Search

A model of the piece-homogeneous interphase space of stranded cables is proposed, taking into account the influence of cracks oriented along the lines of force of the electric field. The cracks are filled with low molecular weight substances. The case of a probing electric field with a significant tangential component is considered.. The equivalent values of the tangent of the dielectric loss angle at various parameters of low molecular weight substances in the cracks of the polyethylene insulation of the conductor with a cross section of 2.5 mm2 were determined. The equivalent tangent of the angle of dielectric loss increases by (3-20) times when the dissipation of electrical energy by low molecular weight substances changes from 10% to 100% in a crack, which is 1% of the thickness of an intact section of polyethylene insulation. The distribution of the electric field for the general case of accumulation of low-molecular products in capillaries formed by slit-like gaps between isolated veins is obtained. A strong electric field in the smaller part of the gap between the insulated cores, which occurs at a core potential of 1 kV, contributes to the capillary absorption of decomposition products of both solid polyethylene insulation and water vapor from the atmosphere in the case of unshielded structures of multi-core cables. The asymmetric configuration of the probing electric field with a significant tangential component makes it possible to detect low-molecular decomposition products of solid polymer insulation, which are a sign of its aging. Differences experimentally observed in the value of tgδ with different schemes of examination of multi-core cables are related, to a greater extent, to the uneven distribution of substances dissipating electrical energy across the cross-section of the cable, and not to a change in the structure of the probing electric field. [ABSTRACT FROM AUTHOR]

Herein, the PMMA/MWCNT/Ag hybrid composite films are prepared by solvent casting method to be used in an electrical application. The AC conductivity and dielectric characteristics have been investigated at room temperature. The electrical conductivity of the hybrid composite reaches a percolation critical concentration of 2.14×10-4 S/cm by Ag doping. For all PMMA/MWCNT/Ag hybrid composites, the frequency-dependent dielectric constant decreases as the frequency area widens. As the concentrations of MWCNT and Ag increase, the AC conductivity exhibits an increasing trend. The MWCNT and Ag content was found to significantly affect the SE of the given composites. A high electromagnetic (EM) shielding efficiency (SE) was achieved between 8.2 and 12.4 GHz (X-band). The highest EM attenuation of 18 dB at 12 GHz was achieved using 0.5 wt% MWCNT and Ag. The thermal analysis of the formed PMMA/MWCNT/Ag hybrid composites showed that exothermic reactions with the greatest weight loss took place between 200°C and 300°C. FESEM show that PMMA/MWCNT/Ag hybrid composites had uniform dispersion of the carbon nano tube and silver particles within the PMMA matrix .

Two different groups of solid polymer sheets: low density polyethylene (LDPE) sample of thickness 0.006 cm and 0.007 cm along with high density polyethylene (HDPE) sample of the thickness of 0.009 cm, 0.010 cm were taken in this work. The measurement of electrical properties such as dielectric constant, ε' and dielectric loss, ε'' for LDPE and HDPE polymer sheets have been measured using a dielectric cell. The dielectric cell has been fabricated which consists of two circular parallel plates of pure stainless steel each of 5 cm diameter and 2 mm thickness. An impedance bridge (GRA 650A) was used for measurement of capacitance, C, and dissipation factor, D in the audio frequency (AF) range, 100 Hz to 10 kHz. Different samples were loaded in between the two plates of the cell and the capacitance as well as the dissipation factor were estimated from the dial readings of the bridge. Effect of frequency variation on ε', ε'', relaxation time, τ , dissipation factor, tanδ and ac conductivity, σ were also discussed at audio frequency range. The complex permittivity, ε*, related to free dipole oscillating in an alternating field and loss tangent, tanδ were calculated. The frequency-dependent conductivity, dielectric behavior, and electrical modulus, both real (M') and imaginary (M") parts of LDPE and HDPE have been studied in this work. The values of the real part of the electrical modulus (M') did not equal to zero at low frequencies and it is expected that the electrode polarization may develop in both sheets. These findings reveal an increased coupling among the local dipolar motions in a short-range order localized motion. The analysis of real (ε') and imaginary (ε'') parts of dielectric permittivity and that electrical modulus real (M') and imaginary (M") parts signify poly dispersive nature of relaxation time as observed in Cole-Cole plots.

The food industry mainly uses convective drying technologies for grain and oilseeds implemented in driers of various designs, i.e., towel, belt, and drum. Heat transfer to raw materials is realized here using heated airas a drying agent. The technology of microwave seed treatment is a promising way to organize the drying process, it has some differences from traditional methods of dehydration. Microwave heating provides energy to the volume of the material, and the heating temperature is easy to control. The article presents theoretical and experimental research of rapeseed dielectric heating during drying in a microwave field. Mathematical models of heat and mass transfer developed for modelling microwave drying processes are analysed, and the dielectric properties of oilseeds depending on humidity and temperature are discussed. The principle of microwave energy conversion into heat is based on the effective absorption of moisture of the heated product, microwave energy supplied to it. Thus, the heat generated in the processed product and supplied to the working chamber of the microwave is almost completely absorbed by the seeds, regardless of its shape and weight. The intensity of heating of rapeseed depends on its dielectric properties and microwave field strength. The coefficient of dielectric loss of rapeseed largely depends on the moisture contentbecause water plays a major role in the process of energy absorption during dielectric heating. The nonlinear dependence of the dielectric loss coefficient on moisture is due to the variety of moisture forms bond in rapeseed. The decrease in the value of the dielectric loss coefficient, with increasing rapeseed temperature can be explained by the active water loss when heating the seeds. [ABSTRACT FROM AUTHOR]

Copyright of Scientific Journal of National University of Life & Environmental Sciences of Ukraine. Series: Technique & Energy of APK is the property of National University of Life & Environmental Sciences of Ukraine and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)