Search

The aim. To study reconstructive operations on the mitral valve (MV) combined with aortic valve replacement (AVR) for combined mitral-aortic valve defects (CMAVD). Materials and methods. The study included 1690 patients with CMAVD who underwent surgical treatment at the National Amosov Institute of Cardiovascular Surgery of the National Academy of Medical Sciences of Ukraine for the period from 01/01/2006 to 01/01/2020. Of these, 429 (23.4%) patients underwent MV reconstruction with AVR. The following valve-sparing procedures were performed: – application of annuloplasty ring: 123 (28.7%); – MV suture annuloplasty: 137 (31.9%); – open mitral commissurotomy: 47 (11.0%); – open mitral commissurotomy + leaflet plication: 4 (0.9%); – application of autopericardial patch on the MV leaflet: 7 (1.6%); – alfieri procedure (MV bicuspidalization): 34 (7.9%); – mitral valve debridgment 12: (2.8%); – plasty with autopericardial patch: 18 (4.2%); – removal of vegetation from MV structures : 7 (1.6%); – resection of MV leaflets with addition of suture annuloplasty: 19 (4.4%); – resection of MV leaflets with addition of an annuloplasty ring: 21 (4.9%). Results. Fatal complications occurred in 4 cases due to heart failure (n = 2) and multiple organ failure (n = 2). Hospital mortality in AVR with MK plasticity MV plasty was 0.9%, which once again emphasizes the importance of traumatic intervention compared with combined mitral-aortic prosthetics, where mortality is 3 times higher. It decreased from 2.9% (2006–2012, n = 128) to 0.3% (2013–2019, n = 301), which indicates the effectiveness of the method with a significant increase in the number of operated patients. After correction, MV regurgitation decreased from +2.4 ± 0.3 to +0.4 ± 0.03. Coaptation of the sash Mk MV leaflets after correction was 7.4 ± 0.6 mm. At the hospital stage there was a decrease in the diastolic peak gradient on the MV from 19.4 ± 4.8 mm Hg to 6.4 ± 0.8 mm Hg. In the remote period, 82.6% of the discharged patients (n = 351) in the period of were followed for 9.3 ± 2.4 years. Better indicators were noted in group of patients with functional class III than those with functional class IV (p

The aim of the study was an in vitro hydrodynamic study of the developed prosthetic heart valve of the second generation, designed to carry out an implantation using «valve-in-valve» method. Material and methods. Prototypes of the developed prosthesis were studied under simulated physiological conditions of the heart using a Vivitro Labs pulse duplicator (Canada) in a comparative aspect with «UniLine» clinical commercial aortic valve bioprosthesis (Russia). Samples were tested by simulating sutureless implantation procedure. Results. The developed valves showed satisfactory hydrodynamic characteristics – for all cases of «implantation» from the position of the average trans-prosthetic gradient (6.1–11.1 mm Hg) and the effective orifice area (1.60–1.81 cm2 ). The analysis of the regurgitation fraction allowed us to determine the optimal sizes for implantation using «valvein-valve» method, which subsequently will form the basis of sizing guidelines for size selection. A qualitative analysis of the leaflet’s work demonstrated the presence of slight asymmetry for a number of prostheses – in case of mismatch of sizes when simulating «valve-in-valve» procedure. Conclusion. The tests demonstrate the viability of the developed design from the standpoint of hydrodynamic efficiency and determines the basic rules of selecting a prosthesis for reimplantation relative to the primary valve.