Search

Aristotle is often named as the first zoologist or biologist because of his writings on animals. Although Aristotle’s major intention in these books was to illustrate his ideas of how knowledge and understanding might advance, at least one modern biologist (C. Darwin) has recognized Aristotle's depth and breadth as being of surviving merit. Of greater surprise is the ongoing attention that his works continue to receive, including publications in contemporary scientific journals. This review identifies 38 peer-reviewed papers on various topics from Aristotle’s biological writings that have been published during the last 50 years. These papers are described according to content (genetics, population biology, anatomy, brain, movement), specific creatures (fish, scorpions, elephants, insects, birds), publication outlet, distribution over the fifty year period surveyed, and visible trends in the topics studied. It is concluded that, in the highly-competitive field of peer-reviewed scientific publication and citation, Aristotle's biology continues to excite the interest of scientists and remains salient to modern science itself.

Bookkeeper, the most widely used deacidification process based on MgO particles, was systematically evaluated on two sets of nonvaluable historical paper samples. Established analytical methods, such as pH and alkaline reserve determination, were used, as well as SEM EDS analyses to evaluate the distribution of Mg-rich particles on the paper surface and in the cross-section of the paper. The degradation rate constants of untreated and deacidified paper samples after accelerated thermal degradation were calculated based on weight average molecular mass determination to evaluate the lifetime extension of paper. The efficiency factors determined after accelerated thermal degradation of untreated and treated paper showed that paper lifetime prolongation after Bookkeeper deacidification treatment is highly limited for most of the investigated paper samples. No correlation was found between the alkaline reserve content or the pH and the degradation rate constants of the deacidified paper samples, but the paper degradation rate correlated with the paper samples pH before deacidification treatment. SEM EDS analysis showed that Mg-rich particles remained on the paper surface, which explains the limited effectiveness of the treatment. Graphical abstract

Research on academic paper ranking has received great attention in recent years, and many algorithms have been proposed to automatically assess a large number of papers for this purpose. How to evaluate or analyse the performance of these ranking algorithms becomes an open research question. Theoretically, evaluation of an algorithm requires to compare its ranking result against a ground truth paper list. However, such ground truth does not exist in the field of scholarly ranking due to the fact that there does not and will not exist an absolutely unbiased, objective, and unified standard to formulate the impact of papers. Therefore, in practice researchers evaluate or analyse their proposed ranking algorithms by different methods, such as using domain expert decisions (test data) and comparing against predefined ranking benchmarks. The question is whether using different methods leads to different analysis results, and if so, how should we analyse the performance of the ranking algorithms? To answer these questions, this study compares among test data and different citation-based benchmarks by examining their relationships and assessing the effect of the method choices on their analysis results. The results of our experiments show that there does exist difference in analysis results when employing test data and different benchmarks, and relying exclusively on one benchmark or test data may bring inadequate analysis results. In addition, a guideline on how to conduct a comprehensive analysis using multiple benchmarks from different perspectives is summarised, which can help provide a systematic understanding and profile of the analysed algorithms.

Hypochlorous acid (HClO), the core bactericidal substance of the human immune system, plays a vital role in many physiological and pathological processes in the human body. In this work, we designed and synthesized a novel deep-red fluorescent probe TCF-ClO for the determination of hypochlorous acid through theoretical analysis. The results showed that probe TCF-ClO exhibited excellent characteristics of long-wavelength emission (635 nm), fast response ( 1 min), and low detection limit (24 nM). In addition, it had been successfully used for imaging of HClO in living HeLa cells. More importantly, the TCF-ClO composited paper-based sensing material was successfully constructed. The RGB/gray value was obtained from a mobile phone and computer, which could achieve the quantitative detection of HClO, with a linear detection range of 0-50 μM and a detection limit of 1.09 μM (RGB mode)/3.38 μM (gray mode). The function of the paper-based sensor extended from qualitative to quantitative detection of HClO, and it is expected to become a portable device widely used in the environmental area.

