Search

Infections caused by resistant microorganisms are a complex global public health challenge, and the way to combat the increase of resistance is the development of more modern and faster techniques for resistance detection. This study aimed to evaluate the transport of inactivated bacteria impregnated in a filter paper disk to detect carbapenem resistance genes by multiplex real-time PCR (qPCR) using high-resolution melting (HRM). A total of 88 isolates of 10 different species of Enterobacterales harboring well-characterized carbapenem resistance genes were evaluated. A full 10-µL loop of fresh growth of bacteria were impregnated in a filter paper disk, which was left at room temperature for 2 days in order to simulate the time spent in transportation. Bacterial inactivation was performed with 70% ethanol at 15 min. Afterwards, the DNA was extracted from the paper disks for further analysis by qPCR HRM. The time of 15 min in 70% ethanol was enough to inactivate all the isolates tested. It was possible to correctly identify the presence of the carbapenem resistance gene by HRM qPCR in 87 isolates (98.87%) that were transported in the filter paper disks. Our results indicated that it is possible to use filter paper to transport inactivated bacteria and to identify carbapenem resistance genes by qPCR HRM. This alternative tends to facilitate the access to this technology by many laboratories which do not have the qPCR equipment.

This article describes how crystalline or fibrous nanocellulose influences the mechanical properties of paper substrate. In this context, we used commercially available cellulose nanocrystals, mechanically prepared cellulose nanofibers dispersed in water or ethanol, and carboxy cellulose nanofibers. Selective reinforcement of the paper treated with the nanocellulose samples mentioned above was observed. The change in the fibre structure was assessed using scanning electron microscopy, roentgenography, and spectroscopy techniques. In addition, the effect of nanocellulose coating on physical properties was evaluated, specifically tensile index, elongation coefficient, Elmendorf tear resistance, Bendtsen surface roughness, Bendtsen air permeability, and bending strength. It can be concluded that the observed decrease in the strength properties of the paper after applying some NC compositions is due to the loss of potential disturbances in hydrogen bonds between the nanocellulose dispersed in ethanol and the paper substrate. On the other hand, significantly increased strength was observed in the case of paper reinforced with nanocellulose functionalized with carboxyl groups.

Paper mulberry, a fast-growing and vigorous plant, is a potential substrate for producing lignocellulosic bioethanol and an important renewable alternative to fossil fuels. In order to improve the economic feasibility of ethanol production from paper mulberry, H3PO4/H2O2 pretreatment was selected as the most suitable pretreatment method that could produce the highest glucose concentration (131 g/L) compared with other pretreatments (73.2–89.3 g/L) at high solid loading. Whereafter, the final solid loading of H3PO4/H2O2 pretreatment was significantly increased to 40% (w/v) without any decrease in the final glucose concentration. Finally, a novel Fed-nonisothermal-simultaneous saccharification and fermentation was constructed using H3PO4/H2O2 pretreated paper mulberry, which bypassed the inhibition caused by paper mulberry solid and high temperature on the traditional simultaneous saccharification and fermentation, improving ethanol concentration (63.9 g/L), ethanol productivity (1.33 g/L/h) and ethanol yield (0.160 g/g-biomass) by 30.4%, 30.4% and 30.1%, respectively, compared to those obtained from SSF (simultaneous saccharification and fermentation) process. Thus, we have opened up a novel way to produce ethanol or other biofuels using the paper mulberry as an outstanding alternative substrate.

A method for treating cellulose paper using the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was developed. The treatment was intended to reform the paper structure. Filter paper was immersed in 20 g of molten [BMIM]Cl at 80 °C for 20–80 s and then washed with ethanol and distilled water. The treated paper was then immersed in tert-butyl alcohol before drying in a freeze dryer for 30 min. Next, polyethylene glycol (PG) and trichloromethylsilane were fixed to freeze-dried paper. The paper treated with [BMIM]Cl had a higher specific surface area than that not treated with [BMIM]Cl, and the specific surface area increased as the treatment time increased. The amount of PG fixed to the paper increased as the specific surface area of the paper increased, and PG improved moisture retention. The degree to which the moisture retention was improved was therefore related to the increase in the specific surface area caused by [BMIM]Cl treatment. Addition of trichloromethylsilane to the paper treated with [BMIM]Cl improved the hydrophobicity, and this was caused by the [BMIM]Cl treatment. Overall, [BMIM]Cl treatment was effective for reforming the paper structure and this improved the amount of functional material that could be fixed to the paper.

A paper based chemiresistor has been fabricated to selectively sense ethanol in human breath. The chemiresistor was composed of a sensing mixture of multiwall-carbon-nano-tubes (MWCNTs), poly (diallyl-dimethyl-ammonium chloride) (PDDA), alcohol dehydrogenase (ADH), and coenzyme (NADH). The aluminum electrode was deposited on the paper surface, followed by drop-casting of the aforementioned sensing mixture. The resistance of the sensors was measured by exposing the same in gas-vapor mixture as well as the sample solution. The surface-modified MWCNTs specifically broke down ethanol present in the gas-vapor mixture or in a solution to generate a quantitative electronic response proportional to the ethanol concentration. Subsequently, the interference of other volatile organic materials was also tested to prove the selectivity and sensitivity of the sensor towards ethanol in the presence of different volatile organic compounds (VOCs). The variation of the resistance during the interaction between sensor and ethanol was also characterized by measuring the surface potential of the channel material under ethanol exposure using Kelvin probe force microscopy (KPFM). The sensor was integrated with a voltage divider circuit, a display, and a microcontroller unit to make a proof-of-concept prototype for the point-of-care (POC) detection of ethanol in human breath.

