Search

In recent years, the production of bioethanol from synthesis gas offers a common solution to the increasing levels of air pollution and the need for renewable energy sources. Synthesis gas is the combination of gases such as CO, CO2, N2, H2, NOx, which can form air pollution and can be used in the production of bioethanol by metabolizing these gases by Clostiridium species. Bioethanol is one of the most important biofuels because of the advantage of direct use by blending with gasoline. Pyrolysis and biochar production is an important alternative to expensive pretreatment methods used in waste and lignocellulosic raw materials in bioethanol production. In this study the wastes were converted into biochar by pyrolysis and the waste gas is collected to produce bioethanol which is an integrated and energy intensive approach. The use of mixed culture in the production of ethanol from pyrolysis gas instead of pure Clostiridium species is also important in terms of reducing costs. In this study, by using the the waste gas released during biochar production from fruit and vegetable wastes ethanol produced by syngas fermentation using heat pretreated mixed culture. While the positive effect of heat pretreatment was observed in the mixed culture, the amount of pyrolysis gas to be fed to the reactors was optimized and the highest ethanol production was observed in 5 and 10 mL pyrolysis gas feedings as 5 g/l.. [ABSTRACT FROM AUTHOR]

Fuel cells play an important role in clean and efficient energy technologies. The proton exchange membrane (PEM) fuel cell, which uses hydrogen as fuel and operates at lower temperatures than other types, is important for portable electrical systems. Carbon material is used in the most of the fuel cell parts. In this study, the effect of biomass derived biochar-the carbonized material- on fuel cell efficiency has been investigated as an alternative, clean, inexpensive and sustainable carbon material in the membrane electrode assembly. Especially the sulphated biochar, the use of catalyst was reduced by half, results in higher fuel-cell voltage. A 0.56 V voltage was obtained with a half-catalyzed fuel cell, while a 0.78 V voltage was measured when sulfated biochar was used in the same cell. [ABSTRACT FROM AUTHOR]