Purpose To study respiratory effects of exposure to soft paper dust exposure, a relationship that is rarely studied. Methods Soft tissue paper mill workers at a Swedish paper mill were investigated using a questionnaire and lung function and atopy screening. Spirometry without bronchodilation was performed with a dry wedge spirometer, and forced vital capacity (FVC) and forced expiratory volume in 1 s (FEV1) were obtained and expressed as percent predicted. Exposure to soft paper dust was assessed from historical stationary and personal measurements of total dust, in addition to historical information about the work, department, and production. The impact of high exposure to soft paper dust (> 5 mg/m3) vs. lower exposure ≤ 5 mg/m3, as well as cumulative exposure, was analyzed using multiple linear regression models. Multivariate models were adjusted for smoking, atopy, gender, and body mass index. Results One hundred ninety-eight current workers (124 male and 74 female) were included. There were significant associations between both cumulative exposure and years of high exposure to soft paper dust and impaired lung function. Each year of high exposure to soft paper dust was associated with a 0.87% decrease in FEV1 [95% confidence interval (CI) − 1.39 to − 0.35] and decreased FVC (− 0.54%, 95% CI − 1.00 to − 0.08) compared to the lower exposed workers. Conclusions The present study shows that occupational exposure to soft paper dust (years exceeding 5 mg/m3 total dust) is associated with lung function impairment and increased prevalence of obstructive lung function impairment.

This study performs a chemical investigation of blood plasma samples from patients with and without fibromyalgia, combined with some of the symptoms and their levels of intensity used in the diagnosis of this disease. The symptoms evaluated were: visual analogue pain scale (VAS); fibromyalgia impact questionnaire (FIQ); Hamilton anxiety rating scale (HAM); Tampa Scale for Kinesiophobia (TAMPA); quality of life Questionnaire—physical and mental health (QL); and Pain Catastrophizing Scale (CAT). Plasma samples were analyzed by paper spray ionization mass spectrometry (PSI-MS). Spectral data were organized into datasets and related to each of the symptoms measured. The datasets were submitted to multivariate classification using supervised models such as principal component analysis with linear discriminant analysis (PCA-LDA), successive projections algorithm with linear discriminant analysis (SPA-LDA), genetic algorithm with linear discriminant analysis (GA-LDA) and their versions with quadratic discriminant analysis (PCA/SPA/GA-QDA) and support vector machines (PCA/SPA/GA-SVM). These algorithm combinations were performed aiming the best class separation. Good discrimination between the controls and fibromyalgia samples were observed using PCA-LDA, where the spectral data associated with the CAT symptom achieved 100% classification sensitivity, and associated with the VAS symptom achieved 100% classification specificity, with both symptoms at the moderate level of intensity. The spectral variable at 579 m/z was found to be substantially significant for classification according to the PCA loadings. According to the human metabolites database, this variable can be associated with a LysoPC compound, which comprises a class of metabolites already evidenced in other studies for fibromyalgia diagnosis. This study proposed an investigation of spectral data combined with clinical data to compare the classification ability of different datasets. The good classification results obtained confirm this technique is as a good analytical tool for the detection of fibromyalgia, and provides theoretical support for other studies about fibromyalgia diagnosis.

Industrial process heat decarbonization through electrification could contribute significantly to climate change mitigation efforts. In the US industry, thermal processes accounted for more than two-thirds of the total final energy demand in 2021. Cross-cutting electrification technologies like industrial heat pumps are suitable for the process heat supply to several industrial unit operations in a sustainable way while also improving overall energy efficiency. This study employs a bottom-up approach to investigate the techno-enviro-economic potentials of deploying high-temperature and steam-generating heat pumps in US textile, pulp and paper, and automotive sectors in different timeframes. The results show that the annual technical potential energy and CO2 savings by electrifying heat supply are 310 PJ (or 36% of the projected energy demand) and 28 MtCO2 (or 71% of the projected CO2 emissions) in 2050 respectively, however, these incur additional costs in each sector (ranging between 5 and 18 $/GJ). The required heating capacity of industrial heat pumps is estimated at 15 GW, which translates roughly into a market of over 6000 heat pump units and an investment volume of $7 billion in the studied processes. Although there may be individual cost-effective opportunities for electrifying heat supply in specific industrial sites, the overall costs are estimated to be high in the three industrial sectors due to the large disparity between electricity and natural gas prices and low heat source temperatures. To overcome the identified techno-economic barriers, comprehensive action plans for different stakeholders are also given. This study provides novel insights that should inform policymakers’ and executives’ decisions about the electrification of the current and future US industrial heat supply in relevant industrial sectors.