This work presents a novel development that exploits the concept of in-situ gas-separation together with a specific enzymatic colorimetric detection to produce a portable biosensor called “Blood Alcohol Micro-pad” for direct quantitation of ethanol in whole blood. The thin square device (25 mm × 25 mm × 1.8 mm) comprises two layers of patterned filter paper held together with a double-sided mounting tape with an 8-mm circular hole (the headspace). In operation, the reagent is deposited on one layer and covered with sticky tape. Then 8 μL of a blood sample is dispensed onto the opposite layer and covered with sticky tape. Diffusion of ethanol across the 1.6 mm narrow headspace permits selective detection of ethanol by the enzymatic reagents deposited on the opposite layer. This reagent zone contains alcohol oxidase, horseradish peroxidase and 2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt, as the chromogenic reagent. The color intensity, measured from the recorded digital image, resulting from the enzymatic assay of ethanol, correlates with the concentration of blood alcohol. The results obtained with spiked mice and sheep blood samples, using an external calibration in the range of 1–120 mg dL−1ethanol, gave recoveries of 93.2–104.4% (n = 12). The “Blood Alcohol Micro-pad” gave good precision with %RSD

Migration of per- and polyfluorinated alkyl substances (PFAS) from paper food contact materials (FCMs) can pose a consumer risk. However, risk assessment procedures typically do not consider PFAS contribution from FCMs. Moreover, migration studies are often limited to one subclass of PFAS or simplified by using food simulants (FS). To assess the risk comprehensively, migration of three PFAS subclasses (perfluorinated carboxylic acids/ sulfonic acids (PFCAs/PFSAs), polyfluoroalkyl phosphate esters (PAPs), and fluorotelomer alcohols (FTOHs)) from six FCMs were investigated to FS (50% and 20% ethanol) and food (oatmeal porridge, muffins, and tomato soup) under high-temperature conditions. Migration of PFCAs and FTOHs to all food samples was observed. Migration of PFCAs and FTOHs to 50% ethanol was significantly higher than migration to real food whilst FTOHs did not migrate into 20% ethanol. Estimated dietary PFAS exposure for children (1.06 - 5.67 ng/kgbw/day) exceeded EFSA's proposed safety threshold (0.63 ng/kgbw/day), risking consumer health.

Analytical strategies to ensure the quality and safety of food products without the need for skilled personnel are highly required. The simplicity of glucose strips for diabetes monitoring should be translated to the agri-food sector, ensuring easy evaluation of certain molecules and/or the freshness of a beverage/foodstuff. In addition to the well-known advantages that are characteristic of electroanalytical methods over other methods, paper-based materials are being used to further reduce the gap between complex laboratory testing and simple point-of-need testing. This article highlights some of the most recent advances in the development of paper-based electrochemical approaches for food surveillance, specifically focusing on the use of novel paper-based materials. Two examples are discussed: the development of a miniaturized biosensor realized on copy paper for the quantification of ethanol in commercial beers, and the measurement of ascorbic acid in food supplements within printed electronics supports. Paper-based materials have the potential to lower economic costs, simplify the operative tasks, and most importantly reduce waste generation. The continued combination of manufacturing methods and functional (smart) materials will facilitate the implementation of food analysis at the point of need.

Thermophilic methane fermentation was a valid approach for handling the stillage eluted from ethanol fermentation of waste paper and kitchen waste. The wide organic loading rate (OLR) range (2-14 g VTS/(L d)) for stable performance and relatively high energy recovery efficiency (79.0%) were achieved, and OLR of 8 g VTS/(L d) was optimum for achievement of highest biogas evolution and VTS removal efficiency. Microbial community analysis revealed that hydrolysis of cellulose was the critical step for methane production from the stillage.

A novel visual and fluorometric-sensor paper is prepared for the monitoring of atmospheric humidity and ethanol. The paper contains a combination of copper nanoclusters (CuNCs) and carbon dots (CDs), immobilized on a filter paper. This makes it a dual-emission system. The visual sensor shows bright fluorescence and has a diameter of ∼8 cm with uniform and homogeneous surface. The detection mechanism of the sensing paper is based on the fluorescence intensity variation of CuNCs in different environments. Desirable linear relationship is observed between fluorescence intensity ratio (red/blue) and humidity. Visible color transformation of this sensor paper is observed in the humidity range ∼40-80%, implying utility for easy and facile atmospheric humidity determination. Furthermore, due to the water and ethanol have different impacts on the spectrum, this paper-based fluorescent probe shows excellent response to ethanol. Therefore dual-emitting sensing paper, when suitably calibrated, shows promise for visual and fluorometric sensing platforms aimed at humidity or ethanol detection.

Paper is a perfect example of the circular economy as it remains the furthermost recycled product in Europe, creating significant environmental benefits and raw materials resources to the industry. Indeed, maintaining a consistent level of quality whilst limiting the environmental footprint of the product has become a major challenge for the industry. In this direction, paper is proving to be the promising feedstock for biorefinery and biomaterials. The future of paper recycling is slowly going beyond fibre recovery to address the needs of other industries because for the earth's environmental well-being various paper products need to be recycled and reused persistently. In this article, we outline the ambitious use of wastepaper (WP) for high-value applications such as; production of cellulose nanocrystals (CNC), composite reinforcement, high performance electrical components and biofuels.

In the present study, pre-treated paper mill sludge (PMS) was evaluated extensively as a substrate for production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337. The PMS was subj...

This work describes the screening of twenty three per- and polyfluoroalkyl substances (PFASs) in twenty five paper and board (P/B) packaging materials and their migration to several food simulants (50% ethanol, 95% ethanol and Tenax®) at different conditions of time and temperature. A different migration pattern depending on the carbon chain length was observed; while short carbon chain PFASs tend to migrate more to 50% ethanol than to 95% ethanol, long chain PFASs showed the opposite trend. On the other hand, very low migration percentages of all PFASs to Tenax® were found. Finally, migration of 9 PFASs into real foods (cereals, rice and infant milk powder) for 6 months was quantified and compared with the results obtained with the simulants. As a result, significant underestimations of the PFASs migration to foodstuffs were obtained using Tenax®, especially for short carbon chain PFASs and milk powder.

