Search

Mitigation of global warming, energy security and industrial competitiveness urge the energy-intensive pulp and paper industry (PPI) to transform energy use practices. This study investigates how the PPI has responded to the need for the energy transition in the 2000s. Finland and Sweden as forerunners of energy-efficient operation and decarbonization of the PPI are used as target countries. Understanding of changes in energy consumption is complemented using decomposition analysis (Logarithmic Mean Divisia Index Method) and the energy efficiency index approach. Analysis of companies’ investments in energy technologies is used for explaining changes in energy production. Evidence of significant development towards the more sustainable operation of the PPI was found. Energy consumption per produced unit has decreased, i.e., energy efficiency has improved. Fossil fuels have been partially replaced with bio-based alternatives. Thus, the CO2 intensity has decreased substantially. The generation of renewable electricity has increased in both countries. Examples of Finland and Sweden indicate that the PPI has great potential to contribute to CO2 emission reduction worldwide in the future as energy efficiency can be further improved, and the share of fossil fuels can be decreased increasing the use of biofuels and self-generated green electricity at least in kraft pulp mills.

The objective of this research was to conduct studies of the influence of the sizing complexes dimensions and rosin sizing methods proceeding in the modes of homocoagulation and heteroadagulation on the temperature regime of paper and cardboard drying. The drying regime ensures the sintering and melting processes of coarse (existing technology) and fine (developed technology) sizing complexes with the formation of a hydrophobic film on the surface, responsible for such values indicators for glued types of paper and cardboard, as the degree of sizing by the bar method and absorbency with onesided wetting. Coarse electroneutral sizing complexes gauged 4200-6000 nm are formed in the second phase of electrolyte coagulation of hydrodispersions of modified rosin (HMR). The ratio of HMR : electrolyte is 1: 3. The rosin sizing process takes place in the mode of homocoagulation, since such complexes are not able to distribute evenly and adhere firmly to the surface of the fibers and the hydrophobic film formed of them is heterogeneous in thickness and area. Fine sizing complexes have a size of 180-220 nm and an electrokinetic potential from +30 to +50 mV. They are peptized particles formed from coagulates (2000 nm), first formed in the first area of electrolyte coagulation of HMR, when the ratio of HMR : electrolyte (first batch) is 1 : 1, and then subjected to further disaggregation (peptization) into the presence of peptide ions Al3+, introduced into the pulp with the second portion of the electrolyte in a ratio of 1 : 0.8. It has been established that reducing the size of sizing complexes from 4200–6000 to 180–220 nm due to the shift of the rosin sizing process from the homocoagulation mode to the heteroadagulation mode helps to reduce energy consumption in the drying part of paper-making and cardboard-making machines by 2-3 % or more. This process is facilitated by lowering the temperature of not only the last 4-6 drying cylinders located at the end of the second group - from 130 to 115-120 °C, but also the first 2-4 drying cylinders of the third group - from 115 to 100-105 °C.

The advancement in plastic and plastic based products in last two decades has imposed a serious threat to the environment. This has led to an increase in the demand for sustainable and biobased products. Paper and paper products are good alternatives to their plastic counterparts. A key element of paper industry is the raw material (wood, bamboo and nonwood agricultural residues such as bagasse, straws etc.) from which pulp is produced. The pulp is then utilized for production of paper. There are many pulping processes to prepare pulp of various qualities. For fine grade pulp, chemical pulping is used. The chemical pulp is produced by soda, kraft and sulphite pulping processes. However, for newsprint grade pulp, stone ground wood (SW), thermomechanical (TMP), chemi-thermomechanical (CTMP), chemi-mechanical (CMP) or refiner mechanical (RMP) corresponding pulping processes are employed. The method of pulp preparation (pulping process) consumes large amount of energy and chemicals. A new pulping process with electron irradiation using biowaste (bagasse) as a raw material is discussed in this work. Bagasse pulping process is found to reduce about 50% of energy consumption during pulping process. The process is referred to as ‘ECTMP’ (Energy Efficient Chemi-Thermo Mechanical Pulping). The paper produced from aforesaid method also reflected no loss of strength properties with respect of TMP reference pulps. Henceforth, preliminary calculation based on experimental results shows that the proposed bagasse ECTMP process explored the scope of energy savings of the order of 50%.

The paper drying process has the highest level of energy consumption in the pulp and paper production process. Analysis and optimization of the energy system during the paper drying process is critical for improving the energy efficiency of the entire paper mill. In the existing model for the paper drying process, the solution requires accurate boundary conditions such as the air temperature and humidity of the pocket area and the cylinder surface temperature, which are very difficult to obtain in the papermaking process. This can result in significant deviations between the model solution and the actual production process. This paper focuses on the single-tier dryer cylinder-based paper drying process that has been widely used with high-speed papermaking machines in recent years. A mathematical model is proposed based on real-time data. The verification via industrial production demonstrates that the proposed model is reliable for the paper drying process. Based on the simulation results, two optimization operations have been proposed. The energy consumption decreases from 1.51 t steam/t paper to 1.44 t steam/t paper, 4.6% of the steam and 1.26 × 106 RMB can be saved for a medium-scale paper mill with the annual production capacity of 105 t paper.

Euroresinas produces different types of resin-impregnated paper at their factories. After the paper goes through the resin bath, it undergoes a drying process which is a fundamental step in the process. Although the temperature is controlled by a heating system, the actual values inside the chain of dryers are only measured at a few points away from where the paper is. The company would like to be able to model the temperature profile inside the dryers to better understand problems such as dusting and sticking, as well as the optimization of different variables related to bathing and drying times and energy consumption.

