‐bdc2− = 2‐amino‐1,4‐benzenedicarboxylate) as a sacrificial template. Serving as the anode material in a K‐ion half‐cell, TiO2@NGC delivers a high capacity of 228 mA h g−1 with remarkable cycling performance (negligible loss over 2000 cycles with more than 98% Coulombic efficiency). The charge‐storing mechanism is underpinned using ex situ characterization techniques such as ex situ X‐ray diffraction (XRD) and scanning electron microscopy (SEM) analysis. It is revealed that the original TiO2 phase gets transformed to the anorthic Ti7O13 and monoclinic K2Ti4O9 phase after the first charge/discharge cycle, which further initiates the charge storage process via the conversion reactions.

Herein, a novel polymer-templated strategy is described to obtain 2D nickel-based MOF nanosheets using Ni(OH)2, squaric acid, and polyvinylpyrrolidone (PVP), where PVP has a dual role as a structure-directing agent, as well as preventing agglomeration of the MOF nanosheets. Furthermore, a scalable method is developed to transform the 2D MOF sheets to Ni7S6/graphene nanosheet (GNS) heterobilayers by in situ sulfidation using thiourea as a sulfur source. The Ni7S6/GNS composite shows an excellent reversible capacity of 1010 mAh g−1 at 0.12 A g−1 with a Coulombic efficiency of 98% capacity retention. The electrochemical performance of the Ni7S6/GNS composite is superior not only to nickel sulfide/graphene-based composites but also to other metal disulfide–based composite electrodes. Moreover, the Ni7S6/GNS anode exhibits excellent cycle stability (≈95% capacity retention after 2000 cycles). This outstanding electrochemical performance can be attributed to the synergistic effects of Ni7S6 and GNS, where GNS serves as a conducting matrix to support Ni7S6 nanosheets while Ni7S6 prevents restacking of GNS. This work opens up new opportunities in the design of novel functional heterostructures by hybridizing 2D MOF nanosheets with other 2D nanomaterials for electrochemical energy storage/conversion applications.

Current research effort aims at developing and designing new sensing platform architectures for effectively assaying biological targets that are significantly important for human healthcare and medical diagnosis. Here, we proposed a novel nanostructured sensor based on the combination of fluorinated graphene oxide and iron-based metal-organic gel (FGO@Fe-MOG). The unique properties including hierarchical porosity along with excellent electron transfer behavior make it an ideal candidate for electrochemical sensing of thrombin with superior detection limits compared to other (electrochemical, fluorescence, and colorimetric) strategies. Specifically, thrombin-binding aptamer was immobilized onto FGO@Fe-MOG through strong electrostatic interaction without any special modification or labeling, and the electrochemical impedance spectroscopy was used as the analyzing tool. The introduced aptasensor revealed high selectivity and reproducibility toward thrombin with the detection limit of 58 pM. The effectiveness, reliability, and real applicability of the proposed FGO@Fe-MOG nanohybrid were also confirmed by the determination of thrombin in a complex biological matrix represented by human serum. Taking into account the superior detection limit, high selectivity, reproducibility, and precision, the developed scalable and label-free aptasensor meets the essential requirements for clinical diagnosis of thrombin.

A series of unprecedented crown ether- and thiacrown ether-derivatized benzene dicarboxylic acid (H2bdc) ligands has been synthesized and incorporated into the prototypical isoreticular metal-organic framework (IRMOF) and UiO-66 materials. In the case of UiO-66, only MOFs comprised from a mixed-ligand composition, requiring both unsubstituted bdc and crown ether containing ligands, could be prepared. These are among the few ligand derivatives, and resulting MOFs, that incorporate a macrocyclic group directly on the bdc ligand, providing a new, modular platform for exploring new supramolecular and coordination chemistry within MOFs.

We report the synthesis of a 2D-layered metal-organic framework incorporating weakly interacting chains designed to aid exfoliation of the layers into nanosheets. Dispersion of the nanosheets exposes labile metal-sites which are shown to exchange solvent molecules allowing the nanosheets to act as sensors in suspension.

Porosity switching in the crystalline solid state is a unique phenomenon observed only in a limited number of materials. The switching behavior of two metal-organic frameworks as well as their respective solid solutions of composition [Zn 2 (BME-bdc) x (DB-bdc) 2−x dabco] n (x = 2; 1.5; 1.0; 0.5; 0) is studied in situ during the adsorption of CO 2 and Xe using X-ray diffraction and NMR techniques. The diffraction data, measured during the adsorption suggest a direct one-step phase transition (switching) from the narrow pore phase to the large pore phase beyond the transition pressure. An intermediate phase was found only in one compound within a narrow pressure range around the phase transition pressure region. In situ high-pressure 13 C NMR spectroscopy of adsorbed CO 2 also allowed following the gating behavior of the studied materials by monitoring the signal of adsorbed CO 2 . The 13 C NMR spectra exhibit a pronounced broadening indicating a certain degree of order for the adsorbed molecules inside the pores. This ordering effect and the resulting line broadening depend on the linker functionalization as could be confirmed by corresponding molecular dynamics (MD) simulations.