The use of standardized imaging protocols is paramount in order to facilitate comparable, reproducible images and, consequently, to optimize patient care. Standardized MR protocols are lacking when studying head and neck pathologies in the pediatric population. We propose an international, multicenter consensus paper focused on providing the best combination of acquisition time/technical requirements and image quality. Distinct protocols for different regions of the head and neck and, in some cases, for specific pathologies or clinical indications are recommended. This white paper is endorsed by several international scientific societies and it is the result of discussion, in consensus, among experts in pediatric head and neck imaging.

Abstract Tissue paper softness relies on two major factors, the bulk softness, which can be indicated by the elasticity of the sheet, and surface softness. Measurement of surface softness is complicated and often requires a multi-step process. A key parameter defining surface softness is the topography of the surface, particularly the crepe structure and its periodicity. Herein, we present a novel approach to measure and quantify the tissue paper surface crepe structure and periodicity based on the detection of waviness along the sample using laser scanning confocal microscopy (LSM) and X-ray tomography (XRT). In addition, field emission scanning electron microscope (FESEM) was used to characterize the tissue paper surface. We demonstrate that surface topography is directly correlated to the erosion of the doctor blade, which is used to remove the dry tissue paper from the Yankee cylinder. Because of its accuracy and simplicity, the laser confocal microscopy method has the potential to be used directly on the production line to monitor the production process of the tissue paper. XRT revealed more structural details of the tissue paper structure in 3D, and it allowed for the reconstruction of the surface and the internal structure of the tissue paper. Graphic abstract

A superhydrophobic paper with excellent robustness was fabricated by roll coating with modified nano-TiO2. First, nano-TiO2 particles were hydrophobically modified by γ-aminopropyltriethoxysilane and 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (POTS). Then the paper coating composed of modified nano-TiO2 particles as pigments and epoxy resin (EP) as adhesives was coated on a paper surface to create the desired surface morphology and surface energy. Compared with the uncoated filter paper, the prepared paper showed an improved rough surface morphology owing to the uniform layer of TiO2 microclusters deposited on the fiber network. The superhydrophobic paper exhibited water contact angles (WCA) about 153° ± 1.5°, and water sliding angles (WSA) about 3.5° ± 0.5°, low surface adhesion and excellent bounce ability. The superhydrophobic paper can withstand a variety of wear and tear, such as tape stripping and knife scraping. The as-prepared superhydrophobic paper showed mechanical durability even after 20 wear cycles with sandpaper,thus sustaining excellent superhydrophobicity on the filter paper surface. Moreover, it remains fully functional even in environments with high concentrations of acid and alkali for 96 h. The superhydrophobicity was not affected after storage for 6 months in a natural environment. It was confirmed that the superhydrophobic paper surface exhibited excellent chemical stability, long-term stability and self-cleaning properties. The entire production process was operated under normal environment, without complex equipment; and, as such, has the possibility for large-scale production and application in industry.

A method for treating cellulose paper using the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) was developed. The treatment was intended to reform the paper structure. Filter paper was immersed in 20 g of molten [BMIM]Cl at 80 °C for 20–80 s and then washed with ethanol and distilled water. The treated paper was then immersed in tert-butyl alcohol before drying in a freeze dryer for 30 min. Next, polyethylene glycol (PG) and trichloromethylsilane were fixed to freeze-dried paper. The paper treated with [BMIM]Cl had a higher specific surface area than that not treated with [BMIM]Cl, and the specific surface area increased as the treatment time increased. The amount of PG fixed to the paper increased as the specific surface area of the paper increased, and PG improved moisture retention. The degree to which the moisture retention was improved was therefore related to the increase in the specific surface area caused by [BMIM]Cl treatment. Addition of trichloromethylsilane to the paper treated with [BMIM]Cl improved the hydrophobicity, and this was caused by the [BMIM]Cl treatment. Overall, [BMIM]Cl treatment was effective for reforming the paper structure and this improved the amount of functional material that could be fixed to the paper.