In this paper the optimal surface area of an air-to-air plate heat exchanger is determined. The analysis is based on input data obtained by measurement in real operating conditions in board producing paper machine in Belgrade, Serbia. For that purpose effectiveness-NTU method together with previously defined cost functions was applied, taking into account seasonal variations in the parameters of exhaust and fresh atmospheric air. In addition, the total net savings in the consumption of primary energy sources in the factory that can be achieved by applying an optimised system for the use of waste heat were calculated and a simple payback period of the investment was determined.

Paper and pulp manufacturing industry produces versatile products from renewable feedstock that are easily recycled. It is the fourth largest industrial sector in terms of energy use. Much of the energy used comes from biomass derived fuels or high efficiency combined heat and power plants so the industry is not considered as carbon intensive. But at production paper making emits five times the CO2/tonne of steel; this is gradually removed from the atmosphere by the growth of replacement trees which can take between 7 and 90 years. This study reviewed existing literature to establish estimates for future energy requirements, and way that these could be met with minimum carbon emissions in a world where there are electricity grids with low carbon intensities, high recycling rates and growing demand for sustainable biomass. It was found that energy consumption could be reduced by 20% using technologies that have been demonstrated at an industrial scale. Most virgin pulp is made using the kraft chemical processing method. It was found that it should be possible to eliminate all fossil fuel use from this process, by combustion of by-product while exporting a small amount of electricity. Recycled paper is becoming the largest source of pulp. In this case the waste streams cannot provide sufficient energy to power the process, but process heat can be produced by burning some of the collected waste paper in steam plants or by using electric heat pumps. The energy needed to produce high quality office paper is nearly twice that required for non-deinked packaging paper. This couples with the lower pulp yields obtained with high quality pulp means that the environmentally preferred option for energy supply to the recycling process is dependent on the grade of pulp being produced.

Green Energy efficiency is becoming more important because of the resulting cost reduction and image of green society which helps to enhance competitiveness in a globalized green market. Pulp and paper manufacturing is a large-scale industry which is generally regarded as important for national development. The Pulp and Paper industry consumes approximately 2.5% of total industrial energy consumption in Thailand by 44 factories distributed throughout the country. Therefore, energy efficiency improvement can play a significant role in the industry. Investigations of the cost effectiveness of energy efficiency measures and technologies using bottom-up Conservation Supply Curve (CSC) in the pulp and paper mill process are required. This study examines the concept, methodology, and the usefulness of the energy conservation supply curve, and the potential to create the appropriate energy policies to the Thai Pulp and Paper Industry.

We examine the efficiency of Brazilian pulp and paper companies in the production of pulp and bioelectricity using an output-oriented data envelopment analysis. We assume that pulpwood volume, energy consumption, installed capacity and number of workers are the inputs to generate pulp and bioelectricity. We conduct this analysis by first determining the traditional efficiency scores, and secondly calculating a composite index of efficiency to rank the performance of pulp and paper companies. We also conduct a post-efficiency analysis to gauge the impacts of externalities and other related variables on the efficiency in pulp and bioelectricity production. Our results suggest that pulp and paper companies are efficient in pulp and bioelectric production, reaching an average efficiency and composite index of efficiency of 0.9776 and 0.8291, respectively. The post-efficiency analysis suggests that pulp and paper companies could minimally decrease their adjusted efficiencies by increasing the total forest area, power capacity, and outsourced employment. On the other hand, the adjusted efficiency in the production of pulp and bioelectricity might not be statistically impacted by higher socioeconomic levels.

The last decade has witnessed an impressive paradigm shift in practically all networking fields: from hardware-based appliances to software-based infrastructures. Network functions traditionally hard-coded in the network devices have been redesigned in software and deployed in virtualized networking scenarios, with impressive advantages in terms of management flexibility and upgradable capability. Still, at a time in which we strive for more and more network processing and computing resources, such a softwarization process risks to bring about a severe toll in terms of performance and energy consumption. We believe, and posit, that programmable hardware architectures tailored for supporting high performance network processing tasks may come to the rescue. With this position paper, after motivating our position, we further briefly review the past and present of programmable hardware for networking, and we discuss its possible evolution towards more comprehensive "higher layer" HW-accelerated processing tasks.

With the global energy crisis and environmental pollution intensifying, tissue papermaking enterprises urgently need to save energy. The energy consumption model is essential for the energy saving of tissue paper machines. The energy consumption of tissue paper machine is very complicated, and the workload and difficulty of using the mechanism model to establish the energy consumption model of tissue paper machine are very large. Therefore, this article aims to build an empirical energy consumption model for tissue paper machines. The energy consumption of this model includes electricity consumption and steam consumption. Since the process parameters have a great influence on the energy consumption of the tissue paper machines, this study uses three methods: linear regression, artificial neural network and extreme gradient boosting tree to establish the relationship between process parameters and power consumption, and process parameters and steam consumption. Then, the best power consumption model and the best steam consumption model are selected from the models established by linear regression, artificial neural network and the extreme gradient boosting tree. Further, they are combined into the energy consumption model of the tissue paper machine. Finally, the models established by the three methods are evaluated. The experimental results show that using the empirical model for tissue paper machine energy consumption modeling is feasible. The result also indicates that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The experimental results show that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The mean absolute percentage error of the electricity consumption model and the steam consumption model built by the extreme gradient boosting tree is approximately 2.72 and 1.87, respectively. The root mean square errors of these two models are about 4.74 and 0.03, respectively. The result also indicates that using the empirical model for tissue paper machine energy consumption modeling is feasible, and the extreme gradient boosting tree is an efficient method for modeling energy consumption of tissue paper machines.

