Search

In this paper smart shoes for dementia care using embedded boards and Low Power Wide Area technology and their application software are implemented. The communication board composed of Cortex-M3 board and LoRa module is embedded into groove made in outsole of smart shoes. Including the mold, the shoe outsole was manufactured by hand. By using application software and embedded board, caregiver can track the position of dementia patient using GPS and LoRa network. The location tracking and data transmission operations of smart shoes have been successfully verified in the outdoor environment. The smart shoes of this paper are applicable to a safety device to prevent the disappearance of demented patients through results of experiments and if bigdata is collected and analyzed by deep-learning, it may be helpful to analyze the predictive path of dementia patients or the pattern of dementia. [ABSTRACT FROM AUTHOR]

Currently, advanced national research network groups are continuously conducting R&D for the requirement to provide SDN/NFV-based network automation and intelligence technology for R&E users. In addition, the requirement for providing large-scale data transmission with the high performance networking facility, compared to general network environments, is gradually increasing in the advanced national research networks. Accordingly, in this paper, we propose an open API-based virtual network provisioning automation platform for large data transmission researched and developed to respond to the networking requirements of the national research network and present the implementation results. The platform includes the KREONET-S VDN system that provides SDN-based network virtualization technology, and the Kubernetes system that provides container-oriented server virtualization technology, and the Globus Online, a high-performance data transmission system. In this paper, the environment configurations, the system implemetation results for the interworking between the heterogeneous systems, and the automated virtual network provisioning implementation results are presented. [ABSTRACT FROM AUTHOR]

As research on IoUT using underwater communication is actively progressing worldwide, in this study, research was conducted to increase the transmission rate by utilizing LFM (Linear Frequency Modulation) signals using chirp signals, one of the data transmission techniques. In this paper, we propose a system that combines the corresponding LFM signal into Up-LFM, Down-LFM, and Up&Down-LFM. The proposed system transmits and receives multiple bits in one chirp signal. The simulated channel environment is an AWGN (Additive White Gaussian Noise) channel, and the first simulation result showed that the performance of Up&Down-LFM was superior by about 2.1dB on average compared to Up-LFM and Down-LFM, and BPSK (Binary Phase Shift Keying), the performance comparison result with QPSK (Quadrature Phase Shift Keying) was excellent by about 5.86dB on average. The second simulation result confirmed a performance difference of about 5dB between Tx 1 bits and 5 bits at frequency sampling 50kHz, about 4dB at 100kHz, and 5dB at 200kHz. [ABSTRACT FROM AUTHOR]

The sophistication and diversification of mission equipment for surveillance and reconnaissance is leading to a demand for large-capacity public data links. Overseas, a T4 class(274Mbps) common data link was applied to the Global hwak, a high-altitude unmanned aerial vehicle, and various research and development are being conducted in Korea. In this paper, we propose a structure in which pilot is additionally applied to improve SNR performance while minimizing data transmission rate loss in the DVB-S2 frame structure, which is a european satellite broadcasting standard, for high-capacity transmission of T4 class or higher in the common data link. For the performance evaluation of the proposed structure, the performance of the DVB-S2 was compared and analyzed by simulating the UAV data link channel environment. As a result of simulation, 0.15% of transmission rate loss occurred at T4 class transmission rate compared to DVB-S2 in the proposed structure, but improved SNR reception performance of 0.2~0.3dB was confirmed in the UAV channel environment. [ABSTRACT FROM AUTHOR]

As the interest in the 4th industrial revolution and metaverse increases, metaverse with multi edge structure is proposed and noted. Metaverse is a structure that can create digital doctor-like system through a large amount of image processing and data transmission in a multi edge system. Since metaverse application requires calculating performance, which can reconstruct 3-D space, edge hardware’s insufficient calculating performance has been a problem. To provide streamable AI software in runtime, image processing, and data transmission, which is edge’s loads, needs to be lightweight. Also lightweight at the edge leads to power consumption reduction of the entire metaverse application system. In this paper, we propose collaborative edge-cloud image processing with remote image processing method and Region of Interest (ROI) to overcome edge’s power performance and build streamable and runtime executable AI software. The proposed structure was implemented using a PC and an embedded board, and the reduction of time, power, and network communications were verified. [ABSTRACT FROM AUTHOR]

Recently, the necessity of rapid response to social problems such as disasters and quarantine arising from the complex and diverse social structures has emerged. As the number of large buildings increases, large-scale human damage is expected in the event of a disaster such as fire. To solve this problem, efficient control must be achieved through interfacing with various equipment and facilities installed inside the building. In this paper, we intend to study the interface method for various facilities in the building for efficient control. In detail, the facility standard model is defined by examining the status and specification of building. In addition, we intend to design and propose a standard facility communication data frame to support the protocol applicable to this model. [ABSTRACT FROM AUTHOR]

