Search

One of the basic steps in water resources management and planning according to population increase and lack of water resources in Iran is to optimize the use of dam reservoirs. In this research, the effect of meteorological droughts on the optimization of the Aydoghmoush dam reservoir in the northwest of Iran was evaluated by applying metaheuristic algorithms under the impact of future climate change. Three models and two scenarios of SSP2-4.5 and SSP2-8.5 of the sixth IPCC report, and the LARS-WG downscaling model were used for Aydoghmoush dam weather station for the base period (1978-2014) and future periods of 2022-2040 and 2070-2100. The inflow and outflow of the dam, as well as the optimal utilization of the dam reservoir, were evaluated using standalone, and hybrid mode of genetic, slime mold, and ant colony algorithms. Results of the best release scenario (SSP2-8.5) showed that the annual rainfall in the future periods will decrease by 8.9 mm, and 14.5 mm, respectively, compared to the base period. The objective function of optimizing the use of the dam reservoir was defined as minimizing the sum of squared relative deficiencies in each month and maximizing the reliability in the statistical period of 2011-2021. The results showed that in terms of time reliability, vulnerability, and stability, the hybrid slime mold-genetic algorithm was better than other algorithms with values of 0.73, 0.32, and 28.78. Prediction of the dam's inflow and outflow using the hybrid slime mold-genetic algorithm indicated high accuracy compared to other models by 13% and 19% errors, respectively. [ABSTRACT FROM AUTHOR]

Accurate prediction of pore water pressure in the body of earth dams during construction with accurate methods is one of the most important components in managing the stability of earth dams. The main objective of this research is to develop hybrid models based on fuzzy neural inference systems and meta-heuristic optimization algorithms. In this regard, the fuzzy neural inference system and optimizing meta-heuristic algorithms including genetic algorithms (GA), particle swarm optimization algorithm (PSO), differential evolution algorithm (DE), ant colony optimization algorithm (ACOR), harmony search algorithm (HS), imperialist competitive algorithm (ICA), firefly algorithm (FA), and grey wolf optimizer algorithm (GWO) were used to improve training system. Three features including fill level, dam construction time, and reservoir level (dewatering) obtained from the dam instrumentation were selected as the inputs of hybrid models. The results showed that the hybrid model of the genetic algorithm in the test period had the best performance compared to other optimization algorithms with values of R2, RMSE, NRMSE, and MAE equal to 0.9540, 0.0866, 0.1232, and 0.0345, respectively. Also, ANFIS-GA, ANFIS-PSO, ANFIS-ICA, and ANFIS-HS hybrid algorithms performed better than ANFIS-GWO, ANFIS-FA, ANFIS-ACORE, and ANFIS-DE in improving ANFIS network training and predicting pore water pressure in the body earthen dams at the time of construction. [ABSTRACT FROM AUTHOR]

Purpose: One of the topics for manufacturers is to discuss the diversity of customer tastes. To manage this situation with the least change in products, multiple assembly lines make the necessary flexibility to produce the products. In multi-model assembly lines, different product types in different batches are produced and there is a setup time to prepare assembly lines between two types of products to produce another product type. This paper aims to investigate multi-model assembly lines and their sequencing, balancing, and worker assignment due to the existence of various tasks for workers according to learning and disremembering effects. Frequent changes in the product design of multi-model assembly lines according to customer demands can reduce the learning effect of workers and increase task times, while in another view, repeating tasks, particularly for products with more demands can increase the learning effect and reduce the task times. Therefore, in this study, the effects of workers' learning and disremembering multi-model assembly line balancing, sequencing, and worker assignment are investigated to minimize the number of workstations for a given cycle time not only to cover the different tastes of customers, but also indirectly minimize the costs of building stations, hiring, and employing manpower. Design/methodology/approach: In this paper, as an innovation, a mixed-integer mathematical model for multi-model assembly line balancing, sequencing, and worker assignment with different workers' skill levels and learning and disremembering rates has been developed to minimize the number of stations. Based on the nature of the multi-model, random demand for each product has been considered. After mathematical modeling, different small-sized problems have been solved by the GAMS software. Results and sensitivity analysis underlined the validity of the proposed model. Since this problem is typically NP-hard, GAMS software cannot solve medium and large-sized problems in a reasonable time. Therefore, the Krill herd optimization and Particle Swarm Optimization (PSO) algorithms have been used for medium and large-sized problems, which have not been used earlier in similar cases. The Krill herd optimization algorithm has been used as the proposed algorithm and PSO has been used as a competing algorithm. The parameters of both algorithms have been adjusted by the Taguchi method, and the best level has been selected for each parameter. Findings: 12 test problems were solved with different sizes. Results indicated that only five GAMS problems could reach the optimal solution. For better comparison of the Krill herd optimization and the particle swarm optimization algorithm, each test problem was run 30 times and minimum, maximum, and average objective function and their running times were reported. The results indicated that the objective function of both metaheuristic algorithms was the same but the Krill herd optimization algorithm can achieve optimal or near-optimal answers in less time than GAMS and the PSO algorithm declared the efficiency of the proposed algorithm in solving these problems. Research limitations/implications: One of the limitations in this research was the lack of cooperation of factories whose assembly lines were similar to the problem considered in this study, and in this regard, the real-world data was not accessible. Therefore, the standard test problems were used that existed in the famous database of assembly line balancing problems. Since the problem in this paper was new, some other required data, and different examples in different ways needed to be considered, randomly. Another limitation of using this research in a real-world situation was the challenge of exact determination of learning and disremembering rate of each worker which can be solved by using experts in the field of assessment and training. Originality/value: In this paper, a mathematical model was developed for multi-model assembly line balancing, sequencing, and worker assignment according to the learning and disremembering effect. Since the problem was NP-Hard, as well as GAMS software, two metaheuristic algorithms were applied for a similar problem, and their efficiency was compared with each other. The two-mentioned algorithms have not been used in previous studies. Both academic researchers and production managers can benefit from applying the findings of this study. [ABSTRACT FROM AUTHOR]