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations.

Non-linear programming optimization method was used to optimize total steam and air consumption in the dryer section of multi-cylinder fluting paper machine. Equality constraints of the optimization model were obtained from specified process blocks considering mass and energy balance relationships in drying and heat recovery sections. Inequality constraints correspond to process parameters such as production capacity, operating conditions, and other limitations. Using the simulation, the process parameters can be optimized to improve the energy efficiency and heat recovery performance. For a corrugating machine, optimized parameters show the total steam use can be reduced by about 11% due to improvement of the heat recovery performance and optimization of the operating conditions such as inlet web dryness, evaporation rate, and exhaust air humidity, accordingly total steam consumption can be decreased from about 1.71 to 1.53 tonnes steam per tonne paper production. The humidity of the exhaust air should be kept as high as possible to optimize the energy performance and avoid condensation in the pocket dryers and hood exhaust air. So the simulation shows the supply air should be increased by about 10% to achieve optimal humidity level which was determined about 0.152 kgH2O/(kg dry air).

International audience; An energy audit is a primary step toward improving energy efficiency at the facility level and ensuring a clean production. The pulp and paper sector is one of the most energy-intensive industries in Morocco. This article aimed at identifying energy conservation opportunities at a Small and Medium-sized paper industry. The audit results together with their financial viability are presented regarding the analysis of energy consumption and electrical quality issues. The paper introduces an action plan for a more efficient energy use of some specific applications such as furnaces and compressed-air installations as well. The recommended energy efficiency measures have the potential of saving about 347.85 MWh of electrical energy and 101.78 MWh of thermal energy corresponding to reductions of 11.48% and 2.22%, respectively. The total investments related to the application of the action plan is approximately 290.53 kMAD and the global payback period does not exceed one year. It was also shown that a total quantity of 283.39 t of CO2 emissions can be saved annually.

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry.

Currently, paper consumption is globally increasing and at an unsustainable level. However, traditional paper production could release excessive greenhouse gas emissions or wastewater, resulting in environmental contamination. To make the result more visual and persuasive, this study takes Time magazine as an example to analyze the impacts of the papermaking process on the environment. This study analyzes energy consumption from several sectors in the paper industry, carbon dioxide emissions, and discharge of condensed wastewater to show current consumption during traditional pulp and paper production. Results show that the papermaking process would consume a lot of electricity during the pulp preparing, pulp condition, pulp preparation, manufacture paper with pulp, and pulp processing stages. Meanwhile, various degree of carbon emissions is generated based on the physical and chemical changes in materials during the papermaking process. Two kinds of wastewater, including black and white liquor, are produced in the papermaking process. Several countermeasures are suggested to achieve a low consumption and sustainable development of the pulp and paper industry to solve these environmental problems. The suggestion includes the surrogate of electronic paper, carbon capture and storage, and wastewater recycling.

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO2 emissions. CH4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry.

The paper industry is heavily using energy during all the phases of the manufacturing process. This is especially the case in Nordic mills where pressure ground wood is the source of fiber. The purpose of this case study is to show how energy consumption behaves on a monthly basis in a Finnish paper mill that has several paper machine lines. The research examines different categories of energy usage, as well as the overall costs. The results show that the monthly energy usage varies significantly. The electricity consumption of the case mill is rather steady, but there is significant monthly variation in steam and natural gas consumption. Moreover, steam and electricity unit costs increased significantly when coming to the end of the research period. The longitudinal case data shows that it is difficult to enhance energy consumption per produced unit at the paper mill. One reason for this is the bleak demand outlook for the end products, which often result in downsizing and closing operations inside the integrated unit.

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years.

The pulp and paper industry accounts for approximately 5% of total industrial energy consumption and contributes 2% of direct carbon dioxide (CO2) emissions from industries. World paper and paperboard demand and production are increasing significantly, leading to an increase in this sector's energy use and CO2 emissions. Although current studies identify a wide range of energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is limited or scattered regarding new energy-efficiency technologies that are not yet fully commercialized. Development of emerging or advanced energy-efficiency technologies and their deployment in the market will be crucial for this industry's mid- and long-term energy saving and climate change mitigation strategies. This paper compiles available information on energy savings, environmental and other benefits, costs, and commercialization status for 25 emerging technologies to reduce the energy use and CO2 emissions. The purpose is to provide a well-structured comprehensive review on these emerging energy-efficiency technologies for engineers, researchers, investors, policy makers, pulp and/or paper companies, and other interested parties.

The papermaking industry always causes many disastrous problems to humans, such as energy consumption, environmental pollution and destruction to the ecosystem. However, paper is not only one kind of life's necessities but also a necessity of the office. But the service life of paper is reduced easily because of the invasion of water. Here we creatively prepared one kind of multifunctional inner and outer uniform-superhydrophobic paper by the secondary use of waste paper inspired by nature and traditional papermaking knowledge, which not only has a great water proof ability for various liquids, but also has wonderful self-cleaning, anti-fouling and oil absorption abilities. It is worth mentioning that superhydrophobic recycled paper still has good writability, suppleness, foldability and tailorability to meet our daily needs. Unique outer and inner uniform-superhydrophobicity make this paper able to tolerate any degree of abrasion. This groundbreaking work will not only avoid harm by the water invasion and expand the usable range of paper, but also it will ease the energy and environment crisis.

