Search

Background and Objectives: Advances in the field of three-dimensional scanning have enabled the development of instruments that can generate images that are useful in medicine. On the other hand, satisfaction studies are becoming increasingly important in the evaluation of quality in healthcare. We aimed to evaluate patients' and professionals' satisfaction with the use of a three-dimensional scanner applied to chest wall malformations., Material and Methods: In the framework of a study to validate the results of three-dimensional scanning technology, we developed questionnaires to measure satisfaction among patients and professionals. We analyzed the results with descriptive statistics., Results: We included 42 patients and 10 professionals. Patients rated the speed and harmlessness positively; the mean overall level of satisfaction was 4.71 on a scale from 1 to 5. Among professionals, the level of satisfaction was lower, especially with regards to the treatment of the image; the mean overall level of satisfaction was 3.1., Conclusions: Patients rated 3D scanning technology highly, but professionals were less satisfied due to the difficulty of treating the images and lack of familiarity with the system. For this technology to reach its maximum potential, it must be simplified and more widely disseminated., (Copyright © 2019 SERAM. Publicado por Elsevier España, S.L.U. All rights reserved.)

Objective: To perform an anatomical and radiological study, using fibre microdissection and diffusion tensor tractography (DTT), to demonstrate the three-dimensionality of the superior, middle and inferior cerebellar peduncles., Material and Methods: A total of 15 brain-stem, 15 cerebellar hemispheres, and 5 brain hemispheres were dissected in the laboratory under the operating microscope with microsurgical instruments between July 2014 and July 2015. Brain magnetic resonance imaging was obtained from 15 healthy subjects between July and December of 2015, using diffusion-weighted images, in order to reproduce the cerebellar peduncles on DTT., Results: The main bundles of the cerebellar peduncles were demonstrated and delineated along most of their trajectory in the cerebellum and brain-stem, noticing their overall anatomical relationship to one another and with other white matter tracts and the grey matter nuclei the surround them, with their corresponding representations on DTT., Conclusions: The arrangement, architecture, and general topography of the cerebellar peduncles were able to be distinguished using the fibre microdissection technique. This knowledge has given a unique and profound anatomical perspective, supporting the correct representation and interpretation of DTT images. This information should be incorporated in the clinical scenario in order to assist surgeons in the detailed and critical analysis of lesions that may be located near these main bundles in the cerebellum and/or brain-stem, and therefore, improve the surgical planning and achieve a safer and more precise microsurgical technique., (Copyright © 2016 Sociedad Española de Neurocirugía. Publicado por Elsevier España, S.L.U. All rights reserved.)

Background: The most common cause of anal sphincter injuries in women is vaginal birth. Endo-anal ultrasound is currently used for the diagnosis of anal sphincter defect. However, due to the inconvenience caused, it is not an applicable technique during the immediate post-partum. The aim of this study was to determine whether transperineal ultrasound in 3/4D is a useful diagnostic method for the assessment of anal sphincter during the immediate post-partum., Material and Methods: A prospective study was conducted on the vaginal deliveries performed between September 2012 and June 2013 in the Valme University Hospital (Seville). Obstetric and foetal parameters that could influence the onset of perineal tears were studied. The patients underwent a transperineal 3/4D ultrasound and a multislice study (48hours after birth)., Results: The study included 146 puerperal women. The sphincter complex was assessed in all of them during the immediate post-partum. External anal injuries were observed in 10.3% of the cases. In 8.2% of cases, the primary suture of the external anal sphincter was detected during ultrasound examination, and 2.1% of asymptomatic lesions were diagnosed only with post-partum ultrasound. None of the patients reported discomfort or pain., Conclusions: The 3-dimensional transperineal ultrasound is helpful in determining the primary repair of the anal sphincter during the immediate post-partum, with no discomfort for patients, as well as for establishing those early sphincter injuries that go unnoticed during vaginal delivery., (Copyright © 2015 Academia Mexicana de Cirugía A.C. Publicado por Masson Doyma México S.A. All rights reserved.)