Cognitive Radio Ad-Hoc Networks (CRAHNs) enable to overcome the shortage of frequency resources due to the increase of radio services. In order to avoid interference with the primary user in CRANH, channel sensing to check the idle channel is required, and when the primary user appears, the time delay due to handover should be minimized through fast idle channel selection. In this paper, throughput was improved by reducing the number of channel sensing and preferentially sensing a channel with a high probability of being idle, using reinforcement learning. In addition, we proposed a multi-channel MAC (Medium Access Control) protocol that can minimize the possibility of collision with the primary user by sensing the channel at the time of data transmission without performing periodic sensing. The performance was compared and analyzed through computer simulation. [ABSTRACT FROM AUTHOR]

Large sensor networks require the collection and analysis of data from a large number of sensors. The number of sensors that can be controlled per micro controller is limited. In this paper, we propose how to aggregate sensor data from a large number of sensors using a large number of microcontrollers and multiple bridge nodes, and design and implement an efficient communication system for sensor data collection. Bridge nodes aggregate data from multiple microcontrollers using SPI communication, and transfer the aggregated data to PC servers using wireless TCP/IP communication. In this paper, the communication system was constructed using the Open H/W Aduo Mini and ESP8266 and performance of the system was analyzed. The performance analysis results showed that more than 30 sensing data can be collected per second from more than 700 sensors. [ABSTRACT FROM AUTHOR]

To maximize performance in a high-performance multi- core processor system. it is essential to enable effective data communication between processing cores. Data communication between processor nodes can be broadly classified into collective and point-to-point communications. Collective communication comprises scattering and gathering. This paper presents a efficient message scattering and gathering based on processing node status. In the proposed algorithms, the transmission order is changed according to the data size of the pre-existing communication, to reduce the waiting time required until the collective communications begin. From the simulation, the performances of the proposed message scattering and gathering algorithms were improved by approximately 71.41% and 69.84%. [ABSTRACT FROM AUTHOR]

This paper proposes reinforcement learning to solve the node-disjoint path problem which establishes multipath for reliable data transmission in wireless ad-hoc networks. The node-disjoint path problem is a problem of determining a plurality of paths so that the intermediate nodes do not overlap between the source and the destination. In this paper, we propose an optimization method considering transmission distance in a large-scale wireless ad-hoc network using Q-learning in reinforcement learning, one of machine learning. Especially, in order to solve the node-disjoint path problem in a large-scale wireless ad-hoc network, a large amount of computation is required, but the proposed reinforcement learning efficiently obtains appropriate results by learning the path. The performance of the proposed reinforcement learning is evaluated from the viewpoint of transmission distance to establish two node-disjoint paths. From the evaluation results, it showed better performance in the transmission distance compared with the conventional simulated annealing. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new SC-FDE (single carrier frequency domain equalization) structure to cope with narrow band interference signals or jammers and reduce pilot overhead. The conventional SC-FDE structure has a problem that the receiver performance degrades severely due to difficulty in time-domain channel estimation when narrow band jammers exist. In addition, the spectral efficiency is lowered by transmitting pilot at every SC-FDE block to estimate channel response. In order to overcome those problems, the proposed structure is devised to estimate frequency domain channel directly without time In the EH-WSN (Energy harvesting wireless sensor network), a MAC (medium access control) protocol is required to select a relay node considering the power status of a node. Existing EH-WSN studies emphasize the power aspect, so it does not consider the QoS like the urgency of the sensed data. The required power and transmission delay must be changed according to the urgency so that the medium access control according to the data QoS can be performed. In case of relay node, relaying data without consideration of data urgency and node power may cause delay due to power shortage in case of urgent data. In this paper, we designed a MAC protocol that minimizes the power shortage that can occur during emergency data generation. For this, relay node requirements are set differently according to the urgency of data. The performance was analyzed through simulation. Simulation results show the reduced latency and improved reliability of urgent data transmission. [ABSTRACT FROM AUTHOR]

IoT devices are widely used in network construction and are increasing. If necessary, heterogeneous IoT devices are used for data transmission. This paper proposes to prevent the method of data loss due to differences in throughput when the local network is constructed by Bluetooth 5 and long range network does by LoRa(Long Range). Data loss occur when the data transmits through LoRa, due to the throughputs of Bluetooth 5 faster than that of LoRa. The prevent method proposed by this paper can apply not only Bluetooth 5 and LoRa but heterogeneous IoT devices and expect to prevent data loss due to differences in throughput between heterogeneous IoT devices. Also, this paper shows the simulation result by applying the proposed avoid method. In this paper, two way to the preventive method shows the data transmission ratio and amount of memory that of necessity. [ABSTRACT FROM AUTHOR]