A controlled secondary building unit approach (CSA) was employed to obtain a series of ruthenium metal-organic frameworks (MOFs) of the general formula [Ru3(BTC)2Xx]·Gg (BTC = 1,3,5-benzenetricarboxylate; X = counter-anion, G = guest molecules) which are structural analogues of [M3(BTC)2] (M = Cu, Zn, Ni, Cr, Mo). The compounds [Ru2(OOCR)4X] and [Ru2(OOCCH3)4]Y were varied as Ru sources for CSA; namely strong coordinating X (Cl–) and weakly coordinating Y ([BF4]– or [BPh4]–) as well as the alkyl groups at the carboxylate ligand [R = CH3 or C(CH3)3] were utilized. Four phase-pure Ru-MOFs were obtained: [Ru3(BTC)2Cl0.5(OH)]·(AcOH)1.5 (1), [Ru3(BTC)2Cl1.2(OH)0.3]·(H3BTC)0.15(AcOH)2.4(PivOH)0.45 (2), [Ru3(BTC)2F0.5(OH)]·(AcOH)1.0 (3) and [Ru3(BTC)2(OH)1.5]·(H3BTC)0.5·(AcOH)1.4 (4) {AcOH = CH3COOH, PivOH = (CH3)3CCOOH}. The series of characterization data support the analytical composition and isostructural nature of 1–4, i.e. powder X-ray diffraction (PXRD), IR- and 1H-NMR spectroscopy, thermal gravimetric analysis (TGA) and N2 sorption were employed. The valence state of the Ru-sites were studied by X-ray absorption spectroscopy (XAS). The chosen precursors for CSA and optimized synthesis, work-up and activation protocols allowed improvement of the overall crystallinity, purity (i.e., residual solvent molecules) and surface area of the Ru-MOF materials.

A series of four Zn2+ metal–organic frameworks containing functionalised isophthalate linkers and 4,4′-bipyridine pillars have been prepared and characterised. Isophthalates which contain –OC3H2n+1 alkoxy side chains (with n = 1, 2 or 3) form frameworks with a 3D pillared-layer topology instead of the typical 2D layer topology of the renowned coordination polymers with an interdigitated structure (CIDs), which is found for shorter –OC2H5 side chains. The gas adsorption properties of the materials were analysed using N2, CO2 and O2 adsorption measurements at low temperatures.

Functionalized metal–organic frameworks (fu-MOFs) of general formula [Zn2(fu-L)2dabco]n show unprecedentedly large uniaxial positive and negative thermal expansion (fu-L = alkoxy functionalized 1,4-benzenedicarboxylate, dabco = 1,4-diazabicyclo[2.2.2]octane). The magnitude of the volumetric thermal expansion is more comparable to property of liquid water rather than any crystalline solid-state material. The alkoxy side chains of fu-L are connected to the framework skeleton but nevertheless exhibit large conformational flexibility. Thermally induced motion of these side chains induces extremely large anisotropic framework expansion and eventually triggers reversible solid state phase transitions to drastically expanded structures. The thermo-responsive properties of these hybrid solid–liquid materials are precisely controlled by the choice and combination of fu-Ls and depend on functional moieties and chain lengths. In principle, this combinatorial approach allows for a targeted design of extreme thermo-mechanical properties of MOFs addressing the regime between crystalline solid matter and the liquid state.

Substitution of 1,4-benzenedicarboxylate (bdc) with additional alkoxy chains is the key to construct a family of metal–organic frameworks (MOFs) of the type [Zn2(fu-bdc)2(bipy)]n (fu-bdc = functionalized bdc; bipy = 4,4′-bipyridine) exhibiting a honeycomb-like topology instead of the default pillared square-grid topology. Both the substitution pattern of the phenyl ring of the fu-bdc linker and the chain length of the alkoxy substituents have a major impact on the structure of the derived frameworks. Substitution at positions 2 and 3 leads to the trivial pillared square-grid framework, and substitution at positions 2 and 5 or 2 and 6 yields MOFs with the honeycomb-like topology. Also, simple methoxy substituents lead to the construction of a pillared square-grid topology, whereas longer substituents like ethoxy, n-propoxy, and n-butoxy generate honeycomb-like framework structures. These honeycomb MOFs feature one-dimensional channels, which are tuneable in diameter and functionality by the choice of substituent attached to the bdc-type linker. Pure component sorption isotherms indicate that the honeycomb-like frameworks selectively adsorb CO2 over N2 and CH4.