This study investigated the extent of enzyme savings that could be achieved by recycling enzyme-containing supernatant or whole fermentation broth from simultaneous saccharification and fermentation (SSF) of paper waste sludge (PS). Kinetic models were developed to identify the preferred enzyme recycling method. Kinetic models accounted for the loss of enzyme activity with time and the effect of enzyme supplementation on ethanol concentrations and predicted the performance of PS fermentation with acceptable accuracy. Process performance of SSF cultures was maintained during successive recycling steps by recycling either the enzyme-containing supernatant or whole broth without resorting to enzyme separation methods. Recycling of enzymes in the clarified supernatant during 5 L bioreactor fermentations allowed up to 23% savings on the overall enzyme loading. Recycling enzymes in the supernatant further increased the ethanol concentration in the fermentation broth from 40 to 70 g/L. The combined advantages of high ethanol concentrations and savings on enzyme consumption, opens up the possibility of achieving significant improvements in the economic viability of ethanol production from lignocellulosic substrates.

The Brazilian cerrado is considered one of the most critical biomes in the world. Araticum (Annona crassiflora Mart.) is a native plant from the Brazilian cerrado, abundant in nutrients and highly energetic. This study aimed to obtain chemical fingerprints of different parts of the araticum fruit, i.e. pulp, peel, and seed. Extracts from these three parts were prepared using different solvents (ethanol, water, and mixtures of ethanol and water) and later analyzed by paper spray ionization mass spectrometry. In general, ethanol extracted more metabolites than the other solvents. The chemical profiles varied according to the fruit part, geographic location, and extractor solvent. Among the metabolites, acetogenins (62.3%) and alkaloids (20.7%) predominated. Principal component analyses revealed that the samples were grouped according to the fruit part, regardless of the extractor solvent used. Araticum shows remarkable potential due to the beneficial properties of the metabolites for human health. The insertion of araticum in the human diet is still underexplored but is a promising alternative.

Efficient ethanol production from waste paper requires the addition of expensive nutrients. To reduce the production cost of ethanol from waste paper, a study on how to produce ethanol efficiently by adding kitchen waste (potentially as a carbon source, nutrient source, and acidity regulator) to waste paper was performed and a process of successive liquefaction, presaccharification, and simultaneous saccharification and fermentation (L+PSSF) was developed. The individual saccharification performances of waste paper and kitchen waste were not influenced by their mixture. Liquefaction of kitchen waste at 90°C prior to presaccharification and simultaneous saccharification and fermentation (PSSF) was essential for efficient ethanol fermentation. Ethanol at concentrations of 46.6 or 43.6g/l was obtained at the laboratory scale after fermentation for 96h, even without pH adjustment and/or the addition of extra nutrients. Similarly, ethanol at a concentration of 45.5g/l was obtained at the pilot scale after fermentation for 48h. The ethanol concentration of L+PSSF of the mixture of waste paper and kitchen waste was comparable to that of PSSF of waste paper with added nutrients (yeast extract and peptone) and pH adjustment using H2SO4, indicating that kitchen waste is not only a carbon source but also an excellent nutrient source and acidity regulator for fermentation of the mixture of waste paper and kitchen waste.

As traditional barriers are vulnerable to organic solvents or surfactants, a new fluoroalkyl-silica barrier with superior confining ability was developed for paper-based analytical devices (PADs). The as-prepared fluoroalkyl-silica barrier is able to contain surfactant solutions and pure organic solvents even alcohols. Based on the fluoroalkyl-silica barrier, PADs associated with condensing-enrichment effect were explored for Ni(II) assays involving ethanol and bacteria assays including sodium dodecyl sulfate (SDS) and chloroform. The exhibited work has the potential to significantly expand the applications of paper-based microfluidics or assays to include process/analysis involving organic solvents or surfactant solutions.

Deacidification is an established conservation treatment for the prolongation of the acidic paper stability. Several different deacidification systems are in use today, such as the dispersions of alkaline nanoparticles in organic solvents. The aim of the study was to compare the effects of different calcium nanoparticle dispersions in alcohols on lignocellulosic paper. Commercially available nano calcium hydroxide dispersions for paper deacidification, and laboratory prepared nano calcium carbonate dispersions in ethanol and 2-propanol were investigated and compared as to their effectiveness in increasing the stability of paper. The FE-SEM analyses were used to determine the size of Ca(OH)2 and CaCO3 particles in the dispersions. The SEM–EDS analyses were performed both on the paper surface and its cross-section in order to ascertain the distribution of calcium ions following the deacidification treatment. An evaluation of the changes of color, molecular weight, pH and alkaline reserve on different lignocellulosic papers was performed. In comparison to untreated samples, our results indicate all the investigated deacidification treatments decrease the degradation rate constant of cellulose, as determined by accelerated degradation. However, the treatments involving nano calcium hydroxides in both alcohols noticeably affect the color of the treated lignocellulosic papers. According to the obtained results, nano calcium carbonate is therefore the more suitable deacidification agent for the lignin containing papers.

Per- and polyfluoroalkyl substances are synthetic environmental pollutants previously used for packaging applications as a grease, oil, and water-resistant coating. Exposure reported in previous studies highlighting potential concerns with public health. This study evaluated performance of coated paper packaging used for microwave popcorn, snacks, and sandwich bags for presence of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). Current paper packaging materials: seven popcorn bags and three snack and sandwich bags were analysed for PFOA and PFOS and compared to concentrations in microwave popcorn bags between 2005 and 2018. Only two microwave popcorn bags had average PFOA content above the limit of quantitation of 5.11 ng g

Bacterial Cellulose (BC) production from Fermented Rice Noodle Wastewater (FRNW) was fermented by Komagataeibacter sp. PAP1. In order to increase the production of BC, the FRNW-based medium was prepared and optimized for the cultivation of this bacterium. The optimized FRNW-based medium was composed of 5 % (w/v) mannitol, 0.1 % (w/v) beef extract, 0.5 % (v/v) ethanol, 1 % (v/v) acetic acid, pH 7.0 which were incubated at 30 °C for 10 days. Under these conditions, BC yielded 11.76 ± 0.34 g/L higher (4.40 fold) than the standard Hestrin-Schramm (HS) medium. The study on growth and BC production by Komagataeibacter sp. PAP1 in optimized culture condition showed that BC production by Komagataeibacter sp. PAP1 was growth-associated. The bacterial cell of Komagataeibacter sp. PAP1 increased exponentially from the 3rd to 5th day. The BC paper sheets produced using the obtained BC pellicle from an optimized FRNW-based medium gave higher mechanical strength than those from standard HS medium. This study reveals the use of FRNW as a substrate for BC production. The results indicated that FRNW, which is more environmentally friendly, can be used as an alternative low-cost substrate for BC production.

