Search

I. Тhematic index II. Name index

Creation of new digital technologies let automate the reproduction of text and graphic information, led to the creation and development of the digital printing. Digital printing is a technology for producing prints in the printer based on the original layout, created as corresponding codes with a computer. One of the technologies of digital printing is a computer-to-press and one of the devices in this direction is risograph. The risograph printing quality is worse than offset printing. The text is printing with medium sharpness and images remind photos in old newspapers and require special preparation. But risograph is the most profitable solution for small and medium circulations from 50 up to 1000 sheets. Wide usage of risograph printing in typographies demands increase performance of the equipment with the high print quality of digital images. To improve the quality of risographic printing, the creation of methods is required to form the initial indicators of the original layout (clarity, correct transmission of halftones, contrast). At the same time, the result of obtaining high-quality images obtained by printing on a risograph is affected by surface microgeometry and the physical and mechanical properties of paper. So, the optical density of the ink layer on the print is largely determined by the structure of the sections of paper, in particular, absorbency and porosity. To obtain high-quality images on prints, it is necessary not only to customize the original layout, but also to select paper with such characteristics that would allow you to get the best result when printing on a risograph. Since the risograph occupies an intermediate place in quality between copying equipment and laser printing, a laser print is taken as the standard for print quality. And one of the tasks of the quality of risographic prints is to increase it to the quality of laser printing.

Тhematic Index.

Experimental studies of the dynamics of temperature, transmittance coefficient and forward scatter of radiation in the smoke under the ceiling space when burning paper where conducted. Behavior of main signs of fire at an early stage, common for the mentioned type of inflammables, was studied.

A method has been developed to improve paper qualitative characteristics which is used for manufacturing of packaging. It has been determined that while adding sulfate cellulose obtained from low-grade short flax in paper composition qualitative characteristics of the final product have been improved.

The paper considers problems pertaining to methodology and structure for dissertation preparation. All the problems have been solved on the basis of the analysis of questionnaire complexes. The paper presents concrete examples taken from the dissertations that have passed expertise of the Highest Certifying Commission.

The paper investigates an influence of component quantity (lignin, cellulose and hemicellulose) on qualitative (physical and mechanical) indices of waste-paper in relation to its storage period and weather conditions. It has been established that while storing (in waste dumps) waste paper it is to be kept at a definite temperature and humidity in order to reduce impact of weather conditions.

Hydraulic investigations of the Dneeper water intake for Newsprint Paper Mill in Shklov under various water levels and discharge in the river have been carried out. Regimes of bed alluvium and sludge motions have been studied. The recommendations on intake channel scheme and its main dimensions are given.

The paper considers some informational resources of the BNTU Scientific Library.

One of the important tasks is to deliver to the consumer a calibrated high-quality metal in a saleable condition, which requires protection from atmospheric corrosion and adverse climatic factors, protection from contamination and mechanical damage for the period of transportation to the consumer by motor transport, and storage at intermediate warehouses before going into production. A comprehensive system approach is needed to preserve the quality and appearance of the products on the way from the manufacturer to the consumer. The use of modern packaging materials, such as paper with corrosion inhibitor and polypropylene fabric reinforcement, will allow to obtain permanent guaranteed protection of the rolled surface and expands the possibilities of transportation and sales markets of metal products. The testing stage of the corrosion inhibitor included the determination of its protective properties. It is established that the advantage of packaging of rolled products in anticorrosive paper is that it, combining the functions of packaging means and means of preservation, allows you to completely abandon the expensive and time-consuming preservation of metal products with oils and greases. The use of a volatile corrosion inhibitor in the composition of the paper provides full protection of rolled products.

The paper gives an assessment of existing casting methods used for manufacturing products from aluminum materials with carbon filling compounds. It presents results of comparative studies of properties of aluminum materials in which microcrystalline graphite, fullerene black, nanotubes and an amorphous phase of glass carbon have been used as filling compounds.