Search

Chloropropanols such as 3-monochloropropane-1,2-diol (3-MCPD) and 1,3-dichloro-2-propanol (1,3-DCP) have drawn increasing attention due to their release from food contact paper and their potential carcinogenic effects. In this study, the effects were investigated of water extraction conditions on release of chloropropanols from food contact paper, and the extraction efficiencies of chloropropanols by water extract and migration method were compared. Cold water was found to be more severe than hot water for extraction of chloropropanols, with the highest water extraction value obtained at 23°C. Two hours of extraction was sufficient as the chloropropanols can be fully extracted from food contact paper within a short period of time. Increase of temperature in the range of 10°C-60°C had little impact on release of chloropropanols, however, the extraction of chloropropanols decreased when high temperatures (80°C or above) were applied due to volatilisation losses. Hence, attention should be paid when choosing extract conditions representing the worst-case scenario. The water extraction value using EN 645 method gives higher results compared to migration test described in GB 31604.1 and GB 5009.156, suggesting that the water extract method was probably more severe. For migration test, aqueous-based simulants were found to be more conservative than oil-based simulants, suggesting the conventional experiment conditions applicable for compliance test of chloropropanols migration can be simplified and optimised.

The global reality of the COVID-19/Corona pandemic paradoxically boosted national politics, broadcasting and citizenship. Media coverage, especially initially, praised citizen solidarity and the creative solutions that were pioneered to care for each other. A year later, a lasting social learning curve throughout and after this crisis seems illusory. The pandemic, this paper argues, needs to be understood in a longer timeframe as the working through and coming to terms with neo-liberal governmentality. The (often hilarious) early responses on social media provide a strong entry to do so. Our focus will be on the Netherlands which had a so-called ‘intelligent’ lockdown during the first wave of COVID-19 in the spring of 2020. Using the authors’ own sharing back and forth of toilet paper memes as a starting point, we aim to explore the notion of collective self-reflection and citizen co-education underlying both heated and simply ridiculous posts. Using previous discussion of cultural citizenship, this paper inquires into how pandemic citizenship played out as a vast exercise in disciplining and distinction through jokes and anger. The material suggests a nostalgic turn that might point to an implicitly voiced critique of neoliberal governmentality.

Transforming Pulp and Paper (P&P) mills into Integrated Forest Biorefineries (IFBR) is a prominent solution to save Canadian P&P industry that has been facing decline of conventional paper demand. ...

Ning Gao,1,* Meng Li,2,* Weiming Wang,1 Lei Wang,3 Zhen Liu,4 Yufeng Guo1 1Department of Acupuncture and Moxibustion, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 2Department of Gastroenterology, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 3Department of Dermatology, China-Japan Friendship Hospital, Beijing, 100020, People’s Republic of China; 4Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, Beijing, 100091, People’s Republic of China*These authors contributed equally to this workCorrespondence: Zhen Liu, Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, No. 1 Xiyuan Playground, Haidian District, Beijing, People’s Republic of China, Email doctorliuzhen@126.com Yufeng Guo, Department of Acupuncture and Moxibustion, Guang’ an Men Hospital, China Academy of Chinese Medical Sciences, No. 5 Beixiange St., Xicheng District, Beijing, People’s Republic of China, Email gamgyf@139.comBackground: In recent years, the incidence of herpes zoster has risen steeply, the exact pathogenesis of the acute pain and the transformation into postherpetic neuralgia are still obscure, and the absence of effective management remains a major therapeutic challenge. The purpose of this study was to perform a qualitative and quantitative bibliometric analysis of the 100 most cited papers on herpes zoster.Materials and methods: Related literature were retrieved from the Web of Science Core Collection. Excel and VOSviewer software were applied to quantitatively analyze, and construct the bibliometric network charts.Results: The Top 100 most-cited papers published between 2000 and 2018 showed a fluctuating downward trend. The most studies were published in the year of 2000 (n = 12). The article entitled “A vaccine to prevent herpes zoster and postherpetic neuralgia in older adults” from Oxman MN, was the most-cited publication. The United States was the most contributing country, followed by the United Kingdom, and Italy. Finland occupied the highest citations per publication (CPP). The University of Colorado topped the list of institutions with the most publications with 18 articles and also had the most citations (average citations: 281.78 per article). Myron J Levin from the University of Colorado School of Medicine is the most published and most cited researcher overall, whereas Duke University’s John W Gnann tops the list in terms of average CPP.Conclusion: In terms of the quantity of T100 articles, researchers, and organizations, the US is the predominant country. The most T100 papers were published in the special journal Clinical Infectious Diseases. The most academic focus remain the remedies for postherpetic neuralgia and vaccine development for individualized groups.Keywords: herpes zoster, bibliometric study, top-cited, citation, VOSviewer