The condensation product (L) of 4,4′-methylenedianiline and p-anisaldehyde acts as colorimetric sensor for Cu2+ and Pb2+ ions. On interaction with Cu2+, ethanolic solution of L changes its color to brown while it becomes light pink on interaction with Pb2+. Interaction of Al3+ with L coated paper strip emits bright blue fluorescence. Metal ions like Mg2+, Cu2+, Li+, K+, Na+, Mn2+, Al3+, Hg2+, Co2+, Pb2+, Ni2+, Cd2+, Zn2+, Fe3+ do not interfere the paper strip sensor. The fluorescent intensity of L in ethanol is quenched 25 times by Pb2+ ion. The interaction between L and Pb2+ is reversible and the detection limit of Pb2+ is 10−6 M. The binding constant and stoichiometry of binding between L and Pb2+ was calculated to be 104.8 and 1:2. Theoretical calculations show that the binding of the metal ions to L are favorable and the fluorescence of L is due to π → π* transition.

The migration of five different photoinitiators from kraft paper to two fatty food simulants, Tenax(®) and 95% ethanol, was investigated under different conditions. The effects of temperature and storage time, as well as the physicochemical properties of the photoinitiators on migration, were discussed. Mathematical models based on Fick's second law generated from two cases, single- and two-side contacts, were applied to predict the migration behaviour from the paper to the food simulants. The partition coefficients estimated from the model decreased with temperature. The diffusion coefficients of the selected photoinitiators from the paper ranged from 1.55 × 10(-10) to 7.54 × 10(-9) cm(2) s(-1) for Tenax and from 2.79 × 10(-9) to 8.03 × 10(-8) cm(2) s(-1) for 95% ethanol. The results indicate that the applied model can predict the migration of photoinitiators in the initial short period before equilibrium, and the migration from paper to Tenax through a single-side contact demonstrated an especially high concordance.

Cellulosic insulation paper is usually used in oil-immersed transformer insulation systems. In this study, the molecular dynamics method based on reaction force field (ReaxFF) was used to simulate the pyrolysis process of a cellobiose molecular model. Through a series of ReaxFF- Molecular Dynamics (MD) simulations, the generation path of ethanol at the atomic level was studied. Because the molecular system has hydrogen bonding, force-bias Monte Carlo (fbMC) is mixed into ReaxFF to reduce the cost of calculation by reducing the sampled data. In order to ensure the reliability of the simulation, a model composed of 20 cellobioses and a model composed of 40 cellobioses were respectively established for repeated simulation in the range of 500–3000 K. The results show that insulating paper produced ethanol at extreme thermal fault, and the intermediate product of vinyl alcohol is the key to the aging process. It is also basically consistent with others’ previous experiment results. So it can provide an effective reference for the use of ethanol as an indicator to evaluate the aging condition of transformers.

This study investigated how various hemicellulosic fractions extracted from corncob, which have different chemical structures, affect paper strength properties when derivatized and used as paper strengthening agents. Four hemicellulosic fractions with different molecular weights and heteropolymer branching were extracted from corncob via a selective precipitation process; afterwards, the fractions were then chemically modified to obtain cationic hemicelluloses, which were used as strengthening agents for recycled pulp papermaking. These cationic hemicellulosic fractions improved the mechanical strengths of handsheets composed of recycled fibers and paper machine white water fines; however, the level of improvement was different among the fractions. Cationic hemicellulosic fractions showed a better improvement on the strength of handsheets without fines than that of the handsheets with fines. Especially, cationic hemicellulosic fraction obtained from 30% ethanol aqueous medium had the highest molecular weight and the highest substitution degree and thus showed the best enhancement in the mechanical strength of handsheets. Hence, this work demonstrates how to utilize hemicelluloses efficiently as strength agents for recycled pulp papermaking.

The sensing field has shed light on an urgent necessity for field-deployable, user-friendly, sensitive, and scalable platforms that are able to translate solutions into the real world. Here, we attempt to meet these requests by addressing a simple, low-cost, and fast electrochemical approach to provide sensitive assays that consist of dropping a small volume (0.5 μL) of off-the-shelf alcohols on pyrolyzed paper-based electrodes before adding the sample (150 μL). This method was applied in the detection of phosphate after the formation of the phosphomolybdate complex (250-860 nm in size). Prior drops of isopropanol allow for the fast penetration of the sample through pores of this hydrophobic paper, delivering hindrance-free redox reactions across increasing active areas and ultimately improving the detection performance. The sensitivity (-1.9 10-6 mA cm-2 ppb-1) and limit of detection (1.1 ppb) were improved, respectively, by factors of 33 and 99 over the data achieved without the addition of isopropanol, listing among the lowest values when compared with those results reported in the literature for phosphate (expressed in terms of the concentration of phosphorus). The approach enabled the quantification of this analyte in real samples with accuracies ranging from 87 to 103%. Furthermore, preliminary measurements demonstrated the successful performance of the electrodes with prior addition of other widely used alcohols, that is, methanol and ethanol. These results may extend the applicability of the method. In special, the scalability and eco-friendly character of the electrode fabrication combined with the sensitivity and simplicity of the analyses make the developed platform a promising alternative that may help to pave the way for a new generation of disposable sensors toward the daily monitoring of phosphate in water samples, thus contributing to prevent ecological side effects.