The paper industry is the industry with the third highest energy consumption in the European Union. Using recycled paper instead of fresh fibers for papermaking is less energy consuming and saves resources. However, adhesive contaminants in recycled paper are particularly problematic since they reduce the quality of the resulting paper-product. To remove as many contaminants and at the same time obtain as many valuable fibres as possible, fine screening systems, consisting of multiple interconnected pressure screens, are used. Choosing the best configuration is a non-trivial task: The screens can be interconnected in several ways, and suitable screen designs as well as operational parameters have to be selected. Additionally, one has to face conflicting objectives. In this paper, we present an approach for the multi-criteria optimization of pressure screen systems based on Mixed-Integer Nonlinear Programming. We specifically focus on a clear representation of the trade-off between different objectives.

Pulp and paper production, an energy-intensive process, is among the main light industries contributing to energy saving and pollution emission reduction in China. The improvement of energy efficiency is essential for energy consumption and sustainable development. This study analyzes the negative factors in the pulp and paper sector by calculating energy efficiency from the lengthways time and investigating the gap between China and foreign countries through a horizontal comparison. Accordingly, energy efficiency has increased in the Chinese pulp and paper industry with years of efforts, but its transformation remains unclear. Furthermore, the energy-saving potential, energy cost saving, and carbon dioxide emission reduction in the pulp and paper industry are evaluated according to the Twelfth Five-year Plan (2011–2015). The results show that the pulp and paper industry has further capabilities for energy-saving and carbon dioxide emission reduction by improving energy efficiency in China, resulting in great economic benefit. In brief, new technology and energy structure adjustment are long-term strategies for energy conversation, with changes in the scale of mills expected to provide huge opportunities to improve energy efficiency in China within a short period.

Reduction of water pollutant emissions and energy consumption is regarded as a key environmental objective for the pulp and paper industry. The paper develops a bottom-up model called the Industrial Water Pollutant Control and Technology Policy (IWPCTP) based on an industrial technology simulation system and multiconstraint technological optimization. Five policy scenarios covering the business as usual (BAU) scenario, the structural adjustment (SA) scenario, the cleaner technology promotion (CT) scenario, the end-treatment of pollutants (EOP) scenario, and the coupling measures (CM) scenario have been set to describe future policy measures related to the development of the pulp and paper industry from 2010-2020. The outcome of this study indicates that the energy saving amount under the CT scenario is the largest, while that under the SA scenario is the smallest. Under the CT scenario, savings by 2020 include 70 kt/year of chemical oxygen demand (COD) emission reductions and savings of 7443 kt of standard coal, 539.7 ton/year of ammonia nitrogen (NH4-N) emission reductions, and savings of 7444 kt of standard coal. Taking emission reductions, energy savings, and cost-benefit into consideration, cleaner technologies like highly efficient pulp washing, dry and wet feedstock preparation, and horizontal continuous cooking, medium and high consistency pulping and wood dry feedstock preparation are recommended.

Pulp and paper industry is a highly energy intensive and the drying section of the paper machine consumes 64 % of total energy. The heat of the humid hot air resulting from the drying process has a usable energy potential which has to be recovered and represents a secondary energy resource. This paper analyses efficiency of introducing a complex heat recovery, in three stages, integrated into the drying process of the paper production technology line. The type of recovery used is an interior recuperation in the first and third stage due to the fact the energy contained by the secondary energy resources, namely the heat of the exhausted hot air from the drying process, is recovered within the process itself. In the second stage, the secondary energy resource has an energetic potential since it is used to maintain the microclimate in the industrial hall. The performed energy analysis is leading to conclusions regarding the methodology for establishing the optimal regime of operation.

Straw pulp in China, which is the world's largest producer of this material, suffers from water and energy shortages during its entire life cycle. However, limited systematic studies have focused on these issues, and decision makers need be provided with improvement methods for the environmental performance. Thus, an impact-oriented energy and carbon coupled water footprint analysis was conducted in this study based on ISO standards. Results showed that the impact of energy consumption and carbon emissions exceeded that of water footprint. Carcinogens, non-carcinogens, and freshwater ecotoxicity also played effective roles in improving the environmental performance. Optimizing key indirect processes, including chemicals production, steam preparation, electricity generation, wood pulping, and fertilizer recovery, dominated the reduction in environmental burdens. Direct freshwater consumption and wastewater disposal played additional effective roles in controlling water footprint. The water network was thus optimized by a water pinch analysis to decrease the freshwater consumption and pollutant emissions by maximum values of 91.5% and 99.7% after optimization, respectively. Meanwhile, carbon dioxide, methane, chromium, arsenic, mercury, titanium, copper, strontium, total nitrogen, total phosphorus, BOD5, and COD were the main pollutants. Overall, the environmental impact can be further reduced by diminishing coal power ratio in national energy structure, adopting recovered steam, and considering multistage regeneration water network to cope with different water use demands.