In an earlier publication (Van Wee & Banister, 2016), we explained that literature review papers (LRP) should explicitly report on the search and selection process of documents included. In this paper, we present two approaches for reporting the methodology for doing this: a basic approach and a reasoned approach. The basic approach includes reporting databases(s), keywords, search strings, snowballing, the selection of documents, presenting an overview of documents included and reporting additional selection criteria (if applicable). The reasoned approach adds to the basic approach (what was done) by explicitly explaining the motivation for choices and showing the selection process graphically (why it was done). The two approaches should be seen as options, and not the only alternatives. We recommend that authors of LRPs depart from these approaches and modify them where appropriate. The important lesson is that authors should be explicit about the approach adopted, as this enables the reader to understand the thinking behind the LRP and the conclusions drawn.

The present study investigated the phycoremediation efficacy of two freshwater green microalgae Chlorella ellipsoidea and Desmodesmus opoliensis for treatment of water of Ellenga beel, a wetland lo...

Time-limited exposure of electrode-free optically rewritable electronic paper is essential for applications, but performance characteristics can be modest. In this study we investigate whether imag...

In this study, the removal of UV254, phenol, and calcium from paper industry wastewater by persulfate oxidation was investigated. Fe2+ addition and heat application methods were used for persulfate...

Commercial Chinese ink was employed to disperse pristine vapor-grown carbon nanofibers (VGCNFs) in aqueous suspensions via horizontal ball milling. The obtained suspension was used to fabricate conductive paper-based composites through filtration-deposition onto filter paper. It was found that the carbon black particles from the Chinese ink helped separate VGCNFs and acted as connection points between the VGCNFs, while the glue reinforced the conduction network. Thus, the VGCNF-ink/paper ternary composite showed sufficiently low sheet resistance. With merely 2.5 mg·cm−2 VGCNFs, the sheet resistance could be reduced to 4.5 Ω·sq−1. As a proof of concept, these paper-based composites were directly used as electrodes of solid-state symmetric electronic double-layer capacitors (EDLCs) and the substrate for the electrodeposition of MnO2 to achieve higher electrochemical performances. The EDLCs fabricated with 2.5 mg·cm−2 VGCNFs showed a specific capacitance of 224 mF·cm−2 at a current density of 1 mA·cm−2, which was retained by 86.4% after 10,000 charge-discharge cycles. Moreover, thanks to the high electrical conductivity and the porous structure, the MnO2 decorated paper-based composites exhibited dramatically enhanced specific capacitance. It is believed that our finding offers an idea to directly utilize commercial Chinese ink for the fabrication of electrode materials.

The pulp and paper industry converts roundwood and recycled fibre, collected from wastepaper into printing and writing papers, and other specialty grades of paper. The pulp and paper mills in Ontar...

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

For the first time, molecular dynamics simulation was used to analyse the solubility of five kinds of nanoparticles (SiO2, ZnO, Al2O3, Fe2O3, TiO2), cellulose crystalline region and cellulose molec...

In order to obtain a lignin-based adsorbent with low cost, simple operation and no further modification, a calcium lignin adsorbent was prepared from chemical mechanical pulping (CMP) waste liquor by directly calcification from lime. The calcium lignin was characterized by BET, SEM, TEM, FT-IR and solid-state NMR analyses. The results showed that the molecular structure of the calcium lignin particles did not change when compared to sodium lignin, the formation mechanism of calcium lignin was revealed. The initial COD and lignin contents of CMP waste liquid were 54858 mg/L and 24.39 g/L, the conversion rate of lignin can reach 71.36% when was deal with lime. Thus, most of the lignin resources in the waste liquid were recovered. The middle-stage wastewater (MSWW) of pulping and papermaking was dealt with calcium lignin, the COD removal rate was up to 85.83%. The adsorption isotherms and kinetics were well fitted by the Langmuir model and pseudo-second-order kinetic model, respectively. Lime was regenerated from the used calcium lignin with high-temperature calcination, the conversion rate of calcium ions can reach 83.56%. Overall, the calcium lignin prepared by the one-step method exhibited great potential for effectively removing COD from middle-stage wastewater.