Conventional petroleum-based synthetic polymeric fiber filter materials for separation may cause secondary pollution to the environment due to their non-degradable properties. Herein, we report a facile method of preparation of a biodegradable composite filter that can achieve filtration for air by underlaying the commercialized cellulose paper towel under electrospun zein fibers. The morphology of zein fibers was successfully steered via varying the weight ratios of ethanol/deionized water mixture solvent, as a result, the round or flat ribbon fibers were obtained. The effect of zein fiber morphology on air filtration performance was investigated both experimentally and theoretically. It was found that the flat ribbon fiber filter had a higher filtration efficiency (99%) for PM0.3 removal and a lower pressure drop (109 Pa) compared with the round zein fiber filter. Notably, the as-prepared composite filter can be biodegradable easily, contributing to green ecological environment. This work shows an efficient way to develop biodegradable filtration materials with the cheap price, easy availability of component materials, exhibiting a great potential application in air filtration area.

Finding innovative solutions to manage waste and to expand the production of biofuels are some of the current challenges. Pulp and paper sectors, including recycled paper mills, produce a large amount of solid wastes, such as wastewater sludge containing non-recyclable short fibres. This study aimed to: (1) characterize recycled paper sludge; (2) define conditions for enzymatic hydrolysis and (3) evaluate two processes for ethanol production from the sludge: separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF). The waste showed a very high content of ash (58 %), which negatively affected enzyme action. A commercial enzyme cocktail (Cellic® CTec2) was used for the saccharification, at 43 °C and 6 % dosage. The highest ethanol yield (55.7 %) with shorter residence time (72 h) resulted from the SSF process. The best performance using the SHF process yielded 45.8 % after 84 h. Despite the intermediate results, sludge from pulp and paper mills could be an attractive raw material due to its low price and not requiring a pretreatment step for delignification. This application could be especially interesting for regions where the generation of paper sludge is high and the ethanol production capacity is still low, such as Asia.

In this study we investigated the technical feasibility of convert paper mill sludge into fuel ethanol. This involved the removal of mineral fillers by using either chemical pretreatment or mechanical fractionation to determine their effects on cellulose hydrolysis and fermentation to ethanol. In addition, we studied the effect of cationic polyelectrolyte (as accelerant) addition and hydrogen peroxide pretreatment on enzymatic hydrolysis and fermentation. We present results showing that removing the fillers content (ash and calcium carbonate) from the paper mill sludge increases the enzymatic hydrolysis performance dramatically with higher cellulose conversion at faster rates. The addition of accelerant and hydrogen peroxide pretreatment further improved the hydrolysis yields by 16% and 25% (g glucose / g cellulose), respectively with the de-ashed sludge. The fermentation process of produced sugars achieved up to 95% of the maximum theoretical ethanol yield and higher ethanol productivities within 9h of fermentation.

The Technical report discusses the design and economics of a cellulosic ethanol plant. The plant was designed to convert waste paper sourced from businesses and government facilities in need of a secure method for the deposal of documents. Additionally, the design also explores the use of acid hydrolysis to convert cellulosic fibers into fermentable glucose as a possible alternative pathway to enzyme hydrolysis. Converting cellulose into glucose is an additional step that must be performed when making ethanol from a cellulosic biomass rather than corn starch or cane sugar. This process is expensive due the dependency on expensive enzymes that must be constantly replaced in order to continue production. By exploring a possible alternative, the team hopes to find a cheaper solution to manufacturing of cellulosic ethanol. The project team used a combination of equations and simulation software to design a manufacturing plant capable of creating over 8.5 million gallons per year of cellulosic ethanol through the proposed pathway. Additionally, a profitability analysis was performed on the design to determine if creating cellulosic ethanol through this pathway should be further perused or abandoned in favor of alternative pathways. The STS research paper focuses on predicting the long term economic and environmental impacts of large-scale production of cellulosic ethanol. As the supply of oil is nearing depletion countries like the Unites States are investing in a variety of possible replacements such as biodiesel, electricity, hydrogen, and ethanol. These alternatives each have the possibility of being chosen as a primary replacement to fossil fuels, however before a decision is made it is imperative that the long-term effects of each choice is understood. Due to rising concerns of the impact climate change is having on the planet the for an environmentally sustainable fuel is paramount to making this decision. The research paper focuses on the environmental and economic impacts of cellulosic ethanol production and seeks to determine its suitability as a replacement for petroleum-based fuel in the United States. The technical and STS research papers are closely related due to this focus on cellulosic ethanol. The research paper focuses solely on the design and economics of one individual manufacturing plant. In contrast the STS research paper analysis the full process of cellulosic ethanol production from the growth and procurement of biomass to the release of greenhouse gasses when the fuel is combusted. Additionally, the Research paper tries to predict the possible impacts of large-scale production in the United States over an extended period of time. Together this research offers a more complete understanding of the production of cellulosic ethanol.

How can fossil fuel usage for powering automobiles be reduced? Climate scientists are in agreement that the transport sector must be decarbonized to help curb climate change, but society has no settled answer on how to achieve this goal. Current leading methods include biofuels and electric vehicles, in which both technical and political factors influence the debate. How can shredded paper be processed into an ethanol-based biofuel fit for use in automobile engines? A technically successful process was designed in which the shredded paper was broken down into glucose via acid hydrolysis and then fermented in a batch fermenter to ethanol. A single distillation column followed by a system of drying involving molecular sieves was utilized to separate ethanol from water to 99.5 percent purity. The process is energetically favorable with 85 percent of the heat of combustion of finished ethanol product needed to run the process equipment. However, the process is not economic without a very high government subsidy, concluding that shredded paper not be used as a feedstock for biofuel at this time. The biofuel lie: why Americans haven’t ditched the pump for the plug. Despite the clear advantages of electric vehicles over biofuels in reducing greenhouse gas emissions, the American public still views biofuels as viable alternatives. Biofuels are still viewed as viable despite scientific evidence to their inferiority because special interest groups, such as corn growers’ associations, lobby politicians for favorable legislation. These groups also heavily promote biofuels to the public, using slogans like “American grown” and “energy independence” to invoke emotions to support corn ethanol. Some even go as far to publish their own research that is partial to ethanol. Due to the powerful biofuel lobby, before making decisions, the public, politicians, and automakers should consider the stake that the authors of biofuel research and advertising have in the adoption of biofuels as the answer to the climate crisis.

