Search

Objective. One of the most effective ways to assess thermal protection of construction facilities of various applications is thermal control. Methods. According to the national standard “Method for thermal imaging quality control of thermal insulation of enclosing structures” in force on the Russian Federation territory, the results of thermal imaging monitoring of capital and completed construction facilities are divided into qualitative and quantitative depending on set goals and objectives. Qualitative assessment involves computer processing and visual interpretation of thermograms using specialized software. Quantitative analysis of thermograms involves determining and numerically comparing parameters of reference areas and characteristics of defects detected in an object being under thermal control. Results. The paper describes particular characteristics and results of qualitative and quantitative analysis of thermograms (thermal images) obtained via thermography of fragments of external enclosing structures of a completed construction facility—an apartment building. The paper analyses existing methods of a quantitative assessment of thermograms described in regulatory documents and methodological recommendations, and presents specific examples of their application. Conclusion. Thermal imaging diagnostics makes it possible to qualitatively and quantitatively assess the level of thermal protection of the outer shell of an object under control by “decoding” thermograms and comparing calculated parameters with standard indicators.

The quality of service (QoS) in networking is the process of managing network resources to reduce packet loss and to lower network jitter and latency. QoS has been widely used in traditional network and can also be implemented in the 5G standard based on a software-defined network (SDN). A traditional network carries several challenges, such as vendor dependency, the complexity of managing a large network, dynamically changing forwarding policies, and more. Software-defined networking is a new networking strategy designed to address the challenges of a traditional IP network, such as high levels of complexity and inability to adapt to the new quality of service requirements in a timely manner. The fundamental idea behind SDNs compared to the conventional networking paradigm is the creation of horizontally integrated systems through the separation of the control and the data plane while providing an increasingly sophisticated set of abstractions. Recently, various SDN-enabled QoS frameworks have emerged that offer many possibilities for network reconfiguration and high-level definition of policies. QoS requirements for 5G networks have been defined on the basis of three main categories of use cases: extreme mobile broadband (xMBB), massive machine type communications (mMTC) IoT/M2M devices, and highly reliable М2М-communication (ultra-reliable machine-type communications – uMTC). This paper analyzes and surveys the QoS based on the openflow protocol method and QoS based on open-source SDN controllers method in 5G network. In addition, we discuss various architectural issues of open-source SDN controllers network and examine their impact on the QoS. Furthermore, we outline the characteristics of the QoS parameters such as latency, availability, reliability, jitter, and bandwidth in the 5G network. Finally, the article discusses and compares parameters of the QoS in 5G determined by world’s leaders in 5G technology.

Integrated circuits, systems on a chip are the key links in various industrial systems and state defense systems. The emergence of counterfeit integrated circuits, problems of piracy, overproduction, unauthorized interference in the design of microcircuit, hardware Trojans require the development of methods and means of their timely detection. Trojans can be introduced into the integrated circuits structure both on the development stage and during the production process, including the stages of specification, design, verification and manufacturing. The inclusion of additional elements in the integrated circuits structure jeopardizes the functional suitability and reliability of the system as a whole. For the purpose of hardware protection of projects, the methods of hardware coding are currently used.The paper discusses the features and reliability of logical coding of combinational circuits. An algorithm for cracking the code of combinational circuits is proposed, based on the description of encoded structure by the resolution function and reducing the problem to SAT CNF. The initial data for decoding the structure of a digital device is the structural implementation of encoded circuit, obtained, for example, by reverse engineering (prototype design), as well as an activated physical sample of an integrated circuit, when into protected from unauthorized access memory the correct key value is loaded. This sample can be used as a black box model. The main idea of breaking a key is to solve a problem without research on a large interval of values of input and output variables.

Objective. In recent decades, criteria for identifying potential areas have evolved hand in hand with technological tools such as geographic information systems (GIS). However, the criteria for the preservation of protected areas are often not taken into account, thus causing damage to environmental biodiversity that can become irreparable. This paper presents the way of optimizing the process of locating key terrain points by developing a hybrid algorithm for geospatial analysis in QGIS. The goal is to speed up computational time, which is a critical variable for the entire key point detection process, and to suggest potential areas that do not pose a threat to biodiversity. Methods. The strategy used is based on two fundamental assumptions: identifying the tops of spatial objects (rivers) and analyzing the distances between spatial objects (rivers and adjacent territories). The tops extraction allows obtaining potential points, while the distance analysis allows selecting among them those points that are in the range acceptable for locating a dam, provided that the least possible damage to the biodiversity of the adjacent territory is caused. The algorithm was validated using the example of the hydrological network of Manicaragua, Cuba. Results. The results were compared in terms of the calculation time used, the number of valid tops extracted, and the percentage reduction in the total number of areas. This comparison was made using one, two and three vector layers (.shp) with spatial objects representing strategic protected areas. Conclusion. The results obtained show that the more representative the space data (.shp) used, the more effective the results obtained using the algorithm are in relation to environmental protection tasks. A reduction of up to 13% from originally detected key points has been achieved.

The paper presents an analytical review of the application of biometric recognition systems in relation to facial image identification technologies. The classification of biometric systems is presented. The trends of technological progress in the field of biometrics and facial recognition capabilities are considered. It is determined that in 2020 there is a trend of transition from the use of biometric recognition technologies in traditional state security systems to the sphere of commercial and user applications. The process of «linking» encryption keys and passwords with the biometric parameters of the data subject is described. It is proposed that a biometric feature and a biometrics parameter mean a certain value that has a physical meaning that characterizes the subject itself. The possibility of using circular neighborhood and bilinear interpolation of pixel intensity values in biometrics is also presented. This will make it possible to build a local binary template. In order to solve the problem of identification of persons, it is advisable to investigate the essence of biometric systems in the technologies of identification of persons, their types, identifying the shortcomings of each of them, on the basis of which to present the directions of elimination and search for the most reliable technologies. The essence of the use of biometric systems in the technologies of identification of persons is, for example, that the user can provide the bank or other counterparty with evidence that it is he who wants to use the services on his accounts. At the same time, the demand has increased for contactless biometric solutions. These technologies are implemented in order to conduct additional biometric verification of users. This allows to minimize possible fraud or violation of the internal rules of the service, for example, the transfer of accounts of some registered users to others.