Objectives: HistoScanning™ (HS) is a method of ecographic diagnosis of prostate cancer. We analyze the effectiveness of the HS realization prior to the biopsies for the prostate adenocarcinoma diagnosis., Material and Methods: From August to October 2012 we have carried out a study with HS prior to the biopsies in 32 patients. In all cases sextants transrectal biopsies have been realized (two cores in each sextant) in the periphery zone. In those sextants in which there were suspicious areas with HS, the biopsies were addressed to those areas. Transperineal biopsies were added to those zones placed in the half-front or apical prostatic zone. The medium age was 63.7 years (range 40-82) with a medium PSA of 8.0 ng/ml (range 3.5-36.2) and a medium prostatic volume of 46.6cc (range 18.2-103.2). In eight cases it was the first biopsy, in 14 cases they were repetition biopsies and 10 patients had a previous diagnosis of prostate adenocarcinoma (8 in a program of active surveillance and 2 T1a in RTU of previous prostate)., Results: In the 32 patients a medium of 7,5 zones were biopsied (range 6-9) with a total of 239 zones studied. There were identified a medium of 3.2 zones with suspicious areas (ZS) with HS (range 2-5) with a total of 103 ZS. In 72 zones of 25 patients it was found adenocarcinoma or PIN (2 PIN, 11 score Gleason 6, 7 score Gleason 7, 3 score Gleason 8 and 2 score Gleason 9). There were 35 positive false zones in 20 patients (11 normal parenquima and 9 chronic inflammation). Negative falses were produced in 5 zones in 5 patients (2PIN, 2 score Gleason 6 and 1 score Gleason 7) although in all 5 cases adenocarcinoma was encountered (o discovered) in other zones. The HS presented a sensibility of a 93.5% with a specificity of 79.5%. The positive predictive value was of the 67.35% with a negative predictive value of 96.5%., Conclusions: In spite of being a selected serie, with a high rate of patients with adenocarcinoma, the exploration with HS has presented a great sensibility and a high negative predictive value. These data, although they must be confirmed in less selected series, state that the prior exploration with HS can help as in the diagnostic in the biopsies as in the follow-up of programs of active surveillance., (Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.)

Background: Conventional disector methods currently require considerable financial, technical and operational costs to estimate the number of cells, including cardyomyocytes, in a 3D area., Objective: To use fluorescence microscopy in a modified disector method to determine the number of myocytes in cardiac tissue in normal and pathological conditions., Methods: The study employed four-month-old male Wistar rats with weight of 366.25 ± 88.21g randomized in control (CG, n=8) and infected (IG, n=8) groups. IG animals were inoculated with T. cruzi Y strain (300,000 trypomastigotes/50g wt). After eight weeks, the animals were weighted and euthanized. The left ventricles (LV) were removed for stereological analysis of numerical density of cardiomyocytes (Nv[c]) and total number of these cells in the LV (N[c]). These parameters were estimated using a fluorescent disector (FD) and compared with the conventional optical (OD) and physical (PD) disector methods., Results: In both disector methods, IG animals presented significant decrease of Nv[c] and N[c] compared to CG animals (P< 0.05). There was no significant difference in these variables despite the disector method applied in CG and IG animals (P> 0.05). A strong correlation, equal or above 96%, was obtained between FD, OD and PD., Conclusion: The FD method seems to be equally reliable to determine Nv[c] and N[c] in normal and pathological conditions and presents some advantages compared to conventional disector methods: reduction of histological slices and images in the stereological analysis, reduction of time to analyze the images, construction of FD in simple microscopes using the epifluorescence mode, distinction of disector planes in lower magnifications.

Premature ventricular contractions originating in the right ventricular outflow tract may respond poorly to pharmacological treatment, and ablation using conventional fluoroscopically-guided systems may be complicated by the difficulty in inducing arrhythmias. We describe the use of a non-contact mapping system to ablate difficult-to-induce premature ventricular contractions originating in the right ventricular outflow tract. Five premature ventricular contractions sites in the right ventricular outflow tract were ablated in a prospective series of 4 patients. Patients had a poor quality of life and had not responded to antiarrhythmic drugs. A mean of 3 radiofrequency pulses per site was applied and mean application time was 113±15s. We achieved a 100% acute success rate and there were no complications. Patients were asymptomatic without drug therapy after a mean of 30±16 months of follow-up. The noncontact mapping system is highly effective in eliminating difficult to induce, isolated premature ventricular contractions., (Copyright © 2011 Sociedad Española de Cardiología. Published by Elsevier Espana. All rights reserved.)

A virtual model of fibro-bronchoscopy is reported. The virtual model represents in 3D the trachea and the bronchi creating a virtual world of the bronchial tree. The bronchoscope is modeled to look over the bronchial tree imitating the displacement and rotation of the real bronchoscope. The parameters of the virtual model were gradually adjusted according to expert opinion and allowed the training of specialists with a virtual bronchoscope of great realism. The virtual bronchial tree provides clues of reality regarding the movement of the bronchoscope, creating the illusion that the virtual instrument is behaving as the real one with all the benefits in costs that this means.