Herein, to apply porous gold electrode for the electrooxidation of ethanol, we proposed a simple and facile method for the synthesis of paper-based porous gold (PAu) with large surface area using gold nanoparticles (AuNPs) and filter paper. The results showed that Pd/PAu exhibited a large electrochemical surface because of pore size of 100 nm and high electrochemical reaction compared to smooth Au foil and PAu. The as-prepared Pd/PAu electrode exhibited high activity and stability for ethanol electrooxidation in alkaline solution and was reusable even after 100 cycles.

How can the efficiency and sustainability of the United States transportation system be improved? Proposals to improve sustainability include conversion to electric-drive vehicles (EVs) and foregoing car dependency in favor of public transportation, cycling, and walking. These visions are sometimes incompatible with each other; in such cases, we must choose one to the exclusion of the others. Biofuels, including cellulosic ethanol and biodiesel, may offer more sustainable alternatives to petroleum fuels. Most current production of cellulosic ethanol uses corn stover or food byproducts as a sugar source; to avoid competition with the food industry and to take advantage of a currently unused sugar source, ethanol is produced from a mixed paper feedstock using hydrolysis, fermentation, distillation, and molecular sieving. An economic analysis of the plant design indicates it is [not] profitable as currently described; the price of ethanol produced could not compete with current gasoline prices. Opportunities for additional income include recovery and sale of byproducts, reduction of water demands, and increased energy efficiency. Interest groups are competing to influence the future of surface transportation in the United States. Proponents of autonomous vehicles (AVs), include tech companies and automakers, which seek regulations favorable to AVs from the U.S. Department of Transportation and the National Highway and Traffic Safety Administration. Opponents, including sustainability advocates, work to make cities more pedestrian friendly by promoting bicycles and scooters for transportation. Opponent groups also advocate for the use of public transportation to reduce the number of cars on American roads. Both those developing and regulating AVs must begin regulation now to ensure AVs are not a harmful technology.

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum-based liquid fuels. In this study, the feasibility of ethanol production from waste paper using the separate hydrolysis and fermentation (SHF) was investigated. Two types of waste paper materials, newspaper and office paper, were evaluated for their potential to be used as a renewable feedstock for the production of fermentable sugars via enzymatic hydrolysis of their cellulose fractions. Hydrolysis step was conducted with a mixture of cellulolytic enzymes produced locally by Trichoderma reesei Rut-C30 (cellulase-overproducing mutant) and Aspergillus niger F38 cultures. Surfactant pretreatment effect on waste paper enzymatic digestibility was studied and Triton X-100 at 0.5 % (w w(-1)) has improved the digestibility of newspaper about 45 %. The effects of three factors (dry matter quantity, phosphoric acid pretreatment and hydrolysis time) on the extent of saccharification were also assessed and quantified by using a methodical approach based on response surface methodology. Under optimal hydrolysis conditions, maximum degrees of saccharification of newspaper and office paper were 67 and 92 %, respectively. Sugars released from waste paper were subsequently converted into ethanol (0.38 g ethanol g(-1) sugar) with Saccharomyces cerevisiae CTM-30101.

Paper sludge is an attractive biomass source for the conversion to ethanol due to its low cost and the lack of severe pretreatment required. Four sludges from pulp and paper operations including both virgin kraft (VK) and recycled and deinking (RD) paper mills were analyzed. A fractionation process using a laboratory screen was utilized to produce a fiber-rich stream for enzymatic hydrolysis. This process removed 82-98 % of the ash with fiber yields from 39 to 69 %. Even though sludges in both non-fractionated and fractionated scenarios were pH-adjusted, total sugar conversion was still improved by 12-27 % by fractionation with 4.5 times less acid required for pH adjustment. Fermentation of the fractionated sludges showed very high ethanol yields. Acid insoluble clay adsorbs 3-5 mg enzyme per gram of clay depending on enzyme dosage. Acid soluble CaCO3 adsorbs about half of the enzyme compared to clay. Fractionation efficiency was also evaluated by testing different size mesh screen openings (100 to 500 mesh). The 400-mesh screen presented the best fiber yield, ash removal and ash fractionation ratio for both VK and RD sludges. The ash-rich streams have a lower C/N ratio than the original sludge which improves its suitability as soil amendment.

This study optimized the simultaneous saccharification and citric acid (CA) production from banana pseudostem (BP). Thereafter, kinetic assessment of Aspergillus brasiliensis growth and CA production were determined for the optimum conditions using fresh water (SSF

This work evaluates the environmental performance of using pulp and paper sludge as feedstock for the production of second generation ethanol. An ethanol plant for converting 5400 tons of dry sludge/year was modelled and evaluated using a cradle-to-gate life cycle assessment approach. The sludge is a burden for pulp and paper mills that is mainly disposed in landfilling. The studied system allows for the valorisation of the waste, which due to its high polysaccharide content is a valuable feedstock for bioethanol production. Eleven impact categories were analysed and the results showed that enzymatic hydrolysis and neutralisation of the CaCO3 are the environmental hotspots of the system contributing up to 85% to the overall impacts. Two optimisation scenarios were evaluated: (1) using a reduced HCl amount in the neutralisation stage and (2) co-fermentation of xylose and glucose, for maximal ethanol yield. Both scenarios displayed significant environmental impact improvements.