The fundamental function of a cellular manufacturing system (CMS) is based on the definition and recognition of the type of similarity among the parts that should be produced in a planning period. Cell formation (CF) and cell/machine layouts are two major steps in implementing the CMS design. This paper aims to propose a new mathematical nonlinear programming model for cell formation that employs the rectilinear distance concept to determine layout in a continuous space. In the proposed model, the benefits of cellular layout consideration are used, and the objective function computes the cost of cell reconfiguration and the costs of intra-cell and inter-cell material handling movements. Due to its problem complexity, a genetic algorithm (GA) and a particle swarm optimization (PSO) algorithm are proposed to solve the problem. To address the efficiency of the linearized model and solution methods, the production information of a real case study is used and 30 test problems in different dimensions are presented. Design/methodology/approach: In this paper, a mathematical programming model of cell formation and cell layout has been proposed in a continuous space, using the concept of rectilinear distance. In the proposed model, production information similar to the production flow between machines, alternative process routing, cells capacity, and the inter-cell and intra-cell transportation costs has been considered. Due to the nature and complexity of the proposed model, two metaheuristic algorithms, i.e., GA and PSO have been also developed for larger problems. Findings: In this paper a real case study in the BATA company was studied and the result of configuration was illustrated. By computing the efficiency of the linearized model and solution methods, the production information of a real case study was used and 30 test problems in different dimensions were presented. Findings highlighted the high efficiency of the genetic algorithm in solving large-scale problems. Research limitations/implications: Issues such as assuming similar dimensions for machines or their constant availability are considered as the limitations of this study. For future research, the following subjects can be attractive and the present study can provide the necessary background for researchers who seek to work on such subjects: - Considering unequal dimensions for machines; in the proposed model, machines were considered as squares of equal area with unit dimension. To obtain a more appropriate schema from the space of a job shop, machines’ dimensions can be assumed as the input parameters. - Developing probabilistic models and fuzzy model factors (e.g., available machines, operation time, costs, transportation time, and demand for each part) can be considered fuzzy or probabilistic. - To make the model more realistic, production data such as setup times and holding inventory between periods can be incorporated. Also, the proposed model can be integrated with the scheduling problem. Practical implications: CMS, which is the most important application of GT, overcomes the inefficiency of traditional approaches by reducing transportation time and distance. A flow shop layout has high efficiency in a mass production system, while a job shop is a very flexible system for producing various parts. Each of these systems does not have any other benefits. The CMS is an approach between the two manufacturing systems and aims to improve flexibility and efficiency to produce manufacturing groups in different sizes. In a CMS, machines and parts assignment to cells must impose a minimum cost on the system. Due to the practical nature of the proposed mathematical model, a real case was studied in which, the production information of the BATA company was used. Originality/value: In this study, a new non-linear mixed-integer programming model was proposed which considered the simultaneous cell formation and intra-cell and inter-cell layouts in a continuous space. The model aimed to determine the cell formation and the intra and inter-cell layout concurrently in a way that the total transportation cost of parts and the reconfiguration cost of cells were minimized. The proposed model attempted at calculating the material handling costs realistically. The material handling cost was computed based on the actual location of machines and cells on the shop floor regarding the dimensions of equal-sized machines. Handling both intra/intercellular materials using batch sizes for transferring parts was taken into account in calculating the transportation cost. The transportation cost was calculated based on the rectilinear travel distance, according to the center-to-center interval among machines. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to design and regulate the Adaptive Neural Fuzzy Inference Systems (ANFIS) of supplier development, determine the importance of different categories of supplier development (SD), and suggest appropriate activities based on the results for the development of suppliers in the automotive industry. Design/methodology/approach: To design ANFIS, Grid Partitioning, Subtractive Clustering, and FCM have been used. Then, they have been regulated using Back Propagation (BP), Hybrid, Ant Colony Optimization (ACO), Differential Evolution (DE), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO) methods. A five-step procedure has been used for sensitivity analysis of the supplier development categories. By comparing the results of the regulated systems, the most appropriate ones were selected. Also, based on the supplier development score in different categories separately, the supplier development score was predicted for 53 strategic suppliers in the automotive industry. By sensitivity analysis, SD-related categories were prioritized to guide automotive industry manufacturers to use SD-related activities. Findings: Findings indicated that the FCM compared to the other two methods; meta-heuristic regulation methods compared to BP and Hybrid, and ACO, DE, and GA compared to PSO led to better results. The ACO in all systems, the DE in four systems, and the GA in two categories were identified as the dominant methods, while the PSO was not dominant in any of the categories. This finding implies the priority of meta-heuristic algorithms as ACO> DE> GA> PSO, based on the data of this study. The results of the correlation between the scores of the ANFIS and the average scores of the experts show that the designed ANFIS has high accuracy. Practical implications: The results of this study will direct manufacturers' investments and direct involvement in SD. The findings encourage manufacturers and suppliers of the Iranian automotive industry first to activities related to the development of environmental capabilities and then activities related to the development of three other categories. The managers of Iran's automotive industry are suggested to apply the activities related to the development of suppliers' environmental capabilities. These activities include evaluating the supplier's environmental performance and feedback, sharing environmental information, ethics and social responsibility, obtaining environmental and social certifications, developing programs to improve the quality of life of target communities, green procurement, and environmental awareness, logistics activities Inversion, and joint efforts to improve performance are sustainable. Originality/value: This study was one of the first in-house studies to compare the results of metaheuristic algorithms compatible with ANFIS in the field of SD. In addition, in terms of implementation, it offered suitable SD activities to car manufacturers. [ABSTRACT FROM AUTHOR]