Paper drying is a highly energy-intensive and complicated multivariate process. The dryer section plays an important role in the energy consumption of a paper machine, especially of thermal energy. A comprehensive method for assessing the energy performance of the dryer section was investigated in this study to improve energy efficiency. This method was divided into three component processes: energy and evaporation load audit, field test and observation, and energy flow analysis and energy efficiency estimation. In a case study, we found that the method could, in addition to analyzing the key factors that restrict drying efficiency, also depict the details of energy consumption clearly. At the same time, several significant energy-saving measures were suggested to improve the energy efficiency of the paper-drying process.

As one of the typical high‐polluting and high‐energy‐consuming industries in China, the paper industry's environmental behavior has become the focus of a range of stakeholders, policy makers, and the whole society because the industry's business activities are a main source of environmental pollution and contribute to massive energy consumption. This study used a qualitative approach to examine the relative importance of external and internal pressures (EP and IP) in driving the environmental behavior of paper enterprises in China. Based on grounded theory, this study aimed to examine the EP and IP on the environmental behavior of paper enterprises to create a comprehensive theoretical model based on grounded theory code analysis. It was found that government pressure, economic pressure, social pressure, and IP have direct and significant positive effects on the corporate environmental behavior (CEB) of paper enterprises in China. Furthermore, government, economic, and social pressures have indirect and significant positive effects on CEB through other pressures. Finally, the paper concludes with a discussion of these four pressures and provides policy implications.

Paper as a consumer product offers a undisputed benefits to human society, and it has been proven to be critical in driving most sensitive needs of mankind—principally in areas of security, education, sanitation, and communication—and thus has been produced and consumed worldwide. Its sustainable production and usage is one topic that has featured prominently in many discussion fronts and more often than not ends with recommendations for an alternative source of raw material, improvement in production procedures, and ecological concerns. Paper use is an ecological concern that has triggered many paper intervention actions around the world such as the Paper Task Force in USA, Sustainable Paper Alliance in China, and Paper and Beyond in Europe. In Nigeria, however, challenges associated with paper production, consumption, and economic prospects have not been adequately tackled. This is conspicuously evident in the huge volume of paper products imported annually into the country as a result of unsustainable local production. The cumulative impact of these issues reflect negatively on the Nigeria’s paper industry and spread indirectly to the entire country’s economy in terms of high capital freight spent on importation, volatile product price, and loss of employment opportunities. This work sought to review the challenges and opportunities associated with raw material sources, energy and water consumption, environmental pollution, paper consumption, and disposal of used paper products in Nigeria. The current review also advocated for wastepaper as a variant of raw material with a sustainable potential.

Internet-of-Things (IoT) devices can only afford very small batteries due to the size, weight, power and cost constraints. On the other hand, long battery life is expected for such devices, either for improving user experience or due to charging limitations. Therefore, it is critical to reduce the energy consumption of IoT devices. A good opportunity is to save energy on the system level, by letting the system to sleep occasionally. In this paper, we introduce Image Partitioning and Incremental Loading (IPIL), an operating-system-level sleep mechanism used in Huawei LiteOS to reduce the energy consumption of an IoT device. IPIL powers off both the CPU and the main memory during sleep to save as much energy as possible. Thus, system data have to be reloaded after the system wakes up, which may take a long time and thus reduce real-time responsiveness. To solve this problem, IPIL partitions the system image into clusters and incrementally loads the clusters on-demand, reducing the amount of data loading and time overhead in the wake-up step. Experimental results show that IPIL outperforms two widely adopted sleep approaches in terms of energy consumption. At the same time, IPIL offers satisfactory responsiveness with very short wake-up delay. We also present a case study on smart watch to demonstrate how battery life, as a core value of wearable devices, can be improved with IPIL provided by LiteOS.

A key challenge in prevention of global warming is how to increase energy efficiency, to be able to deal with increased fossil CO2 emissions from rising energy usage. Increasing energy efficiency will decrease energy usage and is in a key role in emission mitigation. The focus is the pulp and paper industry, which is energy-intensive. Development of industrial energy efficiency has been studied before but the role of industrial transformation is still mostly unknown. The knowledge must be improved, to be able to predict future developments in the most effective way. In this research, impact of various production unit closures and start-ups on energy efficiency of the Finnish pulp and paper industry were studied utilizing statistical analysis. Results indicate that about 20% of the Finnish pulp and paper industry energy efficiency improvement between 2011 and 2017 is caused by the major structural changes. The rest, 80% of the progress, was mainly due to improved technology and more optimal operational modes. Additional findings suggest that modern mill start-ups have a significantly greater potential to reduce energy consumption than old mill closures.

In the context of global climate change, energy conservation and greenhouse effect gases (GHG) reduction are major challenges to mankind. The forestry-pulp and paper industry is a typical high energy consumption and high emission industry. We conducted in-depth research on the energy flows and carbon footprint of the forestry-pulp paper industry. The results show that: (1) The main sources of energy supply include external fossil fuel coal and internal biomass fuel black liquor, which supply 30,057,300 GJ and 14,854,000 GJ respectively, in addition, the energy produced by diesel in material transportation reaches 11,624,256 GJ. (2) The main energy consumption processes include auxiliary engineering projects, material transportation, papermaking, alkali recovery, pulping and other production workshops. The percentages of energy consumption account for 26%, 18%, 15%, 10% and 6%, respectively. (3) The main sources of carbon include coal and forest biomass, reaching 770,000 tons and 1.39 million tons, respectively. (4) Carbon emissions mainly occur in fuel combustion in combined heating and power (CHP) and diesel combustion in material transportation, reaching 6.78 million tons and 790,000 tons of carbon, respectively. (5) Based on steam and electricity consumption, the indirect carbon emissions of various thermal and electric energy production units were calculated, and the key energy consumption process units and hotspot carbon flow paths were further found. This research established a theoretical and methodological basis for energy conservation and emission reduction.