Bioethanol seems very potential to be an alternative energy substituting the fossil-based energy due to its renewable sources. Any sources containing carbohydrate (poly or mono) may be fermented into ethanol (bioethanol). This study aims to investigate the optimum conditions in the fermentation of used paper HVS hydrolysate to yield ethanol. The used paper HVS hydrolysate, produced from the hydrolysis of used paper HVS, was initially treated with a so-called detoxification stage to remove compounds hindering the fermentation process. The detoxification stage employed adsorptive separation with the aid of carbon (charcoal) activated with KOH and K2CO3 solution. The fermentation varied the types of microbes or yeast (i.e. Saccharomyces cerevisiae, Rhizopus oligosporus) and its concentration. Within the ranges of studied parameters, the optimum conditions to yield highest level of ethanol (0.436%) were activated carbon with KOH, yeast of Saccharomyces cerevisiae, and concentration of 3 g yeast/70 mL hydrolysate.

Herein, we report the first example of a paper-based screen-printed biosensor for the detection of ethanol in beer samples. Common office paper was adopted to fabricate the analytical device. The properties of this paper-based screen-printed electrode (SPE) were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy, and they were compared with the well-established polyester-based SPEs as well. Paper demonstrated similar properties when compared with polyester, highlighting suitability towards its utilization in sensor development, with the advantages of low cost and simple disposal by incineration. A nanocomposite formed by Carbon Black (CB) and Prussian Blue nanoparticles (PBNPs), namely CB/PBNPs, was utilized as an electrocatalyst to detect the hydrogen peroxide generated by the enzymatic reaction between alcohol oxidase (AOx) and ethanol. After optimizing the analytical parameters, such as pH, enzyme, concentration, and working potential, the developed biosensor allowed a facile quantification of ethanol up to 10 mM (0.058 %vol), with a sensitivity of 9.13 μA/mM cm2 (1574 μA/%vol cm2) and a detection limit equal to 0.52 mM (0.003%vol). These satisfactory performances rendered the realized paper-based biosensor reliable over the analysis of ethanol contained in four different types of beers, including Pilsner, Weiss, Lager, and alcohol-free. The proposed manufacturing approach offers an affordable and sustainable tool for food quality control and for the realization of different electrochemical sensors and biosensors as well.

The feasibility of cellulase recycling in the scope of bioethanol production from recycled paper sludge (RPS), an inexpensive byproduct with around 39% of carbohydrates, is analyzed. RPS was easily converted and fermented by enzymes and cells, respectively. Final enzyme partition between solid and liquid phases was investigated, the solid-bound enzymes being efficiently recovered by alkaline washing. RPS hydrolysis and fermentation was conducted over four rounds, recycling the cellulases present in both fractions. A great overall enzyme stability was observed: 71, 64 and 100% of the initial Cel7A, Cel7B and -glucosidase activities, respectively, were recovered. Even with only 30% of fresh enzymes added on the subsequent rounds, solid conversions of 92, 83 and 71% were achieved for the round 2, 3 and 4, respectively. This strategy enabled an enzyme saving around 53-60%, while can equally contribute to a 40% reduction in RPS disposal costs., The authors acknowledge the financial support of the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684) and the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462). The financial support of FCT through GlycoCBMs Project PTDC/AGR-FOR/3090/2012–FCOMP-01-0124-FEDER-027948 and the PhD grant to DG (SFRH/BD/88623/2012) is equally acknowledged. The authors also thank RENOVA (Portugal) for kindly providing the recycled paper sludge.

For transformers in service, aging markers from cellulose in oil such as furans, water, methanol and acids are measured for diagnostic purposes. The content of these indicators, measured in oil, may therefore vary with load, temperature, solid and liquid insulation aging, as well as marker stability and evaporative loss. Correction factors estimating the level of the aging marker to a reference temperature would make the diagnostic more relevant. In this study, correction factors for temperature differences have been estimated for different aging markers in insulation systems impregnated with either mineral oil or synthetic ester. In the case of mineral oil based systems, we observe correction factors for water, methanol and furans in line with previously reported findings. On the other hand, for the synthetic ester system, novel correction factors for water and methanol are suggested while for furans, no temperature dependence was observed.

We developed a convenient method by coupling frontal elution paper chromatography with desorption corona beam ionization mass spectrometry (DCBI-MS) for rapid determination of chlorphenamine added in herbal medicines or dietary supplements. In this method, the ethanol extract of the herbal products was spotted directly onto an isosceles triangular filter paper sheet, and then the paper sheet was developed under strong elution condition with the sample zone migrating at the solvent front. The analyte was finally condensed at the V-shaped tip which could then be placed under the visible plasma beam of DCBI for ionization. The overall procedure took less than 5 min. The frontal elution paper chromatography on a triangular plate used in this work improved the signal intensity of chlorphenamine by 30-fold due to the analyte condensing at the tip and the reduction of the background suppression. Furthermore, the paper sheet also functioned as a filter in the analysis of solid or powder samples, which can increase the analytical throughput by omitting the step of centrifugation. The proposed method in current study was successfully applied in the determination of chlorphenamine in herbal medicines. Chlorphenamine was detected in four of the twelve types of herbal medicines examined in this study. The limit of detection was 200 ng/mL (2.0 ng absolute) in full-scan positive-ion mode and the linear range was from 5.0 μg/mL to 50 μg/mL with satisfactory linear coefficient (R(2) (the square of the correlation coefficient)=0.895). Good reproducibility was achieved with relative standard deviations (RSDs) less than 15.0% and the recoveries of chlorphenamine ranged from 84.3 to 90.6%.

In this study, a facile and effective route to prepare hybrid photocatalysts (paper-TiO

Pulping and papermaking of Leucaena diversifolia by soda-anthraquinone-ethanol was studied using an experimental design in order to investigate the effects of cooking variables: temperature, time, soda concentration, ethanol concentration and wash-disintegrate temperature on the pulp yield and the physico-chemical characteristics of paper sheets (tensile index, burst index, tear index and brightness). Previously, in order to assess the potential of plants of this raw material grown over short periods, its results were compared with those of other leucaena varieties and the best crop among three grown for 1–3 years was selected. The results were evaluated using the response surface methodology with a view to identifying the most suitable operating conditions. In accordance with biomass production and the features of the raw materials and cellulose pulp obtained, the L. diversifolia grown for 2 years was found to be the most suitable choice for obtaining pulp and paper among the five leucaena varieties examined. Suitable physical characteristics of paper sheets (tensile index, burst and tear index) and acceptable yield pulping and brightness could be obtained by operating at medium temperature, active alkali concentration, pulping time, ethanol concentration and wash-disintegrate temperature.