Osteoporosis and associated fractures present a major challenge in improving global health outcomes. Key clinical aspects are the definition of osteoporosis and associated fractures, fracture risk prediction, stratification of risk of fracture, intervention thresholds and the most appropriate intervention based on integration of aforementioned. Correct understanding and application of these concepts are essential to stem the increasing tide of fragility fractures associated with an aging population. The role of muscle strength and function, sarcopenia, and the newly emerging concept of osteosarcopenia in maintaining bone health are discussed in detail.

Clear legal content of white papers provides certainty, stability and trust in the relations between all the participants in initial coins offering (ICO) procedures and contributes to the successfu...

Research by the paper industry into new materials to expand the raw material base for pulp is on the ascendancy due to growing demand for pulp and paper products. This study assessed the anatomical...

Plant fiber classified as environmentally friendly material is a promising renewable engineering material rich in lignocellulose that can be employed in the pulp and paper industry as a substitutio...

Gas chromatography – tandem mass spectrometry (GC-MS/MS) using formic acid as a protective agent is reported for the determination of acrylic resin monomers in food contact packaging paper. The analytes were extracted by ethanol mixed with formic acid with 2-phenylethyl propionate as the internal standard. The extract was separated by a 6% cyanopropylbenzene-94% dimethylsiloxane ultra-inert chromatographic column and analyzed by GC-MS/MS in multiple reaction monitoring (MRM) mode. 13 acrylic resin monomers including acrylic acid, styrene, and acrylic ester were separated. The procedure was successfully applied for the analysis of real samples. The procedure provided a linear calibration range with detection limits from 0.16 to 0.46 mg kg−1. The mean recoveries were from 88.1% to 100.9% with relative standard deviations less than 5.4%. The residual acrylic resin monomers in packaging paper were primarily from printing base paper and varnish. Of the acrylic resin monomers, the monomers except for butyl acrylate and 2-ethylhexyl acrylate showed low migration rates. The method provides high sensitivity and good reproducibility with simple pretreatment, demonstrating application for monitoring acrylic resin monomers in food contact packaging paper.

Less than 65% of wastepaper can be recycled, and the remaining wastepaper may end up polluting groundwater and generating greenhouse gas emissions if disposed improperly by using traditional approa...

This practitioner paper presents the case of a small paper business named JNA Pulp, initiated with the vision to provide high-quality imported paper to the market. The paper discusses several hurdl...

Ruminants would suffer from gastric distension (bloat) when feeding on alfalfa (Medicago sativa L.; Alf), while tannins can relieve this problem. Thus, this study aimed to evaluate the effect of Alf mixed with paper mulberry (Broussonetia papyrifera) leaves (PML) or condensed tannins (CT) extracted from PML on in vitro fermentation performance. Seven experimental treatments based on the mass ratios of Alf and PML were set up: Alf, PML, 3A1P (Alf:PML = 3:1), 1A1P (Alf:PML = 1:1), 1A3P (Alf:PML = 1:3), A1P (Alf with 1% CT extracted from PML), A2P (Alf with 2% CT extracted from PML), and a blank. The results after fermentation were as follows. (1) The degradable dry matter (DDM) and degradable organic matter (DOM) contents increased simultaneously with the increase in the proportion of PML (p .05), propionic, and butyric acids compared to Alf alone. Adding CT improved the concentrations of propionic and butyric acids over the Alf treatment (p

Microfluidic paper-based analytical devices are emerging as promising options for on-the-spot detection of chemical contaminants in water. The coupling of these devices with digital imaging technol...

The pulp and paper industry has significant sustainability implications and necessarily requires a careful consideration of direct and lower-tier suppliers for effective sustainable supply chain ma...