The purpose of this study was to assess the environmental impacts of the Norwegian pulp and paper industry, considering the production of pulp fibres and printing paper. The pulp fibres included in this study are thermo-mechanical pulp and kraft pulp fibres, which differ with respect to the energy consumption and chemicals used during production. The assessed paper grades were super-calendered paper and newsprint. The study was a cradle to gate approach, and corresponds to an attributional life cycle assessment (LCA). The LCA was based on data collected from main pulp and paper producers in Norway. Importantly, aspects related to the increasing use of mineral fillers in the production of newsprints were assessed. The results showed that a reduction of more than 18% climate change impact (kg CO2 eq.) was achieved by increasing the fraction of fillers, in the newsprint furnish. Furthermore, the total climate change impact reduction depended on the applied energy mix. Assuming that the production of printing paper was based only on Norwegian energy mix, yielded a reduction of the climate change impact by more than 44% in 2011, compared to the production based on Scandinavian and European energy mix. Additionally, the input and output transport contributed to more than 20% impact in several cases. We thus concluded that the estimated environmental impacts were affected by; i) the furnish composition of a given paper quality, ii) the input and output transport and iii) the use of different primary grid energy sources.

In 2017, a carbon emissions trading market will be launched nationwide by the China government. Calculating the enterprise carbon emissions is an important prerequisite and basis for trading. This paper discussed types of greenhouse gases, calculation boundaries and methods, energy consumption, carbon emissions, and intensity of a representative integrated pulp and paper mill in China based on China Guidance and Greenhouse Gas Protocol Tools. The results showed that there were 435,000 tonnes (t) of CO2 emissions from that mill in 2014 that did not contain emissions of biomass energy, which was 8 times higher than that of fossil energy. The pulp carbon intensity based on the mill was 0.230 t CO2/Adt, which accounted for 7.50% to 57.4% in other pulps’ based on the product. Intensity based on Gross Domestic Product (GDP) was 1.090 t CO2e/1000 USD and accounted for 56.8% intensity in the China paper industry. The intensity based on sales accounted for 52.6% in the first-class enterprise in the developed country. It also showed that intensity was influenced by the species of raw material, energy, and products, which provided the mill with measures for energy saving and emissions reduction to obtain the redundant carbon emissions in the trading.

With the advent of the Paris Climate Agreement and China ratifying it recently, there is a need to adopt a diversified approach to address climate change; this is especially the case of promoting residential energy conservation. This study is one of the first household energy intervention studies that focuses on the comparison of two message delivering means, paper-based versus instant messaging tool, as a platform for sharing energy-saving tips and engaging households to save energy in China. Conducted in several communities in Hangzhou, Zhejiang Province of China, the effectiveness of using a widely used application known as WeChat in promoting household energy conservation is compared with that of using stickers. It was found that WeChat is the most effective is reducing monthly consumption, but the effects are short-lived. Comparatively, using stickers as a mean of engaging households produces more sustained results in terms of energy savings. This study also provides evidence to correlate the changes in energy consumption behavior with personal perception of one’s responsibility and quality of life. That is, certain behavior can be triggered if residents are willing to impose energy ration in their households or are given more opportunities in the form of local programs that enable them to have more practices in energy conservation.

Employee's green behavior plays a pivotal role in reducing waste in the environment and sustaining the natural resources for the next generation. It is also significant in scientific labs due to the substantial energy consumption and waste generated in labs. Based on the existing literature, this paper re-caps the definitions of green behavior in workplace stated by various researchers. Scales developed by previous researchers to measure the employee's green behavior are discussed in this paper.

Energy consumption for residential use in Malaysia is keep increasing yearly in order to maintain the internal thermal comfort of the building. Roof insulation material plays a vital role in improving the thermal comforts of the building while reduce the cooling load of the building. Oil palm industry in Malaysia had grown aggressively over the past few decades. Tons of oil palm waste had produced during the process such as empty fruit bunch fiber. Another waste material that available and easy to obtain is paper. Paper is a valuable material that can be recycled. Waste paper comes from different sources such as newspaper, office and printing papers. This study will take advantage of the available resources which could contribute to reduce the environment impact. The aim of this study is to investigate the thermal performance of roof insulation materials using mixture of oil palm fiber and paper pulp with different ratio and thickness. This study found that the thermal performance of the paper pulp is slightly better compare to the oil palm fiber. Thermal conductivity of the particle board reduces around 4.1% by adding the 10% of paper pulp into the total density of the particle board. By adding 75% of paper pulp, the thermal conductivity of the particle board could be reduced to 24.6% compare to the oil palm fiber board under the similar condition. Therefore, from this study, it could be concluded that paper pulp has high potential to be used as a building insulation material.

This paper presents a case study with regard to using a low cost low power sensor network to save energy in paper machines. By using wireless sensors for measuring temperature and humidity in the dryer section of a paper machine it is possible to optimize energy consumption by adjusting heating and air flow. Because the sensors need to be battery powered with the data sent almost in real time for monitoring purposes, a low power network technology is needed, in this case ZigBee. A prototype installation with a small number of sensors was set up, running over a period of six weeks. First results show an ad hoc optimization and energy savings of some 80.000 € per year for a single machine.