A new analytical platform based on the use of thin-layer chromatography (TLC) coupled with paper-based analytical device (PAD) was developed for the determination of total capsaicinoids in chilli samples. This newly developed TLC-PAD is simple and low-cost without any requirement of special instrument or skillful person. The analysis consisted of two steps, i.e., extraction of capsaicinoids from chilli samples by using ethanol as solvent and separation of capsaicinoids by thin-layer chromatography (TLC) and elution of capsaicinoids from the TLC plate with in situ colorimetric detection of capsaicinoids on the PAD. For colorimetric detection, Folin-Ciocalteu reagent was used to detect phenolic functional group of capsaicinoids yielding the blue color. The blue color on the PAD was imaged by a scanner followed by evaluation of its grayscale intensity value by ImageJ program. This newly developed TLC-PAD method provided a linear range from 50 to 1000 mg L−1 capsaicinoids with the limit of detection as low as 50 mg L−1 capsaicinoids. The proposed method was applied to determine capsaicinoids in dried chilli and seasoning powder samples and the results were in good agreement with those obtained by HPLC method.

Primary sludge from a Portuguese pulp and paper mill, containing 60% of carbohydrates, and unbleached pulp (as reference material), with 93% of carbohydrates, were used to produce ethanol by simultaneous saccharification and fermentation (SSF). SSF was performed in batch or fed-batch conditions without the need of a pretreatment. Cellic® CTec2 was the cellulolytic enzymatic complex used and Saccharomyces cerevisiae (baker's yeast or ATCC 26602 strain) or the thermotolerant yeast Kluyveromyces marxianus NCYC 1426 were employed. Primary sludge was successfully converted to ethanol and the best results in SSF efficiency were obtained with S. cerevisiae. An ethanol concentration of 22.7 g L−1 was produced using a content of 50 g L−1 of carbohydrates from primary sludge, in batch conditions, with a global conversion yield of 81% and a production rate of 0.94 g L−1 h−1. Fed-batch operation enabled higher solids content (total carbohydrate concentration of 200 g L−1, equivalent to a consistency of 33%) a...

Based on the Fick’s law, model about the migration of silver-loaded zeolite on antibacterial kraft paper was built, and migration of antibacterial agent in distilled water, 65 % ethanol and 4 % acetic acid at 2 h、24 h、96 h、240 h、480h、720h and 960 h under 40 °C were detected by AAS. The predicted and experimental results were compared using MATLAB software. The results are shown that the turns of migration in different foodstuff are that 65 % ethanol>4 % acetic acid>distilled water, while silver ion is not detected in olive oil and N-hexane. The migration in distilled water, 65 % ethanol and 4 % acetic acid can be well fitted with the predicted model, and the migration in 4 % acetic acid is similar with the model’s result in certain period of time, and migration of antibacterial agent from papers to food stimulants in different effective migration coefficient, depth of paper and time can be greatly predicted with.

This work examined the simultaneous saccharification and fermentation (SSF) process for the biological conversion of pulp & paper sludge (PPS) and monosodium glutamate waste liquor (MGWL) into ethanol using Saccharomyces cerevisiae CICC 1001 in batch condition. At the SSF conditions of sterilization, pH 6.0, 6% TS (total solid), and adding nutrient solution, the highest ethanol yield of 42.5 g L−1 was obtained at the enzyme loading of 40 A.U. (activity unit) g−1 VSfed (volatile solid); only if the pH value was changed to 4.5, the ethanol yield reduced by 47%; only if the TS concentration was changed to 3%, the ethanol yield decreased by 11%; only if the substrates were not sterilized, 5% decrease occurred to the ethanol production; only if no nutrient solution was added to the reactor, 97% reduction of ethanol yield happened; the extent of influence of the impact factors ranked in the order of nutrient solution > pH > TS concentration > sterilization. The Fourier Transform Infrared (FTIR) spectra of substrates after SSF further verified the results of process performances. Therefore, this SSF of PPS and MGWL reduced the residue streams and land-filling costs while benefiting in ethanol production.

The characterization of cellulases is complex and has gained increasing importance due to the application of cellulases in finishing of textile fibres and the conversion of lignocellulose into second generation ethanol. Usually two or three different substrates such as filter paper Whatman No. 1, carboxymethylcellulose and avicel are used to characterize total, endo (EG) and exoglucanase (ExG) activity, respectively, and assays are carried out without any mechanical agitation. Unfortunately, the different activities obtained are not directly comparable and do not reflect cellulase behaviour in industrial applications, mainly due to physic-chemical differences between the substrates and the adopted procedures. In this study the pH profiles of three different cellulase preparations from Hypocrea jecorina (former Trichoderma reesei) have been characterized with modified filter paper assays which permitted the distinction between EG and ExG activities using a single insoluble substrate. Furthermore, the influ...

The simultaneous saccharification and co-fermentation (SSCF) kinetic model described in the companion paper can predict batch and fed batch fermentations well at solids concentrations up to 62.4 g/L cellulose paper sludge but not in batch fermentation at 82.0 g/L cellulose paper sludge. Four hypotheses for the discrepancy between observation and model prediction at high solids concentration were examined: ethanol inhibition, enzyme deactivation, inhibition by non-metabolizable compounds present in paper sludge, and mass transfer limitation. The results show that mass transfer limitation was responsible for the discrepancy between model and experimental data. The model can predict the value of high paper sludge SSCF in the fermentation period with no mass transfer limitation. The model predicted that maximum ethanol production of fed-batch fermentation was achieved when it was run as close to batch mode as possible with the initial solids loading below the mass transfer limitation threshold. A method for measuring final enzyme activity at the end of fermentation was also developed in this study.