Background: Early detection of septal changes such as septal hypertrophy commonly present in fetuses of diabetic mothers would help reduce the high rates of infant mortality., Objective: Determine reference ranges for the fetal ventricular septal area through three-dimensional ultrasound (US3D) using the STIC method (Spatio-Temporal Image Correlation)., Methods: We conducted a cross-sectional study with 69 pregnant women between the 18th and 33rd weeks of pregnancy. We used as a reference the four-chamber plane with the ROI (Region of Interest) positioned from the ventricles; the septum area were manually marked. To assess the correlation of the interventricular septum area with gestational age (GA), we constructed scatter plots and calculated Pearson's correlation coefficient (r), and the adjustment was performed by the coefficient of determination (R²). We calculated averages, medians, standard deviations (sd), as well as maximum and minimum values. To calculate the intraobserver reproducibility, we used the intraclass correlation coefficient (ICC). The interventricular septum thickness was measured and it was correlated with gestational age and the septal area rendered in 52 patients using the ICC., Results: The interventricular septum area was highly correlated with gestational age (r = 0.81), and the average increased from 0.47 cm² in the 18th week to 2.42 cm² in the 33rd of gestation. The intraobserver reproducibility was excellent with ICC = 0.994. No significant correlation was observed between the interventricular septum measurement and the GA (R² = 0.200), as well as there was no correlation with the septal area rendered with ICC = 0.150., Conclusion: Reference intervals for the interventricular septum area between the 18th and the 33rd pregnancy week were determined to be highly reproducible.

Purpose: To correlate the optic nerve head topographic parameters measured by the Heidelberg Retina Tomograph II (HRT) with the perimetric indices of standard automated perimetry (SAP)., Methods: This study included 101 normal subjects, 247 ocular hypertensive eyes (increased intraocular pressure with normal SAP) and 102 glaucomatous subjects (IOP above 21 mm Hg and abnormal standard automated perimetry). Only one eye was randomly chosen from each subject for the study. The visual field was evaluated by means of Humphrey Field Analyzer (24-2 full threshold strategy). The HRT II (Heidelberg Engineering) was used to acquire and measure the optic disc topographic parameters. Pearson correlations between topographic data and perimetric indices were performed for the total sample and each group of patients. The distribution of values obtained in the samples was normal., Results: A significant correlation was found between several optic disc parameters and the global indices of SAP. Rim area, rim volume, cup/disc area ratio, rim/disc area ratio, cup shape measurement, RNFL cross-sectional area, and discriminant functions FSM and RB, showed the strongest correlation with the visual field indices in the total and glaucoma groups (RIM AREA: total group: r=0.32; p=4.14x10(-11)/glaucoma group: r=0.28; p=0.004. RIM VOLUME: total group: r=0.26; p=1.55x10(-7)/glaucoma group: r=0.26; p=0.006). The ocular hypertensive group showed few significant correlations., Conclusions: The correlations found between standard automated perimetry and HRT defined topographic parameters allow a better understanding of glaucomatous damage and make decision-making easier.

Objectives: Upper urinary tract (UUT) tumors are a relatively low incidence pathology which often represents a diagnostic challenge for the urologist, because several imaging tests are usually necessary to achieve the final diagnosis. Over the last years CT scan has suffered a notable development and nowadays, with the arrival of new image processing hardware and software, it is possible to detect small urothelial lesions and to perform 3-D urinary tract reconstruction and virtual endoscopic navigation., Methods: Between January 2004 and June 2005 we performed a total of 15 examinations in 15 patients for the study of asymptomatic hematuria of probable upper urinary tract origin. The technique included three phases to obtain images: basal phase, vascular phase and excretory phase. Processing and image analysis was performed by one radiologist., Results: A total of 10 tumors were diagnosed, with pathological confirmation in all cases. We did not register any complication secondary to the technique, and all patients tolerated well the exam., Conclusions: The CT urography is a safe, well-tolerated, highly sensitive and efficient imaging test, very useful in the diagnosis of renal and UUT pathology. It may become the only imaging test performed in the study of asymptomatic hematuria and the test of choice for the study of urological tumoral pathology.

The aim of this study was to develop a three-dimensional finite element model of the mandible, including its TMJ. The model consisted of 7942 nodes and 41,010 elements, which were obtained from a convergence test, done to minimize the result error. It included cancellous and cortical bone, periodontal ligament, masticatory muscles (masseters, temporalis, lateral and internal pterygoids), teeth and the articular disk. All characteristics such as dental, mandibular, and muscle geometry were obtained from a computerized tomography (CT) of a living person. CT sections were scanned and digitized with a CAD software program. After images were adequately assembled, a vertical tracing was done which allowed the definition of a three-dimensional mesh. Modeling of teeth was carried out independently and the periodontal ligament was later included, limiting the alveolar area. Muscles were modeled based on flat-scale photographs and total muscle force was distributed in multiple vectors. The articular disk was generated having 2 mm of thickness with the combination of spring-type (axial stiffness) and gap-type (contact) elements. The model was then analyzed with finite element method (FEM) software where a mesh was generated and values for Poisson's ratio, elasticity, and shear modulus were assigned. These were orthotropic for cancellous and cortical bone, and isotropic for dentin, periodontal ligament, articular disk, and temporal bone. The boundary conditions were defined restricting the nodes on the periphery of the temporal bone. It was therefore possible to generate a three-dimensional finite element model based on information obtained in vivo.