The objective of this paper is to estimate the energy saving potential in China's paper industry by determining energy intensity under different scenarios. Cointegration model and stability test are applied to formulate the equilibrium equation. Results show that energy price, industry structure, profit margin and technology have significant impact as they are negatively correlated to changes in energy intensity. Three scenarios (BAU (business as usual), intermediate and active) are designed to estimate the future trend of energy intensity in paper industry. In 2010, the energy intensity (energy consumption per unit of value added) was 4 tce/10,000 RMB, and by the scenarios it is expected to considerably decline. According to the BAU (business as usual) scenario, the energy intensity will decrease to 2.56, 1.43 and 0.70 tce/10,000 RMB by 2015, 2020 and 2025, respectively. With respect to the intermediate scenario it is expected to drop further to 0.44 tce/10,000 RMB. Yet by the active scenario, the energy intensity is expected to considerably decline to 0.36 tce/10,000 RMB by 2025. Using the BAU forecast as a baseline, the quantity of energy savings is estimated to be 185.6 billion tce by 2025. Considering this important potential, we also provided some policy suggestions.

Under the dual pressure of energy consumption and environmental pollution, mankind hopes to develop clean and renewable alternative energy, and the rapid development of fuel cells meets people's demand for energy-efficient power systems. The emergence of portable micro energy systems represented by microfluidic fuel cells, such as paper-based microfluidic fuel cells, has greatly enriched the means of medical detection to better cope with the threat of disease transmission. In this work, the numerical simulation method is innovatively introduced to study the paper-based microfluidic fuel cells. Both transient and steady-state modes are employed to demonstrate the whole operation process of the paper-based microfluidic fuel cell. In addition, the different structural parameters, including electrode spacing, the distance between electrode and inlet, channel thickness, and electrode length, are also investigated their influence mechanisms on cell performance. Results show that the increase of most structural parameters decreases cell output power in different degrees. Even on the premise that increasing channel thickness has a positive impact on the output power, the fuel utilization still shows a downward trend. These conclusions provide theoretical support and reference for future optimization work and accelerate the development of microfluidic fuel cells.

Intermittent systems enable continuous and accumulative process execution under constraint or unstable power supply. To enable intermittent computing, process status and data are typically checkpointed from volatile memory (VM) to nonvolatile memory (NVM) before running out of power. After power resumes, these logged data can be loaded back from NVM to VM for continuous execution. Nevertheless, existing approaches rarely considered the energy consumed during moving data and may waste precious power resource over data movement, instead of computation. Such observation motivates us to propose an energy-reduction on-chip memory management (ERCM2) scheme to utilize the high cell density and non-volatility of SpinTransfer Torque RAM (STT-RAM) for enabling a hybrid on chip memory architecture. The experimental results show that the proposed scheme can achieve the access performance close to conventional SRAM-based on-chip memory architecture with lower energy consumption.

A static energy model was developed to describe the conventional paper drying process for a multicylinder paper machine. The model is based on the mass and energy balance relationships written for fiber, steam, air, and water. With the purpose of developing a clear understanding of the paper drying process and evaluating its drying performance, the model developed was made up of seven basic blocks according to the technical art of paper drying. In this work, a multicylinder newsprint machine was chosen to illustrate the energy model. The module schematic and instructions are presented first, followed by mathematical descriptions for each block. In addition, paper drying models are reviewed. The specific drying rate, specific heat consumption, and energy efficiency are introduced to evaluate the drying performance. Experiments were conducted to measure the operating parameters and the newsprint drying process was simulated based on the model. A Sankey diagram is also presented. The results are compared wit...

Pulp and paper mills receive much attention from environmentalist and authority due to their impact on natural resources, particularly in water and energy consumption. Many research works have been reported for water and energy savings for the pulp and paper mill. However, none of them were targeted at the brown stock washing system (BSWS), where significant water and energy are consumed to perform pulp cleaning and black liquor concentration. This paper presents an optimization model aiming for simultaneous water and energy saving for BSWS in the pulp and paper mills. A mixed integer non-linear programming (MINLP) model has been developed to optimize the water network design. The synthesized water network results in significant reduction in energy and water consumption. Sensitivity analysis is performed to analyse the relationship between washing efficiency and utilities (water and energy) consumption.

This paper aims to empirically examine the relations between energy consumption, R&D costs and capital expenditures on the profitability of manufacturing companies in the paper and allied industry. The main focus in this article is on the companies, which are operating in the manufacture of pulp from wood and the paper production industry. Multiple regression analysis was used to test if the energy consumption, R&D costs and capital expenditures significantly predict EBITDA profitability. The results of the regression analysis indicated that all used predictors explained (R2) 35.7% of the company profitability variance (R2 = 0.357, F (3; 80) = 14.82, p-value < 0.01). The performed regression analysis also shows that energy consumption has a significant contribution to the profitability of the company. The results also indicate that only energy consumption explains 12.1% of the profitability variance (R2 = 0.121, F (1; 101) = 13.86, p-value = 0.01). The results of the regression analysis show that EBITDA profitability will increase by about 3.7 · 10–7% for each 1 000 GJ energy consumed.