In the present analysis, a new experimental pilot plant system for exploring resin-impregnated paper (RIP) bushing technology was conducted. Experimental and numerical studies were carried out on the resin infusion and impregnation processes in the paper condenser core of a RIP bushing. An innovative approach for the molding process (named molding method B) of a commercial RIP bushing was implemented. For this method, the homogeneity of the paper winding process was controlled precisely. The filling process was conducted by gravity due to the difference of heights between two vacuumed chambers and from bottom to top in the mold. The flow front position and infusion time were measured experimentally and used to obtain the axial permeability of the paper condenser core analytically and numerically. The results indicate that the molding methods have a significant effect on the RIP bushing quality, homogeneous filling, and impregnating process time. Also, it was found that homogeneity of the paper winding process and, consequently, uniform axial velocity of resin flow in the radial direction is the most effective factor to eject the air. Finally, it was recognized that the determination of axial permeability in the case of transient flow is novel in comparison with conventional procedures such as Darcy relation of steady flows. By decreasing the paper thickness from 0.3 to 0.2 mm, the permeability decreased from 8.84 × 10−10 to 4.52 × 10−10 m2. The microstructure of the core illustrates that the axial permeability of the crepe paper condenser core is considerably affected by the variation of the paper thickness.

Filter paper-based optical sensors (FPOS) offer rapid and sensitive quantification of analytes. Herein we report, a simple, sensitive, selective and low-cost FPOS for Th(IV) determination. Filter paper strips, impregnated with Morin reagent are reacted with Th(IV) yielding an intense yellow complex whose RGB (red/green/blue) color intensities made the basis of the assessment. A plot of the blue channel color absorbance versus Th(IV) concentration was linear up to 4.0 µg mL− 1 with a detection limit of 0.1 µg mL− 1. The proposed method was accurate, precise and reliable for analyzing complex certified rock samples in excellent compliance with the certified values.

A novel paper-based capacitance mast cell sensor has been designed and developed for real-time monitoring of the major peanut allergen Ara h 2. In this study, we created the 3D paper chip printed with carbon electrodes as a non-contact capacitance sensing platform. To improve the conductivity and biocompatibility of the cellulose paper, a polyvinyl alcohol (PVA)-gelatin methacryloyl (GelMA)-nano-hydroxyapatite (nHAP) composite hydrogel (PGHAP gel) was employed to fabricate the prepared paper chip. When rat basophilic leukemia mast cells (RBL-2H3) are immobilized and cultured in the 3D culture system consisting of PGHAP gel and paper fibers, identification signals of Ara h 2 could be specifically monitored non-contact and real-time by capacitance change measurement. This 3D structure combined with time-lapse monitoring completes the capacitance cell sensor. Results indicate that Ara h 2 has given a remarkable decrease to the capacitance in dose-dependent range from 0.1 to 100 ng/mL. Therefore, the real-time cell allergic response could be accurately monitored by this low-cost, disposable cell sensor, which supplies a novel and effective pathway for the rapid and accurate evaluation for food allergens.

