Search

Maintainability is one of the design parameters (reliability, availability, maintainability, and safety (RAMS)) and maintenance is needed to keep the respective design in sustainable use. At the same time, the human is involved in the form of interface and interaction in an engineered product/system designed. Ergonomics is a multi-disciplinary science that considers human capabilities and limitations in a broader sense. The objective of this paper is to integrate ergonomics into the maintainability design process in order to facilitate maintenance operation in lesser; time, cost, easier operation as well as the well-being of human who is involved. In other words, good ergonomics lead to good economics and in a broader sense, sustainability. This investigation shows that designing comfortable workplaces and lesser workload for maintenance operators will be beneficial for the maintainability design process and also improve the meantime to repair MTTR. In order to evaluate the effect of designed work-place and workload on maintainers 3 D Static Strength Prediction Program (3D SSPP) that is commonly used as an ergonomics evaluation tool in scientific studies was applied.

The maintenance planning corresponds to an approach that seeks to maximize the availability of equipment and, consequently, increase the levels of competitiveness of companies by increasing production times. This paper presents a maintenance planning based on operating variables (number of hours worked, duty cycles, number of revolutions) to maximizing the availability of operation of electrical motors. The reading of the operating variables and its sampling is done based on predetermined sampling cycles and subsequently is made the data analysis through time series algorithms aiming to launch work orders before reaching the variables limit values. This approach is supported by tools and technologies such as logical applications that enable a graphical user interface for access to relevant information about their Physical Asset HMI (Human Machine Interface), including the control and supervision by acquisition through SCADA (Supervisory Control And data acquisition) data, also including the communication protocols among different logical applications.

All electric powered machines offer the possibility of extracting information and calculating Key Performance Indicators (KPIs) from the electric current signal. Depending on the time window, sampling frequency and type of analysis, different indicators from the micro to macro level can be calculated for such aspects as maintenance, production, energy consumption etc. On the micro-level, the indicators are generally used for condition monitoring and diagnostics and are normally based on a short time window and a high sampling frequency. The macro indicators are normally based on a longer time window with a slower sampling frequency and are used as indicators for overall performance, cost or consumption. The indicators can be calculated directly from the current signal but can also be based on a combination of information from the current signal and operational data like rpm, position etc. One or several of those indicators can be used for prediction and prognostics of a machine’s future behavior. This paper uses this technique to calculate indicators for maintenance and energy optimization in electric powered machines and fleets of machines, especially machine tools.

Railway maintenance especially on infrastructure produces a vast amount of data. However, having data is not synonymous with having information; rather, data must be processed to extract information. In railway maintenance, the development of key performance indicators (KPIs) linked to punctuality or capacity can help planned and scheduled maintenance, thus aligning the maintenance department with corporate objectives. There is a need for an improved method to analyse railway data to find the relevant KPIs. The system should support maintainers, answering such questions as what maintenance should be done, where and when. The system should equip the user with the knowledge of the infrastructure’s condition and configuration, and the traffic situation so maintenance resources can be targeted to only those areas needing work. The amount of information is vast, so it must be hierarchized and aggregated; users must filter out the useless indicators. Data are fused by compiling several individual indicators into a single index; the resulting composite indicators measure multidimensional concepts which cannot be captured by a single index. The paper describes a method of monitoring a complex entity. In this scenario, a plurality of use indices and weighting values are used to create a composite and aggregated use index from a combination of lower level use indices and weighting values. The resulting composite and aggregated indicators can be a decision-making tool for asset managers at different hierarchical levels.

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

All assets necessarily suffer wear and tear during operation. Prognostics can assess the current health of a system and predict its remaining life based on features capturing the gradual degradation of its operational capabilities. Prognostics are critical to improve safety, plan successful work, schedule maintenance, and reduce maintenance costs and down time. Prognosis is a relatively new area but has become an important part of Condition‐based Maintenance (CBM) of systems. As there are many prognostic techniques, usage must be attuned to particular applications. Broadly stated, prognostic methods are either data‐driven, rule based, or model‐based. Each approach has advantages and disadvantages; consequently, they are often combined in hybrid applications. A hybrid model can combine some or all model types; thus, more complete information can be gathered, leading to more accurate recognition of the fault state. This approach is especially relevant in systems where the maintainer and operator know some of the failure mechanisms, but the sheer complexity of the assets precludes the development of a complete model‐based approach. The paper addresses the process of data aggregation into a contextual awareness hybrid model to get RUL values within logical confidence intervals so that the life cycle of assets can be managed and optimised.