To improve energy efficiency of a Paper & Pulp industry, full capacity utilization of the processing equipment and diverse energy source utilities are promoted, while same time processing of diverse raw materials, meeting of strict processing time requirements, seamless material flow and obtaining required product quality are important concerns to be fulfilled. This is similar to a resources management problem while energy is considered as one of the measurable resources, wherein estimation of energy consumptions is crucial/complicated aspect. Discretized form of energy consumption (approximate energy consumed by unit amount of intermediate products at different intermediate processing stages) concept is utilized here with discrete event simulation for consumed energy estimation/analysis. The research deals with a real time working Paper & Pulp industry resource management problem, wherein overall energy consumption rate and production rate were analyzed for some commonly occurring situation of efficiency reduction of the processing station(s). Energy efficient solutions are evaluated with varying production flow (varying the percentage of raw material) and resources management options (turning on/off paper machines). Energy efficient solution which ensures minimum loss in production rate and minimizes disturbances in material flow is suggested for implementation.

Much research has been focused on maintaining stable humidity conditions in buildings housing heritage collections while reducing energy use. Moisture buffering by collections themselves can have a marked effect on the stabilisation of relative humidity (RH), the key parameter for preservation. Modelling of moisture transport using COMSOL Multiphysics was applied to transform three-dimensional paper and wooden objects into their one-dimensional representations, without changing the moisture uptake and release characteristics. The results were coupled to the modelling of indoor microclimate and energy consumption in collection storage spaces with the use of WUFI ® Plus software. The study revealed the crucial impact of air exchange rate of the building on the stability of indoor RH and the humidification and dehumidification loads required to maintain it. In the adequately air-tight library store, a sizeable paper collection was found to reduce the RH fluctuations from ±9% to ±6% around the yearly average and the energy consumption due to the humidification and dehumidification load by 38% when compared with the empty space, for a high-quality climate control scenario. In turn, a wooden collection, occupying a realistic fraction of a museum store was not large enough to significantly narrow down the RH variations and reduce the energy consumption.

Industrial sector is the largest user of energy in India and in many parts of the world. The pulp and paper industry accounted for 6% of total global industrial energy consumption, being the fourth largest energy consumer worldwide. For India, energy audit of a paper carton manufacturing unit was earlier reported with the following results. The specific electrical and thermal energy consumption was estimated as 91.85 kWh/ton and 1619 MJ/ton paper respectively. Annual energy saving potential was found to be 5.9% of the total annual energy consumption. With a view to identifying energy conservation and CO2 mitigation opportunities in writing, tissue, and craft paper production, this article presents energy auditing of a paper industry (Orient Paper Mills) in Amlai, Shahdol, Madhya Pradesh, India. The specific energy consumption of the typical paper industry in India was evaluated as 34.3 GJ per ton paper and specific CO2 emissions as 3.4 tons CO2 per ton paper. Some energy conservation opportunities for this industry were identified with significant energy saving (nearly 3.5%) and money saving potential with payback periods not exceeding 2 years in general.

Resources metabolism problems are the main reason resulting in the eco-environmental impacts of industrial system.Material flow analysis is a methodology that focuses on tracking and quantifying a substance or substance group as it moves through a system and is the primary tool used to understand the metabolic processes of anthropological activity.Based on analyzing the resources metabolism of the pulp and paper industry in Wuhan by the methodology of MFA,an analysis indicator system was built,which included four aspects: resources input,resources consumption,environmental stress and circular symbiosis.The fuzzy comprehensive evaluation method and the problem tree model were used to evaluate metabolism of raw materials,water,and energy of the pulp and paper industry in Wuhan.Five grades were included: excellent,good,moderate,bad and very bad.The results were compared with the national average level in 2007.The results showed that the evaluation grade of resources metabolism of the pulp and paper industry in Wuhan is excellent,while it is still slightly lower than the national average level.When evaluating the resources metabolism separately by resources input,resources consumption,environmental stress and circular symbiosis,we found that:(1) The grades of the ecological efficiency of raw material input,energy input and water input were excellent,good and excellent respectively;(2) The grade of the energy consumption per unit product was good,and that of the water consumption per unit product and the raw material consumption per unit product were excellent;(3) the grades of the output value per unit pollutant and the pollutant emission per unit product were excellent,and the grade of the compliance rate of pollution emission was good;(4) The grade of the proportion of cleaner production was good,and that of the pollution treatment and the sustainable utilization of resources were excellent,but that of reuse water rate was bad. Based on the resources metabolic analysis for the pulp and paper industry in Wuhan,we can draw some conclusions as follows:(1) The problems on energy consumption,water consumption and pollution discharge mainly arise from pulp and paper production,suggesting great potentials on reduction of energy and water consumption and pollution emission in these processes.(2) Comparing with national average level,the use rate of the wastepaper pulp is higher and that of the wood pulp is lower.(3) The ecological efficiency of the energy input and the energy consumption per unit product are below the national average level,and the proportion of cleaner production is also below the reference value.They all should to be improved.(4) There is great potential for improvement in reuse of water resource. This study demonstrates the use of resources metabolism analysis approach we posed before,and highlights the need for the evaluation standard and database for analysis of the resources metabolism for industrial ecosystems.

China is the largest paper producer and consumer in the world. However, China's paper industry is inefficient in its consumption of natural resources. Whereas the proportion of wood pulp used by the paper industry in developed countries is up to 63%, the corresponding figure for China is only 23%, leading to high energy and water consumption and severe environmental pollution. This article presents a systematic risk analysis using life cycle assessment and carbon footprint calculation associated with China's straw-pulp and wood-pulp paper industries. Risk prevention measures are proposed based on the results of this analysis. The study has important ramifications for the sustainable development of China's paper industry.