We present a high resolution, ultra-frugal printing of paper microfluidic devices using in-house paraffin formulation on a simple filter paper. The patterns printed using an office inkjet printer formed a selective hydrophobic barrier of 4 ± 1 µm thickness with a hydrophilic channel width of 275 µm. These printed patterns effectively confine common aqueous solutions and solvents, which was verified by solvent compatibility studies. SEM analysis reveals that the solvent confinement is due to pore blockage in the filter paper. The fabricated paper-based device was validated for qualitative assessment of Candida albicans (pathogenic fungi) by using a combination of L-proline β-naphthylamide as the substrate and cinnamaldehyde as an indicator. Our studies reveal that the pathogenic fungi can be detected within 10 min with the limit of detection (LOD) of 0.86 × 106 cfu/mL. Owing to its simplicity, this facile method shows high potential and can be scaled up for developing robust paper-based devices for biomarker detection in resource-limited settings. Graphic abstract

The literature has several studies on the addition of several agglomerating materials, waste, natural and artificial fibers, among others. Most of them aim to improve soil engineering properties. Certain studies combine this investigation with the environmental issue, that is, the issue of making the best use of a certain material that is discarded in nature and generates a significant environmental impact. Thus, this study aims to use paper fiber, from the cement bag, which is a construction waste, as reinforcement of a sandy soil and a clayey soil. Fiber-reinforced soil is considered an effective technique for soil improvement due to cost, adaptability, and reproducibility. Thus, the choice was to study the fiber of natural multifoliated kraft paper (NKP) as soil reinforcement, which was added randomly at the percentages of 5, 10, and 15% of dry soil mass. This study focused on soil resistance and its behavior with the addition of NKP fibers to a sandy soil (SC) and to a clayey soil (ML). Compaction, shear strength, and unconfined compression tests were performed in samples with the fiber contents mentioned. The results of the tests showed an improvement and an increase in the friction angle of the soils when 10% and 15% of fibers were added to the SC, and for ML, a significant increase in the friction angle was found in both optimum moisture and 28 days, with emphasis on 5% dosage and flooded for 15% dosage. Regarding the unconfined compression, an improvement was verified in the resistance at 10% for the CS, while for ML soil, the better dosage was 5% of fibers. One concludes that the use of NKP fibers can be considered a reinforcement material. The results indicated that the fibers made the soils ductile, able to maintain shear strength at high levels of strain.

Wearable devices have received tremendous interests in human sweat analysis in the past few years. However, the widely used polymeric substrates and the layer-by-layer stacking structures greatly influence the cost-efficiency, conformability and breathability of the devices, further hindering their practical applications. Herein, we report a facile and low-cost strategy for the fabrication of a skin-friendly thread/paper-based wearable system consisting of a sweat reservoir and a multi-sensing component for simultaneous in situ analysis of sweat pH and lactate. In the system, hydrophilic silk thread serves as the micro-channel to guide the liquid flow. Filter papers were functionalized to prepare colorimetric sensors for lactate and pH. The smartphone-based quantitative analysis shows that the sensors are sensitive and reliable. Although pH may interfere the lactate detection, the pH detected simultaneously could be employed to correct the measured data for the achievement of a precise lactate level. After being integrated with a hydrophobic arm guard, the system was successfully used for the on-body measurement of pH and lactate in the sweats secreted from the volunteers. This low-cost, easy-to-fabricate, light-weight and flexible thread/paper-based microfluidic sensing device may hold great potentials as a wearable system in human sweat analysis and point-of-care diagnostics.

In order to improve the efficiency of disease diagnosis and environmental monitoring, it is desirable to detect the concentration of proteins and metal ions simultaneously, since the current popular diagnostic platform can only detect proteins or metal ions independently. In this work, we developed a colorimetric microfluidic paper-based analytical device (µPAD) for simultaneous determination of protein (bovine serum albumin, BSA) and metal ions [Fe(III) and Ni(II)]. The µPAD consisted of one central zone, ten reaction zones and ten detection zones in one device, in which reaction solutions were effectively optimized for different types of chromogenic reactions. Fe(III), Ni(II) and BSA can be easily identified by the colored products, and their concentrations are in good accordance with color depth based on the established standard curves. The detection limits are 0.1 mM for Fe(III), 0.5 mM for Ni(II) and 1µM for BSA, respectively. Best of all, we demonstrated the efficiency of the µPAD with accurate detection of Fe(III), Ni (II) and BSA from river water samples within 15 minutes. The µPAD detection is efficient, instrument-free, and easy-to-use, holding great potential for simultaneous detection of cross type analytes in numerous diagnostic fields.