Optimization is a process that has long been considered by researchers in various fields and its methods have been utilized to increase productivity while reducing costs. Moreover, it is essential to achieve simultaneously several contradictory goals. In control engineering, optimizing controller parameters to attain several different goals could be considered as a significant challenge. In this paper, a fractional-order PID controller is designed for a training helicopter with two DC motors, called Twin-Rotor Multi Input Multi Output System (TRMS). The design of this controller is based on the optimization of different objective functions with metaheuristic multiobjective optimization algorithms. Finally, their Pareto front and different evaluation criteria such as Spacing Metric and Non- uniformity of Pareto Front are employed to compare the performance of these algorithms for optimization of controller parameters on the decoupled TRMS system. The results show the superiority of the proposed multi-objective fractional-order PID controller for the TRMS system. [ABSTRACT FROM AUTHOR]

Hub location problem is one of the new issues in location problems. This kind of location problem is widely used in transportation systems. In this paper, we investigate p-hub center location allocation problem under capacity constraint. The aim of the proposed model is to determine the location of hub nodes and the allocation of non-hub nodes to the hub in such a way that the maximum traveling time is minimized. In addition, since the problem is an NP hard problem, two metaheuristic algorithms including simulated annealing algorithm and ant colony are developed for solving large size real world problems. The performances of the proposed algorithms are examined via some numerical examples taken from known related benchmark sets (AP dataset). The best solutions found using metaheuristic algorithms are also compare to the results achieved using Lingo software. The results demonstrate that the proposed algorithms are able to find optimum or near optimum solutions in acceptable run times. [ABSTRACT FROM AUTHOR]

In the single-mode resource-constrained project scheduling problem, it is assumed that each activity has a specified known execution time and resource consumption can be done only in one way. In practice, there are many cases in which the make span can be reduced by providing additional resources activities. In this case, each activity can be done in one of the procedures, which is called the multi-mode resource-constrained project scheduling. In this paper, the problem includes determination of the basic schedule for the project activities which may be done in several models and the precedence relations are met, While the project make-span, cost and resource fluctuations are minimal. In this research project scheduling problem network will model using ED simulation software and the results of the simulation and a meta-heuristic algorithm has been compared. Finally, management strategies to optimize the scheduling, i.e such minimize total time, cost and resource leveling, will be offered. [ABSTRACT FROM AUTHOR]