As embedded system are used widely and variously, multi-edge system, which multiple edges gather and perform complex operations together, is actively operating. In a multi-edge system, it often occurs that an abnormal operation at one edge is transferred to another edge or the entire system goes down. It is necessary to determine and control edge anomalies in order to prevent system down, but this can be a heavy burden on the resource-limited edge. As a solution to this, we use power consumption data to check the state of the edge device and transmit it based on a QRcode to check and control errors at the server. The architecture proposed in this paper is implemented using 'chip-whisperer' to measure the power consumption of the edge and 'Raspberry Pi 3' to implement the server. As a result, the proposed architecture server showed successful data transmission and error determination without additional load appearing at the edge. [ABSTRACT FROM AUTHOR]

In this paper, we propose a general cross-chain solution based on the idea of modularity, abstraction, and layering, which decoupling the cross-chain function from the consensus algorithm and specific application logic, and utilize a Merkle proof to ensure the validity and legality of cross-chain operations. Since the underlying implementations of homogeneous and heterogeneous blockchains are different, we treat them separately. For homogeneous blockchains, we suggest a TCP-like cross-chain transport protocol (CCTP). While for heterogeneous blockchains, we present a method to construct the relay chain to realize the cross-chain function. The proposed scheme can enable the correct, effective, reliable, orderly, and timely transmission of cross-chain data. However, the essential difference between the operations within a single blockchain and the interoperability between different blockchains is that the trust domain is different. Cross-chain interoperation itself breaks the completeness of the blockchain，therefore, some efficiency and safety must sacrifice to trade-off. [ABSTRACT FROM AUTHOR]

Recently, many studies on VNDN technology have been conducted to graft Named Data Networking (NDN) into VANET as a core network technology. VNDN can use the content name to deliver various infotainment application content data through name-based forwarding. When VNDN is used as a communication technology for infotainment applications in connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication. It can overcome the limitations of connected vehicle infotainment application service technology based on the host-centric current Internet, such as security attack/hacking, performance degradation in long-distance data transmission, frequent data cut-off. In this paper, we present the main functions provided by VNDN technology, and systematically analyze and organize the issues necessary to realize infotainment application services for connected vehicles in the VNDN environment. Based on this, it can be utilized as basic information necessary to establish infotainment application requirements in VNDN environment. [ABSTRACT FROM AUTHOR]

TCP communication and packet communication require transmission control technology to ensure high quality and high reliability. However, in the case of real-time data transmission, an inefficient transmission problem occurs. In order to overcome this problem and transmit the packet reliability, in general, early congestion control using the buffer level as an index was used. Control of the congestion control point and the cancellation point is delayed because the point at which congestion is controlled is based on the buffer level. Therefore, in this paper, not only the buffer level indicator, but also the ideal buffer level, which determines the packet discard probability, is classified so that the transmission rate and buffer level that measure network congestion are close to the level above the optimal setting. As a result, it was shown that the average buffer level can be directly controlled by maintaining the average buffer level by the ideal buffer level set in the experiment to prove the proposed method. [ABSTRACT FROM AUTHOR]

In modern society, various digital communication equipment is being used due to the influence of the 4th industrial revolution. Accordingly, interest in removing noise generated in a data transmission process is increasing, and research is being conducted to efficiently reconstruct an image. In this paper, we propose a filtering algorithm to remove the AWGN generated in the digital image transmission process. The proposed algorithm classifies pixels with high similarity by selecting regions with similar patterns around the input pixels according to block matching to remove the AWGN that appears strongly in the image. The selected pixel determines the estimated value by applying the weight obtained by the local steering kernel, and obtains the final output by adding or subtracting the input pixel value according to the standard deviation of the center mask. In order to evaluate the proposed algorithm, it was simulated with existing AWGN removal algorithms, and comparative analysis was performed using enlarged images and PSNR. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method to implement an IoT-based sensor network for each workplace of a shipyard. Here, at the most common welding workplace in shipyards, the shipbuilding blocks are used as a communication medium to transmit information such as the worker's location, welding progress, and working hour to a server using LoRa and powerline communication. To achieve the data communication, inductive couplers and hybrid modems have been manufactured and installed on wire feeders and pin jigs to establish a sensor network. As a result of field test, the proposed system shows a success rate of data transmission and a rate of successful recognition of worker's location of about 98% or more. In addition, the process management system platform can record and display the work process data generated at the field in real time. The proposed system can be a starting point for enhancing the competitiveness of Korean shipbuilding industry through the establishment of a smart shipyard. [ABSTRACT FROM AUTHOR]

In modern society, various digital communication equipments are being used due to the influence of the 4th industrial revolution, and accordingly, interest in removing noise generated in the data transmission process is increasing. In this paper, we propose a filtering algorithm to remove AWGN generated during digital image transmission. The proposed algorithm removes noise based on mask matching to preserve information such as the boundary of an image, and uses pixel values with similar patterns according to the pattern of the input pixel value and the surrounding pixels for output calculation. To evaluate the proposed algorithm, we simulated with existing AWGN removal algorithms, and analyzed using enlarged image and PSNR comparison. The proposed algorithm has superior AWGN removal performance compared to the existing method, and is particularly effective in images with strong noise intensity of AWGN. [ABSTRACT FROM AUTHOR]

The paradigm of Internet-of-things(IoT) systems is changing from a cloud-based system to an edge-based system to solve delays caused by network congestion, server overload and security issues due to data transmission. However, edge-based IoT systems have fatal weaknesses such as lack of performance and flexibility due to various limitations. To improve performance, application-specific hardware can be implemented in the edge device, but performance cannot be improved except for specific applications due to a fixed function. This paper introduces a edge-centric metamorphic IoT(mIoT) platform that can use a variety of hardware through on-demand partial reconfiguration despite the limited hardware resources of the edge device, so we can increase the performance and flexibility of the edge device. According to the experimental results, the edge-centric mIoT platform that executes the reconfiguration algorithm at the edge was able to reduce the number of server accesses by up to 82.2% compared to previous studies in which the reconfiguration algorithm was executed on the server. [ABSTRACT FROM AUTHOR]

The DSRC method currently in use has a limitation in providing various ITS services by short-distance wireless communication. Therefore, the WAVE/DSRC hybrid wireless platform, which was developed by applying WAVE technology in-house, improved the data transmission speed and greatly expanded the transmission range. The summary H/W and S/W technologies are summarized in the text. In this paper, various services such as BSM, SPAT, MAP, and road video information related to ITS services have been implemented, and various tests are conducted based on scenarios considering the environment in the actual field by utilizing the previously developed WAVE/DSRC composite wireless platform. Through this emulation process in the real field, we were able to verify the excellence of the WAVE/DSRC composite wireless platform once again and predict the usefulness and potential of development services in real field operations. [ABSTRACT FROM AUTHOR]

AThis paper measured real sea area for performance analysis according to distance from west sea and south sea of Korea. The performance of the underwater OFDM system was analyzed by comparing the performance of the West and South Seas by adjusting the number of data repetitive transmissions and the pilot symbol placement interval parameters based on the real-sea data measured from the distance and Data rate of the West and South Sea vessels. In conclusion, when comparing the performance of the South Sea at the Data rate and distance, the BER performance of the South Sea was similar at the 5 km South Sea and 1 km West Sea under the same conditions. Placement interval of pilot symbol at 10 km of South Sea and 3 km of West Sea is      and the number of times the PRB is        repeated. We confirmed that we can send high data over long distances in the South Sea. [ABSTRACT FROM AUTHOR]

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring. [ABSTRACT FROM AUTHOR]

In this paper, inductive couplers realizing broadband powerline communication (PLC) are fabricated using Fe-based nanocrystalline alloy and their performance is analyzed. As a result of the field tests using the distribution automation system (DAS), the couplers achieve comparatively excellent data communication in the principal frequency band of broadband PLC although there is a difference in communication rate depending on the presence or absence of a branch. In addition, it has been confirmed that the communication speed is maintained for a real-time transmission even in a high current environment although there is a difference in the transmission rate depending on the distance. Hence, it is considered that the inductive couplers can be used as a core device to realize the intelligent power network by exploiting them for the monitoring and remote controlling of the power plant equipments for the DAS located in the inaccessible areas. [ABSTRACT FROM AUTHOR]

Recently, 5G cellular systems have been attracted great attention as a key enabler for Industry 4.0. In this paper, we propose a novel random access based on pilot-assisted opportunistic transmission to support internet-of-things (IoT) scenario in cellular networks. A key feature of our proposed scheme is to enable each of IoT devices to attempt opportunistic transmission of its data packet in Step 3 with randomly selected uplink pilot signal. Both the opportunistic transmission and the pilot randomization in Step 3 are effective to significantly mitigate the occurrence of packet collisions. We mathematically analyze our proposed scheme in terms of packet collision probability and uplink resource efficiency. Through simulations, we verify the validity of our analysis and evaluate the performance of our proposed scheme. Numerical results show that our proposed scheme outperforms other competitive schemes. [ABSTRACT FROM AUTHOR]